net: dsa: lan9303: Add STP ALR entry on port 0

STP BPDUs arriving on user ports must sent to CPU port only,
for processing by the SW bridge.

Add an ALR entry with STP state override to fix that.
Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/lan9303-core.c

@@ -773,6 +773,7 @@ static int lan9303_separate_ports(struct lan9303 *chip)
 {
 	int ret;
 
+	lan9303_alr_del_port(chip, eth_stp_addr, 0);
 	ret = lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_MIRROR,
 				LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT0 |
 				LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT1 |
@@ -797,6 +798,7 @@ static void lan9303_bridge_ports(struct lan9303 *chip)
 
 	lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE,
 				 chip->swe_port_state);
+	lan9303_alr_add_port(chip, eth_stp_addr, 0, true);
 }
 
 static int lan9303_handle_reset(struct lan9303 *chip)

include/linux/dsa/lan9303.h

@@ -34,3 +34,5 @@ struct lan9303 {
 	 **/
 	struct lan9303_alr_cache_entry alr_cache[LAN9303_NUM_ALR_RECORDS];
 };
+
+#define eth_stp_addr eth_reserved_addr_base

net/dsa/tag_lan9303.c

@@ -42,7 +42,6 @@
 #define LAN9303_TAG_LEN 4
 # define LAN9303_TAG_TX_USE_ALR BIT(3)
 # define LAN9303_TAG_TX_STP_OVERRIDE BIT(4)
-#define eth_stp_addr eth_reserved_addr_base
 
 /* Decide whether to transmit using ALR lookup, or transmit directly to
  * port using tag. ALR learning is performed only when using ALR lookup.