Commit e942d619 authored by Scott Jiang's avatar Scott Jiang Committed by Bob Liu

bf609: add adv7511 display support

Signed-off-by: default avatarScott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: default avatarBob Liu <lliubbo@gmail.com>
parent acb3166d
...@@ -974,17 +974,17 @@ static struct adv7842_platform_data adv7842_data = { ...@@ -974,17 +974,17 @@ static struct adv7842_platform_data adv7842_data = {
.prim_mode = ADV7842_PRIM_MODE_SDP, .prim_mode = ADV7842_PRIM_MODE_SDP,
.vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1, .vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1,
.inp_color_space = ADV7842_INP_COLOR_SPACE_AUTO, .inp_color_space = ADV7842_INP_COLOR_SPACE_AUTO,
.i2c_sdp_io = 0x30, .i2c_sdp_io = 0x40,
.i2c_sdp = 0x31, .i2c_sdp = 0x41,
.i2c_cp = 0x32, .i2c_cp = 0x42,
.i2c_vdp = 0x33, .i2c_vdp = 0x43,
.i2c_afe = 0x34, .i2c_afe = 0x44,
.i2c_hdmi = 0x35, .i2c_hdmi = 0x45,
.i2c_repeater = 0x36, .i2c_repeater = 0x46,
.i2c_edid = 0x37, .i2c_edid = 0x47,
.i2c_infoframe = 0x39, .i2c_infoframe = 0x48,
.i2c_cec = 0x3a, .i2c_cec = 0x49,
.i2c_avlink = 0x3b, .i2c_avlink = 0x4a,
.i2c_ex = 0x26, .i2c_ex = 0x26,
}; };
...@@ -1013,6 +1013,80 @@ static struct platform_device bfin_capture_device = { ...@@ -1013,6 +1013,80 @@ static struct platform_device bfin_capture_device = {
}; };
#endif #endif
#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
|| defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
#include <linux/videodev2.h>
#include <media/blackfin/bfin_display.h>
#include <media/blackfin/ppi.h>
static const unsigned short ppi_req_disp[] = {
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
0,
};
static const struct ppi_info ppi_info = {
.type = PPI_TYPE_EPPI3,
.dma_ch = CH_EPPI0_CH0,
.irq_err = IRQ_EPPI0_STAT,
.base = (void __iomem *)EPPI0_STAT,
.pin_req = ppi_req_disp,
};
#if defined(CONFIG_VIDEO_ADV7511) \
|| defined(CONFIG_VIDEO_ADV7511_MODULE)
#include <media/adv7511.h>
static struct v4l2_output adv7511_outputs[] = {
{
.index = 0,
.name = "HDMI",
.type = V4L2_INPUT_TYPE_CAMERA,
.capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS,
},
};
static struct disp_route adv7511_routes[] = {
{
.output = 0,
},
};
static struct adv7511_platform_data adv7511_data = {
.edid_addr = 0x7e,
.i2c_ex = 0x25,
};
static struct bfin_display_config bfin_display_data = {
.card_name = "BF609",
.outputs = adv7511_outputs,
.num_outputs = ARRAY_SIZE(adv7511_outputs),
.routes = adv7511_routes,
.i2c_adapter_id = 0,
.board_info = {
.type = "adv7511",
.addr = 0x39,
.platform_data = (void *)&adv7511_data,
},
.ppi_info = &ppi_info,
.ppi_control = (EPPI_CTL_SPLTWRD | PACK_EN | DLEN_16
| EPPI_CTL_FS1LO_FS2LO | EPPI_CTL_POLC3
| EPPI_CTL_IFSGEN | EPPI_CTL_SYNC2
| EPPI_CTL_NON656 | EPPI_CTL_DIR),
};
#endif
static struct platform_device bfin_display_device = {
.name = "bfin_display",
.dev = {
.platform_data = &bfin_display_data,
},
};
#endif
#if defined(CONFIG_BFIN_CRC) #if defined(CONFIG_BFIN_CRC)
#define BFIN_CRC_NAME "bfin-crc" #define BFIN_CRC_NAME "bfin-crc"
...@@ -1477,6 +1551,11 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -1477,6 +1551,11 @@ static struct platform_device *ezkit_devices[] __initdata = {
|| defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE) || defined(CONFIG_VIDEO_BLACKFIN_CAPTURE_MODULE)
&bfin_capture_device, &bfin_capture_device,
#endif #endif
#if defined(CONFIG_VIDEO_BLACKFIN_DISPLAY) \
|| defined(CONFIG_VIDEO_BLACKFIN_DISPLAY_MODULE)
&bfin_display_device,
#endif
}; };
static int __init ezkit_init(void) static int __init ezkit_init(void)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment