Commit e943dd88 authored by Lijo Lazar's avatar Lijo Lazar Committed by Alex Deucher

drm/amd/pm: Fix showing incorrect frequencies on aldebaran

v1: Use the current and custom pstate frequencies to track the current and
user-set min/max values in manual and determinism mode. Previously, only
actual_* value was used to track the currrent and user requested value.
The value will get reassigned whenever user requests a new value with
pp_od_clk_voltage node. Hence it will show incorrect values when user
requests an invalid value or tries a partial request without committing
the values. Separating out to custom and current variable fixes such
issues.

v2: Remove redundant if-else check
Signed-off-by: default avatarLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: default avatarKevin Wang <kevin1.wang@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent eed13b0e
......@@ -78,8 +78,6 @@
#define smnPCIE_ESM_CTRL 0x111003D0
#define CLOCK_VALID (1 << 31)
static const struct cmn2asic_msg_mapping aldebaran_message_map[SMU_MSG_MAX_COUNT] = {
MSG_MAP(TestMessage, PPSMC_MSG_TestMessage, 0),
MSG_MAP(GetSmuVersion, PPSMC_MSG_GetSmuVersion, 1),
......@@ -455,12 +453,18 @@ static int aldebaran_populate_umd_state_clk(struct smu_context *smu)
pstate_table->gfxclk_pstate.min = gfx_table->min;
pstate_table->gfxclk_pstate.peak = gfx_table->max;
pstate_table->gfxclk_pstate.curr.min = gfx_table->min;
pstate_table->gfxclk_pstate.curr.max = gfx_table->max;
pstate_table->uclk_pstate.min = mem_table->min;
pstate_table->uclk_pstate.peak = mem_table->max;
pstate_table->uclk_pstate.curr.min = mem_table->min;
pstate_table->uclk_pstate.curr.max = mem_table->max;
pstate_table->socclk_pstate.min = soc_table->min;
pstate_table->socclk_pstate.peak = soc_table->max;
pstate_table->socclk_pstate.curr.min = soc_table->min;
pstate_table->socclk_pstate.curr.max = soc_table->max;
if (gfx_table->count > ALDEBARAN_UMD_PSTATE_GFXCLK_LEVEL &&
mem_table->count > ALDEBARAN_UMD_PSTATE_MCLK_LEVEL &&
......@@ -669,6 +673,7 @@ static int aldebaran_print_clk_levels(struct smu_context *smu,
{
int i, now, size = 0;
int ret = 0;
struct smu_umd_pstate_table *pstate_table = &smu->pstate_table;
struct pp_clock_levels_with_latency clocks;
struct smu_13_0_dpm_table *single_dpm_table;
struct smu_dpm_context *smu_dpm = &smu->smu_dpm;
......@@ -703,12 +708,8 @@ static int aldebaran_print_clk_levels(struct smu_context *smu,
display_levels = clocks.num_levels;
min_clk = smu->gfx_actual_hard_min_freq & CLOCK_VALID ?
smu->gfx_actual_hard_min_freq & ~CLOCK_VALID :
single_dpm_table->dpm_levels[0].value;
max_clk = smu->gfx_actual_soft_max_freq & CLOCK_VALID ?
smu->gfx_actual_soft_max_freq & ~CLOCK_VALID :
single_dpm_table->dpm_levels[1].value;
min_clk = pstate_table->gfxclk_pstate.curr.min;
max_clk = pstate_table->gfxclk_pstate.curr.max;
freq_values[0] = min_clk;
freq_values[1] = max_clk;
......@@ -1134,9 +1135,6 @@ static int aldebaran_set_performance_level(struct smu_context *smu,
&& (level != AMD_DPM_FORCED_LEVEL_PERF_DETERMINISM))
smu_cmn_send_smc_msg(smu, SMU_MSG_DisableDeterminism, NULL);
/* Reset user min/max gfx clock */
smu->gfx_actual_hard_min_freq = 0;
smu->gfx_actual_soft_max_freq = 0;
switch (level) {
......@@ -1163,6 +1161,7 @@ static int aldebaran_set_soft_freq_limited_range(struct smu_context *smu,
{
struct smu_dpm_context *smu_dpm = &(smu->smu_dpm);
struct smu_13_0_dpm_context *dpm_context = smu_dpm->dpm_context;
struct smu_umd_pstate_table *pstate_table = &smu->pstate_table;
struct amdgpu_device *adev = smu->adev;
uint32_t min_clk;
uint32_t max_clk;
......@@ -1176,15 +1175,23 @@ static int aldebaran_set_soft_freq_limited_range(struct smu_context *smu,
return -EINVAL;
if (smu_dpm->dpm_level == AMD_DPM_FORCED_LEVEL_MANUAL) {
min_clk = max(min, dpm_context->dpm_tables.gfx_table.min);
max_clk = min(max, dpm_context->dpm_tables.gfx_table.max);
ret = smu_v13_0_set_soft_freq_limited_range(smu, SMU_GFXCLK,
min_clk, max_clk);
if (min >= max) {
dev_err(smu->adev->dev,
"Minimum GFX clk should be less than the maximum allowed clock\n");
return -EINVAL;
}
if ((min == pstate_table->gfxclk_pstate.curr.min) &&
(max == pstate_table->gfxclk_pstate.curr.max))
return 0;
ret = smu_v13_0_set_soft_freq_limited_range(smu, SMU_GFXCLK,
min, max);
if (!ret) {
smu->gfx_actual_hard_min_freq = min_clk | CLOCK_VALID;
smu->gfx_actual_soft_max_freq = max_clk | CLOCK_VALID;
pstate_table->gfxclk_pstate.curr.min = min;
pstate_table->gfxclk_pstate.curr.max = max;
}
return ret;
}
......@@ -1209,10 +1216,8 @@ static int aldebaran_set_soft_freq_limited_range(struct smu_context *smu,
dev_err(adev->dev,
"Failed to enable determinism at GFX clock %d MHz\n", max);
} else {
smu->gfx_actual_hard_min_freq =
min_clk | CLOCK_VALID;
smu->gfx_actual_soft_max_freq =
max | CLOCK_VALID;
pstate_table->gfxclk_pstate.curr.min = min_clk;
pstate_table->gfxclk_pstate.curr.max = max;
}
}
}
......@@ -1225,6 +1230,7 @@ static int aldebaran_usr_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_
{
struct smu_dpm_context *smu_dpm = &(smu->smu_dpm);
struct smu_13_0_dpm_context *dpm_context = smu_dpm->dpm_context;
struct smu_umd_pstate_table *pstate_table = &smu->pstate_table;
uint32_t min_clk;
uint32_t max_clk;
int ret = 0;
......@@ -1245,16 +1251,22 @@ static int aldebaran_usr_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_
if (input[1] < dpm_context->dpm_tables.gfx_table.min) {
dev_warn(smu->adev->dev, "Minimum GFX clk (%ld) MHz specified is less than the minimum allowed (%d) MHz\n",
input[1], dpm_context->dpm_tables.gfx_table.min);
pstate_table->gfxclk_pstate.custom.min =
pstate_table->gfxclk_pstate.curr.min;
return -EINVAL;
}
smu->gfx_actual_hard_min_freq = input[1];
pstate_table->gfxclk_pstate.custom.min = input[1];
} else if (input[0] == 1) {
if (input[1] > dpm_context->dpm_tables.gfx_table.max) {
dev_warn(smu->adev->dev, "Maximum GFX clk (%ld) MHz specified is greater than the maximum allowed (%d) MHz\n",
input[1], dpm_context->dpm_tables.gfx_table.max);
pstate_table->gfxclk_pstate.custom.max =
pstate_table->gfxclk_pstate.curr.max;
return -EINVAL;
}
smu->gfx_actual_soft_max_freq = input[1];
pstate_table->gfxclk_pstate.custom.max = input[1];
} else {
return -EINVAL;
}
......@@ -1276,8 +1288,17 @@ static int aldebaran_usr_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_
dev_err(smu->adev->dev, "Input parameter number not correct\n");
return -EINVAL;
} else {
min_clk = smu->gfx_actual_hard_min_freq;
max_clk = smu->gfx_actual_soft_max_freq;
if (!pstate_table->gfxclk_pstate.custom.min)
pstate_table->gfxclk_pstate.custom.min =
pstate_table->gfxclk_pstate.curr.min;
if (!pstate_table->gfxclk_pstate.custom.max)
pstate_table->gfxclk_pstate.custom.max =
pstate_table->gfxclk_pstate.curr.max;
min_clk = pstate_table->gfxclk_pstate.custom.min;
max_clk = pstate_table->gfxclk_pstate.custom.max;
return aldebaran_set_soft_freq_limited_range(smu, SMU_GFXCLK, min_clk, max_clk);
}
break;
......
......@@ -1626,6 +1626,9 @@ int smu_v13_0_set_performance_level(struct smu_context *smu,
sclk_max);
if (ret)
return ret;
pstate_table->gfxclk_pstate.curr.min = sclk_min;
pstate_table->gfxclk_pstate.curr.max = sclk_max;
}
if (mclk_min && mclk_max) {
......@@ -1635,6 +1638,9 @@ int smu_v13_0_set_performance_level(struct smu_context *smu,
mclk_max);
if (ret)
return ret;
pstate_table->uclk_pstate.curr.min = mclk_min;
pstate_table->uclk_pstate.curr.max = mclk_max;
}
if (socclk_min && socclk_max) {
......@@ -1644,6 +1650,9 @@ int smu_v13_0_set_performance_level(struct smu_context *smu,
socclk_max);
if (ret)
return ret;
pstate_table->socclk_pstate.curr.min = socclk_min;
pstate_table->socclk_pstate.curr.max = socclk_max;
}
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment