Merge tag 'fixes-for-v3.15-rc3' of...

Merge tag 'fixes-for-v3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v3.15-rc3

Quite a few fixes this time since I lost v3.15-rc2
window.

Most fixes are MUSB which learned to remove its debugfs directories
properly, got a fix for PHY handling and now knows that it should
make sure its clocks aren't gated before trying to access registers.

ffs got a race fix between ffs_epfile_io() and ffs_func_eps_disable().

dwc3 got a fix for system suspend/resume and now only iterates over
valid endpoints when trying to resize TX fifos.

usb_get_phy() now will properly return an error if try_module_get() fails.

We also have a revert for a NAPI conversion on the ethernet gadget which
was causing a kernel BUG.
Signed-of-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc3/core.c

@@ -821,6 +821,7 @@ static void dwc3_complete(struct device *dev)
 
 	spin_lock_irqsave(&dwc->lock, flags);
 
+	dwc3_event_buffers_setup(dwc);
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 	case USB_DR_MODE_OTG:
@@ -828,7 +829,6 @@ static void dwc3_complete(struct device *dev)
 		/* FALLTHROUGH */
 	case USB_DR_MODE_HOST:
 	default:
-		dwc3_event_buffers_setup(dwc);
 		break;
 	}
 

drivers/usb/dwc3/gadget.c

@@ -187,15 +187,12 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
 	 * improve this algorithm so that we better use the internal
 	 * FIFO space
 	 */
-	for (num = 0; num < DWC3_ENDPOINTS_NUM; num++) {
-		struct dwc3_ep	*dep = dwc->eps[num];
-		int		fifo_number = dep->number >> 1;
+	for (num = 0; num < dwc->num_in_eps; num++) {
+		/* bit0 indicates direction; 1 means IN ep */
+		struct dwc3_ep	*dep = dwc->eps[(num << 1) | 1];
 		int		mult = 1;
 		int		tmp;
 
-		if (!(dep->number & 1))
-			continue;
-
 		if (!(dep->flags & DWC3_EP_ENABLED))
 			continue;
 
@@ -224,8 +221,7 @@ int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc)
 		dev_vdbg(dwc->dev, "%s: Fifo Addr %04x Size %d\n",
 				dep->name, last_fifo_depth, fifo_size & 0xffff);
 
-		dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(fifo_number),
-				fifo_size);
+		dwc3_writel(dwc->regs, DWC3_GTXFIFOSIZ(num), fifo_size);
 
 		last_fifo_depth += (fifo_size & 0xffff);
 	}

drivers/usb/gadget/f_fs.c

@@ -745,6 +745,12 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 		 */
 		struct usb_gadget *gadget = epfile->ffs->gadget;
 
+		spin_lock_irq(&epfile->ffs->eps_lock);
+		/* In the meantime, endpoint got disabled or changed. */
+		if (epfile->ep != ep) {
+			spin_unlock_irq(&epfile->ffs->eps_lock);
+			return -ESHUTDOWN;
+		}
 		/*
 		 * Controller may require buffer size to be aligned to
 		 * maxpacketsize of an out endpoint.
@@ -752,6 +758,7 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 		data_len = io_data->read ?
 			   usb_ep_align_maybe(gadget, ep->ep, io_data->len) :
 			   io_data->len;
+		spin_unlock_irq(&epfile->ffs->eps_lock);
 
 		data = kmalloc(data_len, GFP_KERNEL);
 		if (unlikely(!data))

drivers/usb/gadget/f_rndis.c

@@ -377,7 +377,7 @@ static struct sk_buff *rndis_add_header(struct gether *port,
 	if (skb2)
 		rndis_add_hdr(skb2);
 
-	dev_kfree_skb_any(skb);
+	dev_kfree_skb(skb);
 	return skb2;
 }
 

drivers/usb/gadget/fsl_udc_core.c

@@ -1219,6 +1219,10 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
 	struct fsl_udc *udc;
 
 	udc = container_of(gadget, struct fsl_udc, gadget);
+
+	if (!udc->vbus_active)
+		return -EOPNOTSUPP;
+
 	udc->softconnect = (is_on != 0);
 	if (can_pullup(udc))
 		fsl_writel((fsl_readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
@@ -2532,8 +2536,8 @@ static int __exit fsl_udc_remove(struct platform_device *pdev)
 	if (!udc_controller)
 		return -ENODEV;
 
-	usb_del_gadget_udc(&udc_controller->gadget);
 	udc_controller->done = &done;
+	usb_del_gadget_udc(&udc_controller->gadget);
 
 	fsl_udc_clk_release();
 

drivers/usb/gadget/inode.c

@@ -2043,6 +2043,7 @@ gadgetfs_fill_super (struct super_block *sb, void *opts, int silent)
 		return -ESRCH;
 
 	/* fake probe to determine $CHIP */
+	CHIP = NULL;
 	usb_gadget_probe_driver(&probe_driver);
 	if (!CHIP)
 		return -ENODEV;

drivers/usb/gadget/rndis.c

@@ -35,6 +35,7 @@
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
 
+#include "u_rndis.h"
 
 #undef	VERBOSE_DEBUG
 

drivers/usb/gadget/u_ether.c

@@ -48,8 +48,6 @@
 
 #define UETH__VERSION	"29-May-2008"
 
-#define GETHER_NAPI_WEIGHT	32
-
 struct eth_dev {
 	/* lock is held while accessing port_usb
 	 */
@@ -74,7 +72,6 @@ struct eth_dev {
 						struct sk_buff_head *list);
 
 	struct work_struct	work;
-	struct napi_struct	rx_napi;
 
 	unsigned long		todo;
 #define	WORK_RX_MEMORY		0
@@ -256,16 +253,18 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
 		DBG(dev, "rx submit --> %d\n", retval);
 		if (skb)
 			dev_kfree_skb_any(skb);
+		spin_lock_irqsave(&dev->req_lock, flags);
+		list_add(&req->list, &dev->rx_reqs);
+		spin_unlock_irqrestore(&dev->req_lock, flags);
 	}
 	return retval;
 }
 
 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 {
-	struct sk_buff	*skb = req->context;
+	struct sk_buff	*skb = req->context, *skb2;
 	struct eth_dev	*dev = ep->driver_data;
 	int		status = req->status;
-	bool		rx_queue = 0;
 
 	switch (status) {
 
@@ -289,8 +288,30 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 		} else {
 			skb_queue_tail(&dev->rx_frames, skb);
 		}
-		if (!status)
-			rx_queue = 1;
+		skb = NULL;
+
+		skb2 = skb_dequeue(&dev->rx_frames);
+		while (skb2) {
+			if (status < 0
+					|| ETH_HLEN > skb2->len
+					|| skb2->len > VLAN_ETH_FRAME_LEN) {
+				dev->net->stats.rx_errors++;
+				dev->net->stats.rx_length_errors++;
+				DBG(dev, "rx length %d\n", skb2->len);
+				dev_kfree_skb_any(skb2);
+				goto next_frame;
+			}
+			skb2->protocol = eth_type_trans(skb2, dev->net);
+			dev->net->stats.rx_packets++;
+			dev->net->stats.rx_bytes += skb2->len;
+
+			/* no buffer copies needed, unless hardware can't
+			 * use skb buffers.
+			 */
+			status = netif_rx(skb2);
+next_frame:
+			skb2 = skb_dequeue(&dev->rx_frames);
+		}
 		break;
 
 	/* software-driven interface shutdown */
@@ -313,20 +334,22 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req)
 		/* FALLTHROUGH */
 
 	default:
-		rx_queue = 1;
-		dev_kfree_skb_any(skb);
 		dev->net->stats.rx_errors++;
 		DBG(dev, "rx status %d\n", status);
 		break;
 	}
 
+	if (skb)
+		dev_kfree_skb_any(skb);
+	if (!netif_running(dev->net)) {
 clean:
 		spin_lock(&dev->req_lock);
 		list_add(&req->list, &dev->rx_reqs);
 		spin_unlock(&dev->req_lock);
-
-	if (rx_queue && likely(napi_schedule_prep(&dev->rx_napi)))
-		__napi_schedule(&dev->rx_napi);
+		req = NULL;
+	}
+	if (req)
+		rx_submit(dev, req, GFP_ATOMIC);
 }
 
 static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n)
@@ -391,24 +414,16 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
 {
 	struct usb_request	*req;
 	unsigned long		flags;
-	int			rx_counts = 0;
 
 	/* fill unused rxq slots with some skb */
 	spin_lock_irqsave(&dev->req_lock, flags);
 	while (!list_empty(&dev->rx_reqs)) {
-
-		if (++rx_counts > qlen(dev->gadget, dev->qmult))
-			break;
-
 		req = container_of(dev->rx_reqs.next,
 				struct usb_request, list);
 		list_del_init(&req->list);
 		spin_unlock_irqrestore(&dev->req_lock, flags);
 
 		if (rx_submit(dev, req, gfp_flags) < 0) {
-			spin_lock_irqsave(&dev->req_lock, flags);
-			list_add(&req->list, &dev->rx_reqs);
-			spin_unlock_irqrestore(&dev->req_lock, flags);
 			defer_kevent(dev, WORK_RX_MEMORY);
 			return;
 		}
@@ -418,41 +433,6 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags)
 	spin_unlock_irqrestore(&dev->req_lock, flags);
 }
 
-static int gether_poll(struct napi_struct *napi, int budget)
-{
-	struct eth_dev  *dev = container_of(napi, struct eth_dev, rx_napi);
-	struct sk_buff	*skb;
-	unsigned int	work_done = 0;
-	int		status = 0;
-
-	while ((skb = skb_dequeue(&dev->rx_frames))) {
-		if (status < 0
-				|| ETH_HLEN > skb->len
-				|| skb->len > VLAN_ETH_FRAME_LEN) {
-			dev->net->stats.rx_errors++;
-			dev->net->stats.rx_length_errors++;
-			DBG(dev, "rx length %d\n", skb->len);
-			dev_kfree_skb_any(skb);
-			continue;
-		}
-		skb->protocol = eth_type_trans(skb, dev->net);
-		dev->net->stats.rx_packets++;
-		dev->net->stats.rx_bytes += skb->len;
-
-		status = netif_rx_ni(skb);
-	}
-
-	if (netif_running(dev->net)) {
-		rx_fill(dev, GFP_KERNEL);
-		work_done++;
-	}
-
-	if (work_done < budget)
-		napi_complete(&dev->rx_napi);
-
-	return work_done;
-}
-
 static void eth_work(struct work_struct *work)
 {
 	struct eth_dev	*dev = container_of(work, struct eth_dev, work);
@@ -645,7 +625,6 @@ static void eth_start(struct eth_dev *dev, gfp_t gfp_flags)
 	/* and open the tx floodgates */
 	atomic_set(&dev->tx_qlen, 0);
 	netif_wake_queue(dev->net);
-	napi_enable(&dev->rx_napi);
 }
 
 static int eth_open(struct net_device *net)
@@ -672,7 +651,6 @@ static int eth_stop(struct net_device *net)
 	unsigned long	flags;
 
 	VDBG(dev, "%s\n", __func__);
-	napi_disable(&dev->rx_napi);
 	netif_stop_queue(net);
 
 	DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
@@ -790,7 +768,6 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 		return ERR_PTR(-ENOMEM);
 
 	dev = netdev_priv(net);
-	netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
 	spin_lock_init(&dev->lock);
 	spin_lock_init(&dev->req_lock);
 	INIT_WORK(&dev->work, eth_work);
@@ -853,7 +830,6 @@ struct net_device *gether_setup_name_default(const char *netname)
 		return ERR_PTR(-ENOMEM);
 
 	dev = netdev_priv(net);
-	netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT);
 	spin_lock_init(&dev->lock);
 	spin_lock_init(&dev->req_lock);
 	INIT_WORK(&dev->work, eth_work);
@@ -1137,7 +1113,6 @@ void gether_disconnect(struct gether *link)
 {
 	struct eth_dev		*dev = link->ioport;
 	struct usb_request	*req;
-	struct sk_buff		*skb;
 
 	WARN_ON(!dev);
 	if (!dev)
@@ -1164,12 +1139,6 @@ void gether_disconnect(struct gether *link)
 		spin_lock(&dev->req_lock);
 	}
 	spin_unlock(&dev->req_lock);
-
-	spin_lock(&dev->rx_frames.lock);
-	while ((skb = __skb_dequeue(&dev->rx_frames)))
-		dev_kfree_skb_any(skb);
-	spin_unlock(&dev->rx_frames.lock);
-
 	link->in_ep->driver_data = NULL;
 	link->in_ep->desc = NULL;
 

drivers/usb/gadget/zero.c

@@ -300,7 +300,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev)
 	ss_opts->isoc_interval = gzero_options.isoc_interval;
 	ss_opts->isoc_maxpacket = gzero_options.isoc_maxpacket;
 	ss_opts->isoc_mult = gzero_options.isoc_mult;
-	ss_opts->isoc_maxburst = gzero_options.isoc_maxpacket;
+	ss_opts->isoc_maxburst = gzero_options.isoc_maxburst;
 	ss_opts->bulk_buflen = gzero_options.bulk_buflen;
 
 	func_ss = usb_get_function(func_inst_ss);

drivers/usb/musb/musb_dsps.c

@@ -470,8 +470,9 @@ static int dsps_musb_exit(struct musb *musb)
 	struct dsps_glue *glue = dev_get_drvdata(dev->parent);
 
 	del_timer_sync(&glue->timer);
-
 	usb_phy_shutdown(musb->xceiv);
+	debugfs_remove_recursive(glue->dbgfs_root);
+
 	return 0;
 }
 
@@ -708,8 +709,6 @@ static int dsps_remove(struct platform_device *pdev)
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-	debugfs_remove_recursive(glue->dbgfs_root);
-
 	return 0;
 }
 

drivers/usb/musb/omap2430.c

@@ -316,7 +316,13 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
 {
 	struct omap2430_glue *glue = container_of(mailbox_work,
 				struct omap2430_glue, omap_musb_mailbox_work);
+	struct musb *musb = glue_to_musb(glue);
+	struct device *dev = musb->controller;
+
+	pm_runtime_get_sync(dev);
 	omap_musb_set_mailbox(glue);
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
 }
 
 static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci)
@@ -416,6 +422,7 @@ static int omap2430_musb_init(struct musb *musb)
 		omap_musb_set_mailbox(glue);
 
 	phy_init(musb->phy);
+	phy_power_on(musb->phy);
 
 	pm_runtime_put_noidle(musb->controller);
 	return 0;
@@ -478,6 +485,7 @@ static int omap2430_musb_exit(struct musb *musb)
 	del_timer_sync(&musb_idle_timer);
 
 	omap2430_low_level_exit(musb);
+	phy_power_off(musb->phy);
 	phy_exit(musb->phy);
 
 	return 0;

drivers/usb/phy/phy-am335x-control.c

@@ -3,6 +3,7 @@
 #include <linux/err.h>
 #include <linux/of.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 #include "am35x-phy-control.h"
 
 struct am335x_control_usb {
@@ -86,6 +87,14 @@ static void am335x_phy_power(struct phy_control *phy_ctrl, u32 id, bool on)
 	}
 
 	writel(val, usb_ctrl->phy_reg + reg);
+
+	/*
+	 * Give the PHY ~1ms to complete the power up operation.
+	 * Tests have shown unstable behaviour if other USB PHY related
+	 * registers are written too shortly after such a transition.
+	 */
+	if (on)
+		mdelay(1);
 }
 
 static const struct phy_control ctrl_am335x = {

drivers/usb/phy/phy.c

@@ -132,6 +132,9 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type)
 	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		pr_debug("PHY: unable to find transceiver of type %s\n",
 			usb_phy_type_string(type));
+		if (!IS_ERR(phy))
+			phy = ERR_PTR(-ENODEV);
+
 		goto err0;
 	}