Commit e999bbe7 authored by Tony Lindgren's avatar Tony Lindgren

ARM: OMAP: Remove unused platform devices, v3

This patch removes old platform devices. Alsa should now
be using the ASoC driver. For boards not yet using ASoC,
please see sound/soc/omap/osk5912.c.

Add dummy aic23_power_up and aic23_power_down functions for 770
to keep things compiling.

Remove references to omap_gpio_switch, and unused h2_nand_dev_ready
function.

This patch is based on an earlier patch by Arun KS.

Cc: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: default avatarArun KS <arunks@mistralsolutions.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>





parent 3127f8f8
...@@ -37,16 +37,14 @@ ...@@ -37,16 +37,14 @@
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <mach/gpio-switch.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/dma.h>
#include <mach/tc.h> #include <mach/tc.h>
#include <mach/nand.h> #include <mach/nand.h>
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/usb.h> #include <mach/usb.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
static int h2_keymap[] = { static int h2_keymap[] = {
KEY(0, 0, KEY_LEFT), KEY(0, 0, KEY_LEFT),
...@@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = { ...@@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = {
.id = -1, .id = -1,
}; };
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(15),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
/*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H2 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* tsc2101_configure, */
.codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2101_clock_setup, */
.codec_clock_on = NULL, /* tsc2101_clock_on, */
.codec_clock_off = NULL, /* tsc2101_clock_off, */
.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h2_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *h2_devices[] __initdata = { static struct platform_device *h2_devices[] __initdata = {
&h2_nor_device, &h2_nor_device,
&h2_nand_device, &h2_nand_device,
...@@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = { ...@@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = {
&h2_irda_device, &h2_irda_device,
&h2_kp_device, &h2_kp_device,
&h2_lcd_device, &h2_lcd_device,
&h2_mcbsp1_device,
}; };
static void __init h2_init_smc91x(void) static void __init h2_init_smc91x(void)
...@@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { ...@@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
#define H2_NAND_RB_GPIO_PIN 62 #define H2_NAND_RB_GPIO_PIN 62
static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
{
return gpio_get_value(H2_NAND_RB_GPIO_PIN);
}
static void __init h2_init(void) static void __init h2_init(void)
{ {
/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
......
...@@ -49,8 +49,6 @@ ...@@ -49,8 +49,6 @@
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/dma.h> #include <mach/dma.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
#define H3_TS_GPIO 48 #define H3_TS_GPIO 48
...@@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { ...@@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
}, },
}; };
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(15),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
.pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
/*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "H3 TSC2101",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* tsc2101_configure, */
.codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2101_clock_setup, */
.codec_clock_on = NULL, /* tsc2101_clock_on, */
.codec_clock_off = NULL, /* tsc2101_clock_off, */
.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
};
static struct platform_device h3_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&nor_device, &nor_device,
&nand_device, &nand_device,
...@@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = { ...@@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = {
&h3_irda_device, &h3_irda_device,
&h3_kp_device, &h3_kp_device,
&h3_lcd_device, &h3_lcd_device,
&h3_mcbsp1_device,
}; };
static struct omap_usb_config h3_usb_config __initdata = { static struct omap_usb_config h3_usb_config __initdata = {
...@@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { ...@@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
}, },
}; };
static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
{
.name = "mmc_slot",
.gpio = OMAP_MPUIO(1),
.type = OMAP_GPIO_SWITCH_TYPE_COVER,
.debounce_rising = 100,
.debounce_falling = 0,
.notify = h3_mmc_slot_cover_handler,
.notify_data = NULL,
},
};
#define H3_NAND_RB_GPIO_PIN 10 #define H3_NAND_RB_GPIO_PIN 10
static int nand_dev_ready(struct omap_nand_platform_data *data) static int nand_dev_ready(struct omap_nand_platform_data *data)
......
...@@ -37,8 +37,6 @@ ...@@ -37,8 +37,6 @@
#include <mach/usb.h> #include <mach/usb.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
#include <mach/mmc.h> #include <mach/mmc.h>
static int innovator_keymap[] = { static int innovator_keymap[] = {
...@@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = { ...@@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = {
.resource = &innovator_flash_resource, .resource = &innovator_flash_resource,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "OMAP Innovator AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device innovator_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct resource innovator_kp_resources[] = { static struct resource innovator_kp_resources[] = {
[0] = { [0] = {
.start = INT_KEYBOARD, .start = INT_KEYBOARD,
...@@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = { ...@@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = {
static struct platform_device *innovator1510_devices[] __initdata = { static struct platform_device *innovator1510_devices[] __initdata = {
&innovator_flash_device, &innovator_flash_device,
&innovator1510_smc91x_device, &innovator1510_smc91x_device,
&innovator_mcbsp1_device,
&innovator_kp_device, &innovator_kp_device,
&innovator1510_lcd_device, &innovator1510_lcd_device,
&innovator1510_spi_device, &innovator1510_spi_device,
......
...@@ -32,7 +32,6 @@ ...@@ -32,7 +32,6 @@
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/dsp_common.h> #include <mach/dsp_common.h>
#include <mach/aic23.h>
#include <mach/omapfb.h> #include <mach/omapfb.h>
#include <mach/lcd_mipid.h> #include <mach/lcd_mipid.h>
#include <mach/mmc.h> #include <mach/mmc.h>
...@@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock); ...@@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock);
*/ */
static int audio_pwr_state = -1; static int audio_pwr_state = -1;
static inline void aic23_power_up(void)
{
}
static inline void aic23_power_down(void)
{
}
/* /*
* audio_pwr_up / down should be called under audio_pwr_lock * audio_pwr_up / down should be called under audio_pwr_lock
*/ */
......
...@@ -51,8 +51,6 @@ ...@@ -51,8 +51,6 @@
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/tc.h> #include <mach/tc.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
static struct mtd_partition osk_partitions[] = { static struct mtd_partition osk_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */ /* bootloader (U-Boot, etc) in first sector */
...@@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = { ...@@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = {
.resource = osk5912_cf_resources, .resource = osk5912_cf_resources,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "OSK AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device osk5912_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct platform_device *osk5912_devices[] __initdata = { static struct platform_device *osk5912_devices[] __initdata = {
&osk5912_flash_device, &osk5912_flash_device,
&osk5912_smc91x_device, &osk5912_smc91x_device,
&osk5912_cf_device, &osk5912_cf_device,
&osk5912_mcbsp1_device,
}; };
static struct gpio_led tps_leds[] = { static struct gpio_led tps_leds[] = {
......
...@@ -42,8 +42,6 @@ ...@@ -42,8 +42,6 @@
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
static void __init omap_palmte_init_irq(void) static void __init omap_palmte_init_irq(void)
{ {
...@@ -203,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = { ...@@ -203,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = {
.enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
}; };
static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
.spcr2 = FRST | GRST | XRST | XINTM(3),
.xcr2 = XDATDLY(1) | XFIG,
.xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32),
.pcr0 = SCLKME | FSXP | CLKXP,
};
static struct omap_alsa_codec_config palmte_alsa_config = {
.name = "TSC2102 audio",
.mcbsp_regs_alsa = &palmte_mcbsp1_regs,
.codec_configure_dev = NULL, /* tsc2102_configure, */
.codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */
.codec_clock_setup = NULL, /* tsc2102_clock_setup, */
.codec_clock_on = NULL, /* tsc2102_clock_on, */
.codec_clock_off = NULL, /* tsc2102_clock_off, */
.get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
};
#ifdef CONFIG_APM #ifdef CONFIG_APM
/* /*
* Values measured in 10 minute intervals averaged over 10 samples. * Values measured in 10 minute intervals averaged over 10 samples.
......
...@@ -30,7 +30,6 @@ ...@@ -30,7 +30,6 @@
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
#include <mach/led.h> #include <mach/led.h>
#include <mach/mcbsp.h>
#include <mach/gpio.h> #include <mach/gpio.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/usb.h> #include <mach/usb.h>
...@@ -40,7 +39,6 @@ ...@@ -40,7 +39,6 @@
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/keypad.h> #include <mach/keypad.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/omap-alsa.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/ads7846.h> #include <linux/spi/ads7846.h>
...@@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = { ...@@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = {
.resource = &palmtt_flash_resource, .resource = &palmtt_flash_resource,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) |
RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) |
XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM |
FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "PalmTT AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure, */
.codec_set_samplerate = NULL, /* aic23_set_samplerate, */
.codec_clock_setup = NULL, /* aic23_clock_setup, */
.codec_clock_on = NULL, /* aic23_clock_on, */
.codec_clock_off = NULL, /* aic23_clock_off, */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
};
static struct platform_device palmtt_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct resource palmtt_kp_resources[] = { static struct resource palmtt_kp_resources[] = {
[0] = { [0] = {
.start = INT_KEYBOARD, .start = INT_KEYBOARD,
...@@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = { ...@@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = {
static struct platform_device *palmtt_devices[] __initdata = { static struct platform_device *palmtt_devices[] __initdata = {
&palmtt_flash_device, &palmtt_flash_device,
&palmtt_mcbsp1_device,
&palmtt_kp_device, &palmtt_kp_device,
&palmtt_lcd_device, &palmtt_lcd_device,
&palmtt_irda_device, &palmtt_irda_device,
......
...@@ -32,7 +32,6 @@ ...@@ -32,7 +32,6 @@
#include <asm/mach/map.h> #include <asm/mach/map.h>
#include <asm/mach/flash.h> #include <asm/mach/flash.h>
#include <mach/mcbsp.h>
#include <mach/gpio.h> #include <mach/gpio.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/usb.h> #include <mach/usb.h>
...@@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = { ...@@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = {
.id = -1, .id = -1,
}; };
#define DEFAULT_BITPERSAMPLE 16
static struct omap_mcbsp_reg_cfg mcbsp_regs = {
.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
.spcr1 = RINTM(3) | RRST,
.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
.pcr0 = CLKXP | CLKRP, /* mcbsp: slave */
};
static struct omap_alsa_codec_config alsa_config = {
.name = "PalmZ71 AIC23",
.mcbsp_regs_alsa = &mcbsp_regs,
.codec_configure_dev = NULL, /* aic23_configure */
.codec_set_samplerate = NULL, /* aic23_set_samplerate */
.codec_clock_setup = NULL, /* aic23_clock_setup */
.codec_clock_on = NULL, /* aic23_clock_on */
.codec_clock_off = NULL, /* aic23_clock_off */
.get_default_samplerate = NULL, /* aic23_get_default_samplerate */
};
static struct platform_device palmz71_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &alsa_config,
},
};
static struct omap_backlight_config palmz71_backlight_config = { static struct omap_backlight_config palmz71_backlight_config = {
.default_intensity = 0xa0, .default_intensity = 0xa0,
}; };
...@@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = { ...@@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = {
static struct platform_device *devices[] __initdata = { static struct platform_device *devices[] __initdata = {
&palmz71_rom_device, &palmz71_rom_device,
&palmz71_kp_device, &palmz71_kp_device,
&palmz71_mcbsp1_device,
&palmz71_lcd_device, &palmz71_lcd_device,
&palmz71_irda_device, &palmz71_irda_device,
&palmz71_spi_device, &palmz71_spi_device,
......
...@@ -34,13 +34,12 @@ ...@@ -34,13 +34,12 @@
#include <mach/gpio.h> #include <mach/gpio.h>
#include <mach/mux.h> #include <mach/mux.h>
#include <mach/dma.h>
#include <mach/irda.h> #include <mach/irda.h>
#include <mach/usb.h> #include <mach/usb.h>
#include <mach/tc.h> #include <mach/tc.h>
#include <mach/board.h> #include <mach/board.h>
#include <mach/common.h> #include <mach/common.h>
#include <mach/mcbsp.h>
#include <mach/omap-alsa.h>
#include <mach/keypad.h> #include <mach/keypad.h>
/* Write to I2C device */ /* Write to I2C device */
...@@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = { ...@@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = {
.resource = sx1_irda_resources, .resource = sx1_irda_resources,
}; };
/*----------- McBSP & Sound -------------------------*/
/* Playback interface - McBSP1 */
static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
.spcr2 = XINTM(3), /* SPCR2=30 */
.spcr1 = RINTM(3), /* SPCR1=30 */
.rcr2 = 0, /* RCR2 =00 */
.rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */
.xcr2 = 0, /* XCR2 = 0 */
.xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */
.srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */
.srgr2 = FSGM | FPER(31), /* SRGR2=101f */
.pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
/* PCR0 =0f0f */
};
static struct omap_alsa_codec_config sx1_alsa_config = {
.name = "SX1 EGold",
.mcbsp_regs_alsa = &mcbsp1_regs,
};
static struct platform_device sx1_mcbsp1_device = {
.name = "omap_alsa_mcbsp",
.id = 1,
.dev = {
.platform_data = &sx1_alsa_config,
},
};
/*----------- MTD -------------------------*/ /*----------- MTD -------------------------*/
static struct mtd_partition sx1_partitions[] = { static struct mtd_partition sx1_partitions[] = {
...@@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = { ...@@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = {
&sx1_flash_device, &sx1_flash_device,
&sx1_kp_device, &sx1_kp_device,
&sx1_lcd_device, &sx1_lcd_device,
&sx1_mcbsp1_device,
&sx1_irda_device, &sx1_irda_device,
}; };
/*-----------------------------------------*/ /*-----------------------------------------*/
......
/*
* arch/arm/plat-omap/include/mach/aic23.h
*
* Hardware definitions for TI TLV320AIC23 audio codec
*
* Copyright (C) 2002 RidgeRun, Inc.
* Author: Steve Johnson
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_AIC23_H
#define __ASM_ARCH_AIC23_H
// Codec TLV320AIC23
#define LEFT_LINE_VOLUME_ADDR 0x00
#define RIGHT_LINE_VOLUME_ADDR 0x01
#define LEFT_CHANNEL_VOLUME_ADDR 0x02
#define RIGHT_CHANNEL_VOLUME_ADDR 0x03
#define ANALOG_AUDIO_CONTROL_ADDR 0x04
#define DIGITAL_AUDIO_CONTROL_ADDR 0x05
#define POWER_DOWN_CONTROL_ADDR 0x06
#define DIGITAL_AUDIO_FORMAT_ADDR 0x07
#define SAMPLE_RATE_CONTROL_ADDR 0x08
#define DIGITAL_INTERFACE_ACT_ADDR 0x09
#define RESET_CONTROL_ADDR 0x0F
// Left (right) line input volume control register
#define LRS_ENABLED 0x0100
#define LIM_MUTED 0x0080
#define LIV_DEFAULT 0x0017
#define LIV_MAX 0x001f
#define LIV_MIN 0x0000
// Left (right) channel headphone volume control register
#define LZC_ON 0x0080
#define LHV_DEFAULT 0x0079
#define LHV_MAX 0x007f
#define LHV_MIN 0x0000
// Analog audio path control register
#define STA_REG(x) ((x)<<6)
#define STE_ENABLED 0x0020
#define DAC_SELECTED 0x0010
#define BYPASS_ON 0x0008
#define INSEL_MIC 0x0004
#define MICM_MUTED 0x0002
#define MICB_20DB 0x0001
// Digital audio path control register
#define DACM_MUTE 0x0008
#define DEEMP_32K 0x0002
#define DEEMP_44K 0x0004
#define DEEMP_48K 0x0006
#define ADCHP_ON 0x0001
// Power control down register
#define DEVICE_POWER_OFF 0x0080
#define CLK_OFF 0x0040
#define OSC_OFF 0x0020
#define OUT_OFF 0x0010
#define DAC_OFF 0x0008
#define ADC_OFF 0x0004
#define MIC_OFF 0x0002
#define LINE_OFF 0x0001
// Digital audio interface register
#define MS_MASTER 0x0040
#define LRSWAP_ON 0x0020
#define LRP_ON 0x0010
#define IWL_16 0x0000
#define IWL_20 0x0004
#define IWL_24 0x0008
#define IWL_32 0x000C
#define FOR_I2S 0x0002
#define FOR_DSP 0x0003
// Sample rate control register
#define CLKOUT_HALF 0x0080
#define CLKIN_HALF 0x0040
#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode
#define USB_CLK_ON 0x0001
#define SR_MASK 0xf
#define CLKOUT_SHIFT 7
#define CLKIN_SHIFT 6
#define SR_SHIFT 2
#define BOSR_SHIFT 1
// Digital interface register
#define ACT_ON 0x0001
#define TLV320AIC23ID1 (0x1a) // cs low
#define TLV320AIC23ID2 (0x1b) // cs high
void aic23_power_up(void);
void aic23_power_down(void);
#endif /* __ASM_ARCH_AIC23_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment