Commit e9a5a919 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 cleanups from Ingo Molnar:
 "Small cleanups."

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix the error of using "const" in gen-insn-attr-x86.awk
  x86, apic: Cleanup cfg->domain setup for legacy interrupts
  x86: Remove dead hlt_use_halt code
parents 74b84233 28a79389
......@@ -234,11 +234,11 @@ int __init arch_early_irq_init(void)
zalloc_cpumask_var_node(&cfg[i].old_domain, GFP_KERNEL, node);
/*
* For legacy IRQ's, start with assigning irq0 to irq15 to
* IRQ0_VECTOR to IRQ15_VECTOR on cpu 0.
* IRQ0_VECTOR to IRQ15_VECTOR for all cpu's.
*/
if (i < legacy_pic->nr_legacy_irqs) {
cfg[i].vector = IRQ0_VECTOR + i;
cpumask_set_cpu(0, cfg[i].domain);
cpumask_setall(cfg[i].domain);
}
}
......@@ -1141,7 +1141,8 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
* allocation for the members that are not used anymore.
*/
cpumask_andnot(cfg->old_domain, cfg->domain, tmp_mask);
cfg->move_in_progress = 1;
cfg->move_in_progress =
cpumask_intersects(cfg->old_domain, cpu_online_mask);
cpumask_and(cfg->domain, cfg->domain, tmp_mask);
break;
}
......@@ -1172,8 +1173,9 @@ __assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask)
current_vector = vector;
current_offset = offset;
if (cfg->vector) {
cfg->move_in_progress = 1;
cpumask_copy(cfg->old_domain, cfg->domain);
cfg->move_in_progress =
cpumask_intersects(cfg->old_domain, cpu_online_mask);
}
for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
per_cpu(vector_irq, new_cpu)[vector] = irq;
......@@ -1241,12 +1243,6 @@ void __setup_vector_irq(int cpu)
cfg = irq_get_chip_data(irq);
if (!cfg)
continue;
/*
* If it is a legacy IRQ handled by the legacy PIC, this cpu
* will be part of the irq_cfg's domain.
*/
if (irq < legacy_pic->nr_legacy_irqs && !IO_APIC_IRQ(irq))
cpumask_set_cpu(cpu, cfg->domain);
if (!cpumask_test_cpu(cpu, cfg->domain))
continue;
......@@ -1356,16 +1352,6 @@ static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg,
if (!IO_APIC_IRQ(irq))
return;
/*
* For legacy irqs, cfg->domain starts with cpu 0. Now that IO-APIC
* can handle this irq and the apic driver is finialized at this point,
* update the cfg->domain.
*/
if (irq < legacy_pic->nr_legacy_irqs &&
cpumask_equal(cfg->domain, cpumask_of(0)))
apic->vector_allocation_domain(0, cfg->domain,
apic->target_cpus());
if (assign_irq_vector(irq, cfg, apic->target_cpus()))
return;
......
......@@ -306,11 +306,6 @@ void (*pm_idle)(void);
EXPORT_SYMBOL(pm_idle);
#endif
static inline int hlt_use_halt(void)
{
return 1;
}
#ifndef CONFIG_SMP
static inline void play_dead(void)
{
......@@ -410,28 +405,22 @@ void cpu_idle(void)
*/
void default_idle(void)
{
if (hlt_use_halt()) {
trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle_rcuidle(1, smp_processor_id());
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we
* test NEED_RESCHED:
*/
smp_mb();
trace_power_start_rcuidle(POWER_CSTATE, 1, smp_processor_id());
trace_cpu_idle_rcuidle(1, smp_processor_id());
current_thread_info()->status &= ~TS_POLLING;
/*
* TS_POLLING-cleared state must be visible before we
* test NEED_RESCHED:
*/
smp_mb();
if (!need_resched())
safe_halt(); /* enables interrupts racelessly */
else
local_irq_enable();
current_thread_info()->status |= TS_POLLING;
trace_power_end_rcuidle(smp_processor_id());
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
} else {
if (!need_resched())
safe_halt(); /* enables interrupts racelessly */
else
local_irq_enable();
/* loop is done by the caller */
cpu_relax();
}
current_thread_info()->status |= TS_POLLING;
trace_power_end_rcuidle(smp_processor_id());
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
}
#ifdef CONFIG_APM_MODULE
EXPORT_SYMBOL(default_idle);
......
......@@ -356,7 +356,7 @@ END {
exit 1
# print escape opcode map's array
print "/* Escape opcode map array */"
print "const insn_attr_t const *inat_escape_tables[INAT_ESC_MAX + 1]" \
print "const insn_attr_t * const inat_escape_tables[INAT_ESC_MAX + 1]" \
"[INAT_LSTPFX_MAX + 1] = {"
for (i = 0; i < geid; i++)
for (j = 0; j < max_lprefix; j++)
......@@ -365,7 +365,7 @@ END {
print "};\n"
# print group opcode map's array
print "/* Group opcode map array */"
print "const insn_attr_t const *inat_group_tables[INAT_GRP_MAX + 1]"\
print "const insn_attr_t * const inat_group_tables[INAT_GRP_MAX + 1]"\
"[INAT_LSTPFX_MAX + 1] = {"
for (i = 0; i < ggid; i++)
for (j = 0; j < max_lprefix; j++)
......@@ -374,7 +374,7 @@ END {
print "};\n"
# print AVX opcode map's array
print "/* AVX opcode map array */"
print "const insn_attr_t const *inat_avx_tables[X86_VEX_M_MAX + 1]"\
print "const insn_attr_t * const inat_avx_tables[X86_VEX_M_MAX + 1]"\
"[INAT_LSTPFX_MAX + 1] = {"
for (i = 0; i < gaid; i++)
for (j = 0; j < max_lprefix; j++)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment