Commit e9ab3207 authored by Paul Mundt's avatar Paul Mundt

Merge branch 'for-paul-38-rebased' of git://gitorious.org/linux-omap-dss2/linux

parents e54be894 18faa1b6
...@@ -187,16 +187,19 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ ...@@ -187,16 +187,19 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
hsmmc.o hsmmc.o
obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \ obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \
board-zoom-peripherals.o \ board-zoom-peripherals.o \
board-zoom-display.o \
board-flash.o \ board-flash.o \
hsmmc.o \ hsmmc.o \
board-zoom-debugboard.o board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \ obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \
board-zoom-peripherals.o \ board-zoom-peripherals.o \
board-zoom-display.o \
board-flash.o \ board-flash.o \
hsmmc.o \ hsmmc.o \
board-zoom-debugboard.o board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \ board-zoom-peripherals.o \
board-zoom-display.o \
board-flash.o \ board-flash.o \
hsmmc.o hsmmc.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
......
...@@ -38,6 +38,7 @@ ...@@ -38,6 +38,7 @@
#include <plat/dma.h> #include <plat/dma.h>
#include <plat/gpmc.h> #include <plat/gpmc.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/gpmc-smc91x.h> #include <plat/gpmc-smc91x.h>
...@@ -270,13 +271,18 @@ static struct omap_dss_device sdp3430_lcd_device = { ...@@ -270,13 +271,18 @@ static struct omap_dss_device sdp3430_lcd_device = {
.platform_disable = sdp3430_panel_disable_lcd, .platform_disable = sdp3430_panel_disable_lcd,
}; };
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
};
static struct omap_dss_device sdp3430_dvi_device = { static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
}; };
static struct omap_dss_device sdp3430_tv_device = { static struct omap_dss_device sdp3430_tv_device = {
......
...@@ -207,6 +207,7 @@ static void __init omap_sdp_init(void) ...@@ -207,6 +207,7 @@ static void __init omap_sdp_init(void)
{ {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init(); zoom_peripherals_init();
zoom_display_init();
board_smc91x_init(); board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp); board_flash_init(sdp_flash_partitions, chip_sel_sdp);
enable_board_wakeup_source(); enable_board_wakeup_source();
......
...@@ -35,6 +35,7 @@ ...@@ -35,6 +35,7 @@
#include <plat/common.h> #include <plat/common.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include "mux.h" #include "mux.h"
#include "control.h" #include "control.h"
...@@ -303,13 +304,18 @@ static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev) ...@@ -303,13 +304,18 @@ static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0; lcd_enabled = 0;
} }
static struct panel_generic_dpi_data lcd_panel = {
.name = "sharp_lq",
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
};
static struct omap_dss_device am3517_evm_lcd_device = { static struct omap_dss_device am3517_evm_lcd_device = {
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd", .name = "lcd",
.driver_name = "sharp_lq_panel", .driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 16, .phy.dpi.data_lines = 16,
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
}; };
static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev) static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
...@@ -346,13 +352,18 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev) ...@@ -346,13 +352,18 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0; dvi_enabled = 0;
} }
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
static struct omap_dss_device am3517_evm_dvi_device = { static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel", .driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
}; };
static struct omap_dss_device *am3517_evm_dss_devices[] = { static struct omap_dss_device *am3517_evm_dss_devices[] = {
......
...@@ -46,6 +46,7 @@ ...@@ -46,6 +46,7 @@
#include <plat/gpmc.h> #include <plat/gpmc.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h> #include <plat/mcspi.h>
#include <mach/hardware.h> #include <mach/hardware.h>
...@@ -351,22 +352,32 @@ static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev) ...@@ -351,22 +352,32 @@ static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
{ {
} }
static struct panel_generic_dpi_data lcd_panel = {
.name = "toppoly_tdo35s",
.platform_enable = cm_t35_panel_enable_lcd,
.platform_disable = cm_t35_panel_disable_lcd,
};
static struct omap_dss_device cm_t35_lcd_device = { static struct omap_dss_device cm_t35_lcd_device = {
.name = "lcd", .name = "lcd",
.driver_name = "toppoly_tdo35s_panel",
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 18, .phy.dpi.data_lines = 18,
.platform_enable = cm_t35_panel_enable_lcd, };
.platform_disable = cm_t35_panel_disable_lcd,
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
}; };
static struct omap_dss_device cm_t35_dvi_device = { static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
}; };
static struct omap_dss_device cm_t35_tv_device = { static struct omap_dss_device cm_t35_tv_device = {
......
...@@ -46,6 +46,7 @@ ...@@ -46,6 +46,7 @@
#include <plat/nand.h> #include <plat/nand.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h> #include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h> #include <linux/input/matrix_keypad.h>
...@@ -149,23 +150,32 @@ static struct regulator_consumer_supply devkit8000_vmmc1_supply = ...@@ -149,23 +150,32 @@ static struct regulator_consumer_supply devkit8000_vmmc1_supply =
static struct regulator_consumer_supply devkit8000_vio_supply = static struct regulator_consumer_supply devkit8000_vio_supply =
REGULATOR_SUPPLY("vcc", "spi2.0"); REGULATOR_SUPPLY("vcc", "spi2.0");
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
static struct omap_dss_device devkit8000_lcd_device = { static struct omap_dss_device devkit8000_lcd_device = {
.name = "lcd", .name = "lcd",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL, /* will be replaced */
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
}; };
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
static struct omap_dss_device devkit8000_dvi_device = { static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL, /* will be replaced */
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
}; };
static struct omap_dss_device devkit8000_tv_device = { static struct omap_dss_device devkit8000_tv_device = {
......
...@@ -31,6 +31,7 @@ ...@@ -31,6 +31,7 @@
#include <plat/gpmc.h> #include <plat/gpmc.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/onenand.h> #include <plat/onenand.h>
#include "mux.h" #include "mux.h"
...@@ -459,13 +460,18 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev) ...@@ -459,13 +460,18 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
} }
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
};
static struct omap_dss_device igep2_dvi_device = { static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel", .driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
}; };
static struct omap_dss_device *igep2_dss_devices[] = { static struct omap_dss_device *igep2_dss_devices[] = {
......
...@@ -41,6 +41,7 @@ ...@@ -41,6 +41,7 @@
#include <plat/board.h> #include <plat/board.h>
#include <plat/common.h> #include <plat/common.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/gpmc.h> #include <plat/gpmc.h>
#include <plat/nand.h> #include <plat/nand.h>
#include <plat/usb.h> #include <plat/usb.h>
...@@ -194,14 +195,19 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev) ...@@ -194,14 +195,19 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value(dssdev->reset_gpio, 0); gpio_set_value(dssdev->reset_gpio, 0);
} }
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
};
static struct omap_dss_device beagle_dvi_device = { static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel", .driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.reset_gpio = 170, .reset_gpio = 170,
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
}; };
static struct omap_dss_device beagle_tv_device = { static struct omap_dss_device beagle_tv_device = {
......
...@@ -43,6 +43,7 @@ ...@@ -43,6 +43,7 @@
#include <plat/common.h> #include <plat/common.h>
#include <plat/mcspi.h> #include <plat/mcspi.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include "mux.h" #include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h" #include "sdram-micron-mt46h32m32lf-6.h"
...@@ -301,13 +302,18 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) ...@@ -301,13 +302,18 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0; dvi_enabled = 0;
} }
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
static struct omap_dss_device omap3_evm_dvi_device = { static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
}; };
static struct omap_dss_device *omap3_evm_dss_devices[] = { static struct omap_dss_device *omap3_evm_dss_devices[] = {
......
...@@ -40,6 +40,7 @@ ...@@ -40,6 +40,7 @@
#include <plat/nand.h> #include <plat/nand.h>
#include <plat/usb.h> #include <plat/usb.h>
#include <plat/display.h> #include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h> #include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h> #include <linux/input/matrix_keypad.h>
...@@ -160,13 +161,18 @@ static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev) ...@@ -160,13 +161,18 @@ static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0; lcd_enabled = 0;
} }
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
.platform_enable = omap3_stalker_enable_lcd,
.platform_disable = omap3_stalker_disable_lcd,
};
static struct omap_dss_device omap3_stalker_lcd_device = { static struct omap_dss_device omap3_stalker_lcd_device = {
.name = "lcd", .name = "lcd",
.driver_name = "generic_panel", .driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.platform_enable = omap3_stalker_enable_lcd,
.platform_disable = omap3_stalker_disable_lcd,
}; };
static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
...@@ -208,13 +214,18 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) ...@@ -208,13 +214,18 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0; dvi_enabled = 0;
} }
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
};
static struct omap_dss_device omap3_stalker_dvi_device = { static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi", .name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI, .type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24, .phy.dpi.data_lines = 24,
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
}; };
static struct omap_dss_device *omap3_stalker_dss_devices[] = { static struct omap_dss_device *omap3_stalker_dss_devices[] = {
......
/*
* Copyright (C) 2010 Texas Instruments Inc.
*
* Modified from mach-omap2/board-zoom-peripherals.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/spi/spi.h>
#include <plat/mcspi.h>
#include <plat/display.h>
#define LCD_PANEL_RESET_GPIO_PROD 96
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
static void zoom_lcd_panel_init(void)
{
int ret;
unsigned char lcd_panel_reset_gpio;
lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
LCD_PANEL_RESET_GPIO_PROD :
LCD_PANEL_RESET_GPIO_PILOT;
ret = gpio_request(lcd_panel_reset_gpio, "lcd reset");
if (ret) {
pr_err("Failed to get LCD reset GPIO (gpio%d).\n",
lcd_panel_reset_gpio);
return;
}
gpio_direction_output(lcd_panel_reset_gpio, 1);
ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga");
if (ret) {
pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n",
LCD_PANEL_QVGA_GPIO);
goto err0;
}
gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1);
return;
err0:
gpio_free(lcd_panel_reset_gpio);
}
static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
{
return 0;
}
static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
{
}
/*
* PWMA/B register offsets (TWL4030_MODULE_PWMA)
*/
#define TWL_INTBR_PMBR1 0xD
#define TWL_INTBR_GPBR1 0xC
#define TWL_LED_PWMON 0x0
#define TWL_LED_PWMOFF 0x1
static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
{
unsigned char c;
u8 mux_pwm, enb_pwm;
if (level > 100)
return -1;
twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1);
twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1);
if (level == 0) {
/* disable pwm1 output and clock */
enb_pwm = enb_pwm & 0xF5;
/* change pwm1 pin to gpio pin */
mux_pwm = mux_pwm & 0xCF;
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
enb_pwm, TWL_INTBR_GPBR1);
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
mux_pwm, TWL_INTBR_PMBR1);
return 0;
}
if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) {
/* change gpio pin to pwm1 pin */
mux_pwm = mux_pwm | 0x30;
/* enable pwm1 output and clock*/
enb_pwm = enb_pwm | 0x0A;
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
mux_pwm, TWL_INTBR_PMBR1);
twl_i2c_write_u8(TWL4030_MODULE_INTBR,
enb_pwm, TWL_INTBR_GPBR1);
}
c = ((50 * (100 - level)) / 100) + 1;
twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF);
twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON);
return 0;
}
static struct omap_dss_device zoom_lcd_device = {
.name = "lcd",
.driver_name = "NEC_8048_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.platform_enable = zoom_panel_enable_lcd,
.platform_disable = zoom_panel_disable_lcd,
.max_backlight_level = 100,
.set_backlight = zoom_set_bl_intensity,
};
static struct omap_dss_device *zoom_dss_devices[] = {
&zoom_lcd_device,
};
static struct omap_dss_board_info zoom_dss_data = {
.num_devices = ARRAY_SIZE(zoom_dss_devices),
.devices = zoom_dss_devices,
.default_device = &zoom_lcd_device,
};
static struct platform_device zoom_dss_device = {
.name = "omapdss",
.id = -1,
.dev = {
.platform_data = &zoom_dss_data,
},
};
static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
.turbo_mode = 1,
.single_channel = 1, /* 0: slave, 1: master */
};
static struct spi_board_info nec_8048_spi_board_info[] __initdata = {
[0] = {
.modalias = "nec_8048_spi",
.bus_num = 1,
.chip_select = 2,
.max_speed_hz = 375000,
.controller_data = &dss_lcd_mcspi_config,
},
};
static struct platform_device *zoom_display_devices[] __initdata = {
&zoom_dss_device,
};
void __init zoom_display_init(void)
{
platform_add_devices(zoom_display_devices,
ARRAY_SIZE(zoom_display_devices));
spi_register_board_info(nec_8048_spi_board_info,
ARRAY_SIZE(nec_8048_spi_board_info));
zoom_lcd_panel_init();
}
...@@ -35,6 +35,8 @@ ...@@ -35,6 +35,8 @@
#define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_PMENA_GPIO (101)
#define OMAP_ZOOM_WLAN_IRQ_GPIO (162) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162)
#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
/* Zoom2 has Qwerty keyboard*/ /* Zoom2 has Qwerty keyboard*/
static uint32_t board_keymap[] = { static uint32_t board_keymap[] = {
KEY(0, 0, KEY_E), KEY(0, 0, KEY_E),
...@@ -224,9 +226,43 @@ static struct omap2_hsmmc_info mmc[] = { ...@@ -224,9 +226,43 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */ {} /* Terminator */
}; };
static struct regulator_consumer_supply zoom_vpll2_supply =
REGULATOR_SUPPLY("vdds_dsi", "omapdss");
static struct regulator_consumer_supply zoom_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss");
static struct regulator_init_data zoom_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vpll2_supply,
};
static struct regulator_init_data zoom_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vdda_dac_supply,
};
static int zoom_twl_gpio_setup(struct device *dev, static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio) unsigned gpio, unsigned ngpio)
{ {
int ret;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0; mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc); omap2_hsmmc_init(mmc);
...@@ -238,7 +274,15 @@ static int zoom_twl_gpio_setup(struct device *dev, ...@@ -238,7 +274,15 @@ static int zoom_twl_gpio_setup(struct device *dev,
zoom_vsim_supply.dev = mmc[0].dev; zoom_vsim_supply.dev = mmc[0].dev;
zoom_vmmc2_supply.dev = mmc[1].dev; zoom_vmmc2_supply.dev = mmc[1].dev;
return 0; ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable");
if (ret) {
pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n",
LCD_PANEL_ENABLE_GPIO);
return ret;
}
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
return ret;
} }
/* EXTMUTE callback function */ /* EXTMUTE callback function */
...@@ -301,7 +345,8 @@ static struct twl4030_platform_data zoom_twldata = { ...@@ -301,7 +345,8 @@ static struct twl4030_platform_data zoom_twldata = {
.vmmc1 = &zoom_vmmc1, .vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2, .vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim, .vsim = &zoom_vsim,
.vpll2 = &zoom_vpll2,
.vdac = &zoom_vdac,
}; };
static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
......
...@@ -130,6 +130,7 @@ static void __init omap_zoom_init(void) ...@@ -130,6 +130,7 @@ static void __init omap_zoom_init(void)
ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
zoom_debugboard_init(); zoom_debugboard_init();
zoom_peripherals_init(); zoom_peripherals_init();
zoom_display_init();
} }
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
......
/* /*
* Defines for zoom boards * Defines for zoom boards
*/ */
#include <plat/display.h>
#define ZOOM_NAND_CS 0 #define ZOOM_NAND_CS 0
extern int __init zoom_debugboard_init(void); extern int __init zoom_debugboard_init(void);
extern void __init zoom_peripherals_init(void); extern void __init zoom_peripherals_init(void);
extern void __init zoom_display_init(void);
#define ZOOM2_HEADSET_EXTMUTE_GPIO 153 #define ZOOM2_HEADSET_EXTMUTE_GPIO 153
...@@ -42,6 +42,10 @@ ...@@ -42,6 +42,10 @@
#define DISPC_IRQ_SYNC_LOST (1 << 14) #define DISPC_IRQ_SYNC_LOST (1 << 14)
#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) #define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15)
#define DISPC_IRQ_WAKEUP (1 << 16) #define DISPC_IRQ_WAKEUP (1 << 16)
#define DISPC_IRQ_SYNC_LOST2 (1 << 17)
#define DISPC_IRQ_VSYNC2 (1 << 18)
#define DISPC_IRQ_ACBIAS_COUNT_STAT2 (1 << 21)
#define DISPC_IRQ_FRAMEDONE2 (1 << 22)
struct omap_dss_device; struct omap_dss_device;
struct omap_overlay_manager; struct omap_overlay_manager;
...@@ -64,6 +68,7 @@ enum omap_plane { ...@@ -64,6 +68,7 @@ enum omap_plane {
enum omap_channel { enum omap_channel {
OMAP_DSS_CHANNEL_LCD = 0, OMAP_DSS_CHANNEL_LCD = 0,
OMAP_DSS_CHANNEL_DIGIT = 1, OMAP_DSS_CHANNEL_DIGIT = 1,
OMAP_DSS_CHANNEL_LCD2 = 2,
}; };
enum omap_color_mode { enum omap_color_mode {
...@@ -142,6 +147,7 @@ enum omap_dss_display_state { ...@@ -142,6 +147,7 @@ enum omap_dss_display_state {
enum omap_dss_overlay_managers { enum omap_dss_overlay_managers {
OMAP_DSS_OVL_MGR_LCD, OMAP_DSS_OVL_MGR_LCD,
OMAP_DSS_OVL_MGR_TV, OMAP_DSS_OVL_MGR_TV,
OMAP_DSS_OVL_MGR_LCD2,
}; };
enum omap_dss_rotation_type { enum omap_dss_rotation_type {
...@@ -268,6 +274,7 @@ struct omap_overlay_info { ...@@ -268,6 +274,7 @@ struct omap_overlay_info {
u16 out_width; /* if 0, out_width == width */ u16 out_width; /* if 0, out_width == width */
u16 out_height; /* if 0, out_height == height */ u16 out_height; /* if 0, out_height == height */
u8 global_alpha; u8 global_alpha;
u8 pre_mult_alpha;
}; };
struct omap_overlay { struct omap_overlay {
...@@ -351,6 +358,8 @@ struct omap_dss_device { ...@@ -351,6 +358,8 @@ struct omap_dss_device {
enum omap_display_type type; enum omap_display_type type;
enum omap_channel channel;
union { union {
struct { struct {
u8 data_lines; u8 data_lines;
......
/*
* Header for generic DPI panel driver
*
* Copyright (C) 2010 Canonical Ltd.
* Author: Bryan Wu <bryan.wu@canonical.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H
#define __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H
#include "display.h"
/**
* struct panel_generic_dpi_data - panel driver configuration data
* @name: panel name
* @platform_enable: platform specific panel enable function
* @platform_disable: platform specific panel disable function
*/
struct panel_generic_dpi_data {
const char *name;
int (*platform_enable)(struct omap_dss_device *dssdev);
void (*platform_disable)(struct omap_dss_device *dssdev);
};
#endif /* __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H */
menu "OMAP2/3 Display Device Drivers" menu "OMAP2/3 Display Device Drivers"
depends on OMAP2_DSS depends on OMAP2_DSS
config PANEL_GENERIC config PANEL_GENERIC_DPI
tristate "Generic Panel" tristate "Generic DPI Panel"
help help
Generic panel driver. Generic DPI panel driver.
Used for DVI output for Beagle and OMAP3 SDP. Supports DVI output for Beagle and OMAP3 SDP.
Supports LCD Panel used in TI SDP3430 and EVM boards,
OMAP3517 EVM boards and CM-T35.
config PANEL_SHARP_LS037V7DW01 config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel" tristate "Sharp LS037V7DW01 LCD Panel"
...@@ -14,11 +16,12 @@ config PANEL_SHARP_LS037V7DW01 ...@@ -14,11 +16,12 @@ config PANEL_SHARP_LS037V7DW01
help help
LCD Panel used in TI's SDP3430 and EVM boards LCD Panel used in TI's SDP3430 and EVM boards
config PANEL_SHARP_LQ043T1DG01 config PANEL_NEC_NL8048HL11_01B
tristate "Sharp LQ043T1DG01 LCD Panel" tristate "NEC NL8048HL11-01B Panel"
depends on OMAP2_DSS depends on OMAP2_DSS
help help
LCD Panel used in TI's OMAP3517 EVM boards This NEC NL8048HL11-01B panel is TFT LCD
used in the Zoom2/3/3630 sdp boards.
config PANEL_TAAL config PANEL_TAAL
tristate "Taal DSI Panel" tristate "Taal DSI Panel"
...@@ -26,12 +29,6 @@ config PANEL_TAAL ...@@ -26,12 +29,6 @@ config PANEL_TAAL
help help
Taal DSI command mode panel from TPO. Taal DSI command mode panel from TPO.
config PANEL_TOPPOLY_TDO35S
tristate "Toppoly TDO35S LCD Panel support"
depends on OMAP2_DSS
help
LCD Panel used in CM-T35
config PANEL_TPO_TD043MTEA1 config PANEL_TPO_TD043MTEA1
tristate "TPO TD043MTEA1 LCD Panel" tristate "TPO TD043MTEA1 LCD Panel"
depends on OMAP2_DSS && SPI depends on OMAP2_DSS && SPI
......
obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
/*
* Generic DPI Panels support
*
* Copyright (C) 2010 Canonical Ltd.
* Author: Bryan Wu <bryan.wu@canonical.com>
*
* LCD panel driver for Sharp LQ043T1DG01
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Vaibhav Hiremath <hvaibhav@ti.com>
*
* LCD panel driver for Toppoly TDO35S
*
* Copyright (C) 2009 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <plat/panel-generic-dpi.h>
struct panel_config {
struct omap_video_timings timings;
int acbi; /* ac-bias pin transitions per interrupt */
/* Unit: line clocks */
int acb; /* ac-bias pin frequency */
enum omap_panel_config config;
int power_on_delay;
int power_off_delay;
/*
* Used to match device to panel configuration
* when use generic panel driver
*/
const char *name;
};
/* Panel configurations */
static struct panel_config generic_dpi_panels[] = {
/* Generic Panel */
{
{
.x_res = 640,
.y_res = 480,
.pixel_clock = 23500,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_TFT,
.power_on_delay = 0,
.power_off_delay = 0,
.name = "generic",
},
/* Sharp LQ043T1DG01 */
{
{
.x_res = 480,
.y_res = 272,
.pixel_clock = 9000,
.hsw = 42,
.hfp = 3,
.hbp = 2,
.vsw = 11,
.vfp = 3,
.vbp = 2,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO,
.power_on_delay = 50,
.power_off_delay = 100,
.name = "sharp_lq",
},
/* Sharp LS037V7DW01 */
{
{
.x_res = 480,
.y_res = 640,
.pixel_clock = 19200,
.hsw = 2,
.hfp = 1,
.hbp = 28,
.vsw = 1,
.vfp = 1,
.vbp = 1,
},
.acbi = 0x0,
.acb = 0x28,
.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS,
.power_on_delay = 50,
.power_off_delay = 100,
.name = "sharp_ls",
},
/* Toppoly TDO35S */
{
{
.x_res = 480,
.y_res = 640,
.pixel_clock = 26000,
.hfp = 104,
.hsw = 8,
.hbp = 8,
.vfp = 4,
.vsw = 2,
.vbp = 2,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC |
OMAP_DSS_LCD_ONOFF,
.power_on_delay = 0,
.power_off_delay = 0,
.name = "toppoly_tdo35s",
},
};
struct panel_drv_data {
struct omap_dss_device *dssdev;
struct panel_config *panel_config;
};
static inline struct panel_generic_dpi_data
*get_panel_data(const struct omap_dss_device *dssdev)
{
return (struct panel_generic_dpi_data *) dssdev->data;
}
static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
struct panel_config *panel_config = drv_data->panel_config;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
/* wait couple of vsyncs until enabling the LCD */
if (panel_config->power_on_delay)
msleep(panel_config->power_on_delay);
if (panel_data->platform_enable) {
r = panel_data->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void generic_dpi_panel_power_off(struct omap_dss_device *dssdev)
{
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
struct panel_config *panel_config = drv_data->panel_config;
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (panel_data->platform_disable)
panel_data->platform_disable(dssdev);
/* wait couple of vsyncs after disabling the LCD */
if (panel_config->power_off_delay)
msleep(panel_config->power_off_delay);
omapdss_dpi_display_disable(dssdev);
}
static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
{
struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
struct panel_config *panel_config = NULL;
struct panel_drv_data *drv_data = NULL;
int i;
dev_dbg(&dssdev->dev, "probe\n");
if (!panel_data || !panel_data->name)
return -EINVAL;
for (i = 0; i < ARRAY_SIZE(generic_dpi_panels); i++) {
if (strcmp(panel_data->name, generic_dpi_panels[i].name) == 0) {
panel_config = &generic_dpi_panels[i];
break;
}
}
if (!panel_config)
return -EINVAL;
dssdev->panel.config = panel_config->config;
dssdev->panel.timings = panel_config->timings;
dssdev->panel.acb = panel_config->acb;
dssdev->panel.acbi = panel_config->acbi;
drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL);
if (!drv_data)
return -ENOMEM;
drv_data->dssdev = dssdev;
drv_data->panel_config = panel_config;
dev_set_drvdata(&dssdev->dev, drv_data);
return 0;
}
static void generic_dpi_panel_remove(struct omap_dss_device *dssdev)
{
struct panel_drv_data *drv_data = dev_get_drvdata(&dssdev->dev);
dev_dbg(&dssdev->dev, "remove\n");
kfree(drv_data);
dev_set_drvdata(&dssdev->dev, NULL);
}
static int generic_dpi_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
r = generic_dpi_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void generic_dpi_panel_disable(struct omap_dss_device *dssdev)
{
generic_dpi_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int generic_dpi_panel_suspend(struct omap_dss_device *dssdev)
{
generic_dpi_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int generic_dpi_panel_resume(struct omap_dss_device *dssdev)
{
int r = 0;
r = generic_dpi_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
dpi_set_timings(dssdev, timings);
}
static void generic_dpi_panel_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
*timings = dssdev->panel.timings;
}
static int generic_dpi_panel_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
return dpi_check_timings(dssdev, timings);
}
static struct omap_dss_driver dpi_driver = {
.probe = generic_dpi_panel_probe,
.remove = generic_dpi_panel_remove,
.enable = generic_dpi_panel_enable,
.disable = generic_dpi_panel_disable,
.suspend = generic_dpi_panel_suspend,
.resume = generic_dpi_panel_resume,
.set_timings = generic_dpi_panel_set_timings,
.get_timings = generic_dpi_panel_get_timings,
.check_timings = generic_dpi_panel_check_timings,
.driver = {
.name = "generic_dpi_panel",
.owner = THIS_MODULE,
},
};
static int __init generic_dpi_panel_drv_init(void)
{
return omap_dss_register_driver(&dpi_driver);
}
static void __exit generic_dpi_panel_drv_exit(void)
{
omap_dss_unregister_driver(&dpi_driver);
}
module_init(generic_dpi_panel_drv_init);
module_exit(generic_dpi_panel_drv_exit);
MODULE_LICENSE("GPL");
/*
* Generic panel support
*
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <plat/display.h>
static struct omap_video_timings generic_panel_timings = {
/* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = 640,
.y_res = 480,
.pixel_clock = 23500,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
};
static int generic_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void generic_panel_power_off(struct omap_dss_device *dssdev)
{
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
omapdss_dpi_display_disable(dssdev);
}
static int generic_panel_probe(struct omap_dss_device *dssdev)
{
dssdev->panel.config = OMAP_DSS_LCD_TFT;
dssdev->panel.timings = generic_panel_timings;
return 0;
}
static void generic_panel_remove(struct omap_dss_device *dssdev)
{
}
static int generic_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
r = generic_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void generic_panel_disable(struct omap_dss_device *dssdev)
{
generic_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int generic_panel_suspend(struct omap_dss_device *dssdev)
{
generic_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int generic_panel_resume(struct omap_dss_device *dssdev)
{
int r = 0;
r = generic_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void generic_panel_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
dpi_set_timings(dssdev, timings);
}
static void generic_panel_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
*timings = dssdev->panel.timings;
}
static int generic_panel_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
return dpi_check_timings(dssdev, timings);
}
static struct omap_dss_driver generic_driver = {
.probe = generic_panel_probe,
.remove = generic_panel_remove,
.enable = generic_panel_enable,
.disable = generic_panel_disable,
.suspend = generic_panel_suspend,
.resume = generic_panel_resume,
.set_timings = generic_panel_set_timings,
.get_timings = generic_panel_get_timings,
.check_timings = generic_panel_check_timings,
.driver = {
.name = "generic_panel",
.owner = THIS_MODULE,
},
};
static int __init generic_panel_drv_init(void)
{
return omap_dss_register_driver(&generic_driver);
}
static void __exit generic_panel_drv_exit(void)
{
omap_dss_unregister_driver(&generic_driver);
}
module_init(generic_panel_drv_init);
module_exit(generic_panel_drv_exit);
MODULE_LICENSE("GPL");
/*
* Support for NEC-nl8048hl11-01b panel driver
*
* Copyright (C) 2010 Texas Instruments Inc.
* Author: Erik Gilling <konkers@android.com>
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/backlight.h>
#include <linux/fb.h>
#include <plat/display.h>
#define LCD_XRES 800
#define LCD_YRES 480
/*
* NEC PIX Clock Ratings
* MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
*/
#define LCD_PIXEL_CLOCK 23800
struct nec_8048_data {
struct backlight_device *bl;
};
static const struct {
unsigned char addr;
unsigned char dat;
} nec_8048_init_seq[] = {
{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 }, { 24, 0x25 },
{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F }, { 38, 0x0F },
{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0F },
{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F }, { 48, 0x0F },
{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 },
{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0C },
{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
};
/*
* NEC NL8048HL11-01B Manual
* defines HFB, HSW, HBP, VFP, VSW, VBP as shown below
*/
static struct omap_video_timings nec_8048_panel_timings = {
/* 800 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = LCD_XRES,
.y_res = LCD_YRES,
.pixel_clock = LCD_PIXEL_CLOCK,
.hfp = 6,
.hsw = 1,
.hbp = 4,
.vfp = 3,
.vsw = 1,
.vbp = 4,
};
static int nec_8048_bl_update_status(struct backlight_device *bl)
{
struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
int level;
if (!dssdev->set_backlight)
return -EINVAL;
if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
bl->props.power == FB_BLANK_UNBLANK)
level = bl->props.brightness;
else
level = 0;
return dssdev->set_backlight(dssdev, level);
}
static int nec_8048_bl_get_brightness(struct backlight_device *bl)
{
if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
bl->props.power == FB_BLANK_UNBLANK)
return bl->props.brightness;
return 0;
}
static const struct backlight_ops nec_8048_bl_ops = {
.get_brightness = nec_8048_bl_get_brightness,
.update_status = nec_8048_bl_update_status,
};
static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
{
struct backlight_device *bl;
struct nec_8048_data *necd;
struct backlight_properties props;
int r;
dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_RF |
OMAP_DSS_LCD_ONOFF;
dssdev->panel.timings = nec_8048_panel_timings;
necd = kzalloc(sizeof(*necd), GFP_KERNEL);
if (!necd)
return -ENOMEM;
dev_set_drvdata(&dssdev->dev, necd);
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 255;
bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev,
&nec_8048_bl_ops, &props);
if (IS_ERR(bl)) {
r = PTR_ERR(bl);
kfree(necd);
return r;
}
necd->bl = bl;
bl->props.fb_blank = FB_BLANK_UNBLANK;
bl->props.power = FB_BLANK_UNBLANK;
bl->props.max_brightness = dssdev->max_backlight_level;
bl->props.brightness = dssdev->max_backlight_level;
r = nec_8048_bl_update_status(bl);
if (r < 0)
dev_err(&dssdev->dev, "failed to set lcd brightness\n");
return 0;
}
static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
{
struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
struct backlight_device *bl = necd->bl;
bl->props.power = FB_BLANK_POWERDOWN;
nec_8048_bl_update_status(bl);
backlight_device_unregister(bl);
kfree(necd);
}
static int nec_8048_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
struct backlight_device *bl = necd->bl;
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
return r;
}
r = nec_8048_bl_update_status(bl);
if (r < 0)
dev_err(&dssdev->dev, "failed to set lcd brightness\n");
r = omapdss_dpi_display_enable(dssdev);
return r;
}
static void nec_8048_panel_disable(struct omap_dss_device *dssdev)
{
struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
struct backlight_device *bl = necd->bl;
omapdss_dpi_display_disable(dssdev);
bl->props.brightness = 0;
nec_8048_bl_update_status(bl);
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
}
static int nec_8048_panel_suspend(struct omap_dss_device *dssdev)
{
nec_8048_panel_disable(dssdev);
return 0;
}
static int nec_8048_panel_resume(struct omap_dss_device *dssdev)
{
return nec_8048_panel_enable(dssdev);
}
static int nec_8048_recommended_bpp(struct omap_dss_device *dssdev)
{
return 16;
}
static struct omap_dss_driver nec_8048_driver = {
.probe = nec_8048_panel_probe,
.remove = nec_8048_panel_remove,
.enable = nec_8048_panel_enable,
.disable = nec_8048_panel_disable,
.suspend = nec_8048_panel_suspend,
.resume = nec_8048_panel_resume,
.get_recommended_bpp = nec_8048_recommended_bpp,
.driver = {
.name = "NEC_8048_panel",
.owner = THIS_MODULE,
},
};
static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
unsigned char reg_data)
{
int ret = 0;
unsigned int cmd = 0, data = 0;
cmd = 0x0000 | reg_addr; /* register address write */
data = 0x0100 | reg_data ; /* register data write */
data = (cmd << 16) | data;
ret = spi_write(spi, (unsigned char *)&data, 4);
if (ret)
pr_err("error in spi_write %x\n", data);
return ret;
}
static int init_nec_8048_wvga_lcd(struct spi_device *spi)
{
unsigned int i;
/* Initialization Sequence */
/* nec_8048_spi_send(spi, REG, VAL) */
for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
udelay(20);
nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
nec_8048_init_seq[i].dat);
return 0;
}
static int nec_8048_spi_probe(struct spi_device *spi)
{
spi->mode = SPI_MODE_0;
spi->bits_per_word = 32;
spi_setup(spi);
init_nec_8048_wvga_lcd(spi);
return omap_dss_register_driver(&nec_8048_driver);
}
static int nec_8048_spi_remove(struct spi_device *spi)
{
omap_dss_unregister_driver(&nec_8048_driver);
return 0;
}
static int nec_8048_spi_suspend(struct spi_device *spi, pm_message_t mesg)
{
nec_8048_spi_send(spi, 2, 0x01);
mdelay(40);
return 0;
}
static int nec_8048_spi_resume(struct spi_device *spi)
{
/* reinitialize the panel */
spi_setup(spi);
nec_8048_spi_send(spi, 2, 0x00);
init_nec_8048_wvga_lcd(spi);
return 0;
}
static struct spi_driver nec_8048_spi_driver = {
.probe = nec_8048_spi_probe,
.remove = __devexit_p(nec_8048_spi_remove),
.suspend = nec_8048_spi_suspend,
.resume = nec_8048_spi_resume,
.driver = {
.name = "nec_8048_spi",
.bus = &spi_bus_type,
.owner = THIS_MODULE,
},
};
static int __init nec_8048_lcd_init(void)
{
return spi_register_driver(&nec_8048_spi_driver);
}
static void __exit nec_8048_lcd_exit(void)
{
return spi_unregister_driver(&nec_8048_spi_driver);
}
module_init(nec_8048_lcd_init);
module_exit(nec_8048_lcd_exit);
MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
MODULE_DESCRIPTION("NEC-nl8048hl11-01b Driver");
MODULE_LICENSE("GPL");
/*
* LCD panel driver for Sharp LQ043T1DG01
*
* Copyright (C) 2009 Texas Instruments Inc
* Author: Vaibhav Hiremath <hvaibhav@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <plat/display.h>
static struct omap_video_timings sharp_lq_timings = {
.x_res = 480,
.y_res = 272,
.pixel_clock = 9000,
.hsw = 42,
.hfp = 3,
.hbp = 2,
.vsw = 11,
.vfp = 3,
.vbp = 2,
};
static int sharp_lq_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void sharp_lq_panel_power_off(struct omap_dss_device *dssdev)
{
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
/* wait at least 5 vsyncs after disabling the LCD */
msleep(100);
omapdss_dpi_display_disable(dssdev);
}
static int sharp_lq_panel_probe(struct omap_dss_device *dssdev)
{
dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO;
dssdev->panel.acb = 0x0;
dssdev->panel.timings = sharp_lq_timings;
return 0;
}
static void sharp_lq_panel_remove(struct omap_dss_device *dssdev)
{
}
static int sharp_lq_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
r = sharp_lq_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void sharp_lq_panel_disable(struct omap_dss_device *dssdev)
{
sharp_lq_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int sharp_lq_panel_suspend(struct omap_dss_device *dssdev)
{
sharp_lq_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int sharp_lq_panel_resume(struct omap_dss_device *dssdev)
{
int r = 0;
r = sharp_lq_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static struct omap_dss_driver sharp_lq_driver = {
.probe = sharp_lq_panel_probe,
.remove = sharp_lq_panel_remove,
.enable = sharp_lq_panel_enable,
.disable = sharp_lq_panel_disable,
.suspend = sharp_lq_panel_suspend,
.resume = sharp_lq_panel_resume,
.driver = {
.name = "sharp_lq_panel",
.owner = THIS_MODULE,
},
};
static int __init sharp_lq_panel_drv_init(void)
{
return omap_dss_register_driver(&sharp_lq_driver);
}
static void __exit sharp_lq_panel_drv_exit(void)
{
omap_dss_unregister_driver(&sharp_lq_driver);
}
module_init(sharp_lq_panel_drv_init);
module_exit(sharp_lq_panel_drv_exit);
MODULE_LICENSE("GPL");
/*
* LCD panel driver for Toppoly TDO35S
*
* Copyright (C) 2009 CompuLab, Ltd.
* Author: Mike Rapoport <mike@compulab.co.il>
*
* Based on generic panel support
* Copyright (C) 2008 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <plat/display.h>
static struct omap_video_timings toppoly_tdo_panel_timings = {
/* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = 480,
.y_res = 640,
.pixel_clock = 26000,
.hfp = 104,
.hsw = 8,
.hbp = 8,
.vfp = 4,
.vsw = 2,
.vbp = 2,
};
static int toppoly_tdo_panel_power_on(struct omap_dss_device *dssdev)
{
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
if (dssdev->platform_enable) {
r = dssdev->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
{
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (dssdev->platform_disable)
dssdev->platform_disable(dssdev);
omapdss_dpi_display_disable(dssdev);
}
static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
{
dssdev->panel.config = OMAP_DSS_LCD_TFT |
OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS |
OMAP_DSS_LCD_IPC |
OMAP_DSS_LCD_ONOFF;
dssdev->panel.timings = toppoly_tdo_panel_timings;
return 0;
}
static void toppoly_tdo_panel_remove(struct omap_dss_device *dssdev)
{
}
static int toppoly_tdo_panel_enable(struct omap_dss_device *dssdev)
{
int r = 0;
r = toppoly_tdo_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static void toppoly_tdo_panel_disable(struct omap_dss_device *dssdev)
{
toppoly_tdo_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
static int toppoly_tdo_panel_suspend(struct omap_dss_device *dssdev)
{
toppoly_tdo_panel_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
return 0;
}
static int toppoly_tdo_panel_resume(struct omap_dss_device *dssdev)
{
int r = 0;
r = toppoly_tdo_panel_power_on(dssdev);
if (r)
return r;
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
return 0;
}
static struct omap_dss_driver generic_driver = {
.probe = toppoly_tdo_panel_probe,
.remove = toppoly_tdo_panel_remove,
.enable = toppoly_tdo_panel_enable,
.disable = toppoly_tdo_panel_disable,
.suspend = toppoly_tdo_panel_suspend,
.resume = toppoly_tdo_panel_resume,
.driver = {
.name = "toppoly_tdo35s_panel",
.owner = THIS_MODULE,
},
};
static int __init toppoly_tdo_panel_drv_init(void)
{
return omap_dss_register_driver(&generic_driver);
}
static void __exit toppoly_tdo_panel_drv_exit(void)
{
omap_dss_unregister_driver(&generic_driver);
}
module_init(toppoly_tdo_panel_drv_init);
module_exit(toppoly_tdo_panel_drv_exit);
MODULE_LICENSE("GPL");
This diff is collapsed.
...@@ -40,8 +40,9 @@ static struct { ...@@ -40,8 +40,9 @@ static struct {
} dpi; } dpi;
#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, static int dpi_set_dsi_clk(struct omap_dss_device *dssdev, bool is_tft,
unsigned long *fck, int *lck_div, int *pck_div) unsigned long pck_req, unsigned long *fck, int *lck_div,
int *pck_div)
{ {
struct dsi_clock_info dsi_cinfo; struct dsi_clock_info dsi_cinfo;
struct dispc_clock_info dispc_cinfo; struct dispc_clock_info dispc_cinfo;
...@@ -58,7 +59,7 @@ static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, ...@@ -58,7 +59,7 @@ static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req,
dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK); dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK);
r = dispc_set_clock_div(&dispc_cinfo); r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r) if (r)
return r; return r;
...@@ -69,8 +70,9 @@ static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req, ...@@ -69,8 +70,9 @@ static int dpi_set_dsi_clk(bool is_tft, unsigned long pck_req,
return 0; return 0;
} }
#else #else
static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req, static int dpi_set_dispc_clk(struct omap_dss_device *dssdev, bool is_tft,
unsigned long *fck, int *lck_div, int *pck_div) unsigned long pck_req, unsigned long *fck, int *lck_div,
int *pck_div)
{ {
struct dss_clock_info dss_cinfo; struct dss_clock_info dss_cinfo;
struct dispc_clock_info dispc_cinfo; struct dispc_clock_info dispc_cinfo;
...@@ -84,7 +86,7 @@ static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req, ...@@ -84,7 +86,7 @@ static int dpi_set_dispc_clk(bool is_tft, unsigned long pck_req,
if (r) if (r)
return r; return r;
r = dispc_set_clock_div(&dispc_cinfo); r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r) if (r)
return r; return r;
...@@ -107,17 +109,17 @@ static int dpi_set_mode(struct omap_dss_device *dssdev) ...@@ -107,17 +109,17 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acb); dssdev->panel.acbi, dssdev->panel.acb);
is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
#ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL #ifdef CONFIG_OMAP2_DSS_USE_DSI_PLL
r = dpi_set_dsi_clk(is_tft, t->pixel_clock * 1000, r = dpi_set_dsi_clk(dssdev, is_tft, t->pixel_clock * 1000, &fck,
&fck, &lck_div, &pck_div); &lck_div, &pck_div);
#else #else
r = dpi_set_dispc_clk(is_tft, t->pixel_clock * 1000, r = dpi_set_dispc_clk(dssdev, is_tft, t->pixel_clock * 1000, &fck,
&fck, &lck_div, &pck_div); &lck_div, &pck_div);
#endif #endif
if (r) if (r)
goto err0; goto err0;
...@@ -132,7 +134,7 @@ static int dpi_set_mode(struct omap_dss_device *dssdev) ...@@ -132,7 +134,7 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
t->pixel_clock = pck; t->pixel_clock = pck;
} }
dispc_set_lcd_timings(t); dispc_set_lcd_timings(dssdev->manager->id, t);
err0: err0:
dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1);
...@@ -145,10 +147,12 @@ static int dpi_basic_init(struct omap_dss_device *dssdev) ...@@ -145,10 +147,12 @@ static int dpi_basic_init(struct omap_dss_device *dssdev)
is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0; is_tft = (dssdev->panel.config & OMAP_DSS_LCD_TFT) != 0;
dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); dispc_set_parallel_interface_mode(dssdev->manager->id,
dispc_set_lcd_display_type(is_tft ? OMAP_DSS_LCD_DISPLAY_TFT : OMAP_DSS_PARALLELMODE_BYPASS);
OMAP_DSS_LCD_DISPLAY_STN); dispc_set_lcd_display_type(dssdev->manager->id, is_tft ?
dispc_set_tft_data_lines(dssdev->phy.dpi.data_lines); OMAP_DSS_LCD_DISPLAY_TFT : OMAP_DSS_LCD_DISPLAY_STN);
dispc_set_tft_data_lines(dssdev->manager->id,
dssdev->phy.dpi.data_lines);
return 0; return 0;
} }
...@@ -234,7 +238,7 @@ void dpi_set_timings(struct omap_dss_device *dssdev, ...@@ -234,7 +238,7 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
dssdev->panel.timings = *timings; dssdev->panel.timings = *timings;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) { if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
dpi_set_mode(dssdev); dpi_set_mode(dssdev);
dispc_go(OMAP_DSS_CHANNEL_LCD); dispc_go(dssdev->manager->id);
} }
} }
EXPORT_SYMBOL(dpi_set_timings); EXPORT_SYMBOL(dpi_set_timings);
......
...@@ -792,7 +792,8 @@ static int dsi_pll_power(enum dsi_pll_power_state state) ...@@ -792,7 +792,8 @@ static int dsi_pll_power(enum dsi_pll_power_state state)
} }
/* calculate clock rates using dividers in cinfo */ /* calculate clock rates using dividers in cinfo */
static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo) static int dsi_calc_clock_rates(struct omap_dss_device *dssdev,
struct dsi_clock_info *cinfo)
{ {
if (cinfo->regn == 0 || cinfo->regn > REGN_MAX) if (cinfo->regn == 0 || cinfo->regn > REGN_MAX)
return -EINVAL; return -EINVAL;
...@@ -812,7 +813,7 @@ static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo) ...@@ -812,7 +813,7 @@ static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo)
* with DSS2_FCK source also */ * with DSS2_FCK source also */
cinfo->highfreq = 0; cinfo->highfreq = 0;
} else { } else {
cinfo->clkin = dispc_pclk_rate(); cinfo->clkin = dispc_pclk_rate(dssdev->manager->id);
if (cinfo->clkin < 32000000) if (cinfo->clkin < 32000000)
cinfo->highfreq = 0; cinfo->highfreq = 0;
...@@ -1206,8 +1207,8 @@ void dsi_dump_clocks(struct seq_file *s) ...@@ -1206,8 +1207,8 @@ void dsi_dump_clocks(struct seq_file *s)
seq_printf(s, "VP_CLK\t\t%lu\n" seq_printf(s, "VP_CLK\t\t%lu\n"
"VP_PCLK\t\t%lu\n", "VP_PCLK\t\t%lu\n",
dispc_lclk_rate(), dispc_lclk_rate(OMAP_DSS_CHANNEL_LCD),
dispc_pclk_rate()); dispc_pclk_rate(OMAP_DSS_CHANNEL_LCD));
enable_clocks(0); enable_clocks(0);
} }
...@@ -2888,7 +2889,7 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev, ...@@ -2888,7 +2889,7 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
dss_setup_partial_planes(dssdev, x, y, w, h, dss_setup_partial_planes(dssdev, x, y, w, h,
enlarge_update_area); enlarge_update_area);
dispc_set_lcd_size(*w, *h); dispc_set_lcd_size(dssdev->manager->id, *w, *h);
} }
return 0; return 0;
...@@ -2947,12 +2948,14 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev) ...@@ -2947,12 +2948,14 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
return r; return r;
} }
dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); dispc_set_lcd_display_type(dssdev->manager->id,
OMAP_DSS_LCD_DISPLAY_TFT);
dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); dispc_set_parallel_interface_mode(dssdev->manager->id,
dispc_enable_fifohandcheck(1); OMAP_DSS_PARALLELMODE_DSI);
dispc_enable_fifohandcheck(dssdev->manager->id, 1);
dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); dispc_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
{ {
struct omap_video_timings timings = { struct omap_video_timings timings = {
...@@ -2964,7 +2967,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev) ...@@ -2964,7 +2967,7 @@ static int dsi_display_init_dispc(struct omap_dss_device *dssdev)
.vbp = 0, .vbp = 0,
}; };
dispc_set_lcd_timings(&timings); dispc_set_lcd_timings(dssdev->manager->id, &timings);
} }
return 0; return 0;
...@@ -2987,7 +2990,7 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev) ...@@ -2987,7 +2990,7 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
cinfo.regm = dssdev->phy.dsi.div.regm; cinfo.regm = dssdev->phy.dsi.div.regm;
cinfo.regm3 = dssdev->phy.dsi.div.regm3; cinfo.regm3 = dssdev->phy.dsi.div.regm3;
cinfo.regm4 = dssdev->phy.dsi.div.regm4; cinfo.regm4 = dssdev->phy.dsi.div.regm4;
r = dsi_calc_clock_rates(&cinfo); r = dsi_calc_clock_rates(dssdev, &cinfo);
if (r) { if (r) {
DSSERR("Failed to calc dsi clocks\n"); DSSERR("Failed to calc dsi clocks\n");
return r; return r;
...@@ -3019,7 +3022,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev) ...@@ -3019,7 +3022,7 @@ static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev)
return r; return r;
} }
r = dispc_set_clock_div(&dispc_cinfo); r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r) { if (r) {
DSSERR("Failed to set dispc clocks\n"); DSSERR("Failed to set dispc clocks\n");
return r; return r;
......
...@@ -333,9 +333,9 @@ void dispc_disable_sidle(void); ...@@ -333,9 +333,9 @@ void dispc_disable_sidle(void);
void dispc_lcd_enable_signal_polarity(bool act_high); void dispc_lcd_enable_signal_polarity(bool act_high);
void dispc_lcd_enable_signal(bool enable); void dispc_lcd_enable_signal(bool enable);
void dispc_pck_free_enable(bool enable); void dispc_pck_free_enable(bool enable);
void dispc_enable_fifohandcheck(bool enable); void dispc_enable_fifohandcheck(enum omap_channel channel, bool enable);
void dispc_set_lcd_size(u16 width, u16 height); void dispc_set_lcd_size(enum omap_channel channel, u16 width, u16 height);
void dispc_set_digit_size(u16 width, u16 height); void dispc_set_digit_size(u16 width, u16 height);
u32 dispc_get_plane_fifo_size(enum omap_plane plane); u32 dispc_get_plane_fifo_size(enum omap_plane plane);
void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high); void dispc_setup_plane_fifo(enum omap_plane plane, u32 low, u32 high);
...@@ -359,7 +359,8 @@ int dispc_setup_plane(enum omap_plane plane, ...@@ -359,7 +359,8 @@ int dispc_setup_plane(enum omap_plane plane,
bool ilace, bool ilace,
enum omap_dss_rotation_type rotation_type, enum omap_dss_rotation_type rotation_type,
u8 rotation, bool mirror, u8 rotation, bool mirror,
u8 global_alpha); u8 global_alpha, u8 pre_mult_alpha,
enum omap_channel channel);
bool dispc_go_busy(enum omap_channel channel); bool dispc_go_busy(enum omap_channel channel);
void dispc_go(enum omap_channel channel); void dispc_go(enum omap_channel channel);
...@@ -368,9 +369,11 @@ bool dispc_is_channel_enabled(enum omap_channel channel); ...@@ -368,9 +369,11 @@ bool dispc_is_channel_enabled(enum omap_channel channel);
int dispc_enable_plane(enum omap_plane plane, bool enable); int dispc_enable_plane(enum omap_plane plane, bool enable);
void dispc_enable_replication(enum omap_plane plane, bool enable); void dispc_enable_replication(enum omap_plane plane, bool enable);
void dispc_set_parallel_interface_mode(enum omap_parallel_interface_mode mode); void dispc_set_parallel_interface_mode(enum omap_channel channel,
void dispc_set_tft_data_lines(u8 data_lines); enum omap_parallel_interface_mode mode);
void dispc_set_lcd_display_type(enum omap_lcd_display_type type); void dispc_set_tft_data_lines(enum omap_channel channel, u8 data_lines);
void dispc_set_lcd_display_type(enum omap_channel channel,
enum omap_lcd_display_type type);
void dispc_set_loadmode(enum omap_dss_load_mode mode); void dispc_set_loadmode(enum omap_dss_load_mode mode);
void dispc_set_default_color(enum omap_channel channel, u32 color); void dispc_set_default_color(enum omap_channel channel, u32 color);
...@@ -387,17 +390,21 @@ bool dispc_trans_key_enabled(enum omap_channel ch); ...@@ -387,17 +390,21 @@ bool dispc_trans_key_enabled(enum omap_channel ch);
bool dispc_alpha_blending_enabled(enum omap_channel ch); bool dispc_alpha_blending_enabled(enum omap_channel ch);
bool dispc_lcd_timings_ok(struct omap_video_timings *timings); bool dispc_lcd_timings_ok(struct omap_video_timings *timings);
void dispc_set_lcd_timings(struct omap_video_timings *timings); void dispc_set_lcd_timings(enum omap_channel channel,
struct omap_video_timings *timings);
unsigned long dispc_fclk_rate(void); unsigned long dispc_fclk_rate(void);
unsigned long dispc_lclk_rate(void); unsigned long dispc_lclk_rate(enum omap_channel channel);
unsigned long dispc_pclk_rate(void); unsigned long dispc_pclk_rate(enum omap_channel channel);
void dispc_set_pol_freq(enum omap_panel_config config, u8 acbi, u8 acb); void dispc_set_pol_freq(enum omap_channel channel,
enum omap_panel_config config, u8 acbi, u8 acb);
void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck, void dispc_find_clk_divs(bool is_tft, unsigned long req_pck, unsigned long fck,
struct dispc_clock_info *cinfo); struct dispc_clock_info *cinfo);
int dispc_calc_clock_rates(unsigned long dispc_fclk_rate, int dispc_calc_clock_rates(unsigned long dispc_fclk_rate,
struct dispc_clock_info *cinfo); struct dispc_clock_info *cinfo);
int dispc_set_clock_div(struct dispc_clock_info *cinfo); int dispc_set_clock_div(enum omap_channel channel,
int dispc_get_clock_div(struct dispc_clock_info *cinfo); struct dispc_clock_info *cinfo);
int dispc_get_clock_div(enum omap_channel channel,
struct dispc_clock_info *cinfo);
/* VENC */ /* VENC */
...@@ -424,8 +431,8 @@ void rfbi_dump_regs(struct seq_file *s); ...@@ -424,8 +431,8 @@ void rfbi_dump_regs(struct seq_file *s);
int rfbi_configure(int rfbi_module, int bpp, int lines); int rfbi_configure(int rfbi_module, int bpp, int lines);
void rfbi_enable_rfbi(bool enable); void rfbi_enable_rfbi(bool enable);
void rfbi_transfer_area(u16 width, u16 height, void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
void (callback)(void *data), void *data); u16 height, void (callback)(void *data), void *data);
void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t);
unsigned long rfbi_get_max_tx_rate(void); unsigned long rfbi_get_max_tx_rate(void);
int rfbi_init_display(struct omap_dss_device *display); int rfbi_init_display(struct omap_dss_device *display);
......
...@@ -82,6 +82,18 @@ static const enum omap_display_type omap3_dss_supported_displays[] = { ...@@ -82,6 +82,18 @@ static const enum omap_display_type omap3_dss_supported_displays[] = {
OMAP_DISPLAY_TYPE_VENC, OMAP_DISPLAY_TYPE_VENC,
}; };
static const enum omap_display_type omap4_dss_supported_displays[] = {
/* OMAP_DSS_CHANNEL_LCD */
OMAP_DISPLAY_TYPE_DBI | OMAP_DISPLAY_TYPE_DSI,
/* OMAP_DSS_CHANNEL_DIGIT */
OMAP_DISPLAY_TYPE_VENC,
/* OMAP_DSS_CHANNEL_LCD2 */
OMAP_DISPLAY_TYPE_DPI | OMAP_DISPLAY_TYPE_DBI |
OMAP_DISPLAY_TYPE_DSI,
};
static const enum omap_color_mode omap2_dss_supported_color_modes[] = { static const enum omap_color_mode omap2_dss_supported_color_modes[] = {
/* OMAP_DSS_GFX */ /* OMAP_DSS_GFX */
OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
...@@ -127,6 +139,10 @@ static struct omap_dss_features omap2_dss_features = { ...@@ -127,6 +139,10 @@ static struct omap_dss_features omap2_dss_features = {
.reg_fields = omap2_dss_reg_fields, .reg_fields = omap2_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap2_dss_reg_fields), .num_reg_fields = ARRAY_SIZE(omap2_dss_reg_fields),
.has_feature =
FEAT_LCDENABLEPOL | FEAT_LCDENABLESIGNAL |
FEAT_PCKFREEENABLE | FEAT_FUNCGATED,
.num_mgrs = 2, .num_mgrs = 2,
.num_ovls = 3, .num_ovls = 3,
.supported_displays = omap2_dss_supported_displays, .supported_displays = omap2_dss_supported_displays,
...@@ -134,11 +150,29 @@ static struct omap_dss_features omap2_dss_features = { ...@@ -134,11 +150,29 @@ static struct omap_dss_features omap2_dss_features = {
}; };
/* OMAP3 DSS Features */ /* OMAP3 DSS Features */
static struct omap_dss_features omap3_dss_features = { static struct omap_dss_features omap3430_dss_features = {
.reg_fields = omap3_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.has_feature =
FEAT_GLOBAL_ALPHA | FEAT_LCDENABLEPOL |
FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
FEAT_FUNCGATED,
.num_mgrs = 2,
.num_ovls = 3,
.supported_displays = omap3_dss_supported_displays,
.supported_color_modes = omap3_dss_supported_color_modes,
};
static struct omap_dss_features omap3630_dss_features = {
.reg_fields = omap3_dss_reg_fields, .reg_fields = omap3_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields), .num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.has_feature = FEAT_GLOBAL_ALPHA, .has_feature =
FEAT_GLOBAL_ALPHA | FEAT_LCDENABLEPOL |
FEAT_LCDENABLESIGNAL | FEAT_PCKFREEENABLE |
FEAT_PRE_MULT_ALPHA | FEAT_FUNCGATED,
.num_mgrs = 2, .num_mgrs = 2,
.num_ovls = 3, .num_ovls = 3,
...@@ -146,6 +180,21 @@ static struct omap_dss_features omap3_dss_features = { ...@@ -146,6 +180,21 @@ static struct omap_dss_features omap3_dss_features = {
.supported_color_modes = omap3_dss_supported_color_modes, .supported_color_modes = omap3_dss_supported_color_modes,
}; };
/* OMAP4 DSS Features */
static struct omap_dss_features omap4_dss_features = {
.reg_fields = omap3_dss_reg_fields,
.num_reg_fields = ARRAY_SIZE(omap3_dss_reg_fields),
.has_feature =
FEAT_GLOBAL_ALPHA | FEAT_PRE_MULT_ALPHA |
FEAT_MGR_LCD2,
.num_mgrs = 3,
.num_ovls = 3,
.supported_displays = omap4_dss_supported_displays,
.supported_color_modes = omap3_dss_supported_color_modes,
};
/* Functions returning values related to a DSS feature */ /* Functions returning values related to a DSS feature */
int dss_feat_get_num_mgrs(void) int dss_feat_get_num_mgrs(void)
{ {
...@@ -167,6 +216,13 @@ enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane) ...@@ -167,6 +216,13 @@ enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane)
return omap_current_dss_features->supported_color_modes[plane]; return omap_current_dss_features->supported_color_modes[plane];
} }
bool dss_feat_color_mode_supported(enum omap_plane plane,
enum omap_color_mode color_mode)
{
return omap_current_dss_features->supported_color_modes[plane] &
color_mode;
}
/* DSS has_feature check */ /* DSS has_feature check */
bool dss_has_feature(enum dss_feat_id id) bool dss_has_feature(enum dss_feat_id id)
{ {
...@@ -186,6 +242,10 @@ void dss_features_init(void) ...@@ -186,6 +242,10 @@ void dss_features_init(void)
{ {
if (cpu_is_omap24xx()) if (cpu_is_omap24xx())
omap_current_dss_features = &omap2_dss_features; omap_current_dss_features = &omap2_dss_features;
else if (cpu_is_omap3630())
omap_current_dss_features = &omap3630_dss_features;
else if (cpu_is_omap34xx())
omap_current_dss_features = &omap3430_dss_features;
else else
omap_current_dss_features = &omap3_dss_features; omap_current_dss_features = &omap4_dss_features;
} }
...@@ -20,13 +20,19 @@ ...@@ -20,13 +20,19 @@
#ifndef __OMAP2_DSS_FEATURES_H #ifndef __OMAP2_DSS_FEATURES_H
#define __OMAP2_DSS_FEATURES_H #define __OMAP2_DSS_FEATURES_H
#define MAX_DSS_MANAGERS 2 #define MAX_DSS_MANAGERS 3
#define MAX_DSS_OVERLAYS 3 #define MAX_DSS_OVERLAYS 3
/* DSS has feature id */ /* DSS has feature id */
enum dss_feat_id { enum dss_feat_id {
FEAT_GLOBAL_ALPHA = 1 << 0, FEAT_GLOBAL_ALPHA = 1 << 0,
FEAT_GLOBAL_ALPHA_VID1 = 1 << 1, FEAT_GLOBAL_ALPHA_VID1 = 1 << 1,
FEAT_PRE_MULT_ALPHA = 1 << 2,
FEAT_LCDENABLEPOL = 1 << 3,
FEAT_LCDENABLESIGNAL = 1 << 4,
FEAT_PCKFREEENABLE = 1 << 5,
FEAT_FUNCGATED = 1 << 6,
FEAT_MGR_LCD2 = 1 << 7,
}; };
/* DSS register field id */ /* DSS register field id */
...@@ -43,6 +49,8 @@ int dss_feat_get_num_mgrs(void); ...@@ -43,6 +49,8 @@ int dss_feat_get_num_mgrs(void);
int dss_feat_get_num_ovls(void); int dss_feat_get_num_ovls(void);
enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel); enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel);
enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane); enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane);
bool dss_feat_color_mode_supported(enum omap_plane plane,
enum omap_color_mode color_mode);
bool dss_has_feature(enum dss_feat_id id); bool dss_has_feature(enum dss_feat_id id);
void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end); void dss_feat_get_reg_field(enum dss_feat_reg_field id, u8 *start, u8 *end);
......
...@@ -406,6 +406,7 @@ struct overlay_cache_data { ...@@ -406,6 +406,7 @@ struct overlay_cache_data {
u16 out_width; /* if 0, out_width == width */ u16 out_width; /* if 0, out_width == width */
u16 out_height; /* if 0, out_height == height */ u16 out_height; /* if 0, out_height == height */
u8 global_alpha; u8 global_alpha;
u8 pre_mult_alpha;
enum omap_channel channel; enum omap_channel channel;
bool replication; bool replication;
...@@ -512,11 +513,14 @@ static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr) ...@@ -512,11 +513,14 @@ static int dss_mgr_wait_for_vsync(struct omap_overlay_manager *mgr)
unsigned long timeout = msecs_to_jiffies(500); unsigned long timeout = msecs_to_jiffies(500);
u32 irq; u32 irq;
if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) if (mgr->device->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD; irq = DISPC_IRQ_EVSYNC_ODD;
else } else {
irq = DISPC_IRQ_VSYNC; if (mgr->id == OMAP_DSS_CHANNEL_LCD)
irq = DISPC_IRQ_VSYNC;
else
irq = DISPC_IRQ_VSYNC2;
}
return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout); return omap_dispc_wait_for_irq_interruptible_timeout(irq, timeout);
} }
...@@ -524,7 +528,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) ...@@ -524,7 +528,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
{ {
unsigned long timeout = msecs_to_jiffies(500); unsigned long timeout = msecs_to_jiffies(500);
struct manager_cache_data *mc; struct manager_cache_data *mc;
enum omap_channel channel;
u32 irq; u32 irq;
int r; int r;
int i; int i;
...@@ -535,7 +538,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) ...@@ -535,7 +538,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
channel = OMAP_DSS_CHANNEL_DIGIT;
} else { } else {
if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
enum omap_dss_update_mode mode; enum omap_dss_update_mode mode;
...@@ -543,11 +545,14 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) ...@@ -543,11 +545,14 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
if (mode != OMAP_DSS_UPDATE_AUTO) if (mode != OMAP_DSS_UPDATE_AUTO)
return 0; return 0;
irq = DISPC_IRQ_FRAMEDONE; irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
DISPC_IRQ_FRAMEDONE
: DISPC_IRQ_FRAMEDONE2;
} else { } else {
irq = DISPC_IRQ_VSYNC; irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
DISPC_IRQ_VSYNC
: DISPC_IRQ_VSYNC2;
} }
channel = OMAP_DSS_CHANNEL_LCD;
} }
mc = &dss_cache.manager_cache[mgr->id]; mc = &dss_cache.manager_cache[mgr->id];
...@@ -594,7 +599,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr) ...@@ -594,7 +599,6 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
{ {
unsigned long timeout = msecs_to_jiffies(500); unsigned long timeout = msecs_to_jiffies(500);
enum omap_channel channel;
struct overlay_cache_data *oc; struct overlay_cache_data *oc;
struct omap_dss_device *dssdev; struct omap_dss_device *dssdev;
u32 irq; u32 irq;
...@@ -611,7 +615,6 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) ...@@ -611,7 +615,6 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) { if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN; irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
channel = OMAP_DSS_CHANNEL_DIGIT;
} else { } else {
if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) { if (dssdev->caps & OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
enum omap_dss_update_mode mode; enum omap_dss_update_mode mode;
...@@ -619,11 +622,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl) ...@@ -619,11 +622,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
if (mode != OMAP_DSS_UPDATE_AUTO) if (mode != OMAP_DSS_UPDATE_AUTO)
return 0; return 0;
irq = DISPC_IRQ_FRAMEDONE; irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
DISPC_IRQ_FRAMEDONE
: DISPC_IRQ_FRAMEDONE2;
} else { } else {
irq = DISPC_IRQ_VSYNC; irq = (dssdev->manager->id == OMAP_DSS_CHANNEL_LCD) ?
DISPC_IRQ_VSYNC
: DISPC_IRQ_VSYNC2;
} }
channel = OMAP_DSS_CHANNEL_LCD;
} }
oc = &dss_cache.overlay_cache[ovl->id]; oc = &dss_cache.overlay_cache[ovl->id];
...@@ -842,7 +848,9 @@ static int configure_overlay(enum omap_plane plane) ...@@ -842,7 +848,9 @@ static int configure_overlay(enum omap_plane plane)
c->rotation_type, c->rotation_type,
c->rotation, c->rotation,
c->mirror, c->mirror,
c->global_alpha); c->global_alpha,
c->pre_mult_alpha,
c->channel);
if (r) { if (r) {
/* this shouldn't happen */ /* this shouldn't happen */
...@@ -894,10 +902,10 @@ static int configure_dispc(void) ...@@ -894,10 +902,10 @@ static int configure_dispc(void)
r = 0; r = 0;
busy = false; busy = false;
mgr_busy[0] = dispc_go_busy(0); for (i = 0; i < num_mgrs; i++) {
mgr_busy[1] = dispc_go_busy(1); mgr_busy[i] = dispc_go_busy(i);
mgr_go[0] = false; mgr_go[i] = false;
mgr_go[1] = false; }
/* Commit overlay settings */ /* Commit overlay settings */
for (i = 0; i < num_ovls; ++i) { for (i = 0; i < num_ovls; ++i) {
...@@ -1156,9 +1164,10 @@ static void dss_apply_irq_handler(void *data, u32 mask) ...@@ -1156,9 +1164,10 @@ static void dss_apply_irq_handler(void *data, u32 mask)
const int num_mgrs = dss_feat_get_num_mgrs(); const int num_mgrs = dss_feat_get_num_mgrs();
int i, r; int i, r;
bool mgr_busy[MAX_DSS_MANAGERS]; bool mgr_busy[MAX_DSS_MANAGERS];
u32 irq_mask;
mgr_busy[0] = dispc_go_busy(0); for (i = 0; i < num_mgrs; i++)
mgr_busy[1] = dispc_go_busy(1); mgr_busy[i] = dispc_go_busy(i);
spin_lock(&dss_cache.lock); spin_lock(&dss_cache.lock);
...@@ -1179,8 +1188,8 @@ static void dss_apply_irq_handler(void *data, u32 mask) ...@@ -1179,8 +1188,8 @@ static void dss_apply_irq_handler(void *data, u32 mask)
goto end; goto end;
/* re-read busy flags */ /* re-read busy flags */
mgr_busy[0] = dispc_go_busy(0); for (i = 0; i < num_mgrs; i++)
mgr_busy[1] = dispc_go_busy(1); mgr_busy[i] = dispc_go_busy(i);
/* keep running as long as there are busy managers, so that /* keep running as long as there are busy managers, so that
* we can collect overlay-applied information */ * we can collect overlay-applied information */
...@@ -1189,9 +1198,12 @@ static void dss_apply_irq_handler(void *data, u32 mask) ...@@ -1189,9 +1198,12 @@ static void dss_apply_irq_handler(void *data, u32 mask)
goto end; goto end;
} }
omap_dispc_unregister_isr(dss_apply_irq_handler, NULL, irq_mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
DISPC_IRQ_EVSYNC_EVEN); if (dss_has_feature(FEAT_MGR_LCD2))
irq_mask |= DISPC_IRQ_VSYNC2;
omap_dispc_unregister_isr(dss_apply_irq_handler, NULL, irq_mask);
dss_cache.irq_enabled = false; dss_cache.irq_enabled = false;
end: end:
...@@ -1265,6 +1277,7 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) ...@@ -1265,6 +1277,7 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
oc->out_width = ovl->info.out_width; oc->out_width = ovl->info.out_width;
oc->out_height = ovl->info.out_height; oc->out_height = ovl->info.out_height;
oc->global_alpha = ovl->info.global_alpha; oc->global_alpha = ovl->info.global_alpha;
oc->pre_mult_alpha = ovl->info.pre_mult_alpha;
oc->replication = oc->replication =
dss_use_replication(dssdev, ovl->info.color_mode); dss_use_replication(dssdev, ovl->info.color_mode);
...@@ -1383,9 +1396,14 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr) ...@@ -1383,9 +1396,14 @@ static int omap_dss_mgr_apply(struct omap_overlay_manager *mgr)
r = 0; r = 0;
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
if (!dss_cache.irq_enabled) { if (!dss_cache.irq_enabled) {
r = omap_dispc_register_isr(dss_apply_irq_handler, NULL, u32 mask;
DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
DISPC_IRQ_EVSYNC_EVEN); mask = DISPC_IRQ_VSYNC | DISPC_IRQ_EVSYNC_ODD |
DISPC_IRQ_EVSYNC_EVEN;
if (dss_has_feature(FEAT_MGR_LCD2))
mask |= DISPC_IRQ_VSYNC2;
r = omap_dispc_register_isr(dss_apply_irq_handler, NULL, mask);
dss_cache.irq_enabled = true; dss_cache.irq_enabled = true;
} }
configure_dispc(); configure_dispc();
...@@ -1477,6 +1495,10 @@ int dss_init_overlay_managers(struct platform_device *pdev) ...@@ -1477,6 +1495,10 @@ int dss_init_overlay_managers(struct platform_device *pdev)
mgr->name = "tv"; mgr->name = "tv";
mgr->id = OMAP_DSS_CHANNEL_DIGIT; mgr->id = OMAP_DSS_CHANNEL_DIGIT;
break; break;
case 2:
mgr->name = "lcd2";
mgr->id = OMAP_DSS_CHANNEL_LCD2;
break;
} }
mgr->set_device = &omap_dss_set_device; mgr->set_device = &omap_dss_set_device;
......
...@@ -257,6 +257,43 @@ static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl, ...@@ -257,6 +257,43 @@ static ssize_t overlay_global_alpha_store(struct omap_overlay *ovl,
return size; return size;
} }
static ssize_t overlay_pre_mult_alpha_show(struct omap_overlay *ovl,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n",
ovl->info.pre_mult_alpha);
}
static ssize_t overlay_pre_mult_alpha_store(struct omap_overlay *ovl,
const char *buf, size_t size)
{
int r;
struct omap_overlay_info info;
ovl->get_overlay_info(ovl, &info);
/* only GFX and Video2 plane support pre alpha multiplied
* set zero for Video1 plane
*/
if (!dss_has_feature(FEAT_GLOBAL_ALPHA_VID1) &&
ovl->id == OMAP_DSS_VIDEO1)
info.pre_mult_alpha = 0;
else
info.pre_mult_alpha = simple_strtoul(buf, NULL, 10);
r = ovl->set_overlay_info(ovl, &info);
if (r)
return r;
if (ovl->manager) {
r = ovl->manager->apply(ovl->manager);
if (r)
return r;
}
return size;
}
struct overlay_attribute { struct overlay_attribute {
struct attribute attr; struct attribute attr;
ssize_t (*show)(struct omap_overlay *, char *); ssize_t (*show)(struct omap_overlay *, char *);
...@@ -280,6 +317,9 @@ static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR, ...@@ -280,6 +317,9 @@ static OVERLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
overlay_enabled_show, overlay_enabled_store); overlay_enabled_show, overlay_enabled_store);
static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR, static OVERLAY_ATTR(global_alpha, S_IRUGO|S_IWUSR,
overlay_global_alpha_show, overlay_global_alpha_store); overlay_global_alpha_show, overlay_global_alpha_store);
static OVERLAY_ATTR(pre_mult_alpha, S_IRUGO|S_IWUSR,
overlay_pre_mult_alpha_show,
overlay_pre_mult_alpha_store);
static struct attribute *overlay_sysfs_attrs[] = { static struct attribute *overlay_sysfs_attrs[] = {
&overlay_attr_name.attr, &overlay_attr_name.attr,
...@@ -290,6 +330,7 @@ static struct attribute *overlay_sysfs_attrs[] = { ...@@ -290,6 +330,7 @@ static struct attribute *overlay_sysfs_attrs[] = {
&overlay_attr_output_size.attr, &overlay_attr_output_size.attr,
&overlay_attr_enabled.attr, &overlay_attr_enabled.attr,
&overlay_attr_global_alpha.attr, &overlay_attr_global_alpha.attr,
&overlay_attr_pre_mult_alpha.attr,
NULL NULL
}; };
...@@ -623,12 +664,22 @@ void dss_recheck_connections(struct omap_dss_device *dssdev, bool force) ...@@ -623,12 +664,22 @@ void dss_recheck_connections(struct omap_dss_device *dssdev, bool force)
int i; int i;
struct omap_overlay_manager *lcd_mgr; struct omap_overlay_manager *lcd_mgr;
struct omap_overlay_manager *tv_mgr; struct omap_overlay_manager *tv_mgr;
struct omap_overlay_manager *lcd2_mgr = NULL;
struct omap_overlay_manager *mgr = NULL; struct omap_overlay_manager *mgr = NULL;
lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD); lcd_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD);
tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV); tv_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_TV);
if (dss_has_feature(FEAT_MGR_LCD2))
if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) { lcd2_mgr = omap_dss_get_overlay_manager(OMAP_DSS_OVL_MGR_LCD2);
if (dssdev->channel == OMAP_DSS_CHANNEL_LCD2) {
if (!lcd2_mgr->device || force) {
if (lcd2_mgr->device)
lcd2_mgr->unset_device(lcd2_mgr);
lcd2_mgr->set_device(lcd2_mgr, dssdev);
mgr = lcd2_mgr;
}
} else if (dssdev->type != OMAP_DISPLAY_TYPE_VENC) {
if (!lcd_mgr->device || force) { if (!lcd_mgr->device || force) {
if (lcd_mgr->device) if (lcd_mgr->device)
lcd_mgr->unset_device(lcd_mgr); lcd_mgr->unset_device(lcd_mgr);
......
...@@ -301,8 +301,8 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, ...@@ -301,8 +301,8 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
} }
EXPORT_SYMBOL(omap_rfbi_write_pixels); EXPORT_SYMBOL(omap_rfbi_write_pixels);
void rfbi_transfer_area(u16 width, u16 height, void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width,
void (callback)(void *data), void *data) u16 height, void (*callback)(void *data), void *data)
{ {
u32 l; u32 l;
...@@ -311,9 +311,9 @@ void rfbi_transfer_area(u16 width, u16 height, ...@@ -311,9 +311,9 @@ void rfbi_transfer_area(u16 width, u16 height,
DSSDBG("rfbi_transfer_area %dx%d\n", width, height); DSSDBG("rfbi_transfer_area %dx%d\n", width, height);
dispc_set_lcd_size(width, height); dispc_set_lcd_size(dssdev->manager->id, width, height);
dispc_enable_channel(OMAP_DSS_CHANNEL_LCD, true); dispc_enable_channel(dssdev->manager->id, true);
rfbi.framedone_callback = callback; rfbi.framedone_callback = callback;
rfbi.framedone_callback_data = data; rfbi.framedone_callback_data = data;
...@@ -887,7 +887,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev, ...@@ -887,7 +887,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
dss_setup_partial_planes(dssdev, x, y, w, h, true); dss_setup_partial_planes(dssdev, x, y, w, h, true);
dispc_set_lcd_size(*w, *h); dispc_set_lcd_size(dssdev->manager->id, *w, *h);
} }
return 0; return 0;
...@@ -899,7 +899,7 @@ int omap_rfbi_update(struct omap_dss_device *dssdev, ...@@ -899,7 +899,7 @@ int omap_rfbi_update(struct omap_dss_device *dssdev,
void (*callback)(void *), void *data) void (*callback)(void *), void *data)
{ {
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
rfbi_transfer_area(w, h, callback, data); rfbi_transfer_area(dssdev, w, h, callback, data);
} else { } else {
struct omap_overlay *ovl; struct omap_overlay *ovl;
void __iomem *addr; void __iomem *addr;
...@@ -1018,11 +1018,13 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev) ...@@ -1018,11 +1018,13 @@ int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev)
goto err1; goto err1;
} }
dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); dispc_set_lcd_display_type(dssdev->manager->id,
OMAP_DSS_LCD_DISPLAY_TFT);
dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_RFBI); dispc_set_parallel_interface_mode(dssdev->manager->id,
OMAP_DSS_PARALLELMODE_RFBI);
dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); dispc_set_tft_data_lines(dssdev->manager->id, dssdev->ctrl.pixel_size);
rfbi_configure(dssdev->phy.rfbi.channel, rfbi_configure(dssdev->phy.rfbi.channel,
dssdev->ctrl.pixel_size, dssdev->ctrl.pixel_size,
......
...@@ -35,12 +35,16 @@ static struct { ...@@ -35,12 +35,16 @@ static struct {
struct regulator *vdds_sdi_reg; struct regulator *vdds_sdi_reg;
} sdi; } sdi;
static void sdi_basic_init(void) static void sdi_basic_init(struct omap_dss_device *dssdev)
{ {
dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_BYPASS); dispc_set_parallel_interface_mode(dssdev->manager->id,
OMAP_DSS_PARALLELMODE_BYPASS);
dispc_set_lcd_display_type(dssdev->manager->id,
OMAP_DSS_LCD_DISPLAY_TFT);
dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); dispc_set_tft_data_lines(dssdev->manager->id, 24);
dispc_set_tft_data_lines(24);
dispc_lcd_enable_signal_polarity(1); dispc_lcd_enable_signal_polarity(1);
} }
...@@ -68,20 +72,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev) ...@@ -68,20 +72,20 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
if (!sdi.skip_init) if (!sdi.skip_init)
dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1);
sdi_basic_init(); sdi_basic_init(dssdev);
/* 15.5.9.1.2 */ /* 15.5.9.1.2 */
dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF; dssdev->panel.config |= OMAP_DSS_LCD_RF | OMAP_DSS_LCD_ONOFF;
dispc_set_pol_freq(dssdev->panel.config, dssdev->panel.acbi, dispc_set_pol_freq(dssdev->manager->id, dssdev->panel.config,
dssdev->panel.acb); dssdev->panel.acbi, dssdev->panel.acb);
if (!sdi.skip_init) { if (!sdi.skip_init) {
r = dss_calc_clock_div(1, t->pixel_clock * 1000, r = dss_calc_clock_div(1, t->pixel_clock * 1000,
&dss_cinfo, &dispc_cinfo); &dss_cinfo, &dispc_cinfo);
} else { } else {
r = dss_get_clock_div(&dss_cinfo); r = dss_get_clock_div(&dss_cinfo);
r = dispc_get_clock_div(&dispc_cinfo); r = dispc_get_clock_div(dssdev->manager->id, &dispc_cinfo);
} }
if (r) if (r)
...@@ -102,13 +106,13 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev) ...@@ -102,13 +106,13 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
} }
dispc_set_lcd_timings(t); dispc_set_lcd_timings(dssdev->manager->id, t);
r = dss_set_clock_div(&dss_cinfo); r = dss_set_clock_div(&dss_cinfo);
if (r) if (r)
goto err2; goto err2;
r = dispc_set_clock_div(&dispc_cinfo); r = dispc_set_clock_div(dssdev->manager->id, &dispc_cinfo);
if (r) if (r)
goto err2; goto err2;
......
...@@ -2132,8 +2132,9 @@ static int omapfb_parse_def_modes(struct omapfb2_device *fbdev) ...@@ -2132,8 +2132,9 @@ static int omapfb_parse_def_modes(struct omapfb2_device *fbdev)
char *str, *options, *this_opt; char *str, *options, *this_opt;
int r = 0; int r = 0;
str = kmalloc(strlen(def_mode) + 1, GFP_KERNEL); str = kstrdup(def_mode, GFP_KERNEL);
strcpy(str, def_mode); if (!str)
return -ENOMEM;
options = str; options = str;
while (!r && (this_opt = strsep(&options, ",")) != NULL) { while (!r && (this_opt = strsep(&options, ",")) != NULL) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment