Commit e9b2aefa authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'amlogic-fixes' of...

Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes

Pull "Amlogic fixes for v4.10" from Kevin Hilman:

- DT: GXL: fix GPIO include
- add DT and defconfig for newly merged DRM driver

This pull has one real fix, as a couple non-critical ones.  The DRM
DT/defconfig patches are coming now because I didn't expect the new
driver to make it for the v4.10 merge window, but since it did[1], the
DT and defconfig should go into the same release.

[1] bbbe775e drm: Add support for Amlogic Meson Graphic Controller

* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: defconfig: enable DRM_MESON as module
  ARM64: dts: meson-gx: Add Graphic Controller nodes
  ARM64: dts: meson-gxl: fix GPIO include
parents 5c6ec6a0 fcdaf1a2
......@@ -356,5 +356,21 @@ sd_emmc_c: mmc@74000 {
status = "disabled";
};
};
vpu: vpu@d0100000 {
compatible = "amlogic,meson-gx-vpu";
reg = <0x0 0xd0100000 0x0 0x100000>,
<0x0 0xc883c000 0x0 0x1000>,
<0x0 0xc8838000 0x0 0x1000>;
reg-names = "vpu", "hhi", "dmc";
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
/* CVBS VDAC output port */
cvbs_vdac_port: port@0 {
reg = <0>;
};
};
};
};
......@@ -142,6 +142,16 @@ sdio_pwrseq: sdio-pwrseq {
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
&uart_AO {
......@@ -229,3 +239,9 @@ &pwm_ef {
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
......@@ -125,6 +125,16 @@ sdio_pwrseq: sdio-pwrseq {
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
/* This UART is brought out to the DB9 connector */
......@@ -234,3 +244,9 @@ &pwm_ef {
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
......@@ -506,3 +506,7 @@ &sd_emmc_c {
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
......@@ -117,6 +117,16 @@ sdio_pwrseq: sdio-pwrseq {
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
&uart_AO {
......@@ -203,3 +213,9 @@ &pwm_ef {
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
......@@ -43,7 +43,7 @@
#include "meson-gx.dtsi"
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/gpio/meson-gxl-gpio.h>
/ {
compatible = "amlogic,meson-gxl";
......@@ -299,3 +299,7 @@ &sd_emmc_c {
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
};
&vpu {
compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
};
......@@ -90,6 +90,16 @@ emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
};
/* This UART is brought out to the DB9 connector */
......@@ -167,3 +177,9 @@ external_phy: ethernet-phy@0 {
max-speed = <1000>;
};
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
......@@ -112,3 +112,7 @@ cpu7: cpu@103 {
};
};
};
&vpu {
compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
};
......@@ -331,6 +331,7 @@ CONFIG_DRM_VC4=m
CONFIG_DRM_PANEL_SIMPLE=m
CONFIG_DRM_I2C_ADV7511=m
CONFIG_DRM_HISI_KIRIN=m
CONFIG_DRM_MESON=m
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_BACKLIGHT_GENERIC=m
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment