Commit e9c78319 authored by Mathieu Poirier's avatar Mathieu Poirier

Merge tag 'rcar_rst_rproc-tag1' of...

Merge tag 'rcar_rst_rproc-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into rproc-next

Renesas R-Car Reset Controller remoteproc API

Definition of rcar_rst_set_rproc_boot_addr(), to be consumed by the
Renesas R-Car Gen3 remote processor driver.
Signed-off-by: default avatarMathieu Poirier <mathieu.poirier@linaro.org>
parents 8f86e695 4c7924fb
......@@ -13,15 +13,43 @@
#define WDTRSTCR_RESET 0xA55A0002
#define WDTRSTCR 0x0054
#define CR7BAR 0x0070
#define CR7BAREN BIT(4)
#define CR7BAR_MASK 0xFFFC0000
static void __iomem *rcar_rst_base;
static u32 saved_mode __initdata;
static int (*rcar_rst_set_rproc_boot_addr_func)(u64 boot_addr);
static int rcar_rst_enable_wdt_reset(void __iomem *base)
{
iowrite32(WDTRSTCR_RESET, base + WDTRSTCR);
return 0;
}
/*
* Most of the R-Car Gen3 SoCs have an ARM Realtime Core.
* Firmware boot address has to be set in CR7BAR before
* starting the realtime core.
* Boot address must be aligned on a 256k boundary.
*/
static int rcar_rst_set_gen3_rproc_boot_addr(u64 boot_addr)
{
if (boot_addr & ~(u64)CR7BAR_MASK) {
pr_err("Invalid boot address got %llx\n", boot_addr);
return -EINVAL;
}
iowrite32(boot_addr, rcar_rst_base + CR7BAR);
iowrite32(boot_addr | CR7BAREN, rcar_rst_base + CR7BAR);
return 0;
}
struct rst_config {
unsigned int modemr; /* Mode Monitoring Register Offset */
int (*configure)(void __iomem *base); /* Platform specific config */
int (*set_rproc_boot_addr)(u64 boot_addr);
};
static const struct rst_config rcar_rst_gen1 __initconst = {
......@@ -35,6 +63,7 @@ static const struct rst_config rcar_rst_gen2 __initconst = {
static const struct rst_config rcar_rst_gen3 __initconst = {
.modemr = 0x60,
.set_rproc_boot_addr = rcar_rst_set_gen3_rproc_boot_addr,
};
static const struct rst_config rcar_rst_r8a779a0 __initconst = {
......@@ -76,9 +105,6 @@ static const struct of_device_id rcar_rst_matches[] __initconst = {
{ /* sentinel */ }
};
static void __iomem *rcar_rst_base __initdata;
static u32 saved_mode __initdata;
static int __init rcar_rst_init(void)
{
const struct of_device_id *match;
......@@ -100,6 +126,8 @@ static int __init rcar_rst_init(void)
rcar_rst_base = base;
cfg = match->data;
rcar_rst_set_rproc_boot_addr_func = cfg->set_rproc_boot_addr;
saved_mode = ioread32(base + cfg->modemr);
if (cfg->configure) {
error = cfg->configure(base);
......@@ -130,3 +158,12 @@ int __init rcar_rst_read_mode_pins(u32 *mode)
*mode = saved_mode;
return 0;
}
int rcar_rst_set_rproc_boot_addr(u64 boot_addr)
{
if (!rcar_rst_set_rproc_boot_addr_func)
return -EIO;
return rcar_rst_set_rproc_boot_addr_func(boot_addr);
}
EXPORT_SYMBOL_GPL(rcar_rst_set_rproc_boot_addr);
......@@ -4,8 +4,10 @@
#ifdef CONFIG_RST_RCAR
int rcar_rst_read_mode_pins(u32 *mode);
int rcar_rst_set_rproc_boot_addr(u64 boot_addr);
#else
static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; }
static inline int rcar_rst_set_rproc_boot_addr(u64 boot_addr) { return -ENODEV; }
#endif
#endif /* __LINUX_SOC_RENESAS_RCAR_RST_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment