Commit e9d3009c authored by Bart Van Assche's avatar Bart Van Assche Committed by Martin K. Petersen

scsi: target: iscsi: Wait for all commands to finish before freeing a session

The iSCSI target driver is the only target driver that does not wait for
ongoing commands to finish before freeing a session. Make the iSCSI target
driver wait for ongoing commands to finish before freeing a session. This
patch fixes the following KASAN complaint:

BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710
Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247

CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: target_completion target_complete_ok_work [target_core_mod]
Call Trace:
 dump_stack+0x8a/0xd6
 print_address_description.constprop.0+0x40/0x60
 __kasan_report.cold+0x1b/0x33
 kasan_report+0x16/0x20
 __asan_load8+0x58/0x90
 __lock_acquire+0xb1a/0x2710
 lock_acquire+0xd3/0x200
 _raw_spin_lock_irqsave+0x43/0x60
 target_release_cmd_kref+0x162/0x7f0 [target_core_mod]
 target_put_sess_cmd+0x2e/0x40 [target_core_mod]
 lio_check_stop_free+0x12/0x20 [iscsi_target_mod]
 transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod]
 target_complete_ok_work+0x1b0/0x790 [target_core_mod]
 process_one_work+0x549/0xa40
 worker_thread+0x7a/0x5d0
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Allocated by task 889:
 save_stack+0x23/0x90
 __kasan_kmalloc.constprop.0+0xcf/0xe0
 kasan_slab_alloc+0x12/0x20
 kmem_cache_alloc+0xf6/0x360
 transport_alloc_session+0x29/0x80 [target_core_mod]
 iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

Freed by task 1025:
 save_stack+0x23/0x90
 __kasan_slab_free+0x13a/0x190
 kasan_slab_free+0x12/0x20
 kmem_cache_free+0x146/0x400
 transport_free_session+0x179/0x2f0 [target_core_mod]
 transport_deregister_session+0x130/0x180 [target_core_mod]
 iscsit_close_session+0x12c/0x350 [iscsi_target_mod]
 iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod]
 iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod]
 iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod]
 kthread+0x1bc/0x210
 ret_from_fork+0x24/0x30

The buggy address belongs to the object at ffff8881154ec9c0
 which belongs to the cache se_sess_cache of size 352
The buggy address is located 176 bytes inside of
 352-byte region [ffff8881154ec9c0, ffff8881154ecb20)
The buggy address belongs to the page:
page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0
flags: 0x2fff000000010200(slab|head)
raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400
raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                             ^
 ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc

Cc: Mike Christie <mchristi@redhat.com>
Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.orgReviewed-by: default avatarRoman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: default avatarBart Van Assche <bvanassche@acm.org>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 80647a89
......@@ -1165,7 +1165,9 @@ int iscsit_setup_scsi_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
hdr->cmdsn, be32_to_cpu(hdr->data_length), payload_length,
conn->cid);
target_get_sess_cmd(&cmd->se_cmd, true);
if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
return iscsit_add_reject_cmd(cmd,
ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
cmd->sense_reason = transport_lookup_cmd_lun(&cmd->se_cmd,
scsilun_to_int(&hdr->lun));
......@@ -2002,7 +2004,9 @@ iscsit_handle_task_mgt_cmd(struct iscsi_conn *conn, struct iscsi_cmd *cmd,
conn->sess->se_sess, 0, DMA_NONE,
TCM_SIMPLE_TAG, cmd->sense_buffer + 2);
target_get_sess_cmd(&cmd->se_cmd, true);
if (target_get_sess_cmd(&cmd->se_cmd, true) < 0)
return iscsit_add_reject_cmd(cmd,
ISCSI_REASON_WAITING_FOR_LOGOUT, buf);
/*
* TASK_REASSIGN for ERL=2 / connection stays inside of
......@@ -4230,6 +4234,8 @@ int iscsit_close_connection(
* must wait until they have completed.
*/
iscsit_check_conn_usage_count(conn);
target_sess_cmd_list_set_waiting(sess->se_sess);
target_wait_for_sess_cmds(sess->se_sess);
ahash_request_free(conn->conn_tx_hash);
if (conn->conn_rx_hash) {
......
......@@ -627,6 +627,7 @@ struct iscsi_reject {
#define ISCSI_REASON_BOOKMARK_INVALID 9
#define ISCSI_REASON_BOOKMARK_NO_RESOURCES 10
#define ISCSI_REASON_NEGOTIATION_RESET 11
#define ISCSI_REASON_WAITING_FOR_LOGOUT 12
/* Max. number of Key=Value pairs in a text message */
#define MAX_KEY_VALUE_PAIRS 8192
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment