Skip to content

L
linux
Commit ea1432c7 authored by Russell King's avatar Russell King
Browse files
Options

[ARM] Move machine config questions into machine class subdirs 

This cset moves a fair amount of per-machine questions into their
relevant machine class subdirectory, making arch/arm/config.in
easier on the eyes.
parent 4150d4ca
Hide whitespace changes
Inline Side-by-side
Showing with 498 additions and 485 deletions
arch/arm/Config.help
View file @ ea1432c7
...@@ -453,24 +453,6 @@ CONFIG_MAGIC_SYSRQ ...@@ -453,24 +453,6 @@ CONFIG_MAGIC_SYSRQ
keys are documented in <file:Documentation/sysrq.txt>. Don't say Y keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
unless you really know what this hack does. unless you really know what this hack does.
CONFIG_ARCH_ARCA5K
This selects what ARM system you wish to build the kernel for. It
also selects to some extent the CPU type. If you are unsure what
to set this option to, please consult any information supplied with
your system.
CONFIG_ARCH_A5K
Say Y here to to support the Acorn A5000. Linux can support the
internal IDE disk and CD-ROM interface, serial and parallel port,
and the floppy drive. Note that on some A5000s the floppy is
plugged into the wrong socket on the motherboard.
CONFIG_ARCH_ARC
The Acorn Archimedes was an personal computer based on an 8K ARM2
processor, released in 1987. It supported 512K of RAM and 2 800K
floppy disks. Picture and more detailed specifications at
<http://www.computingmuseum.com/museum/archi.htm>.
CONFIG_ARCH_EBSA110 CONFIG_ARCH_EBSA110
This is an evaluation board for the StrongARM processor available This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an onboard from Digital. It has limited hardware on-board, including an onboard
...@@ -481,32 +463,6 @@ CONFIG_ARCH_RPC ...@@ -481,32 +463,6 @@ CONFIG_ARCH_RPC
On the Acorn Risc-PC, Linux can support the internal IDE disk and On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive. CD-ROM interface, serial and parallel port, and the floppy drive.
CONFIG_PAGESIZE_16
Say Y here if your Archimedes or A5000 system has only 2MB of
memory, otherwise say N. The resulting kernel will not run on a
machine with 4MB of memory.
CONFIG_ARCH_CATS
Say Y here if you intend to run this kernel on the CATS.
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_EBSA285_ADDIN
Say Y here if you intend to run this kernel on the EBSA285 card
in addin mode.
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_EBSA285_HOST
Say Y here if you intend to run this kernel on the EBSA285 card
in host ("central function") mode.
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_IQ80310
Say Y here if you want to run your kernel on the Intel IQ80310
evaluation kit for the IOP310 chipset.
CONFIG_ARCH_L7200 CONFIG_ARCH_L7200
Say Y here if you intend to run this kernel on a LinkUp Systems Say Y here if you intend to run this kernel on a LinkUp Systems
L7200 Software Development Board which uses an ARM720T processor. L7200 Software Development Board which uses an ARM720T processor.
...@@ -517,128 +473,6 @@ CONFIG_ARCH_L7200 ...@@ -517,128 +473,6 @@ CONFIG_ARCH_L7200
If you have any questions or comments about the Linux kernel port If you have any questions or comments about the Linux kernel port
to this board, send e-mail to sjhill@cotw.com. to this board, send e-mail to sjhill@cotw.com.
CONFIG_ARCH_NETWINDER
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
<http://www.netwinder.org/>
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_P720T
Say Y here if you intend to run this kernel on the ARM Prospector
720T.
CONFIG_ARCH_PERSONAL_SERVER
Say Y here if you intend to run this kernel on the Compaq
Personal Server.
Saying N will reduce the size of the Footbridge kernel.
The Compaq Personal Server is not available for purchase.
There are no product plans beyond the current research
prototypes at this time. Information is available at:
<http://crl.research.compaq.com/projects/personalserver/>
If you have any questions or comments about the Compaq Personal
Server, send e-mail to skiff@crl.dec.com.
CONFIG_PLD_HOTSWAP
This enables support for the dynamic loading and configuration of
compatible drivers when the contents of the PLD are changed. This
is still experimental and requires configuration tools which are
not yet generally available. Say N here. You must enable the kernel
module loader for this feature to work.
CONFIG_SA1100_ASSABET
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
CONFIG_ASSABET_NEPONSET
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (Assabet) with the SA-1111
Development Board (Nepon).
CONFIG_SA1100_BADGE4
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
CONFIG_SA1100_BRUTUS
Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
Microprocessor Development Board (also known as the Brutus).
CONFIG_SA1100_CERF
The Intrinsyc CerfBoard is based on the StrongARM 1110.
More information is available at:
<http://www.intrinsyc.com/products/referenceplatforms/cerfboard.html>.
Say Y if configuring for an Intrinsyc CerfBoard.
Say N otherwise.
CONFIG_SA1100_FLEXANET
Say Y here if you intend to run this kernel on the FlexaNet
handheld instruments. Information about this machine can be
found at: <http://www.flexanet.com/>.
CONFIG_SA1100_GRAPHICSCLIENT
Say Y here if you are using an Applied Data Systems Intel(R)
StrongARM(R) SA-1100 based Graphics Client SBC. See
<http://www.flatpanels.com/> for information on this system.
CONFIG_SA1100_H3600
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
<http://www.compaq.com/products/handhelds/pocketpc/>
CONFIG_SA1100_LART
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lart.tudelft.nl/> for
information on the LART.
CONFIG_SA1100_NANOENGINE
The nanoEngine is a StrongARM 1110-based single board computer
from Bright Star Engineering. More information is available at:
<http://www.brightstareng.com/arm/nanoeng.htm>.
Say Y if configuring for a nanoEngine.
Say N otherwise.
CONFIG_SA1100_PANGOLIN
Pangolin is a StrongARM 1110-based evaluation platform produced
by Dialogue Technology. It has EISA slots for ease of configuration
with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash
card, and TFT-LCD card.
Say Y if configuring for a Pangolin.
Say N otherwise.
CONFIG_SA1100_PFS168
The Radisys Corp. PFS-168 (aka Tulsa) is an Intel® StrongArm® SA-1110 based
computer which includes the SA-1111 Microprocessor Companion Chip and other
custom I/O designed to add connectivity and multimedia features for vending
and business machine applications. Say Y here if you require support for
this target.
CONFIG_SA1100_SHANNON
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
and a telco interface.
CONFIG_SA1100_STORK
Say Y here if you intend to run this kernel on the Stork
handheld computer.
CONFIG_SA1100_VICTOR
Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
SA-1100 based Victor Digital Talking Book Reader. See
<http://www.visuaide.com/pagevictor.en.html> for information on
this system.
CONFIG_CPU_ARM610 CONFIG_CPU_ARM610
The ARM610 is the successor to the ARM3 processor The ARM610 is the successor to the ARM3 processor
and was produced by VLSI Technology Inc. and was produced by VLSI Technology Inc.
...@@ -858,89 +692,6 @@ CONFIG_CPU_FREQ ...@@ -858,89 +692,6 @@ CONFIG_CPU_FREQ
written) to implement the policy. If you don't understand what this written) to implement the policy. If you don't understand what this
is all about, it's safe to say 'N'. is all about, it's safe to say 'N'.
CONFIG_ARCH_EDB7211
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board.
CONFIG_SA1100_H3100
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
<http://www.compaq.com/products/handhelds/pocketpc/>
CONFIG_SA1100_H3800
Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
series handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
<http://www.compaq.com/products/handhelds/pocketpc/>
CONFIG_H3600_SLEEVE
Choose this option to enable support for extension packs (sleeves)
for the Compaq iPAQ H3XXX series of handheld computers. This option
is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
packs.
CONFIG_SA1100_GRAPHICSMASTER
Say Y here if you are using an Applied Data Systems Intel(R)
StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111
StrongARM companion chip. See
<http://www.applieddata.net/products_masterSpec.asp> for information
on this system.
CONFIG_SA1100_ADSBITSY
Say Y here if you are using Applied Data Systems Intel(R)
StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ -
like platform. See
<http://www.applieddata.net/products_bitsySpec.asp> for more
information.
CONFIG_SA1100_ITSY
Say Y here if you are using the Compaq Itsy experimental pocket
computer. See <http://research.compaq.com/wrl/projects/itsy/> for
more information.
CONFIG_SA1100_HUW_WEBPANEL
Say Y here to support the HuW Webpanel produced by Hoeft & Wessel
AG. English-language website is at
<http://www.hoeft-wessel.de/en.htm>; credits and build instructions
at Documentation/arm/SA1100/HUW_WEBPANEL.
CONFIG_SA1100_PLEB
Say Y here if you are using a Portable Linux Embedded Board
(also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/>
for more information.
CONFIG_SA1100_SHERMAN
Say Y here to support the Blazie Engineering `Sherman' StrongARM
1110-based SBC, used primarily in assistance products for the
visually impaired. The company is now Freedom Scientific, with
a website at <http://www.freedomscientific.com/index.html>. The
Sherman product, however, appears to have been discontinued.
CONFIG_SA1100_YOPY
Say Y here to support the Yopy PDA. Product information at
<http://www.yopy.com/>. See Documentation/arm/SA110/Yopy
for more.
CONFIG_SA1100_CERF_CPLD
Say Y here to support the Linux CerfPDA development kit from
Intrinsyc. This is a StrongARM-1110-based reference platform for
designing custom PDAs. Product info is at
<http://www.intrinsyc.com/products/referencedesigns/cerfpda.asp>.
CONFIG_SA1100_FREEBIRD
Support the FreeBird board used in Coventive embedded products. See
Documentation/arm/SA1100/Freebird for more.
CONFIG_SA1100_PT_SYSTEM3
Say Y here if you intend to build a kernel suitable to run on
a Pruftechnik Digital Board. For more information see
<http://www.pruftechnik.com>
CONFIG_CPU_ARM926T CONFIG_CPU_ARM926T
This is a variant of the ARM920. It has slightly different This is a variant of the ARM920. It has slightly different
instruction sequences for cache and TLB operations. Curiously, instruction sequences for cache and TLB operations. Curiously,
...@@ -949,40 +700,3 @@ CONFIG_CPU_ARM926T ...@@ -949,40 +700,3 @@ CONFIG_CPU_ARM926T
Say Y if you want support for the ARM926T processor. Say Y if you want support for the ARM926T processor.
Otherwise, say N. Otherwise, say N.
CONFIG_SA1100_JORNADA720
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See <http://www.hp.com/jornada/products/720>
for details.
CONFIG_SA1100_OMNIMETER
Say Y here if you are using the inhand electronics OmniMeter. See
<http://www.inhandelectronics.com/html/omni1.html> for details.
CONFIG_SA1100_SIMPAD
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
like CL4 in additional it has a PCMCIA-Slot. For more information
visit <http://www.my-siemens.com or www.siemens.ch>.
CONFIG_ARCH_CDB89712
This is an evaluation board from Cirrus for the CS89712 processor.
The board includes 2 serial ports, Ethernet, IRDA, and expansion
headers. It comes with 16 MB SDRAM and 8 MB flash ROM.
CONFIG_ARCH_AUTCPU12
Say Y if you intend to run the kernel on the autronix autcpu12
board. This board is based on a Cirrus Logic CS89712.
CONFIG_EP72XX_ROM_BOOT
If you say Y here, your CLPS711x-based kernel will use the bootstrap
mode memory map instead of the normal memory map.
Processors derived from the Cirrus CLPS-711X core support two boot
modes. Normal mode boots from the external memory device at CS0.
Bootstrap mode rearranges parts of the memory map, placing an
internal 128 byte bootstrap ROM at CS0. This option performs the
address map changes required to support booting in this mode.
You almost surely want to say N here.
arch/arm/config.in
View file @ ea1432c7
...@@ -37,142 +37,13 @@ choice 'ARM system type' \ ...@@ -37,142 +37,13 @@ choice 'ARM system type' \
SA1100-based CONFIG_ARCH_SA1100 \ SA1100-based CONFIG_ARCH_SA1100 \
Shark CONFIG_ARCH_SHARK" RiscPC Shark CONFIG_ARCH_SHARK" RiscPC
mainmenu_option next_comment source arch/arm/mach-arc/Config.in
comment 'Archimedes/A5000 Implementations' source arch/arm/mach-clps711x/Config.in
# These architectures will be combined. However, until this source arch/arm/mach-epxa10db/Config.in
# is complete... Note that the ARC will take precedence over source arch/arm/mach-footbridge/Config.in
# A5K source arch/arm/mach-iop310/Config.in
comment 'Archimedes/A5000 Implementations (select only ONE)' source arch/arm/mach-pxa/Config.in
dep_bool ' Archimedes' CONFIG_ARCH_ARC $CONFIG_ARCH_ARCA5K source arch/arm/mach-sa1100/Config.in
dep_bool ' A5000' CONFIG_ARCH_A5K $CONFIG_ARCH_ARCA5K
endmenu
mainmenu_option next_comment
comment 'Footbridge Implementations'
dep_bool ' CATS' CONFIG_ARCH_CATS $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' Compaq Personal Server' CONFIG_ARCH_PERSONAL_SERVER $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' EBSA285 (addin mode)' CONFIG_ARCH_EBSA285_ADDIN $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' EBSA285 (host mode)' CONFIG_ARCH_EBSA285_HOST $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' NetWinder' CONFIG_ARCH_NETWINDER $CONFIG_ARCH_FOOTBRIDGE
endmenu
mainmenu_option next_comment
comment 'SA11x0 Implementations'
dep_bool ' Assabet' CONFIG_SA1100_ASSABET $CONFIG_ARCH_SA1100
dep_bool ' Include support for Neponset' CONFIG_ASSABET_NEPONSET $CONFIG_SA1100_ASSABET
dep_bool ' ADS Bitsy' CONFIG_SA1100_ADSBITSY $CONFIG_ARCH_SA1100
dep_bool ' Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
dep_bool ' CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_CERF" = "y" ]; then
choice 'Cerf Flash available' \
"8MB CONFIG_SA1100_CERF_FLASH_8MB \
16MB CONFIG_SA1100_CERF_FLASH_16MB \
32MB CONFIG_SA1100_CERF_FLASH_32MB" 8MB
bool 'Cerf w/CPLD support (CerfPDA)' CONFIG_SA1100_CERF_CPLD
fi
dep_bool ' Compaq iPAQ H3100' CONFIG_SA1100_H3100 $CONFIG_ARCH_SA1100
dep_bool ' Compaq iPAQ H3600/H3700' CONFIG_SA1100_H3600 $CONFIG_ARCH_SA1100
dep_bool ' Compaq iPAQ H3800' CONFIG_SA1100_H3800 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_H3100" = "y" -o "$CONFIG_SA1100_H3600" = "y" -o "$CONFIG_SA1100_H3800" = "y" ]; then
define_bool CONFIG_SA1100_H3XXX y
else
define_bool CONFIG_SA1100_H3XXX n
fi
#dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
dep_bool ' Extenex HandHeld Theater (Squashtail)' CONFIG_SA1100_EXTENEX1 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_EXTENEX1" = "y" ]; then
bool ' Support 16 MB of DRAM (not just 8)' CONFIG_SA1100_EXTENEX1_16MB
fi
dep_bool ' FlexaNet' CONFIG_SA1100_FLEXANET $CONFIG_ARCH_SA1100
dep_bool ' FreeBird-v1.1' CONFIG_SA1100_FREEBIRD $CONFIG_ARCH_SA1100
dep_bool ' GraphicsClient Plus' CONFIG_SA1100_GRAPHICSCLIENT $CONFIG_ARCH_SA1100
dep_bool ' GraphicsMaster' CONFIG_SA1100_GRAPHICSMASTER $CONFIG_ARCH_SA1100
dep_bool ' HP Labs BadgePAD 4' CONFIG_SA1100_BADGE4 $CONFIG_ARCH_SA1100
dep_bool ' HP Jornada 720' CONFIG_SA1100_JORNADA720 $CONFIG_ARCH_SA1100
dep_bool ' HuW WebPanel' CONFIG_SA1100_HUW_WEBPANEL $CONFIG_ARCH_SA1100
dep_bool ' Itsy' CONFIG_SA1100_ITSY $CONFIG_ARCH_SA1100
dep_bool ' LART' CONFIG_SA1100_LART $CONFIG_ARCH_SA1100
dep_bool ' nanoEngine' CONFIG_SA1100_NANOENGINE $CONFIG_ARCH_SA1100
dep_bool ' OmniMeter' CONFIG_SA1100_OMNIMETER $CONFIG_ARCH_SA1100
dep_bool ' Pangolin' CONFIG_SA1100_PANGOLIN $CONFIG_ARCH_SA1100
dep_bool ' PLEB' CONFIG_SA1100_PLEB $CONFIG_ARCH_SA1100
dep_bool ' PT System 3' CONFIG_SA1100_PT_SYSTEM3 $CONFIG_ARCH_SA1100
dep_bool ' Shannon' CONFIG_SA1100_SHANNON $CONFIG_ARCH_SA1100
dep_bool ' Sherman' CONFIG_SA1100_SHERMAN $CONFIG_ARCH_SA1100
dep_bool ' Simpad' CONFIG_SA1100_SIMPAD $CONFIG_ARCH_SA1100
dep_bool ' Tulsa' CONFIG_SA1100_PFS168 $CONFIG_ARCH_SA1100
dep_bool ' Victor' CONFIG_SA1100_VICTOR $CONFIG_ARCH_SA1100
dep_bool ' XP860' CONFIG_SA1100_XP860 $CONFIG_ARCH_SA1100
dep_bool ' Yopy' CONFIG_SA1100_YOPY $CONFIG_ARCH_SA1100
dep_bool ' Stork' CONFIG_SA1100_STORK $CONFIG_ARCH_SA1100
# Determine if SA1111 support is required
if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
"$CONFIG_SA1100_JORNADA720" = "y" -o \
"$CONFIG_SA1100_PFS168" = "y" -o \
"$CONFIG_SA1100_XP860" = "y" -o \
"$CONFIG_SA1100_GRAPHICSMASTER" = "y" -o \
"$CONFIG_SA1100_PT_SYSTEM3" = "y" -o \
"$CONFIG_SA1100_ADSBITSY" = "y" -o \
"$CONFIG_SA1100_BADGE4" = "y" ]; then
define_bool CONFIG_SA1111 y
define_int CONFIG_FORCE_MAX_ZONEORDER 9
fi
dep_tristate 'SA1100 USB function support' CONFIG_SA1100_USB $CONFIG_ARCH_SA1100
dep_tristate ' Support for SA11x0 USB network link function' CONFIG_SA1100_USB_NETLINK $CONFIG_SA1100_USB
dep_tristate ' Support for SA11x0 USB character device emulation' CONFIG_SA1100_USB_CHAR $CONFIG_SA1100_USB
dep_tristate 'Compaq iPAQ Handheld sleeve support' CONFIG_H3600_SLEEVE $CONFIG_SA1100_H3600
endmenu
mainmenu_option next_comment
comment 'Intel PXA250/210 Implementations'
dep_bool ' Intel DBPXA250 Development Platform' CONFIG_ARCH_LUBBOCK $CONFIG_ARCH_PXA
dep_bool ' Accelent Xscale IDP' CONFIG_ARCH_PXA_IDP $CONFIG_ARCH_PXA
if [ "$CONFIG_ARCH_LUBBOCK" = "y" ]; then
define_bool CONFIG_SA1111 y
fi
endmenu
mainmenu_option next_comment
comment 'CLPS711X/EP721X Implementations'
dep_bool ' AUTCPU12' CONFIG_ARCH_AUTCPU12 $CONFIG_ARCH_CLPS711X
dep_bool ' CDB89712' CONFIG_ARCH_CDB89712 $CONFIG_ARCH_CLPS711X
dep_bool ' CLEP7312' CONFIG_ARCH_CLEP7312 $CONFIG_ARCH_CLPS711X
dep_bool ' EDB7211' CONFIG_ARCH_EDB7211 $CONFIG_ARCH_CLPS711X
dep_bool ' P720T' CONFIG_ARCH_P720T $CONFIG_ARCH_CLPS711X
dep_bool ' FORTUNET' CONFIG_ARCH_FORTUNET $CONFIG_ARCH_CLPS711X
# XXX Maybe these should indicate register compatibility
# instead of being mutually exclusive.
if [ "$CONFIG_ARCH_EDB7211" = "y" ]; then
define_bool CONFIG_ARCH_EP7211 y
else
define_bool CONFIG_ARCH_EP7211 n
fi
if [ "$CONFIG_ARCH_P720T" = "y" ]; then
define_bool CONFIG_ARCH_EP7212 y
else
define_bool CONFIG_ARCH_EP7212 n
fi
if [ "$CONFIG_ARCH_EP7211" = "y" -o \
"$CONFIG_ARCH_EP7212" = "y" ]; then
bool ' EP72xx ROM boot' CONFIG_EP72XX_ROM_BOOT
fi
endmenu
mainmenu_option next_comment
comment 'IOP310 Implementation Options'
dep_bool ' IQ80310' CONFIG_ARCH_IQ80310 $CONFIG_ARCH_IOP310
comment 'IOP310 Chipset Features'
dep_bool 'Support Intel 80312 Application Accelerator Unit (EXPERIMENTAL)' CONFIG_IOP310_AAU $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 DMA (EXPERIMENTAL)' CONFIG_IOP310_DMA $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 Messaging Unit (EXPERIMENTAL)' CONFIG_IOP310_MU $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 Performance Monitor (EXPERIMENTAL)' CONFIG_IOP310_PMON $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
endmenu
# Definitions to make life easier # Definitions to make life easier
if [ "$CONFIG_ARCH_ARCA5K" = "y" -o \ if [ "$CONFIG_ARCH_ARCA5K" = "y" -o \
...@@ -182,7 +53,8 @@ else ...@@ -182,7 +53,8 @@ else
define_bool CONFIG_ARCH_ACORN n define_bool CONFIG_ARCH_ACORN n
fi fi
# see Documentation/arm/ConfigVars for a description of these #####################################################################
# Footbridge support
if [ "$CONFIG_ARCH_CO285" = "y" -o \ if [ "$CONFIG_ARCH_CO285" = "y" -o \
"$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then "$CONFIG_ARCH_FOOTBRIDGE" = "y" ]; then
define_bool CONFIG_FOOTBRIDGE y define_bool CONFIG_FOOTBRIDGE y
...@@ -208,44 +80,33 @@ if [ "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \ ...@@ -208,44 +80,33 @@ if [ "$CONFIG_ARCH_EBSA285_HOST" = "y" -o \
define_bool CONFIG_ARCH_EBSA285 y define_bool CONFIG_ARCH_EBSA285 y
fi fi
#####################################################################
# SA1111 support
if [ "$CONFIG_ASSABET_NEPONSET" = "y" -o \
"$CONFIG_SA1100_ADSBITSY" = "y" -o \
"$CONFIG_SA1100_BADGE4" = "y" -o \
"$CONFIG_SA1100_CONSUS" = "y" -o \
"$CONFIG_SA1100_GRAPHICSMASTER" = "y" -o \
"$CONFIG_SA1100_JORNADA720" = "y" -o \
"$CONFIG_ARCH_LUBBOCK" = "y" -o \
"$CONFIG_SA1100_PFS168" = "y" -o \
"$CONFIG_SA1100_PT_SYSTEM3" = "y" -o \
"$CONFIG_SA1100_XP860" = "y" ]; then
define_bool CONFIG_SA1111 y
define_int CONFIG_FORCE_MAX_ZONEORDER 9
fi
comment 'Processor Type'
# Figure out whether this system uses 26-bit or 32-bit CPUs. # Figure out whether this system uses 26-bit or 32-bit CPUs.
if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
define_bool CONFIG_CPU_32 n define_bool CONFIG_CPU_32 n
define_bool CONFIG_CPU_26 y define_bool CONFIG_CPU_26 y
bool '2MB physical memory' CONFIG_PAGESIZE_16
else else
define_bool CONFIG_CPU_32 y define_bool CONFIG_CPU_32 y
define_bool CONFIG_CPU_26 n define_bool CONFIG_CPU_26 n
fi fi
comment 'Processor Type'
# Firstly, figure out what processor architecture version we should be using.
# This defines the compiler instruction set which depends on the machine type.
if [ "$CONFIG_ARCH_RPC" = "y" -o "$CONFIG_ARCH_CLPS7500" = "y" ]; then
define_bool CONFIG_CPU_32v3 y
else
define_bool CONFIG_CPU_32v3 n
fi
if [ "$CONFIG_ARCH_EBSA110" = "y" -o "$CONFIG_FOOTBRIDGE" = "y" -o \
"$CONFIG_ARCH_TBOX" = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_ARCH_L7200" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" -o \
"$CONFIG_ARCH_CAMELOT" = "y" ]; then
define_bool CONFIG_CPU_32v4 y
else
define_bool CONFIG_CPU_32v4 n
fi
if [ "$CONFIG_ARCH_IOP310" = "y" -o \
"$CONFIG_ARCH_ADIFCC" = "y" -o \
"$CONFIG_ARCH_PXA" = "y" ]; then
define_bool CONFIG_CPU_32v5 y
else
define_bool CONFIG_CPU_32v5 n
fi
# Select CPU types depending on the architecture selected. This selects # Select CPU types depending on the architecture selected. This selects
# which CPUs we support in the kernel image, and the compiler instruction # which CPUs we support in the kernel image, and the compiler instruction
# optimiser behaviour. # optimiser behaviour.
...@@ -338,14 +199,30 @@ else ...@@ -338,14 +199,30 @@ else
define_bool CONFIG_CPU_XSCALE n define_bool CONFIG_CPU_XSCALE n
fi fi
#if [ "$CONFIG_CPU_XSCALE" = "y" ]; then # Figure out what processor architecture version we should be using.
# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER # This defines the compiler instruction set which depends on the machine type.
#fi
if [ "$CONFIG_CPU_XSCALE" = "y" -a "$CONFIG_XSCALE_PMU_TIMER" != "y" ]; then if [ "$CONFIG_ARCH_RPC" = "y" -o "$CONFIG_ARCH_CLPS7500" = "y" ]; then
define_bool CONFIG_XSCALE_PMU y define_bool CONFIG_CPU_32v3 y
else else
define_bool CONFIG_XSCALE_PMU n define_bool CONFIG_CPU_32v3 n
fi
if [ "$CONFIG_ARCH_EBSA110" = "y" -o "$CONFIG_FOOTBRIDGE" = "y" -o \
"$CONFIG_ARCH_TBOX" = "y" -o "$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_NEXUSPCI" = "y" -o "$CONFIG_ARCH_CLPS711X" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" -o "$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_ARCH_L7200" = "y" -o "$CONFIG_ARCH_ANAKIN" = "y" -o \
"$CONFIG_ARCH_CAMELOT" = "y" ]; then
define_bool CONFIG_CPU_32v4 y
else
define_bool CONFIG_CPU_32v4 n
fi
if [ "$CONFIG_ARCH_IOP310" = "y" -o \
"$CONFIG_ARCH_ADIFCC" = "y" -o \
"$CONFIG_ARCH_PXA" = "y" ]; then
define_bool CONFIG_CPU_32v5 y
else
define_bool CONFIG_CPU_32v5 n
fi fi
comment 'Processor Features' comment 'Processor Features'
...@@ -372,6 +249,15 @@ if [ "$CONFIG_CPU_ARM1020" = "y" ]; then ...@@ -372,6 +249,15 @@ if [ "$CONFIG_CPU_ARM1020" = "y" ]; then
bool 'Disable branch prediction' CONFIG_CPU_BPREDICT_DISABLE bool 'Disable branch prediction' CONFIG_CPU_BPREDICT_DISABLE
fi fi
if [ "$CONFIG_CPU_XSCALE" = "y" ]; then
# bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
if [ "$CONFIG_XSCALE_PMU_TIMER" != "y" ]; then
define_bool CONFIG_XSCALE_PMU y
else
define_bool CONFIG_XSCALE_PMU n
fi
fi
endmenu endmenu
mainmenu_option next_comment mainmenu_option next_comment
...@@ -494,9 +380,9 @@ if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \ ...@@ -494,9 +380,9 @@ if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" -o \ "$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_CO285" = "y" -o \ "$CONFIG_ARCH_CO285" = "y" -o \
"$CONFIG_ARCH_SA1100" = "y" -o \ "$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_ARCH_LUBBOCK" = "y" -o \ "$CONFIG_ARCH_LUBBOCK" = "y" -o \
"$CONFIG_ARCH_PXA_IDP" = "y" -o \ "$CONFIG_ARCH_PXA_IDP" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" -o \ "$CONFIG_ARCH_INTEGRATOR" = "y" -o \
"$CONFIG_ARCH_P720T" = "y" ]; then "$CONFIG_ARCH_P720T" = "y" ]; then
bool ' Timer LED' CONFIG_LEDS_TIMER bool ' Timer LED' CONFIG_LEDS_TIMER
bool ' CPU usage LED' CONFIG_LEDS_CPU bool ' CPU usage LED' CONFIG_LEDS_CPU
...@@ -601,31 +487,6 @@ source fs/Config.in ...@@ -601,31 +487,6 @@ source fs/Config.in
if [ "$CONFIG_VT" = "y" ]; then if [ "$CONFIG_VT" = "y" ]; then
mainmenu_option next_comment mainmenu_option next_comment
comment 'Console drivers' comment 'Console drivers'
# Select the keyboard type for this architecture.
if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
"$CONFIG_ARCH_CLPS7500" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" ]; then
define_bool CONFIG_PC_KEYB y
fi
if [ "$CONFIG_ARCH_INTEGRATOR" = "y" ]; then
define_bool CONFIG_KMI_KEYB y
define_bool CONFIG_KMI_MOUSE y
fi
if [ "$CONFIG_ARCH_L7200" = "y" ]; then
define_bool CONFIG_L7200_KEYB y
fi
# Do we use the PC-type keyboard map?
if [ "$CONFIG_FOOTBRIDGE_HOST" = "y" -o \
"$CONFIG_ARCH_SHARK" = "y" -o \
"$CONFIG_ARCH_SA1100" = "y" -o \
"$CONFIG_ARCH_INTEGRATOR" = "y" -o \
"$CONFIG_ARCH_TBOX" = "y" -o \
"$CONFIG_ARCH_CLPS7500" = "y" -o \
"$CONFIG_ARCH_P720T" = "y" -o \
"$CONFIG_ARCH_ANAKIN" = "y" ]; then
define_bool CONFIG_PC_KEYMAP y
fi
if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then
bool 'VGA text console' CONFIG_VGA_CONSOLE bool 'VGA text console' CONFIG_VGA_CONSOLE
fi fi
......
arch/arm/mach-arc/Config.help 0 → 100644
View file @ ea1432c7
CONFIG_ARCH_ARCA5K
This selects what ARM system you wish to build the kernel for. It
also selects to some extent the CPU type. If you are unsure what
to set this option to, please consult any information supplied with
your system.
CONFIG_ARCH_A5K
Say Y here to to support the Acorn A5000. Linux can support the
internal IDE disk and CD-ROM interface, serial and parallel port,
and the floppy drive. Note that on some A5000s the floppy is
plugged into the wrong socket on the motherboard.
CONFIG_ARCH_ARC
The Acorn Archimedes was an personal computer based on an 8K ARM2
processor, released in 1987. It supported 512K of RAM and 2 800K
floppy disks. Picture and more detailed specifications at
<http://www.computingmuseum.com/museum/archi.htm>.
CONFIG_PAGESIZE_16
Say Y here if your Archimedes or A5000 system has only 2MB of
memory, otherwise say N. The resulting kernel will not run on a
machine with 4MB of memory.
arch/arm/mach-arc/Config.in 0 → 100644
View file @ ea1432c7
mainmenu_option next_comment
comment 'Archimedes/A5000 Implementations'
# These architectures will be combined. However, until this
# is complete... Note that the ARC will take precedence over
# A5K
comment 'Archimedes/A5000 Implementations (select only ONE)'
dep_bool ' Archimedes' CONFIG_ARCH_ARC $CONFIG_ARCH_ARCA5K
dep_bool ' A5000' CONFIG_ARCH_A5K $CONFIG_ARCH_ARCA5K
if [ "$CONFIG_ARCH_ARCA5K" = "y" ]; then
bool '2MB physical memory' CONFIG_PAGESIZE_16
fi
endmenu
arch/arm/mach-clps711x/Config.help 0 → 100644
View file @ ea1432c7
CONFIG_ARCH_AUTCPU12
Say Y if you intend to run the kernel on the autronix autcpu12
board. This board is based on a Cirrus Logic CS89712.
CONFIG_ARCH_CDB89712
This is an evaluation board from Cirrus for the CS89712 processor.
The board includes 2 serial ports, Ethernet, IRDA, and expansion
headers. It comes with 16 MB SDRAM and 8 MB flash ROM.
CONFIG_ARCH_CEIVA
Say Y here if you intend to run this kernel on the Ceiva/Polaroid
PhotoMax Digital Picture Frame.
CONFIG_ARCH_EDB7211
Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
evaluation board.
CONFIG_ARCH_P720T
Say Y here if you intend to run this kernel on the ARM Prospector
720T.
CONFIG_EP72XX_ROM_BOOT
If you say Y here, your CLPS711x-based kernel will use the bootstrap
mode memory map instead of the normal memory map.
Processors derived from the Cirrus CLPS-711X core support two boot
modes. Normal mode boots from the external memory device at CS0.
Bootstrap mode rearranges parts of the memory map, placing an
internal 128 byte bootstrap ROM at CS0. This option performs the
address map changes required to support booting in this mode.
You almost surely want to say N here.
arch/arm/mach-clps711x/Config.in 0 → 100644
View file @ ea1432c7
mainmenu_option next_comment
comment 'CLPS711X/EP721X Implementations'
dep_bool ' AUTCPU12' CONFIG_ARCH_AUTCPU12 $CONFIG_ARCH_CLPS711X
dep_bool ' CDB89712' CONFIG_ARCH_CDB89712 $CONFIG_ARCH_CLPS711X
dep_bool ' CEIVA' CONFIG_ARCH_CEIVA $CONFIG_ARCH_CLPS711X
dep_bool ' CLEP7312' CONFIG_ARCH_CLEP7312 $CONFIG_ARCH_CLPS711X
dep_bool ' EDB7211' CONFIG_ARCH_EDB7211 $CONFIG_ARCH_CLPS711X
dep_bool ' P720T' CONFIG_ARCH_P720T $CONFIG_ARCH_CLPS711X
dep_bool ' FORTUNET' CONFIG_ARCH_FORTUNET $CONFIG_ARCH_CLPS711X
# XXX Maybe these should indicate register compatibility
# instead of being mutually exclusive.
if [ "$CONFIG_ARCH_EDB7211" = "y" ]; then
define_bool CONFIG_ARCH_EP7211 y
else
define_bool CONFIG_ARCH_EP7211 n
fi
if [ "$CONFIG_ARCH_P720T" = "y" -o \
"$CONFIG_ARCH_CEIVA" = "y" ]; then
define_bool CONFIG_ARCH_EP7212 y
else
define_bool CONFIG_ARCH_EP7212 n
fi
if [ "$CONFIG_ARCH_EP7211" = "y" -o \
"$CONFIG_ARCH_EP7212" = "y" ]; then
bool ' EP72xx ROM boot' CONFIG_EP72XX_ROM_BOOT
fi
endmenu
arch/arm/mach-epxa10db/Config.help 0 → 100644
View file @ ea1432c7
CONFIG_PLD_HOTSWAP
This enables support for the dynamic loading and configuration of
compatible drivers when the contents of the PLD are changed. This
is still experimental and requires configuration tools which are
not yet generally available. Say N here. You must enable the kernel
module loader for this feature to work.
arch/arm/mach-epxa10db/Config.in 0 → 100644
View file @ ea1432c7
mainmenu_option next_comment
comment 'Epxa10db'
if [ "$CONFIG_ARCH_CAMELOT" = "y" ]; then
comment 'PLD hotswap support'
define_bool CONFIG_PLD y
dep_bool 'Support for PLD device hotplugging (experimental)' CONFIG_PLD_HOTSWAP $CONFIG_EXPERIMENTAL
fi
endmenu
arch/arm/mach-footbridge/Config.help 0 → 100644
View file @ ea1432c7
CONFIG_ARCH_CATS
Say Y here if you intend to run this kernel on the CATS.
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_EBSA285_ADDIN
Say Y here if you intend to run this kernel on the EBSA285 card
in addin mode.
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_EBSA285_HOST
Say Y here if you intend to run this kernel on the EBSA285 card
in host ("central function") mode.
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_NETWINDER
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
<http://www.netwinder.org/>
Saying N will reduce the size of the Footbridge kernel.
CONFIG_ARCH_PERSONAL_SERVER
Say Y here if you intend to run this kernel on the Compaq
Personal Server.
Saying N will reduce the size of the Footbridge kernel.
The Compaq Personal Server is not available for purchase.
There are no product plans beyond the current research
prototypes at this time. Information is available at:
<http://crl.research.compaq.com/projects/personalserver/>
If you have any questions or comments about the Compaq Personal
Server, send e-mail to skiff@crl.dec.com.
arch/arm/mach-footbridge/Config.in 0 → 100644
View file @ ea1432c7
mainmenu_option next_comment
comment 'Footbridge Implementations'
dep_bool ' CATS' CONFIG_ARCH_CATS $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' Compaq Personal Server' CONFIG_ARCH_PERSONAL_SERVER $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' EBSA285 (addin mode)' CONFIG_ARCH_EBSA285_ADDIN $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' EBSA285 (host mode)' CONFIG_ARCH_EBSA285_HOST $CONFIG_ARCH_FOOTBRIDGE
dep_bool ' NetWinder' CONFIG_ARCH_NETWINDER $CONFIG_ARCH_FOOTBRIDGE
endmenu
arch/arm/mach-iop310/Config.help 0 → 100644
View file @ ea1432c7
CONFIG_ARCH_IQ80310
Say Y here if you want to run your kernel on the Intel IQ80310
evaluation kit for the IOP310 chipset.
arch/arm/mach-iop310/Config.in 0 → 100644
View file @ ea1432c7
mainmenu_option next_comment
comment 'IOP310 Implementation Options'
dep_bool ' IQ80310' CONFIG_ARCH_IQ80310 $CONFIG_ARCH_IOP310
comment 'IOP310 Chipset Features'
dep_bool 'Support Intel 80312 Application Accelerator Unit (EXPERIMENTAL)' CONFIG_IOP310_AAU $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 DMA (EXPERIMENTAL)' CONFIG_IOP310_DMA $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 Messaging Unit (EXPERIMENTAL)' CONFIG_IOP310_MU $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 Performance Monitor (EXPERIMENTAL)' CONFIG_IOP310_PMON $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
endmenu
arch/arm/mach-pxa/Config.in 0 → 100644
View file @ ea1432c7
mainmenu_option next_comment
comment 'Intel PXA250/210 Implementations'
dep_bool ' Intel DBPXA250 Development Platform' CONFIG_ARCH_LUBBOCK $CONFIG_ARCH_PXA
dep_bool ' Accelent Xscale IDP' CONFIG_ARCH_PXA_IDP $CONFIG_ARCH_PXA
endmenu
arch/arm/mach-sa1100/Config.help 0 → 100644
View file @ ea1432c7
CONFIG_SA1100_ASSABET
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (also known as the Assabet).
CONFIG_ASSABET_NEPONSET
Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
Microprocessor Development Board (Assabet) with the SA-1111
Development Board (Nepon).
CONFIG_SA1100_ADSBITSY
Say Y here if you are using Applied Data Systems Intel(R)
StrongARM(R) 1110 based Bitsy, 3 x 5 inches in size, Compaq - IPAQ -
like platform. See
<http://www.applieddata.net/products_bitsySpec.asp> for more
information.
CONFIG_SA1100_BRUTUS
Say Y here if you are using the Intel(R) StrongARM(R) SA-1100
Microprocessor Development Board (also known as the Brutus).
CONFIG_SA1100_CERF
The Intrinsyc CerfBoard is based on the StrongARM 1110.
More information is available at:
<http://www.intrinsyc.com/products/referenceplatforms/cerfboard.html>.
Say Y if configuring for an Intrinsyc CerfBoard.
Say N otherwise.
CONFIG_SA1100_CERF_CPLD
Say Y here to support the Linux CerfPDA development kit from
Intrinsyc. This is a StrongARM-1110-based reference platform for
designing custom PDAs. Product info is at
<http://www.intrinsyc.com/products/referencedesigns/cerfpda.asp>.
CONFIG_SA1100_H3100
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3100 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
<http://www.compaq.com/products/handhelds/pocketpc/>
CONFIG_SA1100_H3600
Say Y here if you intend to run this kernel on the Compaq iPAQ
H3600 handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
<http://www.compaq.com/products/handhelds/pocketpc/>
CONFIG_SA1100_H3800
Say Y here if you intend to run this kernel on the Compaq iPAQ H3800
series handheld computer. Information about this machine and the
Linux port to this machine can be found at:
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3800>
<http://www.compaq.com/products/handhelds/pocketpc/>
CONFIG_H3600_SLEEVE
Choose this option to enable support for extension packs (sleeves)
for the Compaq iPAQ H3XXX series of handheld computers. This option
is required for the CF, PCMCIA, Bluetooth and GSM/GPRS extension
packs.
CONFIG_SA1100_FLEXANET
Say Y here if you intend to run this kernel on the FlexaNet
handheld instruments. Information about this machine can be
found at: <http://www.flexanet.com/>.
CONFIG_SA1100_FREEBIRD
Support the FreeBird board used in Coventive embedded products. See
Documentation/arm/SA1100/Freebird for more.
CONFIG_SA1100_GRAPHICSCLIENT
Say Y here if you are using an Applied Data Systems Intel(R)
StrongARM(R) SA-1100 based Graphics Client SBC. See
<http://www.flatpanels.com/> for information on this system.
CONFIG_SA1100_GRAPHICSMASTER
Say Y here if you are using an Applied Data Systems Intel(R)
StrongARM(R) SA-1100 based Graphics Master SBC with SA-1111
StrongARM companion chip. See
<http://www.applieddata.net/products_masterSpec.asp> for information
on this system.
CONFIG_SA1100_BADGE4
Say Y here if you want to build a kernel for the HP Laboratories
BadgePAD 4.
CONFIG_SA1100_JORNADA720
Say Y here if you want to build a kernel for the HP Jornada 720
handheld computer. See <http://www.hp.com/jornada/products/720>
for details.
CONFIG_SA1100_HUW_WEBPANEL
Say Y here to support the HuW Webpanel produced by Hoeft & Wessel
AG. English-language website is at
<http://www.hoeft-wessel.de/en.htm>; credits and build instructions
at Documentation/arm/SA1100/HUW_WEBPANEL.
CONFIG_SA1100_ITSY
Say Y here if you are using the Compaq Itsy experimental pocket
computer. See <http://research.compaq.com/wrl/projects/itsy/> for
more information.
CONFIG_SA1100_LART
Say Y here if you are using the Linux Advanced Radio Terminal
(also known as the LART). See <http://www.lart.tudelft.nl/> for
information on the LART.
CONFIG_SA1100_NANOENGINE
The nanoEngine is a StrongARM 1110-based single board computer
from Bright Star Engineering. More information is available at:
<http://www.brightstareng.com/arm/nanoeng.htm>.
Say Y if configuring for a nanoEngine.
Say N otherwise.
CONFIG_SA1100_OMNIMETER
Say Y here if you are using the inhand electronics OmniMeter. See
<http://www.inhandelectronics.com/html/omni1.html> for details.
CONFIG_SA1100_PANGOLIN
Pangolin is a StrongARM 1110-based evaluation platform produced
by Dialogue Technology. It has EISA slots for ease of configuration
with SDRAM/Flash memory card, USB/Serial/Audio card, Compact Flash
card, and TFT-LCD card.
Say Y if configuring for a Pangolin.
Say N otherwise.
CONFIG_SA1100_PLEB
Say Y here if you are using a Portable Linux Embedded Board
(also known as PLEB). See <http://www.cse.unsw.edu.au/~pleb/>
for more information.
CONFIG_SA1100_PT_SYSTEM3
Say Y here if you intend to build a kernel suitable to run on
a Pruftechnik Digital Board. For more information see
<http://www.pruftechnik.com>
CONFIG_SA1100_SHANNON
The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
limited edition webphone produced by Philips. The Shannon is a SA1100
platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
and a telco interface.
CONFIG_SA1100_SHERMAN
Say Y here to support the Blazie Engineering `Sherman' StrongARM
1110-based SBC, used primarily in assistance products for the
visually impaired. The company is now Freedom Scientific, with
a website at <http://www.freedomscientific.com/index.html>. The
Sherman product, however, appears to have been discontinued.
CONFIG_SA1100_SIMPAD
The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a
PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same
like CL4 in additional it has a PCMCIA-Slot. For more information
visit <http://www.my-siemens.com or www.siemens.ch>.
CONFIG_SA1100_PFS168
The Radisys Corp. PFS-168 (aka Tulsa) is an Intel® StrongArm® SA-1110 based
computer which includes the SA-1111 Microprocessor Companion Chip and other
custom I/O designed to add connectivity and multimedia features for vending
and business machine applications. Say Y here if you require support for
this target.
CONFIG_SA1100_VICTOR
Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
SA-1100 based Victor Digital Talking Book Reader. See
<http://www.visuaide.com/pagevictor.en.html> for information on
this system.
CONFIG_SA1100_XP860
:: Config help missing ::
:: 06 August 2002 ::
CONFIG_SA1100_YOPY
Say Y here to support the Yopy PDA. Product information at
<http://www.yopy.com/>. See Documentation/arm/SA110/Yopy
for more.
CONFIG_SA1100_STORK
Say Y here if you intend to run this kernel on the Stork
handheld computer.
arch/arm/mach-sa1100/Config.in 0 → 100644
View file @ ea1432c7
mainmenu_option next_comment
comment 'SA11x0 Implementations'
dep_bool ' Assabet' CONFIG_SA1100_ASSABET $CONFIG_ARCH_SA1100
dep_bool ' Include support for Neponset' CONFIG_ASSABET_NEPONSET $CONFIG_SA1100_ASSABET
dep_bool ' ADS Bitsy' CONFIG_SA1100_ADSBITSY $CONFIG_ARCH_SA1100
dep_bool ' Brutus' CONFIG_SA1100_BRUTUS $CONFIG_ARCH_SA1100
dep_bool ' CerfBoard' CONFIG_SA1100_CERF $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_CERF" = "y" ]; then
choice 'Cerf Flash available' \
"8MB CONFIG_SA1100_CERF_FLASH_8MB \
16MB CONFIG_SA1100_CERF_FLASH_16MB \
32MB CONFIG_SA1100_CERF_FLASH_32MB" 8MB
bool 'Cerf w/CPLD support (CerfPDA)' CONFIG_SA1100_CERF_CPLD
fi
dep_bool ' Compaq iPAQ H3100' CONFIG_SA1100_H3100 $CONFIG_ARCH_SA1100
dep_bool ' Compaq iPAQ H3600/H3700' CONFIG_SA1100_H3600 $CONFIG_ARCH_SA1100
dep_bool ' Compaq iPAQ H3800' CONFIG_SA1100_H3800 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_H3100" = "y" -o "$CONFIG_SA1100_H3600" = "y" -o "$CONFIG_SA1100_H3800" = "y" ]; then
define_bool CONFIG_SA1100_H3XXX y
else
define_bool CONFIG_SA1100_H3XXX n
fi
#dep_bool ' Consus' CONFIG_SA1100_CONSUS $CONFIG_ARCH_SA1100
#dep_bool ' Empeg' CONFIG_SA1100_EMPEG $CONFIG_ARCH_SA1100
dep_bool ' Extenex HandHeld Theater (Squashtail)' CONFIG_SA1100_EXTENEX1 $CONFIG_ARCH_SA1100
if [ "$CONFIG_SA1100_EXTENEX1" = "y" ]; then
bool ' Support 16 MB of DRAM (not just 8)' CONFIG_SA1100_EXTENEX1_16MB
fi
dep_bool ' FlexaNet' CONFIG_SA1100_FLEXANET $CONFIG_ARCH_SA1100
dep_bool ' FreeBird-v1.1' CONFIG_SA1100_FREEBIRD $CONFIG_ARCH_SA1100
dep_bool ' GraphicsClient Plus' CONFIG_SA1100_GRAPHICSCLIENT $CONFIG_ARCH_SA1100
dep_bool ' GraphicsMaster' CONFIG_SA1100_GRAPHICSMASTER $CONFIG_ARCH_SA1100
dep_bool ' HP Labs BadgePAD 4' CONFIG_SA1100_BADGE4 $CONFIG_ARCH_SA1100
dep_bool ' HP Jornada 720' CONFIG_SA1100_JORNADA720 $CONFIG_ARCH_SA1100
dep_bool ' HuW WebPanel' CONFIG_SA1100_HUW_WEBPANEL $CONFIG_ARCH_SA1100
dep_bool ' Itsy' CONFIG_SA1100_ITSY $CONFIG_ARCH_SA1100
dep_bool ' LART' CONFIG_SA1100_LART $CONFIG_ARCH_SA1100
dep_bool ' nanoEngine' CONFIG_SA1100_NANOENGINE $CONFIG_ARCH_SA1100
dep_bool ' OmniMeter' CONFIG_SA1100_OMNIMETER $CONFIG_ARCH_SA1100
dep_bool ' Pangolin' CONFIG_SA1100_PANGOLIN $CONFIG_ARCH_SA1100
dep_bool ' PLEB' CONFIG_SA1100_PLEB $CONFIG_ARCH_SA1100
dep_bool ' PT System 3' CONFIG_SA1100_PT_SYSTEM3 $CONFIG_ARCH_SA1100
dep_bool ' Shannon' CONFIG_SA1100_SHANNON $CONFIG_ARCH_SA1100
dep_bool ' Sherman' CONFIG_SA1100_SHERMAN $CONFIG_ARCH_SA1100
dep_bool ' Simpad' CONFIG_SA1100_SIMPAD $CONFIG_ARCH_SA1100
dep_bool ' Tulsa' CONFIG_SA1100_PFS168 $CONFIG_ARCH_SA1100
dep_bool ' Victor' CONFIG_SA1100_VICTOR $CONFIG_ARCH_SA1100
dep_bool ' XP860' CONFIG_SA1100_XP860 $CONFIG_ARCH_SA1100
dep_bool ' Yopy' CONFIG_SA1100_YOPY $CONFIG_ARCH_SA1100
dep_bool ' Stork' CONFIG_SA1100_STORK $CONFIG_ARCH_SA1100
dep_tristate 'SA1100 USB function support' CONFIG_SA1100_USB $CONFIG_ARCH_SA1100
dep_tristate ' Support for SA11x0 USB network link function' CONFIG_SA1100_USB_NETLINK $CONFIG_SA1100_USB
dep_tristate ' Support for SA11x0 USB character device emulation' CONFIG_SA1100_USB_CHAR $CONFIG_SA1100_USB
dep_tristate 'Compaq iPAQ Handheld sleeve support' CONFIG_H3600_SLEEVE $CONFIG_SA1100_H3600
endmenu
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7