Commit ea200dec authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "I didn't get a batch in this weekend, so here's what we queued up last
  week and today.

   - A couple of defconfigs add back debugfs -- it used to be implicitly
     enabled through CONFIG_TRACING, but 0e4a459f ("tracing:
     Remove unnecessary DEBUG_FS dependency") removed that.

   - The rest are mostly minor fixlets of the usual kind; some DT
     tweaks, a headerfile refactor that needs a build fix now, etc"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: bcm: Add missing sentinel to bcm2711_compat[]
  ARM: shmobile: defconfig: Restore debugfs support
  bus: ti-sysc: Fix missing reset delay handling
  ARM: imx: Fix boot crash if ocotp is not found
  ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
  ARM: dts: imx6ul-evk: Fix peripheral regulator
  arm64: dts: ls1028a: fix reboot node
  ARM: mmp: include the correct cputype.h
  ARM: dts: am437x-gp/epos-evm: fix panel compatible
  arm64: dts: ls1028a: fix typo in TMU calibration data
  ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
  ARM: dts: bcm283x: Fix critical trip point
  ARM: omap2plus_defconfig: Add back DEBUG_FS
  ARM: omap2plus_defconfig: enable NET_SWITCHDEV
  ARM: dts: am335x-sancloud-bbe: fix phy mode
  bus: ti-sysc: Fix missing force mstandby quirk handling
  reset: Do not register resource data for missing resets
  reset: Fix {of,devm}_reset_control_array_get kerneldoc return types
  reset: brcmstb: Remove resource checks
  dt-bindings: reset: Fix brcmstb-reset example
  ...
parents 6afa8731 e3992af1
......@@ -152,6 +152,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
......
......@@ -22,6 +22,6 @@ Example:
};
&ethernet_switch {
resets = <&reset>;
resets = <&reset 26>;
reset-names = "switch";
};
......@@ -2272,6 +2272,7 @@ F: drivers/*/*s3c64xx*
F: drivers/*/*s5pv210*
F: drivers/memory/samsung/
F: drivers/soc/samsung/
F: drivers/tty/serial/samsung*
F: include/linux/soc/samsung/
F: Documentation/arm/samsung/
F: Documentation/devicetree/bindings/arm/samsung/
......@@ -5000,7 +5001,7 @@ F: include/linux/dma-mapping.h
F: include/linux/dma-noncoherent.h
DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422
M: Lukasz Luba <l.luba@partner.samsung.com>
M: Lukasz Luba <lukasz.luba@arm.com>
L: linux-pm@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Maintained
......
......@@ -108,7 +108,7 @@ ethphy0: ethernet-phy@0 {
&cpsw_emac0 {
phy-handle = <&ethphy0>;
phy-mode = "rgmii-txid";
phy-mode = "rgmii-id";
};
&i2c0 {
......
......@@ -86,7 +86,7 @@ &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
};
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
......
......@@ -42,7 +42,7 @@ vbat: fixedregulator0 {
};
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
......
......@@ -174,8 +174,8 @@ gpio_crmu: gpio@3024800 {
mdio: mdio@18002000 {
compatible = "brcm,iproc-mdio";
reg = <0x18002000 0x8>;
#size-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
#address-cells = <1>;
status = "disabled";
gphy0: ethernet-phy@0 {
......
......@@ -43,7 +43,7 @@ soc {
<0x7c000000 0x0 0xfc000000 0x02000000>,
<0x40000000 0x0 0xff800000 0x00800000>;
/* Emulate a contiguous 30-bit address range for DMA */
dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
/*
* This node is the provider for the enable-method for
......
......@@ -37,7 +37,7 @@ cpu_thermal: cpu-thermal {
trips {
cpu-crit {
temperature = <80000>;
temperature = <90000>;
hysteresis = <0>;
type = "critical";
};
......
......@@ -353,8 +353,8 @@ gmac3: ethernet@27000 {
mdio: mdio@18003000 {
compatible = "brcm,iproc-mdio";
reg = <0x18003000 0x8>;
#size-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
#address-cells = <1>;
};
mdio-bus-mux@18003000 {
......
......@@ -265,11 +265,6 @@ ldortc1_reg: LDORTC1 {
regulator-name = "LDORTC1";
regulator-boot-on;
};
ldortc2_reg: LDORTC2 {
regulator-name = "LDORTC2";
regulator-boot-on;
};
};
};
};
......
......@@ -30,14 +30,26 @@ reg_sd1_vmmc: regulator-sd1-vmmc {
enable-active-high;
};
reg_sensors: regulator-sensors {
reg_peri_3v3: regulator-peri-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sensors_reg>;
regulator-name = "sensors-supply";
pinctrl-0 = <&pinctrl_peri_3v3>;
regulator-name = "VPERI_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
/*
* If you want to want to make this dynamic please
* check schematics and test all affected peripherals:
*
* - sensors
* - ethernet phy
* - can
* - bluetooth
* - wm8960 audio codec
* - ov5640 camera
*/
regulator-always-on;
};
reg_can_3v3: regulator-can-3v3 {
......@@ -140,6 +152,7 @@ &fec1 {
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
phy-supply = <&reg_peri_3v3>;
status = "okay";
};
......@@ -148,6 +161,7 @@ &fec2 {
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <&ethphy1>;
phy-supply = <&reg_peri_3v3>;
status = "okay";
mdio {
......@@ -193,8 +207,8 @@ &i2c1 {
magnetometer@e {
compatible = "fsl,mag3110";
reg = <0x0e>;
vdd-supply = <&reg_sensors>;
vddio-supply = <&reg_sensors>;
vdd-supply = <&reg_peri_3v3>;
vddio-supply = <&reg_peri_3v3>;
};
};
......@@ -227,7 +241,7 @@ &qspi {
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a";
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
......@@ -462,7 +476,7 @@ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x17059
>;
};
pinctrl_sensors_reg: sensorsreggrp {
pinctrl_peri_3v3: peri3v3grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
>;
......
......@@ -350,6 +350,7 @@ CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
......
......@@ -462,6 +462,7 @@ CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
......
......@@ -92,6 +92,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NETFILTER=y
CONFIG_PHONET=m
CONFIG_NET_SWITCHDEV=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
......@@ -181,6 +182,7 @@ CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_TI_CPSW=y
CONFIG_TI_CPSW_SWITCHDEV=y
CONFIG_TI_CPTS=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
......@@ -554,6 +556,6 @@ CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_TI_CPSW_SWITCHDEV=y
......@@ -212,4 +212,5 @@ CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
......@@ -13,6 +13,7 @@ static const char * const bcm2711_compat[] = {
#ifdef CONFIG_ARCH_MULTI_V7
"brcm,bcm2711",
#endif
NULL
};
DT_MACHINE_START(BCM2711, "BCM2711")
......
......@@ -84,7 +84,7 @@ struct device * __init imx_soc_device_init(void)
const char *ocotp_compat = NULL;
struct soc_device *soc_dev;
struct device_node *root;
struct regmap *ocotp;
struct regmap *ocotp = NULL;
const char *soc_id;
u64 soc_uid = 0;
u32 val;
......@@ -148,11 +148,11 @@ struct device * __init imx_soc_device_init(void)
soc_id = "i.MX6UL";
break;
case MXC_CPU_IMX6ULL:
ocotp_compat = "fsl,imx6ul-ocotp";
ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULL";
break;
case MXC_CPU_IMX6ULZ:
ocotp_compat = "fsl,imx6ul-ocotp";
ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULZ";
break;
case MXC_CPU_IMX6SLL:
......@@ -175,7 +175,9 @@ struct device * __init imx_soc_device_init(void)
ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
if (IS_ERR(ocotp))
pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
}
if (!IS_ERR_OR_NULL(ocotp)) {
regmap_read(ocotp, OCOTP_UID_H, &val);
soc_uid = val;
regmap_read(ocotp, OCOTP_UID_L, &val);
......
......@@ -17,9 +17,9 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
#include <linux/soc/mmp/cputype.h>
#include "devices.h"
#include "cputype.h"
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
......
......@@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
static int __init ve_spc_clk_init(void)
{
int cpu;
int cpu, cluster;
struct clk *clk;
bool init_opp_table[MAX_CLUSTERS] = { false };
if (!info)
return 0; /* Continue only if SPC is initialised */
......@@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
continue;
}
cluster = topology_physical_package_id(cpu_dev->id);
if (init_opp_table[cluster])
continue;
if (ve_init_opp_table(cpu_dev))
pr_warn("failed to initialise cpu%d opp table\n", cpu);
else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
topology_core_cpumask(cpu_dev->id)))
pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
else
init_opp_table[cluster] = true;
}
platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
......
......@@ -88,7 +88,7 @@ dpclk: clock-controller@f1f0000 {
reboot {
compatible ="syscon-reboot";
regmap = <&dcfg>;
regmap = <&rst>;
offset = <0xb0>;
mask = <0x02>;
};
......@@ -178,6 +178,12 @@ dcfg: syscon@1e00000 {
big-endian;
};
rst: syscon@1e60000 {
compatible = "syscon";
reg = <0x0 0x1e60000 0x0 0x10000>;
little-endian;
};
scfg: syscon@1fc0000 {
compatible = "fsl,ls1028a-scfg", "syscon";
reg = <0x0 0x1fc0000 0x0 0x10000>;
......@@ -584,7 +590,7 @@ tmu: tmu@1f80000 {
0x00010004 0x0000003d
0x00010005 0x00000045
0x00010006 0x0000004d
0x00010007 0x00000045
0x00010007 0x00000055
0x00010008 0x0000005e
0x00010009 0x00000066
0x0001000a 0x0000006e
......
......@@ -981,7 +981,8 @@ static int sysc_disable_module(struct device *dev)
return ret;
}
if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_MSTANDBY) ||
ddata->cfg.quirks & (SYSC_QUIRK_FORCE_MSTANDBY))
best_mode = SYSC_IDLE_FORCE;
reg &= ~(SYSC_IDLE_MASK << regbits->midle_shift);
......@@ -1583,6 +1584,10 @@ static int sysc_reset(struct sysc *ddata)
sysc_val |= sysc_mask;
sysc_write(ddata, sysc_offset, sysc_val);
if (ddata->cfg.srst_udelay)
usleep_range(ddata->cfg.srst_udelay,
ddata->cfg.srst_udelay * 2);
if (ddata->clk_enable_quirk)
ddata->clk_enable_quirk(ddata);
......
......@@ -434,7 +434,7 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
if (cur_cluster < MAX_CLUSTERS) {
int cpu;
cpumask_copy(policy->cpus, topology_core_cpumask(policy->cpu));
dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus);
for_each_cpu(cpu, policy->cpus)
per_cpu(physical_cluster, cpu) = cur_cluster;
......
......@@ -787,7 +787,7 @@ struct reset_control *__devm_reset_control_get(struct device *dev,
return ERR_PTR(-ENOMEM);
rstc = __reset_control_get(dev, id, index, shared, optional, acquired);
if (!IS_ERR(rstc)) {
if (!IS_ERR_OR_NULL(rstc)) {
*ptr = rstc;
devres_add(dev, ptr);
} else {
......@@ -861,8 +861,7 @@ static int of_reset_control_get_count(struct device_node *node)
* @acquired: only one reset control may be acquired for a given controller
* and ID
*
* Returns pointer to allocated reset_control_array on success or
* error on failure
* Returns pointer to allocated reset_control on success or error on failure
*/
struct reset_control *
of_reset_control_array_get(struct device_node *np, bool shared, bool optional,
......@@ -915,8 +914,7 @@ EXPORT_SYMBOL_GPL(of_reset_control_array_get);
* that just have to be asserted or deasserted, without any
* requirements on the order.
*
* Returns pointer to allocated reset_control_array on success or
* error on failure
* Returns pointer to allocated reset_control on success or error on failure
*/
struct reset_control *
devm_reset_control_array_get(struct device *dev, bool shared, bool optional)
......@@ -930,7 +928,7 @@ devm_reset_control_array_get(struct device *dev, bool shared, bool optional)
return ERR_PTR(-ENOMEM);
rstc = of_reset_control_array_get(dev->of_node, shared, optional, true);
if (IS_ERR(rstc)) {
if (IS_ERR_OR_NULL(rstc)) {
devres_free(devres);
return rstc;
}
......
......@@ -91,12 +91,6 @@ static int brcmstb_reset_probe(struct platform_device *pdev)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!IS_ALIGNED(res->start, SW_INIT_BANK_SIZE) ||
!IS_ALIGNED(resource_size(res), SW_INIT_BANK_SIZE)) {
dev_err(kdev, "incorrect register range\n");
return -EINVAL;
}
priv->base = devm_ioremap_resource(kdev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
......
......@@ -49,6 +49,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
#define SYSC_QUIRK_FORCE_MSTANDBY BIT(20)
#define SYSC_MODULE_QUIRK_AESS BIT(19)
#define SYSC_MODULE_QUIRK_SGX BIT(18)
#define SYSC_MODULE_QUIRK_HDQ1W BIT(17)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment