Commit ea8b65b5 authored by Stephane Grosjean's avatar Stephane Grosjean Committed by Marc Kleine-Budde

can: usb: Add support of PCAN-Chip USB stamp module

This patch adds the support of the PCAN-Chip USB, a stamp module for
customer hardware designs, which communicates via USB 2.0 with the
hardware. The integrated CAN controller supports the protocols CAN 2.0 A/B
as well as CAN FD. The physical CAN connection is determined by external
wiring. The Stamp module with its single-sided mounting and plated
half-holes is suitable for automatic assembly.

Note that the chip is equipped with the same logic than the PCAN-USB FD.
Signed-off-by: default avatarStephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: default avatarMarc Kleine-Budde <mkl@pengutronix.de>
parent 38a98bce
......@@ -72,6 +72,7 @@ config CAN_PEAK_USB
PCAN-USB Pro dual CAN 2.0b channels USB adapter
PCAN-USB FD single CAN-FD channel USB adapter
PCAN-USB Pro FD dual CAN-FD channels USB adapter
PCAN-Chip USB CAN-FD to USB stamp module
(see also http://www.peak-system.com).
......
......@@ -39,6 +39,7 @@ static struct usb_device_id peak_usb_table[] = {
{USB_DEVICE(PCAN_USB_VENDOR_ID, PCAN_USBPRO_PRODUCT_ID)},
{USB_DEVICE(PCAN_USB_VENDOR_ID, PCAN_USBFD_PRODUCT_ID)},
{USB_DEVICE(PCAN_USB_VENDOR_ID, PCAN_USBPROFD_PRODUCT_ID)},
{USB_DEVICE(PCAN_USB_VENDOR_ID, PCAN_USBCHIP_PRODUCT_ID)},
{USB_DEVICE(PCAN_USB_VENDOR_ID, PCAN_USBX6_PRODUCT_ID)},
{} /* Terminating entry */
};
......@@ -51,6 +52,7 @@ static const struct peak_usb_adapter *const peak_usb_adapters_list[] = {
&pcan_usb_pro,
&pcan_usb_fd,
&pcan_usb_pro_fd,
&pcan_usb_chip,
&pcan_usb_x6,
};
......
......@@ -27,6 +27,7 @@
#define PCAN_USBPRO_PRODUCT_ID 0x000d
#define PCAN_USBPROFD_PRODUCT_ID 0x0011
#define PCAN_USBFD_PRODUCT_ID 0x0012
#define PCAN_USBCHIP_PRODUCT_ID 0x0013
#define PCAN_USBX6_PRODUCT_ID 0x0014
#define PCAN_USB_DRIVER_NAME "peak_usb"
......@@ -90,6 +91,7 @@ struct peak_usb_adapter {
extern const struct peak_usb_adapter pcan_usb;
extern const struct peak_usb_adapter pcan_usb_pro;
extern const struct peak_usb_adapter pcan_usb_fd;
extern const struct peak_usb_adapter pcan_usb_chip;
extern const struct peak_usb_adapter pcan_usb_pro_fd;
extern const struct peak_usb_adapter pcan_usb_x6;
......
......@@ -1061,6 +1061,78 @@ const struct peak_usb_adapter pcan_usb_fd = {
.do_get_berr_counter = pcan_usb_fd_get_berr_counter,
};
/* describes the PCAN-CHIP USB */
static const struct can_bittiming_const pcan_usb_chip_const = {
.name = "pcan_chip_usb",
.tseg1_min = 1,
.tseg1_max = (1 << PUCAN_TSLOW_TSGEG1_BITS),
.tseg2_min = 1,
.tseg2_max = (1 << PUCAN_TSLOW_TSGEG2_BITS),
.sjw_max = (1 << PUCAN_TSLOW_SJW_BITS),
.brp_min = 1,
.brp_max = (1 << PUCAN_TSLOW_BRP_BITS),
.brp_inc = 1,
};
static const struct can_bittiming_const pcan_usb_chip_data_const = {
.name = "pcan_chip_usb",
.tseg1_min = 1,
.tseg1_max = (1 << PUCAN_TFAST_TSGEG1_BITS),
.tseg2_min = 1,
.tseg2_max = (1 << PUCAN_TFAST_TSGEG2_BITS),
.sjw_max = (1 << PUCAN_TFAST_SJW_BITS),
.brp_min = 1,
.brp_max = (1 << PUCAN_TFAST_BRP_BITS),
.brp_inc = 1,
};
const struct peak_usb_adapter pcan_usb_chip = {
.name = "PCAN-Chip USB",
.device_id = PCAN_USBCHIP_PRODUCT_ID,
.ctrl_count = PCAN_USBFD_CHANNEL_COUNT,
.ctrlmode_supported = CAN_CTRLMODE_FD |
CAN_CTRLMODE_3_SAMPLES | CAN_CTRLMODE_LISTENONLY,
.clock = {
.freq = PCAN_UFD_CRYSTAL_HZ,
},
.bittiming_const = &pcan_usb_chip_const,
.data_bittiming_const = &pcan_usb_chip_data_const,
/* size of device private data */
.sizeof_dev_private = sizeof(struct pcan_usb_fd_device),
/* timestamps usage */
.ts_used_bits = 32,
.ts_period = 1000000, /* calibration period in ts. */
.us_per_ts_scale = 1, /* us = (ts * scale) >> shift */
.us_per_ts_shift = 0,
/* give here messages in/out endpoints */
.ep_msg_in = PCAN_USBPRO_EP_MSGIN,
.ep_msg_out = {PCAN_USBPRO_EP_MSGOUT_0},
/* size of rx/tx usb buffers */
.rx_buffer_size = PCAN_UFD_RX_BUFFER_SIZE,
.tx_buffer_size = PCAN_UFD_TX_BUFFER_SIZE,
/* device callbacks */
.intf_probe = pcan_usb_pro_probe, /* same as PCAN-USB Pro */
.dev_init = pcan_usb_fd_init,
.dev_exit = pcan_usb_fd_exit,
.dev_free = pcan_usb_fd_free,
.dev_set_bus = pcan_usb_fd_set_bus,
.dev_set_bittiming = pcan_usb_fd_set_bittiming_slow,
.dev_set_data_bittiming = pcan_usb_fd_set_bittiming_fast,
.dev_decode_buf = pcan_usb_fd_decode_buf,
.dev_start = pcan_usb_fd_start,
.dev_stop = pcan_usb_fd_stop,
.dev_restart_async = pcan_usb_fd_restart_async,
.dev_encode_msg = pcan_usb_fd_encode_msg,
.do_get_berr_counter = pcan_usb_fd_get_berr_counter,
};
/* describes the PCAN-USB Pro FD adapter */
static const struct can_bittiming_const pcan_usb_pro_fd_const = {
.name = "pcan_usb_pro_fd",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment