PCI: altera: Add Altera PCIe host controller driver

Add the Altera PCIe host controller driver.

[bhelgaas: whitespace, fold in DT and maintainer updates, OF_PCI
dependency from Arnd]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org> (DT binding)

Documentation/devicetree/bindings/pci/altera-pcie.txt

+* Altera PCIe controller
+
+Required properties:
+- compatible :	should contain "altr,pcie-root-port-1.0"
+- reg:		a list of physical base address and length for TXS and CRA.
+- reg-names:	must include the following entries:
+		"Txs": TX slave port region
+		"Cra": Control register access region
+- interrupt-parent:	interrupt source phandle.
+- interrupts:	specifies the interrupt source of the parent interrupt controller.
+		The format of the interrupt specifier depends on the parent interrupt
+		controller.
+- device_type:	must be "pci"
+- #address-cells:	set to <3>
+- #size-cells:	set to <2>
+- #interrupt-cells:	set to <1>
+- ranges:		describes the translation of addresses for root ports and standard
+		PCI regions.
+- interrupt-map-mask and interrupt-map: standard PCI properties to define the
+		mapping of the PCIe interface to interrupt numbers.
+
+Optional properties:
+- msi-parent:	Link to the hardware entity that serves as the MSI controller for this PCIe
+		controller.
+- bus-range:	PCI bus numbers covered
+
+Example
+	pcie_0: pcie@0xc00000000 {
+		compatible = "altr,pcie-root-port-1.0";
+		reg = <0xc0000000 0x20000000>,
+			<0xff220000 0x00004000>;
+		reg-names = "Txs", "Cra";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 40 4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		bus-range = <0x0 0xFF>;
+		device_type = "pci";
+		msi-parent = <&msi_to_gic_gen_0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_0 1>,
+			            <0 0 0 2 &pcie_0 2>,
+			            <0 0 0 3 &pcie_0 3>,
+			            <0 0 0 4 &pcie_0 4>;
+		ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
+			    0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
+	};

MAINTAINERS

@@ -7938,6 +7938,14 @@ F:	include/linux/pci*
 F:	arch/x86/pci/
 F:	arch/x86/kernel/quirks.c
 
+PCI DRIVER FOR ALTERA PCIE IP
+M:	Ley Foon Tan <lftan@altera.com>
+L:	rfi@lists.rocketboards.org (moderated for non-subscribers)
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/altera-pcie.txt
+F:	drivers/pci/host/pcie-altera.c
+
 PCI DRIVER FOR ARM VERSATILE PLATFORM
 M:	Rob Herring <robh@kernel.org>
 L:	linux-pci@vger.kernel.org

drivers/pci/host/Kconfig

@@ -145,4 +145,13 @@ config PCIE_IPROC_BCMA
 	  Say Y here if you want to use the Broadcom iProc PCIe controller
 	  through the BCMA bus interface
 
+config PCIE_ALTERA
+	bool "Altera PCIe controller"
+	depends on ARM || NIOS2
+	depends on OF_PCI
+	select PCI_DOMAINS
+	help
+	  Say Y here if you want to enable PCIe controller support on Altera
+	  FPGA.
+
 endmenu

drivers/pci/host/Makefile

@@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
 obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
 obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
 obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
+obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o