Commit eab60d4e authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "An assorted pile of fixes along with some hardware enablement:

   - a fix for a KASAN / branch profiling related boot failure

   - some more fallout of the PUD rework

   - a fix for the Always Running Timer which is not initialized when
     the TSC frequency is known at boot time (via MSR/CPUID)

   - a resource leak fix for the RDT filesystem

   - another unwinder corner case fixup

   - removal of the warning for duplicate NMI handlers because there are
     legitimate cases where more than one handler can be registered at
     the last level

   - make a function static - found by sparse

   - a set of updates for the Intel MID platform which got delayed due
     to merge ordering constraints. It's hardware enablement for a non
     mainstream platform, so there is no risk"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mpx: Make unnecessarily global function static
  x86/intel_rdt: Put group node in rdtgroup_kn_unlock
  x86/unwind: Fix last frame check for aligned function stacks
  mm, x86: Fix native_pud_clear build error
  x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
  x86/platform/intel-mid: Add power button support for Merrifield
  x86/platform/intel-mid: Use common power off sequence
  x86/platform: Remove warning message for duplicate NMI handlers
  x86/tsc: Fix ART for TSC_KNOWN_FREQ
  x86/platform/intel-mid: Correct MSI IRQ line for watchdog device
parents ae133733 6bce725a
......@@ -727,7 +727,7 @@ void rdtgroup_kn_unlock(struct kernfs_node *kn)
if (atomic_dec_and_test(&rdtgrp->waitcount) &&
(rdtgrp->flags & RDT_DELETED)) {
kernfs_unbreak_active_protection(kn);
kernfs_put(kn);
kernfs_put(rdtgrp->kn);
kfree(rdtgrp);
} else {
kernfs_unbreak_active_protection(kn);
......
......@@ -4,6 +4,7 @@
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
*/
#define DISABLE_BRANCH_PROFILING
#include <linux/init.h>
#include <linux/linkage.h>
#include <linux/types.h>
......
......@@ -166,11 +166,9 @@ int __register_nmi_handler(unsigned int type, struct nmiaction *action)
spin_lock_irqsave(&desc->lock, flags);
/*
* most handlers of type NMI_UNKNOWN never return because
* they just assume the NMI is theirs. Just a sanity check
* to manage expectations
* Indicate if there are multiple registrations on the
* internal NMI handler call chains (SERR and IO_CHECK).
*/
WARN_ON_ONCE(type == NMI_UNKNOWN && !list_empty(&desc->head));
WARN_ON_ONCE(type == NMI_SERR && !list_empty(&desc->head));
WARN_ON_ONCE(type == NMI_IO_CHECK && !list_empty(&desc->head));
......
......@@ -1333,6 +1333,8 @@ static int __init init_tsc_clocksource(void)
* the refined calibration and directly register it as a clocksource.
*/
if (boot_cpu_has(X86_FEATURE_TSC_KNOWN_FREQ)) {
if (boot_cpu_has(X86_FEATURE_ART))
art_related_clocksource = &clocksource_tsc;
clocksource_register_khz(&clocksource_tsc, tsc_khz);
return 0;
}
......
......@@ -82,19 +82,43 @@ static size_t regs_size(struct pt_regs *regs)
return sizeof(*regs);
}
#ifdef CONFIG_X86_32
#define GCC_REALIGN_WORDS 3
#else
#define GCC_REALIGN_WORDS 1
#endif
static bool is_last_task_frame(struct unwind_state *state)
{
unsigned long bp = (unsigned long)state->bp;
unsigned long regs = (unsigned long)task_pt_regs(state->task);
unsigned long *last_bp = (unsigned long *)task_pt_regs(state->task) - 2;
unsigned long *aligned_bp = last_bp - GCC_REALIGN_WORDS;
/*
* We have to check for the last task frame at two different locations
* because gcc can occasionally decide to realign the stack pointer and
* change the offset of the stack frame by a word in the prologue of a
* function called by head/entry code.
* change the offset of the stack frame in the prologue of a function
* called by head/entry code. Examples:
*
* <start_secondary>:
* push %edi
* lea 0x8(%esp),%edi
* and $0xfffffff8,%esp
* pushl -0x4(%edi)
* push %ebp
* mov %esp,%ebp
*
* <x86_64_start_kernel>:
* lea 0x8(%rsp),%r10
* and $0xfffffffffffffff0,%rsp
* pushq -0x8(%r10)
* push %rbp
* mov %rsp,%rbp
*
* Note that after aligning the stack, it pushes a duplicate copy of
* the return address before pushing the frame pointer.
*/
return bp == regs - FRAME_HEADER_SIZE ||
bp == regs - FRAME_HEADER_SIZE - sizeof(long);
return (state->bp == last_bp ||
(state->bp == aligned_bp && *(aligned_bp+1) == *(last_bp+1)));
}
/*
......
#define DISABLE_BRANCH_PROFILING
#define pr_fmt(fmt) "kasan: " fmt
#include <linux/bootmem.h>
#include <linux/kasan.h>
......
......@@ -590,7 +590,7 @@ static unsigned long mpx_bd_entry_to_bt_addr(struct mm_struct *mm,
* we might run off the end of the bounds table if we are on
* a 64-bit kernel and try to get 8 bytes.
*/
int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
static int get_user_bd_entry(struct mm_struct *mm, unsigned long *bd_entry_ret,
long __user *bd_entry_ptr)
{
u32 bd_entry_32;
......
......@@ -26,5 +26,6 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
# MISC Devices
obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o
obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_mrfld_wdt.o
/*
* Intel Merrifield power button support
*
* (C) Copyright 2017 Intel Corporation
*
* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2
* of the License.
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/sfi.h>
#include <asm/intel-mid.h>
#include <asm/intel_scu_ipc.h>
static struct resource mrfld_power_btn_resources[] = {
{
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mrfld_power_btn_dev = {
.name = "msic_power_btn",
.id = PLATFORM_DEVID_NONE,
.num_resources = ARRAY_SIZE(mrfld_power_btn_resources),
.resource = mrfld_power_btn_resources,
};
static int mrfld_power_btn_scu_status_change(struct notifier_block *nb,
unsigned long code, void *data)
{
if (code == SCU_DOWN) {
platform_device_unregister(&mrfld_power_btn_dev);
return 0;
}
return platform_device_register(&mrfld_power_btn_dev);
}
static struct notifier_block mrfld_power_btn_scu_notifier = {
.notifier_call = mrfld_power_btn_scu_status_change,
};
static int __init register_mrfld_power_btn(void)
{
if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
return -ENODEV;
/*
* We need to be sure that the SCU IPC is ready before
* PMIC power button device can be registered:
*/
intel_scu_notifier_add(&mrfld_power_btn_scu_notifier);
return 0;
}
arch_initcall(register_mrfld_power_btn);
static void __init *mrfld_power_btn_platform_data(void *info)
{
struct resource *res = mrfld_power_btn_resources;
struct sfi_device_table_entry *pentry = info;
res->start = res->end = pentry->irq;
return NULL;
}
static const struct devs_id mrfld_power_btn_dev_id __initconst = {
.name = "bcove_power_btn",
.type = SFI_DEV_TYPE_IPC,
.delay = 1,
.msic = 1,
.get_platform_data = &mrfld_power_btn_platform_data,
};
sfi_device(mrfld_power_btn_dev_id);
......@@ -19,7 +19,7 @@
#include <asm/intel_scu_ipc.h>
#include <asm/io_apic.h>
#define TANGIER_EXT_TIMER0_MSI 15
#define TANGIER_EXT_TIMER0_MSI 12
static struct platform_device wdt_dev = {
.name = "intel_mid_wdt",
......
......@@ -17,16 +17,6 @@
#include "intel_mid_weak_decls.h"
static void penwell_arch_setup(void);
/* penwell arch ops */
static struct intel_mid_ops penwell_ops = {
.arch_setup = penwell_arch_setup,
};
static void mfld_power_off(void)
{
}
static unsigned long __init mfld_calibrate_tsc(void)
{
unsigned long fast_calibrate;
......@@ -63,9 +53,12 @@ static unsigned long __init mfld_calibrate_tsc(void)
static void __init penwell_arch_setup(void)
{
x86_platform.calibrate_tsc = mfld_calibrate_tsc;
pm_power_off = mfld_power_off;
}
static struct intel_mid_ops penwell_ops = {
.arch_setup = penwell_arch_setup,
};
void *get_penwell_ops(void)
{
return &penwell_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment