Commit eadb188c authored by Xenia Ragiadakou's avatar Xenia Ragiadakou Committed by Greg Kroah-Hartman

staging: rtl8192u: fix spaces around for and while in r819xU_phy.c

This patch fixes whitespace around 'for' and 'while'
following the linux kernel coding style conventions.
Signed-off-by: default avatarXenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 1111b876
......@@ -483,7 +483,7 @@ void rtl8192_phy_configmac(struct net_device *dev)
dwArrayLen = MACPHY_ArrayLength;
pdwArray = rtl819XMACPHY_Array;
}
for(i = 0; i<dwArrayLen; i=i+3) {
for (i = 0; i<dwArrayLen; i=i+3) {
if (pdwArray[i] == 0x318) {
pdwArray[i+2] = 0x00000800;
//DbgPrint("ptrArray[i], ptrArray[i+1], ptrArray[i+2] = %x, %x, %x\n",
......@@ -672,7 +672,7 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF9
WriteAddr[HW90_BLOCK_PHY1] = 0x800;
WriteAddr[HW90_BLOCK_RF] = 0x3;
RT_TRACE(COMP_PHY, "=======>%s(), CheckBlock:%d\n", __FUNCTION__, CheckBlock);
for(i=0 ; i < CheckTimes ; i++) {
for (i=0 ; i < CheckTimes ; i++) {
//
// Write Data to register and readback
......@@ -744,7 +744,7 @@ void rtl8192_BB_Config_ParaFile(struct net_device *dev)
/*----Ckeck FPGAPHY0 and PHY1 board is OK----*/
// TODO: this function should be removed on ASIC , Emily 2007.2.2
for(eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++) {
for (eCheckItem=(HW90_BLOCK_E)HW90_BLOCK_PHY0; eCheckItem<=HW90_BLOCK_PHY1; eCheckItem++) {
rtStatus = rtl8192_phy_checkBBAndRF(dev, (HW90_BLOCK_E)eCheckItem, (RF90_RADIO_PATH_E)0); //don't care RF path
if (rtStatus != 0) {
RT_TRACE((COMP_ERR | COMP_PHY), "PHY_RF8256_Config():Check PHY%d Fail!!\n", eCheckItem-1);
......@@ -914,7 +914,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E
switch (eRFPath) {
case RF90_PATH_A:
for(i = 0;i<RadioA_ArrayLength; i=i+2) {
for (i = 0;i<RadioA_ArrayLength; i=i+2) {
if (rtl819XRadioA_Array[i] == 0xfe) {
mdelay(100);
......@@ -926,7 +926,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E
}
break;
case RF90_PATH_B:
for(i = 0;i<RadioB_ArrayLength; i=i+2) {
for (i = 0;i<RadioB_ArrayLength; i=i+2) {
if (rtl819XRadioB_Array[i] == 0xfe) {
mdelay(100);
......@@ -938,7 +938,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E
}
break;
case RF90_PATH_C:
for(i = 0;i<RadioC_ArrayLength; i=i+2) {
for (i = 0;i<RadioC_ArrayLength; i=i+2) {
if (rtl819XRadioC_Array[i] == 0xfe) {
mdelay(100);
......@@ -950,7 +950,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E
}
break;
case RF90_PATH_D:
for(i = 0;i<RadioD_ArrayLength; i=i+2) {
for (i = 0;i<RadioD_ArrayLength; i=i+2) {
if (rtl819XRadioD_Array[i] == 0xfe) {
mdelay(100);
......@@ -1295,7 +1295,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u
write_nic_byte(dev, CurrentCmd->Para1, (u8)CurrentCmd->Para2);
break;
case CmdID_RF_WriteReg:
for(eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) {
for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) {
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, CurrentCmd->Para1, bZebra1_ChannelNum, CurrentCmd->Para2);
}
break;
......@@ -1304,7 +1304,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u
}
break;
} while(true);
} while (true);
// }/*for(Number of RF paths)*/
(*delay)=CurrentCmd->msDelay;
......@@ -1325,7 +1325,7 @@ void rtl8192_phy_FinishSwChnlNow(struct net_device *dev, u8 channel)
struct r8192_priv *priv = ieee80211_priv(dev);
u32 delay = 0;
while(!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) {
while (!rtl8192_phy_SwChnlStepByStep(dev,channel,&priv->SwChnlStage,&priv->SwChnlStep,&delay)) {
// if(delay>0)
// msleep(delay);//or mdelay? need further consideration
if (!priv->up)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment