Commit eafaebd9 authored by Sebastian Reichel's avatar Sebastian Reichel

HSI: Introduce Nokia N900 modem driver

The Nokia N900's modem is connected via Synchronous Serial Interface (SSI),
which is a legacy version of MIPI's High-speed Synchronous Serial Interface
(HSI).

The handles the GPIOs for enabling and resetting the modem and instanciates
ssi-protocol for data exchange. It does not yet support exchanging voice data
with the modem.
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
Reviewed-by: default avatarPavel Machek <pavel@ucw.cz>
Tested-By: default avatarIvaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
parent dc7bf5d7
Nokia modem client bindings
The Nokia modem HSI client follows the common HSI client binding
and inherits all required properties. The following additional
properties are needed by the Nokia modem HSI client:
Required properties:
- compatible: Should be one of
"nokia,n900-modem"
- hsi-channel-names: Should contain the following strings
"mcsaab-control"
"speech-control"
"speech-data"
"mcsaab-data"
- gpios: Should provide a GPIO handler for each GPIO listed in
gpio-names
- gpio-names: Should contain the following strings
"cmt_apeslpx"
"cmt_rst_rq"
"cmt_en"
"cmt_rst"
"cmt_bsi"
- interrupts: Should be IRQ handle for modem's reset indication
Example:
&ssi_port {
modem: hsi-client {
compatible = "nokia,n900-modem";
pinctrl-names = "default";
pinctrl-0 = <&modem_pins>;
hsi-channel-ids = <0>, <1>, <2>, <3>;
hsi-channel-names = "mcsaab-control",
"speech-control",
"speech-data",
"mcsaab-data";
hsi-speed-kbps = <55000>;
hsi-mode = "frame";
hsi-flow = "synchronized";
hsi-arb-mode = "round-robin";
interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
<&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
gpio-names = "cmt_apeslpx",
"cmt_rst_rq",
"cmt_en",
"cmt_rst",
"cmt_bsi";
};
};
......@@ -4,6 +4,15 @@
comment "HSI clients"
config NOKIA_MODEM
tristate "Nokia Modem"
depends on HSI && SSI_PROTOCOL
help
Say Y here if you want to add support for the modem on Nokia
N900 (Nokia RX-51) hardware.
If unsure, say N.
config SSI_PROTOCOL
tristate "SSI protocol"
depends on HSI && PHONET && (OMAP_SSI=y || OMAP_SSI=m)
......
......@@ -2,5 +2,6 @@
# Makefile for HSI clients
#
obj-$(CONFIG_NOKIA_MODEM) += nokia-modem.o
obj-$(CONFIG_SSI_PROTOCOL) += ssi_protocol.o
obj-$(CONFIG_HSI_CHAR) += hsi_char.o
/*
* nokia-modem.c
*
* HSI client driver for Nokia N900 modem.
*
* Copyright (C) 2014 Sebastian Reichel <sre@kernel.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#include <linux/gpio/consumer.h>
#include <linux/hsi/hsi.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_gpio.h>
#include <linux/hsi/ssi_protocol.h>
static unsigned int pm;
module_param(pm, int, 0400);
MODULE_PARM_DESC(pm,
"Enable power management (0=disabled, 1=userland based [default])");
struct nokia_modem_gpio {
struct gpio_desc *gpio;
const char *name;
};
struct nokia_modem_device {
struct tasklet_struct nokia_modem_rst_ind_tasklet;
int nokia_modem_rst_ind_irq;
struct device *device;
struct nokia_modem_gpio *gpios;
int gpio_amount;
struct hsi_client *ssi_protocol;
};
static void do_nokia_modem_rst_ind_tasklet(unsigned long data)
{
struct nokia_modem_device *modem = (struct nokia_modem_device *)data;
if (!modem)
return;
dev_info(modem->device, "CMT rst line change detected\n");
if (modem->ssi_protocol)
ssip_reset_event(modem->ssi_protocol);
}
static irqreturn_t nokia_modem_rst_ind_isr(int irq, void *data)
{
struct nokia_modem_device *modem = (struct nokia_modem_device *)data;
tasklet_schedule(&modem->nokia_modem_rst_ind_tasklet);
return IRQ_HANDLED;
}
static void nokia_modem_gpio_unexport(struct device *dev)
{
struct nokia_modem_device *modem = dev_get_drvdata(dev);
int i;
for (i = 0; i < modem->gpio_amount; i++) {
sysfs_remove_link(&dev->kobj, modem->gpios[i].name);
gpiod_unexport(modem->gpios[i].gpio);
}
}
static int nokia_modem_gpio_probe(struct device *dev)
{
struct device_node *np = dev->of_node;
struct nokia_modem_device *modem = dev_get_drvdata(dev);
int gpio_count, gpio_name_count, i, err;
gpio_count = of_gpio_count(np);
if (gpio_count < 0) {
dev_err(dev, "missing gpios: %d\n", gpio_count);
return gpio_count;
}
gpio_name_count = of_property_count_strings(np, "gpio-names");
if (gpio_count != gpio_name_count) {
dev_err(dev, "number of gpios does not equal number of gpio names\n");
return -EINVAL;
}
modem->gpios = devm_kzalloc(dev, gpio_count *
sizeof(struct nokia_modem_gpio), GFP_KERNEL);
if (!modem->gpios) {
dev_err(dev, "Could not allocate memory for gpios\n");
return -ENOMEM;
}
modem->gpio_amount = gpio_count;
for (i = 0; i < gpio_count; i++) {
modem->gpios[i].gpio = devm_gpiod_get_index(dev, NULL, i);
if (IS_ERR(modem->gpios[i].gpio)) {
dev_err(dev, "Could not get gpio %d\n", i);
return PTR_ERR(modem->gpios[i].gpio);
}
err = of_property_read_string_index(np, "gpio-names", i,
&(modem->gpios[i].name));
if (err) {
dev_err(dev, "Could not get gpio name %d\n", i);
return err;
}
err = gpiod_direction_output(modem->gpios[i].gpio, 0);
if (err)
return err;
err = gpiod_export(modem->gpios[i].gpio, 0);
if (err)
return err;
err = gpiod_export_link(dev, modem->gpios[i].name,
modem->gpios[i].gpio);
if (err)
return err;
}
return 0;
}
static int nokia_modem_probe(struct device *dev)
{
struct device_node *np;
struct nokia_modem_device *modem;
struct hsi_client *cl = to_hsi_client(dev);
struct hsi_port *port = hsi_get_port(cl);
int irq, pflags, err;
struct hsi_board_info ssip;
np = dev->of_node;
if (!np) {
dev_err(dev, "device tree node not found\n");
return -ENXIO;
}
modem = devm_kzalloc(dev, sizeof(*modem), GFP_KERNEL);
if (!modem) {
dev_err(dev, "Could not allocate memory for nokia_modem_device\n");
return -ENOMEM;
}
dev_set_drvdata(dev, modem);
irq = irq_of_parse_and_map(np, 0);
if (irq < 0) {
dev_err(dev, "Invalid rst_ind interrupt (%d)\n", irq);
return irq;
}
modem->nokia_modem_rst_ind_irq = irq;
pflags = irq_get_trigger_type(irq);
tasklet_init(&modem->nokia_modem_rst_ind_tasklet,
do_nokia_modem_rst_ind_tasklet, (unsigned long)modem);
err = devm_request_irq(dev, irq, nokia_modem_rst_ind_isr,
IRQF_DISABLED | pflags, "modem_rst_ind", modem);
if (err < 0) {
dev_err(dev, "Request rst_ind irq(%d) failed (flags %d)\n",
irq, pflags);
return err;
}
enable_irq_wake(irq);
if(pm) {
err = nokia_modem_gpio_probe(dev);
if (err < 0) {
dev_err(dev, "Could not probe GPIOs\n");
goto error1;
}
}
ssip.name = "ssi-protocol";
ssip.tx_cfg = cl->tx_cfg;
ssip.rx_cfg = cl->rx_cfg;
ssip.platform_data = NULL;
ssip.archdata = NULL;
modem->ssi_protocol = hsi_new_client(port, &ssip);
if (!modem->ssi_protocol) {
dev_err(dev, "Could not register ssi-protocol device\n");
goto error2;
}
err = device_attach(&modem->ssi_protocol->device);
if (err == 0) {
dev_err(dev, "Missing ssi-protocol driver\n");
err = -EPROBE_DEFER;
goto error3;
} else if (err < 0) {
dev_err(dev, "Could not load ssi-protocol driver (%d)\n", err);
goto error3;
}
/* TODO: register cmt-speech hsi client */
dev_info(dev, "Registered Nokia HSI modem\n");
return 0;
error3:
hsi_remove_client(&modem->ssi_protocol->device, NULL);
error2:
nokia_modem_gpio_unexport(dev);
error1:
disable_irq_wake(modem->nokia_modem_rst_ind_irq);
tasklet_kill(&modem->nokia_modem_rst_ind_tasklet);
return err;
}
static int nokia_modem_remove(struct device *dev)
{
struct nokia_modem_device *modem = dev_get_drvdata(dev);
if (!modem)
return 0;
if (modem->ssi_protocol) {
hsi_remove_client(&modem->ssi_protocol->device, NULL);
modem->ssi_protocol = NULL;
}
nokia_modem_gpio_unexport(dev);
dev_set_drvdata(dev, NULL);
disable_irq_wake(modem->nokia_modem_rst_ind_irq);
tasklet_kill(&modem->nokia_modem_rst_ind_tasklet);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id nokia_modem_of_match[] = {
{ .compatible = "nokia,n900-modem", },
{},
};
MODULE_DEVICE_TABLE(of, nokia_modem_of_match);
#endif
static struct hsi_client_driver nokia_modem_driver = {
.driver = {
.name = "nokia-modem",
.owner = THIS_MODULE,
.probe = nokia_modem_probe,
.remove = nokia_modem_remove,
.of_match_table = of_match_ptr(nokia_modem_of_match),
},
};
static int __init nokia_modem_init(void)
{
return hsi_register_client_driver(&nokia_modem_driver);
}
module_init(nokia_modem_init);
static void __exit nokia_modem_exit(void)
{
hsi_unregister_client_driver(&nokia_modem_driver);
}
module_exit(nokia_modem_exit);
MODULE_ALIAS("hsi:nokia-modem");
MODULE_AUTHOR("Sebastian Reichel <sre@kernel.org>");
MODULE_DESCRIPTION("HSI driver module for Nokia N900 Modem");
MODULE_LICENSE("GPL");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment