Commit eb0bab38 authored by James Hogan's avatar James Hogan

MIPS: Add some missing guest CP0 accessors & defs

Add some missing guest accessors and register field definitions for KVM
for MIPS VZ to make use of.

Guest CP0_LLAddr register accessors and definitions for the LLB field
allow KVM to clear the guest LLB to cancel in-progress LL/SC atomics on
restore, and to emulate accesses by the guest to the CP0_LLAddr
register.

Bitwise modifiers and definitions for the guest CP0_Wired and
CP0_Config1 registers allow KVM to modify fields within the CP0_Wired
and CP0_Config1 registers.

Finally a definition for the CP0_Config5.SBRI bit allows KVM to
initialise and allow modification of the guest version of the SBRI bit.
Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
Acked-by: default avatarRalf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
parent a929bdc5
......@@ -219,8 +219,10 @@
/*
* Wired register bits
*/
#define MIPSR6_WIRED_LIMIT (_ULCAST_(0xffff) << 16)
#define MIPSR6_WIRED_WIRED (_ULCAST_(0xffff) << 0)
#define MIPSR6_WIRED_LIMIT_SHIFT 16
#define MIPSR6_WIRED_LIMIT (_ULCAST_(0xffff) << MIPSR6_WIRED_LIMIT_SHIFT)
#define MIPSR6_WIRED_WIRED_SHIFT 0
#define MIPSR6_WIRED_WIRED (_ULCAST_(0xffff) << MIPSR6_WIRED_WIRED_SHIFT)
/*
* Values used for computation of new tlb entries
......@@ -647,6 +649,7 @@
#define MIPS_CONF5_LLB (_ULCAST_(1) << 4)
#define MIPS_CONF5_MVH (_ULCAST_(1) << 5)
#define MIPS_CONF5_VP (_ULCAST_(1) << 7)
#define MIPS_CONF5_SBRI (_ULCAST_(1) << 6)
#define MIPS_CONF5_FRE (_ULCAST_(1) << 8)
#define MIPS_CONF5_UFE (_ULCAST_(1) << 9)
#define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27)
......@@ -742,6 +745,10 @@
#define MIPS_CMGCRB_BASE 11
#define MIPS_CMGCRF_BASE (~_ULCAST_((1 << MIPS_CMGCRB_BASE) - 1))
/* LLAddr bit definitions */
#define MIPS_LLADDR_LLB_SHIFT 0
#define MIPS_LLADDR_LLB (_ULCAST_(1) << MIPS_LLADDR_LLB_SHIFT)
/*
* Bits in the MIPS32 Memory Segmentation registers.
*/
......@@ -2018,6 +2025,9 @@ do { \
#define write_gc0_config6(val) __write_32bit_gc0_register(16, 6, val)
#define write_gc0_config7(val) __write_32bit_gc0_register(16, 7, val)
#define read_gc0_lladdr() __read_ulong_gc0_register(17, 0)
#define write_gc0_lladdr(val) __write_ulong_gc0_register(17, 0, val)
#define read_gc0_watchlo0() __read_ulong_gc0_register(18, 0)
#define read_gc0_watchlo1() __read_ulong_gc0_register(18, 1)
#define read_gc0_watchlo2() __read_ulong_gc0_register(18, 2)
......@@ -2702,9 +2712,11 @@ __BUILD_SET_C0(brcm_mode)
*/
#define __BUILD_SET_GC0(name) __BUILD_SET_COMMON(gc0_##name)
__BUILD_SET_GC0(wired)
__BUILD_SET_GC0(status)
__BUILD_SET_GC0(cause)
__BUILD_SET_GC0(ebase)
__BUILD_SET_GC0(config1)
/*
* Return low 10 bits of ebase.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment