Skip to content

L
linux
Commit eb4332ef authored by Ian Abbott's avatar Ian Abbott Committed by Greg Kroah-Hartman
Browse files
Options

staging: comedi: das1800: don't pass struct comedi_cmd by value 

Various functions in das1800.c take a `struct comedi_cmd` parameter by
value.  Change them to pass the parameter by reference instead.
Signed-off-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 44b255f7
Hide whitespace changes
Inline Side-by-side
Showing with 41 additions and 36 deletions
drivers/staging/comedi/drivers/das1800.c
View file @ eb4332ef
......@@ -958,14 +958,14 @@ static int das1800_ai_do_cmdtest(struct comedi_device *dev,
}
/* returns appropriate bits for control register a, depending on command */
static int control_a_bits(struct comedi_cmd cmd)
static int control_a_bits(const struct comedi_cmd *cmd)
{
int control_a;
control_a = FFEN; /* enable fifo */
if (cmd.stop_src == TRIG_EXT)
if (cmd->stop_src == TRIG_EXT)
control_a |= ATEN;
switch (cmd.start_src) {
switch (cmd->start_src) {
case TRIG_EXT:
control_a |= TGEN | CGSL;
break;
......@@ -980,7 +980,7 @@ static int control_a_bits(struct comedi_cmd cmd)
}
/* returns appropriate bits for control register c, depending on command */
static int control_c_bits(struct comedi_cmd cmd)
static int control_c_bits(const struct comedi_cmd *cmd)
{
int control_c;
int aref;
......@@ -988,18 +988,18 @@ static int control_c_bits(struct comedi_cmd cmd)
/* set clock source to internal or external, select analog reference,
* select unipolar / bipolar
*/
aref = CR_AREF(cmd.chanlist[0]);
aref = CR_AREF(cmd->chanlist[0]);
control_c = UQEN; /* enable upper qram addresses */
if (aref != AREF_DIFF)
control_c |= SD;
if (aref == AREF_COMMON)
control_c |= CMEN;
/* if a unipolar range was selected */
if (CR_RANGE(cmd.chanlist[0]) & UNIPOLAR)
if (CR_RANGE(cmd->chanlist[0]) & UNIPOLAR)
control_c |= UB;
switch (cmd.scan_begin_src) {
switch (cmd->scan_begin_src) {
case TRIG_FOLLOW: /* not in burst mode */
switch (cmd.convert_src) {
switch (cmd->convert_src) {
case TRIG_TIMER:
/* trig on cascaded counters */
control_c |= IPCLK;
......@@ -1047,29 +1047,33 @@ static int das1800_set_frequency(struct comedi_device *dev)
}
/* sets up counters */
static int setup_counters(struct comedi_device *dev, struct comedi_cmd cmd)
static int setup_counters(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
unsigned int period;
/* setup cascaded counters for conversion/scan frequency */
switch (cmd.scan_begin_src) {
switch (cmd->scan_begin_src) {
case TRIG_FOLLOW: /* not in burst mode */
if (cmd.convert_src == TRIG_TIMER) {
if (cmd->convert_src == TRIG_TIMER) {
/* set conversion frequency */
period = cmd->convert_arg;
i8253_cascade_ns_to_timer_2div(TIMER_BASE,
&(devpriv->divisor1),
&(devpriv->divisor2),
&(cmd.convert_arg),
cmd.
flags & TRIG_ROUND_MASK);
&devpriv->divisor1,
&devpriv->divisor2,
&period,
cmd->flags &
TRIG_ROUND_MASK);
if (das1800_set_frequency(dev) < 0)
return -1;
}
break;
case TRIG_TIMER: /* in burst mode */
/* set scan frequency */
i8253_cascade_ns_to_timer_2div(TIMER_BASE, &(devpriv->divisor1),
&(devpriv->divisor2),
&(cmd.scan_begin_arg),
cmd.flags & TRIG_ROUND_MASK);
period = cmd->scan_begin_arg;
i8253_cascade_ns_to_timer_2div(TIMER_BASE, &devpriv->divisor1,
&devpriv->divisor2, &period,
cmd->flags & TRIG_ROUND_MASK);
if (das1800_set_frequency(dev) < 0)
return -1;
break;
......@@ -1078,7 +1082,7 @@ static int setup_counters(struct comedi_device *dev, struct comedi_cmd cmd)
}
/* setup counter 0 for 'about triggering' */
if (cmd.stop_src == TRIG_EXT) {
if (cmd->stop_src == TRIG_EXT) {
/* load counter 0 in mode 0 */
i8254_load(dev->iobase + DAS1800_COUNTER, 0, 0, 1, 0);
}
......@@ -1087,7 +1091,7 @@ static int setup_counters(struct comedi_device *dev, struct comedi_cmd cmd)
}
/* utility function that suggests a dma transfer size based on the conversion period 'ns' */
static unsigned int suggest_transfer_size(struct comedi_cmd *cmd)
static unsigned int suggest_transfer_size(const struct comedi_cmd *cmd)
{
unsigned int size = DMA_BUF_SIZE;
static const int sample_size = 2; /* size in bytes of one sample from board */
......@@ -1125,7 +1129,7 @@ static unsigned int suggest_transfer_size(struct comedi_cmd *cmd)
}
/* sets up dma */
static void setup_dma(struct comedi_device *dev, struct comedi_cmd cmd)
static void setup_dma(struct comedi_device *dev, const struct comedi_cmd *cmd)
{
unsigned long lock_flags;
const int dual_dma = devpriv->irq_dma_bits & DMA_DUAL;
......@@ -1134,7 +1138,7 @@ static void setup_dma(struct comedi_device *dev, struct comedi_cmd cmd)
return;
/* determine a reasonable dma transfer size */
devpriv->dma_transfer_size = suggest_transfer_size(&cmd);
devpriv->dma_transfer_size = suggest_transfer_size(cmd);
lock_flags = claim_dma_lock();
disable_dma(devpriv->dma0);
/* clear flip-flop to make sure 2-byte registers for
......@@ -1163,14 +1167,15 @@ static void setup_dma(struct comedi_device *dev, struct comedi_cmd cmd)
}
/* programs channel/gain list into card */
static void program_chanlist(struct comedi_device *dev, struct comedi_cmd cmd)
static void program_chanlist(struct comedi_device *dev,
const struct comedi_cmd *cmd)
{
int i, n, chan_range;
unsigned long irq_flags;
const int range_mask = 0x3; /* masks unipolar/bipolar bit off range */
const int range_bitshift = 8;
n = cmd.chanlist_len;
n = cmd->chanlist_len;
/* spinlock protects indirect addressing */
spin_lock_irqsave(&dev->spinlock, irq_flags);
outb(QRAM, dev->iobase + DAS1800_SELECT); /* select QRAM for baseAddress + 0x0 */
......@@ -1178,9 +1183,9 @@ static void program_chanlist(struct comedi_device *dev, struct comedi_cmd cmd)
/* make channel / gain list */
for (i = 0; i < n; i++) {
chan_range =
CR_CHAN(cmd.
chanlist[i]) | ((CR_RANGE(cmd.chanlist[i]) &
range_mask) << range_bitshift);
CR_CHAN(cmd->chanlist[i]) |
((CR_RANGE(cmd->chanlist[i]) & range_mask) <<
range_bitshift);
outw(chan_range, dev->iobase + DAS1800_QRAM);
}
outb(n - 1, dev->iobase + DAS1800_QRAM_ADDRESS); /*finish write to QRAM */
......@@ -1196,7 +1201,7 @@ static int das1800_ai_do_cmd(struct comedi_device *dev,
int ret;
int control_a, control_c;
struct comedi_async *async = s->async;
struct comedi_cmd cmd = async->cmd;
const struct comedi_cmd *cmd = &async->cmd;
if (!dev->irq) {
comedi_error(dev,
......@@ -1206,12 +1211,12 @@ static int das1800_ai_do_cmd(struct comedi_device *dev,
/* disable dma on TRIG_WAKE_EOS, or TRIG_RT
* (because dma in handler is unsafe at hard real-time priority) */
if (cmd.flags & (TRIG_WAKE_EOS | TRIG_RT))
if (cmd->flags & (TRIG_WAKE_EOS | TRIG_RT))
devpriv->irq_dma_bits &= ~DMA_ENABLED;
else
devpriv->irq_dma_bits |= devpriv->dma_bits;
/* interrupt on end of conversion for TRIG_WAKE_EOS */
if (cmd.flags & TRIG_WAKE_EOS) {
if (cmd->flags & TRIG_WAKE_EOS) {
/* interrupt fifo not empty */
devpriv->irq_dma_bits &= ~FIMD;
} else {
......@@ -1219,8 +1224,8 @@ static int das1800_ai_do_cmd(struct comedi_device *dev,
devpriv->irq_dma_bits |= FIMD;
}
/* determine how many conversions we need */
if (cmd.stop_src == TRIG_COUNT)
devpriv->count = cmd.stop_arg * cmd.chanlist_len;
if (cmd->stop_src == TRIG_COUNT)
devpriv->count = cmd->stop_arg * cmd->chanlist_len;
das1800_cancel(dev, s);
......@@ -1240,9 +1245,9 @@ static int das1800_ai_do_cmd(struct comedi_device *dev,
/* set conversion rate and length for burst mode */
if (control_c & BMDE) {
/* program conversion period with number of microseconds minus 1 */
outb(cmd.convert_arg / 1000 - 1,
outb(cmd->convert_arg / 1000 - 1,
dev->iobase + DAS1800_BURST_RATE);
outb(cmd.chanlist_len - 1, dev->iobase + DAS1800_BURST_LENGTH);
outb(cmd->chanlist_len - 1, dev->iobase + DAS1800_BURST_LENGTH);
}
outb(devpriv->irq_dma_bits, dev->iobase + DAS1800_CONTROL_B); /* enable irq/dma */
outb(control_a, dev->iobase + DAS1800_CONTROL_A); /* enable fifo and triggering */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7