Commit eb546195 authored by Heiko Carstens's avatar Heiko Carstens Committed by Martin Schwidefsky

s390/sigp: use sigp order code defines in assembly code

Use sigp order code defines in assembly code as well.
With this change all places that use sigp constants should
have been converted to use self describing defines instead
of directly using constants.
Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
parent a095a8a9
......@@ -9,6 +9,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/ptrace.h>
#include <asm/sigp.h>
#ifdef CONFIG_64BIT
......@@ -100,7 +101,7 @@ ENTRY(diag308_reset)
.Lrestart_part2:
lhi %r0,0 # Load r0 with zero
lhi %r1,2 # Use mode 2 = ESAME (dump)
sigp %r1,%r0,0x12 # Switch to ESAME mode
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode
sam64 # Switch to 64 bit addressing mode
larl %r4,.Lctlregs # Restore control registers
lctlg %c0,%c15,0(%r4)
......
......@@ -18,6 +18,7 @@
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/page.h>
#include <asm/sigp.h>
__PT_R0 = __PT_GPRS
__PT_R1 = __PT_GPRS + 4
......@@ -726,12 +727,12 @@ ENTRY(restart_int_handler)
lm %r1,%r3,__LC_RESTART_FN # load fn, parm & source cpu
ltr %r3,%r3 # test source cpu address
jm 1f # negative -> skip source stop
0: sigp %r4,%r3,1 # sigp sense to source cpu
0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu
brc 10,0b # wait for status stored
1: basr %r14,%r1 # call function
stap __SF_EMPTY(%r15) # store cpu address
lh %r3,__SF_EMPTY(%r15)
2: sigp %r4,%r3,5 # sigp stop to current cpu
2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu
brc 2,2b
3: j 3b
......
......@@ -18,6 +18,7 @@
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/page.h>
#include <asm/sigp.h>
__PT_R0 = __PT_GPRS
__PT_R1 = __PT_GPRS + 8
......@@ -753,12 +754,12 @@ ENTRY(restart_int_handler)
lmg %r1,%r3,__LC_RESTART_FN # load fn, parm & source cpu
ltgr %r3,%r3 # test source cpu address
jm 1f # negative -> skip source stop
0: sigp %r4,%r3,1 # sigp sense to source cpu
0: sigp %r4,%r3,SIGP_SENSE # sigp sense to source cpu
brc 10,0b # wait for status stored
1: basr %r14,%r1 # call function
stap __SF_EMPTY(%r15) # store cpu address
llgh %r3,__SF_EMPTY(%r15)
2: sigp %r4,%r3,5 # sigp stop to current cpu
2: sigp %r4,%r3,SIGP_STOP # sigp stop to current cpu
brc 2,2b
3: j 3b
......
......@@ -5,6 +5,8 @@
* Author(s): Michael Holzheu <holzheu@linux.vnet.ibm.com>
*/
#include <asm/sigp.h>
#define DATAMOVER_ADDR 0x4000
#define COPY_PAGE_ADDR 0x6000
......@@ -19,7 +21,7 @@
.align 2
.Lep_startup_kdump:
lhi %r1,2 # mode 2 = esame (dump)
sigp %r1,%r0,0x12 # Switch to esame mode
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to esame mode
sam64 # Switch to 64 bit addressing
basr %r13,0
.Lbase:
......@@ -88,7 +90,7 @@ startup_kdump_relocated:
sam31 # Switch to 31 bit addr mode
sr %r1,%r1 # Erase register r1
sr %r2,%r2 # Erase register r2
sigp %r1,%r2,0x12 # Switch to 31 bit arch mode
sigp %r1,%r2,SIGP_SET_ARCHITECTURE # Switch to 31 bit arch mode
lpsw 0 # Start new kernel...
.align 8
.Lrestart_psw:
......
......@@ -8,6 +8,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/sigp.h>
#
# store_status: Empty implementation until kdump is supported on 31 bit
......@@ -60,7 +61,7 @@ ENTRY(do_reipl_asm)
bas %r14,.Ldisab-.Lpg0(%r13)
.L003: st %r1,__LC_SUBCHANNEL_ID
lpsw 0
sigp 0,0,0(6)
sigp 0,0,SIGP_RESTART
.Ldisab: st %r14,.Ldispsw+4-.Lpg0(%r13)
lpsw .Ldispsw-.Lpg0(%r13)
.align 8
......
......@@ -6,6 +6,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/sigp.h>
#
# store_status
......@@ -106,7 +107,7 @@ ENTRY(do_reipl_asm)
.L003: st %r1,__LC_SUBCHANNEL_ID
lhi %r1,0 # mode 0 = esa
slr %r0,%r0 # set cpuid to zero
sigp %r1,%r0,0x12 # switch to esa mode
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # switch to esa mode
lpsw 0
.Ldisab: sll %r14,1
srl %r14,1 # need to kill hi bit to avoid specification exceptions.
......
......@@ -9,6 +9,7 @@
*/
#include <linux/linkage.h>
#include <asm/sigp.h>
/*
* moves the new kernel to its destination...
......@@ -93,7 +94,7 @@ ENTRY(relocate_kernel)
.no_diag308:
sr %r1,%r1 # clear %r1
sr %r2,%r2 # clear %r2
sigp %r1,%r2,0x12 # set cpuid to zero
sigp %r1,%r2,SIGP_SET_ARCHITECTURE # set cpuid to zero
lpsw 0 # hopefully start new kernel...
.align 8
......
......@@ -9,6 +9,7 @@
*/
#include <linux/linkage.h>
#include <asm/sigp.h>
/*
* moves the new kernel to its destination...
......@@ -45,7 +46,7 @@ ENTRY(relocate_kernel)
diag %r0,%r0,0x308
.back:
lhi %r1,1 # mode 1 = esame
sigp %r1,%r0,0x12 # switch to esame mode
sigp %r1,%r0,SIGP_SET_ARCHITECTURE # switch to esame mode
sam64 # switch to 64 bit addressing mode
basr %r13,0
.back_base:
......@@ -96,7 +97,7 @@ ENTRY(relocate_kernel)
sam31 # 31 bit mode
sr %r1,%r1 # erase register r1
sr %r2,%r2 # erase register r2
sigp %r1,%r2,0x12 # set cpuid to zero
sigp %r1,%r2,SIGP_SET_ARCHITECTURE # set cpuid to zero
lpsw 0 # hopefully start new kernel...
.align 8
......
......@@ -288,11 +288,13 @@ static void pcpu_delegate(struct pcpu *pcpu, void (*func)(void *),
/* Restart func on the target cpu and stop the current cpu. */
memcpy_absolute(&lc->restart_stack, &restart, sizeof(restart));
asm volatile(
"0: sigp 0,%0,6 # sigp restart to target cpu\n"
"0: sigp 0,%0,%2 # sigp restart to target cpu\n"
" brc 2,0b # busy, try again\n"
"1: sigp 0,%1,5 # sigp stop to current cpu\n"
"1: sigp 0,%1,%3 # sigp stop to current cpu\n"
" brc 2,1b # busy, try again\n"
: : "d" (pcpu->address), "d" (restart.source) : "0", "1", "cc");
: : "d" (pcpu->address), "d" (restart.source),
"K" (SIGP_RESTART), "K" (SIGP_STOP)
: "0", "1", "cc");
for (;;) ;
}
......
......@@ -12,6 +12,7 @@
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/sigp.h>
/*
* Save register context in absolute 0 lowcore and call swsusp_save() to
......@@ -163,7 +164,7 @@ ENTRY(swsusp_arch_resume)
diag %r0,%r0,0x308
restart_entry:
lhi %r1,1
sigp %r1,%r0,0x12
sigp %r1,%r0,SIGP_SET_ARCHITECTURE
sam64
larl %r1,.Lnew_pgm_check_psw
lpswe 0(%r1)
......@@ -179,7 +180,7 @@ pgm_check_entry:
larl %r4,.Lrestart_suspend_psw /* Set new restart PSW */
mvc __LC_RST_NEW_PSW(16,%r0),0(%r4)
3:
sigp %r9,%r1,11 /* sigp initial cpu reset */
sigp %r9,%r1,SIGP_INITIAL_CPU_RESET /* sigp initial cpu reset */
brc 8,4f /* accepted */
brc 2,3b /* busy, try again */
......@@ -190,16 +191,16 @@ pgm_check_entry:
larl %r3,_sclp_print_early
lghi %r1,0
sam31
sigp %r1,%r0,0x12
sigp %r1,%r0,SIGP_SET_ARCHITECTURE
basr %r14,%r3
larl %r3,.Ldisabled_wait_31
lpsw 0(%r3)
4:
/* Switch to suspend CPU */
sigp %r9,%r1,6 /* sigp restart to suspend CPU */
sigp %r9,%r1,SIGP_RESTART /* sigp restart to suspend CPU */
brc 2,4b /* busy, try again */
5:
sigp %r9,%r2,5 /* sigp stop to current resume CPU */
sigp %r9,%r2,SIGP_STOP /* sigp stop to current resume CPU */
brc 2,5b /* busy, try again */
6: j 6b
......@@ -207,7 +208,7 @@ restart_suspend:
larl %r1,.Lresume_cpu
llgh %r2,0(%r1)
7:
sigp %r9,%r2,1 /* sigp sense, wait for resume CPU */
sigp %r9,%r2,SIGP_SENSE /* sigp sense, wait for resume CPU */
brc 8,7b /* accepted, status 0, still running */
brc 2,7b /* busy, try again */
tmll %r9,0x40 /* Test if resume CPU is stopped */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment