Commit eb8b8f2e authored by Barry Song's avatar Barry Song Committed by Mike Turquette

clk: prima2: enable dt-binding clkdev mapping

this patche deletes hard code that registers clkdev by things like:
clk_register_clkdev(clk, NULL, "b0030000.nand");
clk_register_clkdev(clk, NULL, "b0040000.audio");
clk_register_clkdev(clk, NULL, "b0080000.usp");
prima2 clock controller becomes a clock provider and  every dt node
just declares its clock sources by dt prop.

it also makes us easier to extend this driver to support both prima2
and marco as marco has different address mapping with prima2.
Signed-off-by: default avatarBarry Song <Baohua.Song@csr.com>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent 38a8b096
* Clock bindings for CSR SiRFprimaII
Required properties:
- compatible: Should be "sirf,prima2-clkc"
- reg: Address and length of the register set
- interrupts: Should contain clock controller interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of prima2
clocks and IDs.
Clock ID
---------------------------
rtc 0
osc 1
pll1 2
pll2 3
pll3 4
mem 5
sys 6
security 7
dsp 8
gps 9
mf 10
io 11
cpu 12
uart0 13
uart1 14
uart2 15
tsc 16
i2c0 17
i2c1 18
spi0 19
spi1 20
pwmc 21
efuse 22
pulse 23
dmac0 24
dmac1 25
nand 26
audio 27
usp0 28
usp1 29
usp2 30
vip 31
gfx 32
mm 33
lcd 34
vpp 35
mmc01 36
mmc23 37
mmc45 38
usbpll 39
usb0 40
usb1 41
Examples:
clks: clock-controller@88000000 {
compatible = "sirf,prima2-clkc";
reg = <0x88000000 0x1000>;
interrupts = <3>;
#clock-cells = <1>;
};
i2c0: i2c@b00e0000 {
cell-index = <0>;
compatible = "sirf,prima2-i2c";
reg = <0xb00e0000 0x10000>;
interrupts = <24>;
clocks = <&clks 17>;
};
......@@ -58,10 +58,11 @@ sys-iobg {
#size-cells = <1>;
ranges = <0x88000000 0x88000000 0x40000>;
clock-controller@88000000 {
clks: clock-controller@88000000 {
compatible = "sirf,prima2-clkc";
reg = <0x88000000 0x1000>;
interrupts = <3>;
#clock-cells = <1>;
};
reset-controller@88010000 {
......@@ -85,6 +86,7 @@ memory-controller@90000000 {
compatible = "sirf,prima2-memc";
reg = <0x90000000 0x10000>;
interrupts = <27>;
clocks = <&clks 5>;
};
};
......@@ -104,6 +106,7 @@ vpp@90020000 {
compatible = "sirf,prima2-vpp";
reg = <0x90020000 0x10000>;
interrupts = <31>;
clocks = <&clks 35>;
};
};
......@@ -117,6 +120,7 @@ graphics@98000000 {
compatible = "powervr,sgx531";
reg = <0x98000000 0x8000000>;
interrupts = <6>;
clocks = <&clks 32>;
};
};
......@@ -130,6 +134,7 @@ multimedia@a0000000 {
compatible = "sirf,prima2-video-codec";
reg = <0xa0000000 0x8000000>;
interrupts = <5>;
clocks = <&clks 33>;
};
};
......@@ -149,12 +154,14 @@ gps@a8010000 {
compatible = "sirf,prima2-gps";
reg = <0xa8010000 0x10000>;
interrupts = <7>;
clocks = <&clks 9>;
};
dsp@a9000000 {
compatible = "sirf,prima2-dsp";
reg = <0xa9000000 0x1000000>;
interrupts = <8>;
clocks = <&clks 8>;
};
};
......@@ -174,12 +181,14 @@ nand@b0030000 {
compatible = "sirf,prima2-nand";
reg = <0xb0030000 0x10000>;
interrupts = <41>;
clocks = <&clks 26>;
};
audio@b0040000 {
compatible = "sirf,prima2-audio";
reg = <0xb0040000 0x10000>;
interrupts = <35>;
clocks = <&clks 27>;
};
uart0: uart@b0050000 {
......@@ -187,6 +196,7 @@ uart0: uart@b0050000 {
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x10000>;
interrupts = <17>;
clocks = <&clks 13>;
};
uart1: uart@b0060000 {
......@@ -194,6 +204,7 @@ uart1: uart@b0060000 {
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x10000>;
interrupts = <18>;
clocks = <&clks 14>;
};
uart2: uart@b0070000 {
......@@ -201,6 +212,7 @@ uart2: uart@b0070000 {
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x10000>;
interrupts = <19>;
clocks = <&clks 15>;
};
usp0: usp@b0080000 {
......@@ -208,6 +220,7 @@ usp0: usp@b0080000 {
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
clocks = <&clks 28>;
};
usp1: usp@b0090000 {
......@@ -215,6 +228,7 @@ usp1: usp@b0090000 {
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
clocks = <&clks 29>;
};
usp2: usp@b00a0000 {
......@@ -222,6 +236,7 @@ usp2: usp@b00a0000 {
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
clocks = <&clks 30>;
};
dmac0: dma-controller@b00b0000 {
......@@ -229,6 +244,7 @@ dmac0: dma-controller@b00b0000 {
compatible = "sirf,prima2-dmac";
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
clocks = <&clks 24>;
};
dmac1: dma-controller@b0160000 {
......@@ -236,11 +252,13 @@ dmac1: dma-controller@b0160000 {
compatible = "sirf,prima2-dmac";
reg = <0xb0160000 0x10000>;
interrupts = <13>;
clocks = <&clks 25>;
};
vip@b00C0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
clocks = <&clks 31>;
};
spi0: spi@b00d0000 {
......@@ -248,6 +266,7 @@ spi0: spi@b00d0000 {
compatible = "sirf,prima2-spi";
reg = <0xb00d0000 0x10000>;
interrupts = <15>;
clocks = <&clks 19>;
};
spi1: spi@b0170000 {
......@@ -255,6 +274,7 @@ spi1: spi@b0170000 {
compatible = "sirf,prima2-spi";
reg = <0xb0170000 0x10000>;
interrupts = <16>;
clocks = <&clks 20>;
};
i2c0: i2c@b00e0000 {
......@@ -262,6 +282,7 @@ i2c0: i2c@b00e0000 {
compatible = "sirf,prima2-i2c";
reg = <0xb00e0000 0x10000>;
interrupts = <24>;
clocks = <&clks 17>;
};
i2c1: i2c@b00f0000 {
......@@ -269,12 +290,14 @@ i2c1: i2c@b00f0000 {
compatible = "sirf,prima2-i2c";
reg = <0xb00f0000 0x10000>;
interrupts = <25>;
clocks = <&clks 18>;
};
tsc@b0110000 {
compatible = "sirf,prima2-tsc";
reg = <0xb0110000 0x10000>;
interrupts = <33>;
clocks = <&clks 16>;
};
gpio: pinctrl@b0120000 {
......@@ -507,17 +530,20 @@ cko1_rst {
pwm@b0130000 {
compatible = "sirf,prima2-pwm";
reg = <0xb0130000 0x10000>;
clocks = <&clks 21>;
};
efusesys@b0140000 {
compatible = "sirf,prima2-efuse";
reg = <0xb0140000 0x10000>;
clocks = <&clks 22>;
};
pulsec@b0150000 {
compatible = "sirf,prima2-pulsec";
reg = <0xb0150000 0x10000>;
interrupts = <48>;
clocks = <&clks 23>;
};
pci-iobg {
......@@ -616,12 +642,14 @@ usb0: usb@b00e0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8000000 0x10000>;
interrupts = <10>;
clocks = <&clks 40>;
};
usb1: usb@b00f0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8010000 0x10000>;
interrupts = <11>;
clocks = <&clks 41>;
};
sata@b00f0000 {
......@@ -634,6 +662,7 @@ security@b00f0000 {
compatible = "sirf,prima2-security";
reg = <0xb8030000 0x10000>;
interrupts = <42>;
clocks = <&clks 7>;
};
};
};
......
......@@ -1025,20 +1025,67 @@ static struct of_device_id rsc_ids[] = {
{},
};
enum prima2_clk_index {
/* 0 1 2 3 4 5 6 7 8 9 */
rtc, osc, pll1, pll2, pll3, mem, sys, security, dsp, gps,
mf, io, cpu, uart0, uart1, uart2, tsc, i2c0, i2c1, spi0,
spi1, pwmc, efuse, pulse, dmac0, dmac1, nand, audio, usp0, usp1,
usp2, vip, gfx, mm, lcd, vpp, mmc01, mmc23, mmc45, usbpll,
usb0, usb1, maxclk,
};
static __initdata struct clk_hw* prima2_clk_hw_array[maxclk] = {
NULL, /* dummy */
NULL,
&clk_pll1.hw,
&clk_pll2.hw,
&clk_pll3.hw,
&clk_mem.hw,
&clk_sys.hw,
&clk_security.hw,
&clk_dsp.hw,
&clk_gps.hw,
&clk_mf.hw,
&clk_io.hw,
&clk_cpu.hw,
&clk_uart0.hw,
&clk_uart1.hw,
&clk_uart2.hw,
&clk_tsc.hw,
&clk_i2c0.hw,
&clk_i2c1.hw,
&clk_spi0.hw,
&clk_spi1.hw,
&clk_pwmc.hw,
&clk_efuse.hw,
&clk_pulse.hw,
&clk_dmac0.hw,
&clk_dmac1.hw,
&clk_nand.hw,
&clk_audio.hw,
&clk_usp0.hw,
&clk_usp1.hw,
&clk_usp2.hw,
&clk_vip.hw,
&clk_gfx.hw,
&clk_mm.hw,
&clk_lcd.hw,
&clk_vpp.hw,
&clk_mmc01.hw,
&clk_mmc23.hw,
&clk_mmc45.hw,
&usb_pll_clk_hw,
&clk_usb0.hw,
&clk_usb1.hw,
};
static struct clk *prima2_clks[maxclk];
static struct clk_onecell_data clk_data;
void __init sirfsoc_of_clk_init(void)
{
struct clk *clk;
struct device_node *np;
np = of_find_matching_node(NULL, clkc_ids);
if (!np)
panic("unable to find compatible clkc node in dtb\n");
sirfsoc_clk_vbase = of_iomap(np, 0);
if (!sirfsoc_clk_vbase)
panic("unable to map clkc registers\n");
of_node_put(np);
int i;
np = of_find_matching_node(NULL, rsc_ids);
if (!np)
......@@ -1050,122 +1097,30 @@ void __init sirfsoc_of_clk_init(void)
of_node_put(np);
np = of_find_matching_node(NULL, clkc_ids);
if (!np)
return;
sirfsoc_clk_vbase = of_iomap(np, 0);
if (!sirfsoc_clk_vbase)
panic("unable to map clkc registers\n");
/* These are always available (RTC and 26MHz OSC)*/
clk = clk_register_fixed_rate(NULL, "rtc", NULL,
prima2_clks[rtc] = clk_register_fixed_rate(NULL, "rtc", NULL,
CLK_IS_ROOT, 32768);
BUG_ON(IS_ERR(clk));
clk = clk_register_fixed_rate(NULL, "osc", NULL,
prima2_clks[osc]= clk_register_fixed_rate(NULL, "osc", NULL,
CLK_IS_ROOT, 26000000);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_pll1.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_pll2.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_pll3.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_mem.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_sys.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_security.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b8030000.security");
clk = clk_register(NULL, &clk_dsp.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_gps.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "a8010000.gps");
clk = clk_register(NULL, &clk_mf.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_io.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "io");
clk = clk_register(NULL, &clk_cpu.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "cpu");
clk = clk_register(NULL, &clk_uart0.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0050000.uart");
clk = clk_register(NULL, &clk_uart1.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0060000.uart");
clk = clk_register(NULL, &clk_uart2.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0070000.uart");
clk = clk_register(NULL, &clk_tsc.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0110000.tsc");
clk = clk_register(NULL, &clk_i2c0.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00e0000.i2c");
clk = clk_register(NULL, &clk_i2c1.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00f0000.i2c");
clk = clk_register(NULL, &clk_spi0.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00d0000.spi");
clk = clk_register(NULL, &clk_spi1.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0170000.spi");
clk = clk_register(NULL, &clk_pwmc.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0130000.pwm");
clk = clk_register(NULL, &clk_efuse.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0140000.efusesys");
clk = clk_register(NULL, &clk_pulse.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0150000.pulsec");
clk = clk_register(NULL, &clk_dmac0.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00b0000.dma-controller");
clk = clk_register(NULL, &clk_dmac1.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0160000.dma-controller");
clk = clk_register(NULL, &clk_nand.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0030000.nand");
clk = clk_register(NULL, &clk_audio.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0040000.audio");
clk = clk_register(NULL, &clk_usp0.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0080000.usp");
clk = clk_register(NULL, &clk_usp1.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b0090000.usp");
clk = clk_register(NULL, &clk_usp2.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00a0000.usp");
clk = clk_register(NULL, &clk_vip.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00c0000.vip");
clk = clk_register(NULL, &clk_gfx.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "98000000.graphics");
clk = clk_register(NULL, &clk_mm.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "a0000000.multimedia");
clk = clk_register(NULL, &clk_lcd.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "90010000.display");
clk = clk_register(NULL, &clk_vpp.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "90020000.vpp");
clk = clk_register(NULL, &clk_mmc01.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_mmc23.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_mmc45.hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &usb_pll_clk_hw);
BUG_ON(IS_ERR(clk));
clk = clk_register(NULL, &clk_usb0.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00e0000.usb");
clk = clk_register(NULL, &clk_usb1.hw);
BUG_ON(IS_ERR(clk));
clk_register_clkdev(clk, NULL, "b00f0000.usb");
for (i = pll1; i < maxclk; i++) {
prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
BUG_ON(!prima2_clks[i]);
}
clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
clk_register_clkdev(prima2_clks[io], NULL, "io");
clk_register_clkdev(prima2_clks[mem], NULL, "mem");
clk_data.clks = prima2_clks;
clk_data.clk_num = maxclk;
of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment