drm/i915/dp_aux_backlight: use struct drm_device based logging

Convert all the DRM_* logging macros to the struct drm_device based
macros to provide device specific logging.

No functional changes.

Generated using the following semantic patch, originally written by
Wambui Karuga <wambui.karugax@gmail.com>, with manual fixups on top:

@@
identifier fn, T;
@@

fn(...,struct drm_i915_private *T,...) {
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

@@
identifier fn, T;
@@

fn(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-DRM_INFO(
+drm_info(&T->drm,
...)
|
-DRM_NOTE(
+drm_notice(&T->drm,
...)
|
-DRM_ERROR(
+drm_err(&T->drm,
...)
|
-DRM_WARN(
+drm_warn(&T->drm,
...)
|
-DRM_DEBUG_DRIVER(
+drm_dbg(&T->drm,
...)
|
-DRM_DEBUG_KMS(
+drm_dbg_kms(&T->drm,
...)
|
-DRM_DEBUG_ATOMIC(
+drm_dbg_atomic(&T->drm,
...)
)
...+>
}

Cc: Wambui Karuga <wambui.karugax@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/733d3032e61cb4892a516d5be5da5ec73bdb9fa1.1584714939.git.jani.nikula@intel.com

drivers/gpu/drm/i915/display/intel_dp_aux_backlight.c

@@ -27,6 +27,7 @@
 
 static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 {
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 reg_val = 0;
 
 	/* Early return when display use other mechanism to enable backlight. */
@@ -35,8 +36,8 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
 			      &reg_val) < 0) {
-		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
-			      DP_EDP_DISPLAY_CONTROL_REGISTER);
+		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
+			    DP_EDP_DISPLAY_CONTROL_REGISTER);
 		return;
 	}
 	if (enable)
@@ -46,8 +47,8 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 
 	if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_EDP_DISPLAY_CONTROL_REGISTER,
 			       reg_val) != 1) {
-		DRM_DEBUG_KMS("Failed to %s aux backlight\n",
-			      enable ? "enable" : "disable");
+		drm_dbg_kms(&i915->drm, "Failed to %s aux backlight\n",
+			    enable ? "enable" : "disable");
 	}
 }
 
@@ -58,6 +59,7 @@ static void set_aux_backlight_enable(struct intel_dp *intel_dp, bool enable)
 static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 read_val[2] = { 0x0 };
 	u8 mode_reg;
 	u16 level = 0;
@@ -65,8 +67,9 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER,
 			      &mode_reg) != 1) {
-		DRM_DEBUG_KMS("Failed to read the DPCD register 0x%x\n",
-			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+		drm_dbg_kms(&i915->drm,
+			    "Failed to read the DPCD register 0x%x\n",
+			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
 		return 0;
 	}
 
@@ -80,8 +83,8 @@ static u32 intel_dp_aux_get_backlight(struct intel_connector *connector)
 
 	if (drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
 			     &read_val, sizeof(read_val)) < 0) {
-		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
-			      DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
+		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
+			    DP_EDP_BACKLIGHT_BRIGHTNESS_MSB);
 		return 0;
 	}
 	level = read_val[0];
@@ -100,6 +103,7 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	u8 vals[2] = { 0x0 };
 
 	vals[0] = level;
@@ -111,7 +115,8 @@ intel_dp_aux_set_backlight(const struct drm_connector_state *conn_state, u32 lev
 	}
 	if (drm_dp_dpcd_write(&intel_dp->aux, DP_EDP_BACKLIGHT_BRIGHTNESS_MSB,
 			      vals, sizeof(vals)) < 0) {
-		DRM_DEBUG_KMS("Failed to write aux backlight level\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to write aux backlight level\n");
 		return;
 	}
 }
@@ -133,7 +138,8 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
 
 	freq = dev_priv->vbt.backlight.pwm_freq_hz;
 	if (!freq) {
-		DRM_DEBUG_KMS("Use panel default backlight frequency\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Use panel default backlight frequency\n");
 		return false;
 	}
 
@@ -146,13 +152,14 @@ static bool intel_dp_aux_set_pwm_freq(struct intel_connector *connector)
 	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
 
 	if (fxp_min > fxp_actual || fxp_actual > fxp_max) {
-		DRM_DEBUG_KMS("Actual frequency out of range\n");
+		drm_dbg_kms(&dev_priv->drm, "Actual frequency out of range\n");
 		return false;
 	}
 
 	if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			       DP_EDP_BACKLIGHT_FREQ_SET, (u8) f) < 0) {
-		DRM_DEBUG_KMS("Failed to write aux backlight freq\n");
+		drm_dbg_kms(&dev_priv->drm,
+			    "Failed to write aux backlight freq\n");
 		return false;
 	}
 	return true;
@@ -163,13 +170,14 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
 {
 	struct intel_connector *connector = to_intel_connector(conn_state->connector);
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	struct intel_panel *panel = &connector->panel;
 	u8 dpcd_buf, new_dpcd_buf, edp_backlight_mode;
 
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, &dpcd_buf) != 1) {
-		DRM_DEBUG_KMS("Failed to read DPCD register 0x%x\n",
-			      DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
+		drm_dbg_kms(&i915->drm, "Failed to read DPCD register 0x%x\n",
+			    DP_EDP_BACKLIGHT_MODE_SET_REGISTER);
 		return;
 	}
 
@@ -186,7 +194,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
 		if (drm_dp_dpcd_writeb(&intel_dp->aux,
 				       DP_EDP_PWMGEN_BIT_COUNT,
 				       panel->backlight.pwmgen_bit_count) < 0)
-			DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
+			drm_dbg_kms(&i915->drm,
+				    "Failed to write aux pwmgen bit count\n");
 
 		break;
 
@@ -203,7 +212,8 @@ static void intel_dp_aux_enable_backlight(const struct intel_crtc_state *crtc_st
 	if (new_dpcd_buf != dpcd_buf) {
 		if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			DP_EDP_BACKLIGHT_MODE_SET_REGISTER, new_dpcd_buf) < 0) {
-			DRM_DEBUG_KMS("Failed to write aux backlight mode\n");
+			drm_dbg_kms(&i915->drm,
+				    "Failed to write aux backlight mode\n");
 		}
 	}
 
@@ -237,9 +247,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 	 * minimum value will applied automatically. So no need to check that.
 	 */
 	freq = i915->vbt.backlight.pwm_freq_hz;
-	DRM_DEBUG_KMS("VBT defined backlight frequency %u Hz\n", freq);
+	drm_dbg_kms(&i915->drm, "VBT defined backlight frequency %u Hz\n",
+		    freq);
 	if (!freq) {
-		DRM_DEBUG_KMS("Use panel default backlight frequency\n");
+		drm_dbg_kms(&i915->drm,
+			    "Use panel default backlight frequency\n");
 		return max_backlight;
 	}
 
@@ -254,12 +266,14 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 	 */
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MIN, &pn_min) != 1) {
-		DRM_DEBUG_KMS("Failed to read pwmgen bit count cap min\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to read pwmgen bit count cap min\n");
 		return max_backlight;
 	}
 	if (drm_dp_dpcd_readb(&intel_dp->aux,
 			      DP_EDP_PWMGEN_BIT_COUNT_CAP_MAX, &pn_max) != 1) {
-		DRM_DEBUG_KMS("Failed to read pwmgen bit count cap max\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to read pwmgen bit count cap max\n");
 		return max_backlight;
 	}
 	pn_min &= DP_EDP_PWMGEN_BIT_COUNT_MASK;
@@ -268,7 +282,8 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 	fxp_min = DIV_ROUND_CLOSEST(fxp * 3, 4);
 	fxp_max = DIV_ROUND_CLOSEST(fxp * 5, 4);
 	if (fxp_min < (1 << pn_min) || (255 << pn_max) < fxp_max) {
-		DRM_DEBUG_KMS("VBT defined backlight frequency out of range\n");
+		drm_dbg_kms(&i915->drm,
+			    "VBT defined backlight frequency out of range\n");
 		return max_backlight;
 	}
 
@@ -279,10 +294,11 @@ static u32 intel_dp_aux_calc_max_backlight(struct intel_connector *connector)
 			break;
 	}
 
-	DRM_DEBUG_KMS("Using eDP pwmgen bit count of %d\n", pn);
+	drm_dbg_kms(&i915->drm, "Using eDP pwmgen bit count of %d\n", pn);
 	if (drm_dp_dpcd_writeb(&intel_dp->aux,
 			       DP_EDP_PWMGEN_BIT_COUNT, pn) < 0) {
-		DRM_DEBUG_KMS("Failed to write aux pwmgen bit count\n");
+		drm_dbg_kms(&i915->drm,
+			    "Failed to write aux pwmgen bit count\n");
 		return max_backlight;
 	}
 	panel->backlight.pwmgen_bit_count = pn;
@@ -312,6 +328,7 @@ static bool
 intel_dp_aux_display_control_capable(struct intel_connector *connector)
 {
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	/* Check the eDP Display control capabilities registers to determine if
 	 * the panel can support backlight control over the aux channel
@@ -319,7 +336,7 @@ intel_dp_aux_display_control_capable(struct intel_connector *connector)
 	if (intel_dp->edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP &&
 	    (intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP) &&
 	    !(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) {
-		DRM_DEBUG_KMS("AUX Backlight Control Supported!\n");
+		drm_dbg_kms(&i915->drm, "AUX Backlight Control Supported!\n");
 		return true;
 	}
 	return false;
@@ -329,8 +346,7 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 {
 	struct intel_panel *panel = &intel_connector->panel;
 	struct intel_dp *intel_dp = enc_to_intel_dp(intel_connector->encoder);
-	struct drm_device *dev = intel_connector->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 
 	if (i915_modparams.enable_dpcd_backlight == 0 ||
 	    !intel_dp_aux_display_control_capable(intel_connector))
@@ -340,17 +356,17 @@ int intel_dp_aux_init_backlight_funcs(struct intel_connector *intel_connector)
 	 * There are a lot of machines that don't advertise the backlight
 	 * control interface to use properly in their VBIOS, :\
 	 */
-	if (dev_priv->vbt.backlight.type !=
+	if (i915->vbt.backlight.type !=
 	    INTEL_BACKLIGHT_VESA_EDP_AUX_INTERFACE &&
 	    !drm_dp_has_quirk(&intel_dp->desc, intel_dp->edid_quirks,
 			      DP_QUIRK_FORCE_DPCD_BACKLIGHT)) {
-		DRM_DEV_INFO(dev->dev,
-			     "Panel advertises DPCD backlight support, but "
-			     "VBT disagrees. If your backlight controls "
-			     "don't work try booting with "
-			     "i915.enable_dpcd_backlight=1. If your machine "
-			     "needs this, please file a _new_ bug report on "
-			     "drm/i915, see " FDO_BUG_URL " for details.\n");
+		drm_info(&i915->drm,
+			 "Panel advertises DPCD backlight support, but "
+			 "VBT disagrees. If your backlight controls "
+			 "don't work try booting with "
+			 "i915.enable_dpcd_backlight=1. If your machine "
+			 "needs this, please file a _new_ bug report on "
+			 "drm/i915, see " FDO_BUG_URL " for details.\n");
 		return -ENODEV;
 	}