ARM: mvebu: remove static LED setup for netxbig boards

Since DT support is now available for the LEDs found on the LaCie
netxbig boards (Kirkwood-based), then the old-fashion netxbig board
setup file is no longer needed. This patch removes this file.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

arch/arm/mach-mvebu/Kconfig

@@ -117,11 +117,4 @@ config MACH_KIRKWOOD
 	  Say 'Y' here if you want your kernel to support boards based
 	  on the Marvell Kirkwood device tree.
 
-config MACH_NETXBIG
-	bool "LaCie 2Big and 5Big Network v2"
-	depends on MACH_KIRKWOOD
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  LaCie 2Big and 5Big Network v2
-
 endif

arch/arm/mach-mvebu/Makefile

@@ -13,4 +13,3 @@ endif
 
 obj-$(CONFIG_MACH_DOVE)		 += dove.o
 obj-$(CONFIG_MACH_KIRKWOOD)	 += kirkwood.o kirkwood-pm.o
-obj-$(CONFIG_MACH_NETXBIG)	 += netxbig.o

arch/arm/mach-mvebu/board.h

-/*
- * Board functions for Marvell System On Chip
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_MVEBU_BOARD_H
-#define __ARCH_MVEBU_BOARD_H
-
-#ifdef CONFIG_MACH_NETXBIG
-void netxbig_init(void);
-#else
-static inline void netxbig_init(void) {};
-#endif
-#endif

arch/arm/mach-mvebu/kirkwood.c

@@ -25,7 +25,6 @@
 #include "kirkwood.h"
 #include "kirkwood-pm.h"
 #include "common.h"
-#include "board.h"
 
 static struct resource kirkwood_cpufreq_resources[] = {
 	[0] = {
@@ -180,9 +179,6 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-	if (of_machine_is_compatible("lacie,netxbig"))
-		netxbig_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
 }
 

arch/arm/mach-mvebu/netxbig.c

-/*
- * arch/arm/mach-mvbu/board-netxbig.c
- *
- * LaCie 2Big and 5Big Network v2 board setup
- *
- * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/leds-kirkwood-netxbig.h>
-#include "common.h"
-
-/*****************************************************************************
- * GPIO extension LEDs
- ****************************************************************************/
-
-/*
- * The LEDs are controlled by a CPLD and can be configured through a GPIO
- * extension bus:
- *
- * - address register : bit [0-2] -> GPIO [47-49]
- * - data register    : bit [0-2] -> GPIO [44-46]
- * - enable register  : GPIO 29
- */
-
-static int netxbig_v2_gpio_ext_addr[] = { 47, 48, 49 };
-static int netxbig_v2_gpio_ext_data[] = { 44, 45, 46 };
-
-static struct netxbig_gpio_ext netxbig_v2_gpio_ext = {
-	.addr		= netxbig_v2_gpio_ext_addr,
-	.num_addr	= ARRAY_SIZE(netxbig_v2_gpio_ext_addr),
-	.data		= netxbig_v2_gpio_ext_data,
-	.num_data	= ARRAY_SIZE(netxbig_v2_gpio_ext_data),
-	.enable		= 29,
-};
-
-/*
- * Address register selection:
- *
- * addr | register
- * ----------------------------
- *   0  | front LED
- *   1  | front LED brightness
- *   2  | SATA LED brightness
- *   3  | SATA0 LED
- *   4  | SATA1 LED
- *   5  | SATA2 LED
- *   6  | SATA3 LED
- *   7  | SATA4 LED
- *
- * Data register configuration:
- *
- * data | LED brightness
- * -------------------------------------------------
- *   0  | min (off)
- *   -  | -
- *   7  | max
- *
- * data | front LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | fix blue on
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | blink blue on=0.5 sec and blue off=2.5 sec
- *
- * data | SATA LED mode
- * -------------------------------------------------
- *   0  | fix off
- *   1  | SATA activity blink
- *   2  | fix red on
- *   3  | blink blue on=1 sec and blue off=1 sec
- *   4  | blink red on=1 sec and red off=1 sec
- *   5  | blink blue on=2.5 sec and red on=0.5 sec
- *   6  | blink blue on=1 sec and red on=1 sec
- *   7  | fix blue on
- */
-
-static int netxbig_v2_red_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 2,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 4,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static int netxbig_v2_blue_pwr_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 1,
-	[NETXBIG_LED_SATA]	= NETXBIG_LED_INVALID_MODE,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= 7,
-};
-
-static int netxbig_v2_blue_sata_mled[NETXBIG_LED_MODE_NUM] = {
-	[NETXBIG_LED_OFF]	= 0,
-	[NETXBIG_LED_ON]	= 7,
-	[NETXBIG_LED_SATA]	= 1,
-	[NETXBIG_LED_TIMER1]	= 3,
-	[NETXBIG_LED_TIMER2]	= NETXBIG_LED_INVALID_MODE,
-};
-
-static struct netxbig_led_timer netxbig_v2_led_timer[] = {
-	[0] = {
-		.delay_on	= 500,
-		.delay_off	= 500,
-		.mode		= NETXBIG_LED_TIMER1,
-	},
-	[1] = {
-		.delay_on	= 500,
-		.delay_off	= 1000,
-		.mode		= NETXBIG_LED_TIMER2,
-	},
-};
-
-#define NETXBIG_LED(_name, maddr, mval, baddr)			\
-	{ .name		= _name,				\
-	  .mode_addr	= maddr,				\
-	  .mode_val	= mval,					\
-	  .bright_addr	= baddr }
-
-static struct netxbig_led net2big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net2big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net2big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net2big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net2big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net2big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net2big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net2big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net2big_v2_leds_ctrl),
-};
-
-static struct netxbig_led net5big_v2_leds_ctrl[] = {
-	NETXBIG_LED("net5big-v2:blue:power", 0, netxbig_v2_blue_pwr_mled,  1),
-	NETXBIG_LED("net5big-v2:red:power",  0, netxbig_v2_red_mled,       1),
-	NETXBIG_LED("net5big-v2:blue:sata0", 3, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata0",  3, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata1", 4, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata1",  4, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata2", 5, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata2",  5, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata3", 6, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata3",  6, netxbig_v2_red_mled,       2),
-	NETXBIG_LED("net5big-v2:blue:sata4", 7, netxbig_v2_blue_sata_mled, 2),
-	NETXBIG_LED("net5big-v2:red:sata4",  7, netxbig_v2_red_mled,       2),
-};
-
-static struct netxbig_led_platform_data net5big_v2_leds_data = {
-	.gpio_ext	= &netxbig_v2_gpio_ext,
-	.timer		= netxbig_v2_led_timer,
-	.num_timer	= ARRAY_SIZE(netxbig_v2_led_timer),
-	.leds		= net5big_v2_leds_ctrl,
-	.num_leds	= ARRAY_SIZE(net5big_v2_leds_ctrl),
-};
-
-static struct platform_device netxbig_v2_leds = {
-	.name		= "leds-netxbig",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &net2big_v2_leds_data,
-	},
-};
-
-void __init netxbig_init(void)
-{
-
-	if (of_machine_is_compatible("lacie,net5big_v2"))
-		netxbig_v2_leds.dev.platform_data = &net5big_v2_leds_data;
-	platform_device_register(&netxbig_v2_leds);
-}