Commit ec0fb4bd authored by Thibaut VARENE's avatar Thibaut VARENE Committed by Bartlomiej Zolnierkiewicz

[PATCH] aec62xxx: remove all dead (#if0'd) code

Signed-off-by: default avatarThibaut VARENE <varenet@parisc-linux.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent fba51bae
......@@ -65,23 +65,6 @@ static struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
#define BUSCLOCK(D) \
((struct chipset_bus_clock_list_entry *) pci_get_drvdata((D)))
#if 0
if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF) {
(void) pci_read_config_byte(dev, 0x54, &art);
p += sprintf(p, "DMA Mode: %s(%s)",
(c0&0x20)?((art&0x03)?"UDMA":" DMA"):" PIO",
(art&0x02)?"2":(art&0x01)?"1":"0");
p += sprintf(p, " %s(%s)",
(c0&0x40)?((art&0x0c)?"UDMA":" DMA"):" PIO",
(art&0x08)?"2":(art&0x04)?"1":"0");
p += sprintf(p, " %s(%s)",
(c1&0x20)?((art&0x30)?"UDMA":" DMA"):" PIO",
(art&0x20)?"2":(art&0x10)?"1":"0");
p += sprintf(p, " %s(%s)\n",
(c1&0x40)?((art&0xc0)?"UDMA":" DMA"):" PIO",
(art&0x80)?"2":(art&0x40)?"1":"0");
} else {
#endif
/*
* TO DO: active tuning and correction of cards without a bios.
......@@ -112,13 +95,9 @@ static u8 aec62xx_ratemask (ide_drive_t *drive)
switch(hwif->pci_dev->device) {
case PCI_DEVICE_ID_ARTOP_ATP865:
case PCI_DEVICE_ID_ARTOP_ATP865R:
#if 0
mode = (hwif->INB(hwif->dma_master) & 0x10) ? 4 : 3;
#else
mode = (hwif->INB(((hwif->channel) ?
hwif->mate->dma_status :
hwif->dma_status)) & 0x10) ? 4 : 3;
#endif
break;
case PCI_DEVICE_ID_ARTOP_ATP860:
case PCI_DEVICE_ID_ARTOP_ATP860R:
......@@ -263,35 +242,9 @@ static int aec62xx_irq_timeout (ide_drive_t *drive)
case PCI_DEVICE_ID_ARTOP_ATP865:
case PCI_DEVICE_ID_ARTOP_ATP865R:
printk(" AEC62XX time out ");
#if 0
{
int i = 0;
u8 reg49h = 0;
pci_read_config_byte(HWIF(drive)->pci_dev, 0x49, &reg49h);
for (i=0;i<256;i++)
pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h|0x10);
pci_write_config_byte(HWIF(drive)->pci_dev, 0x49, reg49h & ~0x10);
}
return 0;
#endif
default:
break;
}
#if 0
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u8 tmp1 = 0, tmp2 = 0, mode6 = 0;
pci_read_config_byte(dev, 0x44, &tmp1);
pci_read_config_byte(dev, 0x45, &tmp2);
printk(" AEC6280 r44=%x r45=%x ",tmp1,tmp2);
mode6 = HWIF(drive)->INB(((hwif->channel) ?
hwif->mate->dma_status :
hwif->dma_status));
printk(" AEC6280 133=%x ", (mode6 & 0x10));
}
#endif
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment