Commit ec4665c4 authored by Yong Zhang's avatar Yong Zhang Committed by Dmitry Torokhov

Input: remove IRQF_DISABLED from drivers

This flag is a NOOP and can be removed now.
Signed-off-by: default avatarYong Zhang <yong.zhang0@gmail.com>
Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
parent 5d7e7d47
......@@ -550,7 +550,7 @@ static int __devinit adp5588_probe(struct i2c_client *client,
}
error = request_irq(client->irq, adp5588_irq,
IRQF_TRIGGER_FALLING | IRQF_DISABLED,
IRQF_TRIGGER_FALLING,
client->dev.driver->name, kpad);
if (error) {
dev_err(&client->dev, "irq %d busy?\n", client->irq);
......
......@@ -271,7 +271,7 @@ static int __init davinci_ks_probe(struct platform_device *pdev)
}
error = request_irq(davinci_ks->irq, davinci_ks_interrupt,
IRQF_DISABLED, pdev->name, davinci_ks);
0, pdev->name, davinci_ks);
if (error < 0) {
dev_err(dev, "unable to register davinci key scan interrupt\n");
goto fail5;
......
......@@ -323,7 +323,7 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, keypad);
err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
IRQF_DISABLED, pdev->name, keypad);
0, pdev->name, keypad);
if (err)
goto failed_free_dev;
......
......@@ -510,7 +510,7 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev)
/* Ensure that the keypad will stay dormant until opened */
imx_keypad_inhibit(keypad);
error = request_irq(irq, imx_keypad_irq_handler, IRQF_DISABLED,
error = request_irq(irq, imx_keypad_irq_handler, 0,
pdev->name, keypad);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
......
......@@ -129,7 +129,7 @@ static int __devinit jornada720_kbd_probe(struct platform_device *pdev)
err = request_irq(IRQ_GPIO0,
jornada720_kbd_interrupt,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
IRQF_TRIGGER_FALLING,
"jornadakbd", pdev);
if (err) {
printk(KERN_INFO "jornadakbd720_kbd: Unable to grab IRQ\n");
......
......@@ -343,7 +343,6 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
for (i = 0; i < pdata->num_row_gpios; i++) {
err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
matrix_keypad_interrupt,
IRQF_DISABLED |
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"matrix-keypad", keypad);
......
......@@ -535,7 +535,7 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev)
input_dev->evbit[0] |= BIT_MASK(EV_REL);
}
error = request_irq(irq, pxa27x_keypad_irq_handler, IRQF_DISABLED,
error = request_irq(irq, pxa27x_keypad_irq_handler, 0,
pdev->name, keypad);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
......
......@@ -148,7 +148,7 @@ static int __devinit pxa930_rotary_probe(struct platform_device *pdev)
r->input_dev = input_dev;
input_set_drvdata(input_dev, r);
err = request_irq(irq, rotary_irq, IRQF_DISABLED,
err = request_irq(irq, rotary_irq, 0,
"enhanced rotary", r);
if (err) {
dev_err(&pdev->dev, "failed to request IRQ\n");
......
......@@ -203,7 +203,7 @@ static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
input_dev->keycode, input_dev->keybit);
error = request_irq(keypad->irq, w90p910_keypad_irq_handler,
IRQF_DISABLED, pdev->name, keypad);
0, pdev->name, keypad);
if (error) {
dev_err(&pdev->dev, "failed to request IRQ\n");
goto failed_put_clk;
......
......@@ -111,7 +111,7 @@ static int __devinit ixp4xx_spkr_probe(struct platform_device *dev)
input_dev->event = ixp4xx_spkr_event;
err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
IRQF_DISABLED | IRQF_NO_SUSPEND, "ixp4xx-beeper",
IRQF_NO_SUSPEND, "ixp4xx-beeper",
(void *) dev->id);
if (err)
goto err_free_device;
......
......@@ -183,7 +183,7 @@ static int __devinit pxa930_trkball_probe(struct platform_device *pdev)
/* held the module in reset, will be enabled in open() */
pxa930_trkball_disable(trkball);
error = request_irq(irq, pxa930_trkball_interrupt, IRQF_DISABLED,
error = request_irq(irq, pxa930_trkball_interrupt, 0,
pdev->name, trkball);
if (error) {
dev_err(&pdev->dev, "failed to request irq: %d\n", error);
......
......@@ -570,7 +570,7 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client,
"Requesting IRQ: %d\n", touch->client->irq);
ret = request_irq(touch->client->irq, synaptics_i2c_irq,
IRQF_DISABLED|IRQ_TYPE_EDGE_FALLING,
IRQ_TYPE_EDGE_FALLING,
DRIVER_NAME, touch);
if (ret) {
dev_warn(&touch->client->dev,
......
......@@ -229,7 +229,7 @@ static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
goto err_release_mem;
}
err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED,
err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0,
pdev->dev.driver->name, ts_dev);
if (err) {
dev_err(&pdev->dev, "failed to allocate irq.\n");
......
......@@ -396,14 +396,14 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
set_GPIO_IRQ_edge(GPIO_BITSY_NPOWER_BUTTON, GPIO_RISING_EDGE);
if (request_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, action_button_handler,
IRQF_SHARED | IRQF_DISABLED, "h3600_action", ts->dev)) {
IRQF_SHARED, "h3600_action", ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
err = -EBUSY;
goto fail1;
}
if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", ts->dev)) {
IRQF_SHARED, "h3600_suspend", ts->dev)) {
printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
err = -EBUSY;
goto fail2;
......
......@@ -93,7 +93,7 @@ static int __init hp680_ts_init(void)
hp680_ts_dev->phys = "hp680_ts/input0";
if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
IRQF_DISABLED, MODNAME, 0) < 0) {
0, MODNAME, 0) < 0) {
printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
HP680_TS_IRQ);
err = -EBUSY;
......
......@@ -127,7 +127,7 @@ static int __devinit jornada720_ts_probe(struct platform_device *pdev)
error = request_irq(IRQ_GPIO9,
jornada720_ts_interrupt,
IRQF_DISABLED | IRQF_TRIGGER_RISING,
IRQF_TRIGGER_RISING,
"HP7XX Touchscreen driver", pdev);
if (error) {
printk(KERN_INFO "HP7XX TS : Unable to acquire irq!\n");
......
......@@ -276,7 +276,7 @@ static int __devinit lpc32xx_ts_probe(struct platform_device *pdev)
input_set_drvdata(input, tsc);
error = request_irq(tsc->irq, lpc32xx_ts_interrupt,
IRQF_DISABLED, pdev->name, tsc);
0, pdev->name, tsc);
if (error) {
dev_err(&pdev->dev, "failed requesting interrupt\n");
goto err_put_clock;
......
......@@ -328,7 +328,7 @@ static int __devinit s3c2410ts_probe(struct platform_device *pdev)
ts.shift = info->oversampling_shift;
ts.features = platform_get_device_id(pdev)->driver_data;
ret = request_irq(ts.irq_tc, stylus_irq, IRQF_DISABLED,
ret = request_irq(ts.irq_tc, stylus_irq, 0,
"s3c2410_ts_pen", ts.input);
if (ret) {
dev_err(dev, "cannot get TC interrupt\n");
......
......@@ -279,7 +279,7 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev)
w90p910_ts->irq_num = platform_get_irq(pdev, 0);
if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt,
IRQF_DISABLED, "w90p910ts", w90p910_ts)) {
0, "w90p910ts", w90p910_ts)) {
err = -EBUSY;
goto fail4;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment