Commit ec481536 authored by H. Peter Anvin's avatar H. Peter Anvin Committed by Linus Torvalds

Unify the CPU features vectors between i386 and x86-64

Unify the handling of the CPU features vectors between i386 and x86-64.
This also adopts the collapsing of features which are required at
compile-time into constant tests from x86-64 to i386.
Signed-off-by: default avatarH. Peter Anvin <hpa@zytor.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent f8c09377
......@@ -29,7 +29,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow",
NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
"3dnowext", "3dnow",
/* Transmeta-defined */
"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
......@@ -40,8 +41,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* Other (Linux-defined) */
"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
NULL, NULL, NULL, NULL,
"constant_tsc", "up", NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"constant_tsc", "up", NULL, "arch_perfmon",
"pebs", "bts", NULL, "sync_rdtsc",
"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
......@@ -57,9 +59,10 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
"lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm",
"sse4a", "misalignsse",
"3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL,
"lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
"altmovcr8", "abm", "sse4a",
"misalignsse", "3dnowprefetch",
"osvw", "ibs", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
};
......
......@@ -20,7 +20,7 @@ verify_cpu:
testl $(1<<18),%eax
jz bad
#endif
#if REQUIRED_MASK1 != 0
#if REQUIRED_MASK0 != 0
pushfl # standard way to check for cpuid
popl %eax
movl %eax,%ebx
......@@ -39,14 +39,14 @@ verify_cpu:
pushfl
popl %eax
cmpl %eax,%ebx
jz bad # REQUIRED_MASK1 != 0 requires CPUID
jz bad # REQUIRED_MASK0 != 0 requires CPUID
movl $0x0,%eax # See if cpuid 1 is implemented
cpuid
cmpl $0x1,%eax
jb bad # no cpuid 1
#if REQUIRED_MASK1 & NEED_CMPXCHG64
#if REQUIRED_MASK0 & NEED_CMPXCHG64
/* Some VIA C3s need magic MSRs to enable CX64. Do this here */
cmpl $0x746e6543,%ebx # Cent
jne 1f
......@@ -79,10 +79,10 @@ verify_cpu:
#error add proper model checking here
#endif
andl $REQUIRED_MASK1,%edx
xorl $REQUIRED_MASK1,%edx
andl $REQUIRED_MASK0,%edx
xorl $REQUIRED_MASK0,%edx
jnz bad
#endif /* REQUIRED_MASK1 */
#endif /* REQUIRED_MASK0 */
popfl
xor %eax,%eax
......
......@@ -931,7 +931,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
"fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", NULL,
"fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
/* AMD-defined */
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
......@@ -947,10 +947,11 @@ static int show_cpuinfo(struct seq_file *m, void *v)
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Other (Linux-defined) */
"cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL,
"constant_tsc", NULL, NULL,
"up", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
NULL, NULL, NULL, NULL,
"constant_tsc", "up", NULL, "arch_perfmon",
"pebs", "bts", NULL, "sync_rdtsc",
"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
......@@ -961,7 +962,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
/* VIA/Cyrix/Centaur-defined */
NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
......
......@@ -37,20 +37,6 @@ verify_cpu:
pushl $0 # Kill any dangerous flags
popfl
/* minimum CPUID flags for x86-64 as defined by AMD */
#define M(x) (1<<(x))
#define M2(a,b) M(a)|M(b)
#define M4(a,b,c,d) M(a)|M(b)|M(c)|M(d)
#define SSE_MASK \
(M2(X86_FEATURE_XMM,X86_FEATURE_XMM2))
#define REQUIRED_MASK1 \
(M4(X86_FEATURE_FPU,X86_FEATURE_PSE,X86_FEATURE_TSC,X86_FEATURE_MSR)|\
M4(X86_FEATURE_PAE,X86_FEATURE_CX8,X86_FEATURE_PGE,X86_FEATURE_CMOV)|\
M(X86_FEATURE_FXSR))
#define REQUIRED_MASK2 \
(M(X86_FEATURE_LM - 32))
pushfl # standard way to check for cpuid
popl %eax
movl %eax,%ebx
......@@ -79,8 +65,8 @@ verify_cpu:
verify_cpu_noamd:
movl $0x1,%eax # Does the cpu have what it takes
cpuid
andl $REQUIRED_MASK1,%edx
xorl $REQUIRED_MASK1,%edx
andl $REQUIRED_MASK0,%edx
xorl $REQUIRED_MASK0,%edx
jnz verify_cpu_no_longmode
movl $0x80000000,%eax # See if extended cpuid is implemented
......@@ -90,8 +76,8 @@ verify_cpu_noamd:
movl $0x80000001,%eax # Does the cpu have what it takes
cpuid
andl $REQUIRED_MASK2,%edx
xorl $REQUIRED_MASK2,%edx
andl $REQUIRED_MASK1,%edx
xorl $REQUIRED_MASK1,%edx
jnz verify_cpu_no_longmode
verify_cpu_sse_test:
......
......@@ -81,6 +81,7 @@
#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
#define X86_FEATURE_LAPIC_TIMER_BROKEN (3*32+ 14) /* lapic timer broken in C1 */
#define X86_FEATURE_SYNC_RDTSC (3*32+15) /* RDTSC synchronizes the CPU */
#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
......@@ -108,11 +109,17 @@
#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
#define cpu_has(c, bit) \
((__builtin_constant_p(bit) && (bit) < 32 && \
(1UL << (bit)) & REQUIRED_MASK1) ? \
1 : \
test_bit(bit, (c)->x86_capability))
#define cpu_has(c, bit) \
(__builtin_constant_p(bit) && \
( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \
(((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) || \
(((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) || \
(((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) || \
(((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) || \
(((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) || \
(((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) ) \
? 1 : \
test_bit(bit, (c)->x86_capability))
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
......
......@@ -3,32 +3,52 @@
/* Define minimum CPUID feature set for kernel These bits are checked
really early to actually display a visible error message before the
kernel dies. Only add word 0 bits here
kernel dies. Make sure to assign features to the proper mask!
Some requirements that are not in CPUID yet are also in the
CONFIG_X86_MINIMUM_CPU mode which is checked too.
CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
The real information is in arch/i386/Kconfig.cpu, this just converts
the CONFIGs into a bitmask */
#ifndef CONFIG_MATH_EMULATION
# define NEED_FPU (1<<(X86_FEATURE_FPU & 31))
#else
# define NEED_FPU 0
#endif
#ifdef CONFIG_X86_PAE
#define NEED_PAE (1<<X86_FEATURE_PAE)
# define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
#else
#define NEED_PAE 0
# define NEED_PAE 0
#endif
#ifdef CONFIG_X86_CMOV
#define NEED_CMOV (1<<X86_FEATURE_CMOV)
# define NEED_CMOV (1<<(X86_FEATURE_CMOV & 31))
#else
#define NEED_CMOV 0
# define NEED_CMOV 0
#endif
#ifdef CONFIG_X86_CMPXCHG64
#define NEED_CMPXCHG64 (1<<X86_FEATURE_CX8)
# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
#else
# define NEED_CX8 0
#endif
#define REQUIRED_MASK0 (NEED_FPU|NEED_PAE|NEED_CMOV|NEED_CX8)
#ifdef CONFIG_X86_USE_3DNOW
# define NEED_3DNOW (1<<(X86_FEATURE_3DNOW & 31))
#else
#define NEED_CMPXCHG64 0
# define NEED_3DNOW 0
#endif
#define REQUIRED_MASK1 (NEED_PAE|NEED_CMOV|NEED_CMPXCHG64)
#define REQUIRED_MASK1 (NEED_3DNOW)
#define REQUIRED_MASK2 0
#define REQUIRED_MASK3 0
#define REQUIRED_MASK4 0
#define REQUIRED_MASK5 0
#define REQUIRED_MASK6 0
#endif
......@@ -5,6 +5,41 @@
#include <linux/types.h>
#include <linux/stddef.h>
/*
* Alternative inline assembly for SMP.
*
* The LOCK_PREFIX macro defined here replaces the LOCK and
* LOCK_PREFIX macros used everywhere in the source tree.
*
* SMP alternatives use the same data structures as the other
* alternatives and the X86_FEATURE_UP flag to indicate the case of a
* UP system running a SMP kernel. The existing apply_alternatives()
* works fine for patching a SMP kernel for UP.
*
* The SMP alternative tables can be kept after boot and contain both
* UP and SMP versions of the instructions to allow switching back to
* SMP at runtime, when hotplugging in a new CPU, which is especially
* useful in virtualized environments.
*
* The very common lock prefix is handled as special case in a
* separate table which is a pure address list without replacement ptr
* and size information. That keeps the table sizes small.
*/
#ifdef CONFIG_SMP
#define LOCK_PREFIX \
".section .smp_locks,\"a\"\n" \
" .align 8\n" \
" .quad 661f\n" /* address */ \
".previous\n" \
"661:\n\tlock; "
#else /* ! CONFIG_SMP */
#define LOCK_PREFIX ""
#endif
/* This must be included *after* the definition of LOCK_PREFIX */
#include <asm/cpufeature.h>
struct alt_instr {
......@@ -108,39 +143,6 @@ static inline void alternatives_smp_switch(int smp) {}
*/
#define ASM_OUTPUT2(a, b) a, b
/*
* Alternative inline assembly for SMP.
*
* The LOCK_PREFIX macro defined here replaces the LOCK and
* LOCK_PREFIX macros used everywhere in the source tree.
*
* SMP alternatives use the same data structures as the other
* alternatives and the X86_FEATURE_UP flag to indicate the case of a
* UP system running a SMP kernel. The existing apply_alternatives()
* works fine for patching a SMP kernel for UP.
*
* The SMP alternative tables can be kept after boot and contain both
* UP and SMP versions of the instructions to allow switching back to
* SMP at runtime, when hotplugging in a new CPU, which is especially
* useful in virtualized environments.
*
* The very common lock prefix is handled as special case in a
* separate table which is a pure address list without replacement ptr
* and size information. That keeps the table sizes small.
*/
#ifdef CONFIG_SMP
#define LOCK_PREFIX \
".section .smp_locks,\"a\"\n" \
" .align 8\n" \
" .quad 661f\n" /* address */ \
".previous\n" \
"661:\n\tlock; "
#else /* ! CONFIG_SMP */
#define LOCK_PREFIX ""
#endif
struct paravirt_patch;
#ifdef CONFIG_PARAVIRT
void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end);
......
......@@ -7,115 +7,24 @@
#ifndef __ASM_X8664_CPUFEATURE_H
#define __ASM_X8664_CPUFEATURE_H
#define NCAPINTS 7 /* N 32-bit words worth of info */
#include <asm-i386/cpufeature.h>
/* Intel-defined CPU features, CPUID level 0x00000001, word 0 */
#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
#define X86_FEATURE_VME (0*32+ 1) /* Virtual Mode Extensions */
#define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */
#define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */
#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
#define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */
#define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */
#define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */
#define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */
#define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */
#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
#define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */
#define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */
#define X86_FEATURE_PN (0*32+18) /* Processor serial number */
#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */
#define X86_FEATURE_DS (0*32+21) /* Debug Store */
#define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */
#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
/* of FPU context), and CR4.OSFXSR available */
#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */
#define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */
#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */
#define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */
/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
/* Don't duplicate feature flags which are redundant with Intel! */
#define X86_FEATURE_SYSCALL (1*32+11) /* SYSCALL/SYSRET */
#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
#define X86_FEATURE_FXSR_OPT (1*32+25) /* FXSR optimizations */
#define X86_FEATURE_RDTSCP (1*32+27) /* RDTSCP */
#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */
#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */
#define X86_FEATURE_3DNOW (1*32+31) /* 3DNow! */
/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
#define X86_FEATURE_RECOVERY (2*32+ 0) /* CPU in recovery mode */
#define X86_FEATURE_LONGRUN (2*32+ 1) /* Longrun power control */
#define X86_FEATURE_LRTI (2*32+ 3) /* LongRun table interface */
/* Other features, Linux-defined mapping, word 3 */
/* This range is used for feature bits which conflict or are synthesized */
#define X86_FEATURE_CXMMX (3*32+ 0) /* Cyrix MMX extensions */
#define X86_FEATURE_K6_MTRR (3*32+ 1) /* AMD K6 nonstandard MTRRs */
#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */
#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */
#define X86_FEATURE_REP_GOOD (3*32+ 4) /* rep microcode works well on this CPU */
#define X86_FEATURE_CONSTANT_TSC (3*32+5) /* TSC runs at constant rate */
#define X86_FEATURE_SYNC_RDTSC (3*32+6) /* RDTSC syncs CPU core */
#define X86_FEATURE_FXSAVE_LEAK (3*32+7) /* FIP/FOP/FDP leaks through FXSAVE */
#define X86_FEATURE_UP (3*32+8) /* SMP kernel running on UP */
#define X86_FEATURE_ARCH_PERFMON (3*32+9) /* Intel Architectural PerfMon */
#define X86_FEATURE_PEBS (3*32+10) /* Precise-Event Based Sampling */
#define X86_FEATURE_BTS (3*32+11) /* Branch Trace Store */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */
#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */
#define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */
#define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */
#define X86_FEATURE_CID (4*32+10) /* Context ID */
#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */
#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */
#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */
#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */
/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
#define cpu_has(c, bit) test_bit(bit, (c)->x86_capability)
#define boot_cpu_has(bit) test_bit(bit, boot_cpu_data.x86_capability)
#define cpu_has_fpu 1
#undef cpu_has_vme
#define cpu_has_vme 0
#define cpu_has_de 1
#define cpu_has_pse 1
#define cpu_has_tsc 1
#undef cpu_has_pae
#define cpu_has_pae ___BUG___
#define cpu_has_pge 1
#define cpu_has_apic boot_cpu_has(X86_FEATURE_APIC)
#define cpu_has_mtrr 1
#define cpu_has_mmx 1
#define cpu_has_fxsr 1
#define cpu_has_xmm 1
#define cpu_has_xmm2 1
#define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3)
#define cpu_has_ht boot_cpu_has(X86_FEATURE_HT)
#undef cpu_has_mp
#define cpu_has_mp 1 /* XXX */
#undef cpu_has_k6_mtrr
#define cpu_has_k6_mtrr 0
#undef cpu_has_cyrix_arr
#define cpu_has_cyrix_arr 0
#undef cpu_has_centaur_mcr
#define cpu_has_centaur_mcr 0
#define cpu_has_clflush boot_cpu_has(X86_FEATURE_CLFLSH)
#define cpu_has_ds boot_cpu_has(X86_FEATURE_DS)
#define cpu_has_pebs boot_cpu_has(X86_FEATURE_PEBS)
#define cpu_has_bts boot_cpu_has(X86_FEATURE_BTS)
#endif /* __ASM_X8664_CPUFEATURE_H */
......@@ -368,8 +368,6 @@ static inline void sync_core(void)
asm volatile("cpuid" : "=a" (tmp) : "0" (1) : "ebx","ecx","edx","memory");
}
#define cpu_has_fpu 1
#define ARCH_HAS_PREFETCH
static inline void prefetch(void *x)
{
......
#ifndef _ASM_REQUIRED_FEATURES_H
#define _ASM_REQUIRED_FEATURES_H 1
/* Define minimum CPUID feature set for kernel These bits are checked
really early to actually display a visible error message before the
kernel dies. Make sure to assign features to the proper mask!
The real information is in arch/x86_64/Kconfig.cpu, this just converts
the CONFIGs into a bitmask */
/* x86-64 baseline features */
#define NEED_FPU (1<<(X86_FEATURE_FPU & 31))
#define NEED_PSE (1<<(X86_FEATURE_PSE & 31))
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
#define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
#define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
#define NEED_CMOV (1<<(X86_FEATURE_CMOV & 31))
#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
#define REQUIRED_MASK0 (NEED_FPU|NEED_PSE|NEED_MSR|NEED_PAE|\
NEED_CX8|NEED_PGE|NEED_FXSR|NEED_CMOV|\
NEED_XMM|NEED_XMM2)
#define SSE_MASK (NEED_XMM|NEED_XMM2)
/* x86-64 baseline features */
#define NEED_LM (1<<(X86_FEATURE_LM & 31))
#ifdef CONFIG_X86_USE_3DNOW
# define NEED_3DNOW (1<<(X86_FEATURE_3DNOW & 31))
#else
# define NEED_3DNOW 0
#endif
#define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW)
#define REQUIRED_MASK2 0
#define REQUIRED_MASK3 0
#define REQUIRED_MASK4 0
#define REQUIRED_MASK5 0
#define REQUIRED_MASK6 0
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment