Merge tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt

Pull "STi DT updates for v3.19, round 2" from Maxime Coquelin:

Highlights:
-----------
 - Refactor STiH407 SoC and board to add STiH410 SoC support
 - Add USB support to STiH416 SoC

* tag 'sti-dt-for-v3.19-2' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: STi: DT: STiH416: Change miphy356 node name to phy@fe382000
  ARM: STi: DT: STih407: STih410: Add clk_ignore_unused to kernel bootargs
  ARM: STi: DT: STiH410: Add STiH410 SoC and b2120 board support.
  ARM: STi: DT: STih407: Abstract common dt nodes into shared files.
  ARM: STi: DT: STiH410: Add pinctl config for usb controllers.
  ARM: STi: DT: STiH410: Add defines for STiH410 DT clocks
  ARM: STi: DT: STiH416: Add DT nodes for the ehci and ohci usb controllers.
  ARM: STi: DT: STiH416: Add DT node for the stih415/6 usb2 phy
  ARM: STi: DT: STiH416: Add pinctl setup for usb controllers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/Makefile

@@ -420,6 +420,7 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
 dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+	stih410-b2120.dtb \
 	stih415-b2000.dtb \
 	stih415-b2020.dtb \
 	stih416-b2000.dtb \

arch/arm/boot/dts/stih407-b2120.dts

@@ -7,13 +7,15 @@
  * published by the Free Software Foundation.
  */
 /dts-v1/;
-#include "stih407.dtsi"
+#include "stih407-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stihxxx-b2120.dtsi"
 / {
 	model = "STiH407 B2120";
 	compatible = "st,stih407-b2120", "st,stih407";
 
 	chosen {
-		bootargs = "console=ttyAS0,115200";
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
 		linux,stdout-path = &sbc_serial0;
 	};
 
@@ -26,53 +28,4 @@ aliases {
 		ttyAS0 = &sbc_serial0;
 	};
 
-	soc {
-		sbc_serial0: serial@9530000 {
-			status = "okay";
-		};
-
-		leds {
-			compatible = "gpio-leds";
-			red {
-				#gpio-cells = <2>;
-				label = "Front Panel LED";
-				gpios = <&pio4 1 0>;
-				linux,default-trigger = "heartbeat";
-			};
-			green {
-				#gpio-cells = <2>;
-				gpios = <&pio1 3 0>;
-				default-state = "off";
-			};
-		};
-
-		i2c@9842000 {
-			status = "okay";
-		};
-
-		i2c@9843000 {
-			status = "okay";
-		};
-
-		i2c@9844000 {
-			status = "okay";
-		};
-
-		i2c@9845000 {
-			status = "okay";
-		};
-
-		i2c@9540000 {
-			status = "okay";
-		};
-
-		/* SSC11 to HDMI */
-		i2c@9541000 {
-			status = "okay";
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-	};
 };

arch/arm/boot/dts/stih407.dtsi → arch/arm/boot/dts/stih407-family.dtsi

@@ -6,7 +6,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * publishhed by the Free Software Foundation.
  */
-#include "stih407-clock.dtsi"
 #include "stih407-pinctrl.dtsi"
 #include <dt-bindings/reset-controller/stih407-resets.h>
 / {

arch/arm/boot/dts/stih410-b2120.dts

+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include "stihxxx-b2120.dtsi"
+/ {
+	model = "STiH410 B2120";
+	compatible = "st,stih410-b2120", "st,stih410";
+
+	chosen {
+		bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+		linux,stdout-path = &sbc_serial0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		ttyAS0 = &sbc_serial0;
+	};
+};

arch/arm/boot/dts/stih410-clock.dtsi

+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		compatible = "st,stih410-clk", "simple-bus";
+
+		/*
+		 * Fixed 30MHz oscillator inputs to SoC
+		 */
+		clk_sysin: clk-sysin {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <30000000>;
+			clock-output-names = "CLK_SYSIN";
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		arm_periph_clk: clk-m-a9-periphs {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_m_a9>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * A9 PLL.
+		 */
+		clockgen-a9@92b0000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x92b0000 0xffff>;
+
+			clockgen_a9_pll: clockgen-a9-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clockgen-a9-pll-odf";
+			};
+		};
+
+		/*
+		 * ARM CPU related clocks.
+		 */
+		clk_m_a9: clk-m-a9@92b0000 {
+			#clock-cells = <0>;
+			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+			reg = <0x92b0000 0x10000>;
+
+			clocks = <&clockgen_a9_pll 0>,
+				 <&clockgen_a9_pll 0>,
+				 <&clk_s_c0_flexgen 13>,
+				 <&clk_m_a9_ext2f_div2>;
+		};
+
+		/*
+		 * ARM Peripheral clock for timers
+		 */
+		clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+
+			clocks = <&clk_s_c0_flexgen 13>;
+
+			clock-output-names = "clk-m-a9-ext2f-div2";
+
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/*
+		 * Bootloader initialized system infrastructure clock for
+		 * serial devices.
+		 */
+		clk_ext2f_a9: clockgen-c0@13 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			clock-output-names = "clk-s-icn-reg-0";
+		};
+
+		clockgen-a@090ff000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x90ff000 0x1000>;
+
+			clk_s_a0_pll: clk-s-a0-pll {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-a0-pll-ofd-0";
+			};
+
+			clk_s_a0_flexgen: clk-s-a0-flexgen {
+				compatible = "st,flexgen";
+
+				#clock-cells = <1>;
+
+				clocks = <&clk_s_a0_pll 0>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-ic-lmi0",
+						     "clk-ic-lmi1";
+			};
+		};
+
+		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-C", "st,quadfs";
+			reg = <0x9103000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-c0-fs0-ch0",
+					     "clk-s-c0-fs0-ch1",
+					     "clk-s-c0-fs0-ch2",
+					     "clk-s-c0-fs0-ch3";
+		};
+
+		clk_s_c0: clockgen-c@09103000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9103000 0x1000>;
+
+			clk_s_c0_pll0: clk-s-c0-pll0 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll0-odf-0";
+			};
+
+			clk_s_c0_pll1: clk-s-c0-pll1 {
+				#clock-cells = <1>;
+				compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+				clocks = <&clk_sysin>;
+
+				clock-output-names = "clk-s-c0-pll1-odf-0";
+			};
+
+			clk_s_c0_flexgen: clk-s-c0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_c0_pll0 0>,
+					 <&clk_s_c0_pll1 0>,
+					 <&clk_s_c0_quadfs 0>,
+					 <&clk_s_c0_quadfs 1>,
+					 <&clk_s_c0_quadfs 2>,
+					 <&clk_s_c0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-icn-gpu",
+						     "clk-fdma",
+						     "clk-nand",
+						     "clk-hva",
+						     "clk-proc-stfe",
+						     "clk-proc-tp",
+						     "clk-rx-icn-dmu",
+						     "clk-rx-icn-hva",
+						     "clk-icn-cpu",
+						     "clk-tx-icn-dmu",
+						     "clk-mmc-0",
+						     "clk-mmc-1",
+						     "clk-jpegdec",
+						     "clk-ext2fa9",
+						     "clk-ic-bdisp-0",
+						     "clk-ic-bdisp-1",
+						     "clk-pp-dmu",
+						     "clk-vid-dmu",
+						     "clk-dss-lpc",
+						     "clk-st231-aud-0",
+						     "clk-st231-gp-1",
+						     "clk-st231-dmu",
+						     "clk-icn-lmi",
+						     "clk-tx-icn-disp-1",
+						     "clk-icn-sbc",
+						     "clk-stfe-frc2",
+						     "clk-eth-phy",
+						     "clk-eth-ref-phyclk",
+						     "clk-flash-promip",
+						     "clk-main-disp",
+						     "clk-aux-disp",
+						     "clk-compo-dvp",
+						     "clk-tx-icn-hades",
+						     "clk-rx-icn-hades",
+						     "clk-icn-reg-16",
+						     "clk-pp-hades",
+						     "clk-clust-hades",
+						     "clk-hwpe-hades",
+						     "clk-fc-hades";
+			};
+		};
+
+		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9104000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d0-fs0-ch0",
+					     "clk-s-d0-fs0-ch1",
+					     "clk-s-d0-fs0-ch2",
+					     "clk-s-d0-fs0-ch3";
+		};
+
+		clockgen-d0@09104000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9104000 0x1000>;
+
+			clk_s_d0_flexgen: clk-s-d0-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d0_quadfs 0>,
+					 <&clk_s_d0_quadfs 1>,
+					 <&clk_s_d0_quadfs 2>,
+					 <&clk_s_d0_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-pcm-0",
+						     "clk-pcm-1",
+						     "clk-pcm-2",
+						     "clk-spdiff",
+						     "clk-pcmr10-master",
+						     "clk-usb2-phy";
+			};
+		};
+
+		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9106000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d2-fs0-ch0",
+					     "clk-s-d2-fs0-ch1",
+					     "clk-s-d2-fs0-ch2",
+					     "clk-s-d2-fs0-ch3";
+		};
+
+		clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		clockgen-d2@x9106000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9106000 0x1000>;
+
+			clk_s_d2_flexgen: clk-s-d2-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d2_quadfs 0>,
+					 <&clk_s_d2_quadfs 1>,
+					 <&clk_s_d2_quadfs 2>,
+					 <&clk_s_d2_quadfs 3>,
+					 <&clk_sysin>,
+					 <&clk_sysin>,
+					 <&clk_tmdsout_hdmi>;
+
+				clock-output-names = "clk-pix-main-disp",
+						     "clk-pix-pip",
+						     "clk-pix-gdp1",
+						     "clk-pix-gdp2",
+						     "clk-pix-gdp3",
+						     "clk-pix-gdp4",
+						     "clk-pix-aux-disp",
+						     "clk-denc",
+						     "clk-pix-hddac",
+						     "clk-hddac",
+						     "clk-sddac",
+						     "clk-pix-dvo",
+						     "clk-dvo",
+						     "clk-pix-hdmi",
+						     "clk-tmds-hdmi",
+						     "clk-ref-hdmiphy";
+						     };
+		};
+
+		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+			#clock-cells = <1>;
+			compatible = "st,stih407-quadfs660-D", "st,quadfs";
+			reg = <0x9107000 0x1000>;
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-d3-fs0-ch0",
+					     "clk-s-d3-fs0-ch1",
+					     "clk-s-d3-fs0-ch2",
+					     "clk-s-d3-fs0-ch3";
+		};
+
+		clockgen-d3@9107000 {
+			compatible = "st,clkgen-c32";
+			reg = <0x9107000 0x1000>;
+
+			clk_s_d3_flexgen: clk-s-d3-flexgen {
+				#clock-cells = <1>;
+				compatible = "st,flexgen";
+
+				clocks = <&clk_s_d3_quadfs 0>,
+					 <&clk_s_d3_quadfs 1>,
+					 <&clk_s_d3_quadfs 2>,
+					 <&clk_s_d3_quadfs 3>,
+					 <&clk_sysin>;
+
+				clock-output-names = "clk-stfe-frc1",
+						     "clk-tsout-0",
+						     "clk-tsout-1",
+						     "clk-mchi",
+						     "clk-vsens-compo",
+						     "clk-frc1-remote",
+						     "clk-lpc-0",
+						     "clk-lpc-1";
+			};
+		};
+	};
+};

arch/arm/boot/dts/stih410-pinctrl.dtsi

+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+	soc {
+		pin-controller-rear {
+
+			usb0 {
+				pinctrl_usb0: usb2-0 {
+					st,pins {
+						usb-oc-detect = <&pio35 0 ALT1 IN>;
+						usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+					};
+				};
+			};
+
+			usb1 {
+				pinctrl_usb1: usb2-1 {
+					st,pins {
+						usb-oc-detect = <&pio35 2 ALT1 IN>;
+						usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+					};
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/stih410.dtsi

+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+
+};

arch/arm/boot/dts/stih416-b2020.dts

@@ -20,7 +20,7 @@ mmc1: sdhci@fe81f000 {
 			non-removable;
 		};
 
-		miphy365x_phy: miphy365x@fe382000 {
+		miphy365x_phy: phy@fe382000 {
 			phy_port0: port@fe382000 {
 				st,sata-gen = <3>;
 			};

arch/arm/boot/dts/stih416-b2020e.dts

@@ -38,7 +38,7 @@ mmc1: sdhci@fe81f000 {
 			non-removable;
 		};
 
-		miphy365x_phy: miphy365x@fe382000 {
+		miphy365x_phy: phy@fe382000 {
 			phy_port0: port@fe382000 {
 				st,sata-gen = <3>;
 			};

arch/arm/boot/dts/stih416-pinctrl.dtsi

@@ -147,6 +147,15 @@ st,pins {
 				};
 			};
 
+			usb {
+				pinctrl_usb3: usb3 {
+					st,pins {
+						oc-detect = <&pio40 0 ALT1 IN>;
+						pwr-enable = <&pio40 1 ALT1 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c1 {
 				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
 					st,pins {
@@ -318,6 +327,16 @@ st,pins {
 				};
 			};
 
+			usb {
+				pinctrl_usb0: usb0 {
+					st,pins {
+						oc-detect = <&pio9 4 ALT1 IN>;
+						pwr-enable = <&pio9 5 ALT1 OUT>;
+					};
+				};
+			};
+
+
 			i2c1 {
 				pinctrl_i2c1_default: i2c1-default {
 					st,pins {
@@ -506,6 +525,21 @@ st,pins {
 					};
 				};
 			};
+
+			usb {
+				pinctrl_usb1: usb1 {
+					st,pins {
+						oc-detect = <&pio18 0 ALT1 IN>;
+						pwr-enable = <&pio18 1 ALT1 OUT>;
+					};
+				};
+				pinctrl_usb2: usb2 {
+					st,pins {
+						oc-detect = <&pio18 2 ALT1 IN>;
+						pwr-enable = <&pio18 3 ALT1 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-fvdp-fe {

arch/arm/boot/dts/stih416.dtsi

@@ -281,7 +281,7 @@ mmc1: sdhci@fe81f000 {
 			clocks		= <&clk_s_a1_ls 8>;
 		};
 
-		miphy365x_phy: miphy365x@fe382000 {
+		miphy365x_phy: phy@fe382000 {
 			compatible      = "st,miphy365x-phy";
 			st,syscfg  	= <&syscfg_rear>;
 			#address-cells	= <1>;
@@ -316,5 +316,134 @@ sata0: sata@fe380000 {
 
 			status	        = "disabled";
 		};
+
+		usb2_phy: phy@0 {
+			compatible = "st,stih416-usb-phy";
+			#phy-cells = <0>;
+			st,syscfg = <&syscfg_rear>;
+			clocks = <&clk_sysin>;
+			clock-names = "osc_phy";
+		};
+
+		ehci0: usb@fe1ffe00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe1ffe00 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb0>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB0_POWERDOWN>,
+				 <&softreset STIH416_USB0_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci0: usb@fe1ffc00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe1ffc00 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			status = "okay";
+			resets = <&powerdown STIH416_USB0_POWERDOWN>,
+				 <&softreset STIH416_USB0_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ehci1: usb@fe203e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe203e00 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb1>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB1_POWERDOWN>,
+				 <&softreset STIH416_USB1_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci1: usb@fe203c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe203c00 0x100>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB1_POWERDOWN>,
+				 <&softreset STIH416_USB1_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ehci2: usb@fe303e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe303e00 0x100>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB2_POWERDOWN>,
+				 <&softreset STIH416_USB2_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci2: usb@fe303c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe303c00 0x100>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB2_POWERDOWN>,
+				 <&softreset STIH416_USB2_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ehci3: usb@fe343e00 {
+			compatible = "st,st-ehci-300x";
+			reg = <0xfe343e00 0x100>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb3>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB3_POWERDOWN>,
+				 <&softreset STIH416_USB3_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
+
+		ohci3: usb@fe343c00 {
+			compatible = "st,st-ohci-300x";
+			reg = <0xfe343c00 0x100>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+			clocks = <&clk_s_a1_ls 0>,
+				 <&clockgen_b0 0>;
+			clock-names = "ic", "clk48";
+			phys = <&usb2_phy>;
+			phy-names = "usb";
+			resets = <&powerdown STIH416_USB3_POWERDOWN>,
+				 <&softreset STIH416_USB3_SOFTRESET>;
+			reset-names = "power", "softreset";
+		};
 	};
 };

arch/arm/boot/dts/stihxxx-b2120.dtsi

+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+	soc {
+		sbc_serial0: serial@9530000 {
+			status = "okay";
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			red {
+				#gpio-cells = <2>;
+				label = "Front Panel LED";
+				gpios = <&pio4 1 0>;
+				linux,default-trigger = "heartbeat";
+			};
+			green {
+				#gpio-cells = <2>;
+				gpios = <&pio1 3 0>;
+				default-state = "off";
+			};
+		};
+
+		i2c@9842000 {
+			status = "okay";
+		};
+
+		i2c@9843000 {
+			status = "okay";
+		};
+
+		i2c@9844000 {
+			status = "okay";
+		};
+
+		i2c@9845000 {
+			status = "okay";
+		};
+
+		i2c@9540000 {
+			status = "okay";
+		};
+
+		/* SSC11 to HDMI */
+		i2c@9541000 {
+			status = "okay";
+			/* HDMI V1.3a supports Standard mode only */
+			clock-frequency = <100000>;
+			st,i2c-min-scl-pulse-width-us = <0>;
+			st,i2c-min-sda-pulse-width-us = <5>;
+		};
+	};
+};

include/dt-bindings/clock/stih410-clks.h

+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH410 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH410
+#define _DT_BINDINGS_CLK_STIH410
+
+#include "stih407-clks.h"
+
+/* STiH410 introduces new clock outputs compared to STiH407 */
+
+/* CLOCKGEN C0 */
+#define CLK_TX_ICN_HADES	32
+#define CLK_RX_ICN_HADES	33
+#define CLK_ICN_REG_16		34
+#define CLK_PP_HADES		35
+#define CLK_CLUST_HADES		36
+#define CLK_HWPE_HADES		37
+#define CLK_FC_HADES		38
+
+/* CLOCKGEN D0 */
+#define CLK_PCMR10_MASTER	4
+#define CLK_USB2_PHY		5
+
+#endif