arm64: dts: imx8mp: add eqos node and alias

Add EQOS GMAC node per Documentation/devicetree/bindings/net/imx-dwmac.txt ,
leave out the nvmem entries as that is not yet available, so the MAC has to
be passed in via DT by the bootloader.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -18,6 +18,7 @@ / {
 
 	aliases {
 		ethernet0 = &fec;
+		ethernet1 = &eqos;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -786,6 +787,28 @@ fec: ethernet@30be0000 {
 				nvmem_macaddr_swap;
 				status = "disabled";
 			};
+
+			eqos: ethernet@30bf0000 {
+				compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x30bf0000 0x10000>;
+				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "eth_wake_irq", "macirq";
+				clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+					 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+					 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+					 <&clk IMX8MP_CLK_ENET_QOS>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+				assigned-clocks = <&clk IMX8MP_CLK_ENET_AXI>,
+						  <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+						  <&clk IMX8MP_CLK_ENET_QOS>;
+				assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
+							 <&clk IMX8MP_SYS_PLL2_100M>,
+							 <&clk IMX8MP_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <100000000>, <125000000>;
+				intf_mode = <&gpr 0x4>;
+				status = "disabled";
+			};
 		};
 
 		gic: interrupt-controller@38800000 {