cpufreq: sh: Don't validate the frequency table twice

The cpufreq core is already validating the CPU frequency table after
calling the ->init() callback of the cpufreq drivers and the drivers
don't need to do the same anymore. Though they need to set the
policy->freq_table field directly from the ->init() callback now.

Stop validating the frequency table from sh-cpufreq driver.

The driver though prints the min/max frequency values and the same is
done from the ->ready() callback now to keep the behavior unchanged.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/cpufreq/sh-cpufreq.c

@@ -122,11 +122,7 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	freq_table = cpuclk->nr_freqs ? cpuclk->freq_table : NULL;
 	if (freq_table) {
-		int result;
-
-		result = cpufreq_table_validate_and_show(policy, freq_table);
-		if (result)
-			return result;
+		policy->freq_table = freq_table;
 	} else {
 		dev_notice(dev, "no frequency table found, falling back "
 			   "to rate rounding.\n");
@@ -137,11 +133,6 @@ static int sh_cpufreq_cpu_init(struct cpufreq_policy *policy)
 			(clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
 	}
 
-	dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
-	       "Maximum %u.%03u MHz.\n",
-	       policy->min / 1000, policy->min % 1000,
-	       policy->max / 1000, policy->max % 1000);
-
 	return 0;
 }
 
@@ -155,6 +146,16 @@ static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
+static void sh_cpufreq_cpu_ready(struct cpufreq_policy *policy)
+{
+	struct device *dev = get_cpu_device(policy->cpu);
+
+	dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
+	       "Maximum %u.%03u MHz.\n",
+	       policy->min / 1000, policy->min % 1000,
+	       policy->max / 1000, policy->max % 1000);
+}
+
 static struct cpufreq_driver sh_cpufreq_driver = {
 	.name		= "sh",
 	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
@@ -163,6 +164,7 @@ static struct cpufreq_driver sh_cpufreq_driver = {
 	.verify		= sh_cpufreq_verify,
 	.init		= sh_cpufreq_cpu_init,
 	.exit		= sh_cpufreq_cpu_exit,
+	.ready		= sh_cpufreq_cpu_ready,
 	.attr		= cpufreq_generic_attr,
 };