Skip to content

L
linux
Commit ec96e2fe authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits)
  ARM: 6141/1: Add audio support part in arch/arm/mach-w90x900
  ARM: 5939/1: ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline
  ARM: 6140/1: silence a bogus sparse warning in unwind.c
  ARM: mach-at91: duplicated include
  ARM: arch/arm/nwfpe/fpsr.h: Checkpatch cleanup
  ARM: arch/arm/mach-shark/pci.c: Checkpatch cleanup
  ARM: arch/arm/nwfpe/ChangeLog: Checkpatch cleanup
  ARM: arch/arm/mach-sa1100/leds.c: Checkpatch cleanup
  ARM: arch/arm/mach-h720x/common.h: Checkpatch cleanup
  ARM: arch/arm/mach-footbridge/ebsa285-pci.c: Checkpatch cleanup
  ARM: arch/arm/mach-clps711x/Makefile.boot: Checkpatch cleanup
  ARM: arch/arm/boot/bootp/bootp.lds: Checkpatch cleanup
  ARM: SPEAR6xx: remove duplicated #include
  ARM: s3c6400_defconfig: Add NAND driver
  ARM: s3c6400_defconfig: enable sound as modules
  ARM: s3c6400_defconfig: enable power management
  ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34
  ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34
  ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34
  ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34
  ...
parents 8e9815a0 f949c0ed
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 5931 additions and 3834 deletions
arch/arm/Kconfig
View file @ ec96e2fe
......@@ -671,6 +671,7 @@ config ARCH_S5P6440
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
Samsung S5P6440 CPU based systems
......@@ -679,17 +680,19 @@ config ARCH_S5P6442
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
select ARCH_USES_GETTIMEOFFSET
help
Samsung S5P6442 CPU based systems
config ARCH_S5PC1XX
bool "Samsung S5PC1XX"
config ARCH_S5PC100
bool "Samsung S5PC100"
select GENERIC_GPIO
select HAVE_CLK
select CPU_V7
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
help
Samsung S5PC1XX series based systems
Samsung S5PC100 series based systems
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
......@@ -697,6 +700,7 @@ config ARCH_S5PV210
select GENERIC_GPIO
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
help
Samsung S5PV210/S5PC110 series based systems
......@@ -876,7 +880,7 @@ source "arch/arm/mach-sa1100/Kconfig"
source "arch/arm/plat-samsung/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-s5pc1xx/Kconfig"
source "arch/arm/plat-spear/Kconfig"
if ARCH_S3C2410
......@@ -896,9 +900,7 @@ source "arch/arm/mach-s5p6440/Kconfig"
source "arch/arm/mach-s5p6442/Kconfig"
if ARCH_S5PC1XX
source "arch/arm/mach-s5pc100/Kconfig"
endif
source "arch/arm/mach-s5pv210/Kconfig"
......@@ -1419,6 +1421,17 @@ config CMDLINE
time by entering them here. As a minimum, you should specify the
memory size and the root device (e.g., mem=64M root=/dev/nfs).
config CMDLINE_FORCE
bool "Always use the default kernel command string"
depends on CMDLINE != ""
help
Always use the default kernel command string, even if the boot
loader passes other arguments to the kernel.
This is useful if you cannot or don't want to change the
command-line options your boot loader passes to the kernel.
If unsure, say N.
config XIP_KERNEL
bool "Kernel Execute-In-Place from ROM"
depends on !ZBOOT_ROM
......
arch/arm/Makefile
View file @ ec96e2fe
......@@ -168,7 +168,7 @@ machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC1XX) := s5pc100
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
......@@ -198,7 +198,6 @@ plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
plat-$(CONFIG_PLAT_PXA) := pxa
plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung
plat-$(CONFIG_PLAT_S5PC1XX) := s5pc1xx samsung
plat-$(CONFIG_PLAT_S5P) := s5p samsung
plat-$(CONFIG_PLAT_SPEAR) := spear
plat-$(CONFIG_PLAT_VERSATILE) := versatile
......
arch/arm/boot/bootp/bootp.lds
View file @ ec96e2fe
......@@ -19,7 +19,7 @@ SECTIONS
initrd_size = initrd_end - initrd_start;
_etext = .;
}
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
......
arch/arm/configs/mx51_defconfig
View file @ ec96e2fe
......@@ -809,7 +809,22 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_MXC=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
......
arch/arm/configs/s3c2410_defconfig
View file @ ec96e2fe
This diff is collapsed.
arch/arm/configs/s3c6400_defconfig
View file @ ec96e2fe
This diff is collapsed.
arch/arm/configs/s5p6440_defconfig
View file @ ec96e2fe
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc2
# Sat Jan 9 16:33:55 2010
# Linux kernel version: 2.6.34
# Sat May 22 03:18:18 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
......@@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
......@@ -30,6 +32,12 @@ CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
......@@ -46,7 +54,6 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
......@@ -60,6 +67,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -81,10 +89,14 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
......@@ -167,6 +179,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
......@@ -176,7 +189,6 @@ CONFIG_MMU=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
......@@ -193,44 +205,50 @@ CONFIG_MMU=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_S5P6440=y
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
CONFIG_PLAT_SAMSUNG=y
CONFIG_SAMSUNG_CLKSRC=y
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
CONFIG_SAMSUNG_IRQ_UART=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_PLAT_S3C=y
#
# Boot options
#
CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_SAMSUNG_CLKSRC=y
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
CONFIG_SAMSUNG_IRQ_UART=y
CONFIG_SAMSUNG_GPIOLIB_4BIT=y
CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
#
# Power management
#
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
CONFIG_PLAT_S5P=y
CONFIG_CPU_S5P6440_INIT=y
CONFIG_CPU_S5P6440_CLOCK=y
CONFIG_CPU_S5P6440=y
CONFIG_MACH_SMDK6440=y
......@@ -258,6 +276,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
......@@ -382,6 +401,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
......@@ -518,12 +538,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=3
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_UARTS_4=y
CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S5P6440=y
CONFIG_SERIAL_S3C6400=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -549,6 +571,7 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
......@@ -704,6 +727,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......@@ -962,8 +986,10 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
arch/arm/configs/s5p6442_defconfig
View file @ ec96e2fe
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc4
# Mon Jan 25 08:50:28 2010
# Linux kernel version: 2.6.34
# Sat May 22 03:18:19 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
......@@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
......@@ -52,7 +54,6 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
......@@ -88,10 +89,14 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
......@@ -174,6 +179,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
......@@ -183,7 +189,6 @@ CONFIG_MMU=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
......@@ -200,9 +205,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
......@@ -210,14 +217,22 @@ CONFIG_MMU=y
# CONFIG_ARCH_S5P6440 is not set
CONFIG_ARCH_S5P6442=y
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
CONFIG_PLAT_SAMSUNG=y
#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_SAMSUNG_CLKSRC=y
CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
CONFIG_SAMSUNG_IRQ_UART=y
......@@ -226,21 +241,13 @@ CONFIG_S3C_GPIO_CFG_S3C24XX=y
CONFIG_S3C_GPIO_CFG_S3C64XX=y
CONFIG_S3C_GPIO_PULL_UPDOWN=y
CONFIG_SAMSUNG_GPIO_EXTRA=0
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
# CONFIG_S3C_ADC is not set
#
# Power management
#
CONFIG_PLAT_S3C=y
#
# Boot options
#
# CONFIG_S3C_BOOT_ERROR_RESET is not set
CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_S3C_GPIO_SPACE=0
CONFIG_S3C_GPIO_TRACK=y
CONFIG_PLAT_S5P=y
CONFIG_CPU_S5P6442=y
CONFIG_MACH_SMDK6442=y
......@@ -269,6 +276,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
......@@ -394,6 +402,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
......@@ -515,6 +524,7 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S5PV210=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -540,6 +550,7 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
......@@ -685,6 +696,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......
arch/arm/configs/s5pc100_defconfig
View file @ ec96e2fe
......@@ -171,7 +171,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
CONFIG_ARCH_S5PC1XX=y
CONFIG_ARCH_S5PC100=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
......
arch/arm/configs/s5pc110_defconfig
View file @ ec96e2fe
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc4
# Wed Feb 24 15:36:54 2010
# Linux kernel version: 2.6.34
# Sat May 22 03:18:21 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
......@@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_VECTORS_BASE=0xffff0000
......@@ -54,7 +56,6 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
......@@ -90,10 +91,14 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
......@@ -176,6 +181,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
......@@ -185,7 +191,6 @@ CONFIG_MMU=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
......@@ -202,9 +207,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
......@@ -216,10 +223,10 @@ CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
CONFIG_PLAT_SAMSUNG=y
#
......@@ -274,6 +281,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
......@@ -404,6 +412,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
......@@ -526,6 +535,7 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S5PV210=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -551,6 +561,7 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
......@@ -696,6 +707,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......
arch/arm/configs/s5pv210_defconfig
View file @ ec96e2fe
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc4
# Wed Feb 24 15:36:16 2010
# Linux kernel version: 2.6.34
# Sat May 22 03:18:22 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
......@@ -17,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_VECTORS_BASE=0xffff0000
......@@ -54,7 +56,6 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
......@@ -90,10 +91,14 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
......@@ -176,6 +181,7 @@ CONFIG_MMU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
......@@ -185,7 +191,6 @@ CONFIG_MMU=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
......@@ -202,9 +207,11 @@ CONFIG_MMU=y
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
......@@ -216,10 +223,10 @@ CONFIG_ARCH_S5PV210=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
CONFIG_PLAT_SAMSUNG=y
#
......@@ -274,6 +281,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
......@@ -404,6 +412,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
......@@ -526,6 +535,7 @@ CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S5PV210=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
......@@ -551,6 +561,7 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
#
# I2C GPIO expanders:
......@@ -696,6 +707,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
......
arch/arm/include/asm/hardirq.h
View file @ ec96e2fe
......@@ -12,7 +12,9 @@ typedef struct {
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
#if NR_IRQS > 256
#if NR_IRQS > 512
#define HARDIRQ_BITS 10
#elif NR_IRQS > 256
#define HARDIRQ_BITS 9
#else
#define HARDIRQ_BITS 8
......
arch/arm/kernel/setup.c
View file @ ec96e2fe
......@@ -593,6 +593,7 @@ static int __init parse_tag_revision(const struct tag *tag)
__tagtable(ATAG_REVISION, parse_tag_revision);
#ifndef CONFIG_CMDLINE_FORCE
static int __init parse_tag_cmdline(const struct tag *tag)
{
strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
......@@ -600,6 +601,7 @@ static int __init parse_tag_cmdline(const struct tag *tag)
}
__tagtable(ATAG_CMDLINE, parse_tag_cmdline);
#endif /* CONFIG_CMDLINE_FORCE */
/*
* Scan the tag table for this tag, and call its parse function.
......
arch/arm/kernel/unwind.c
View file @ ec96e2fe
......@@ -26,6 +26,7 @@
* http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
*/
#ifndef __CHECKER__
#if !defined (__ARM_EABI__)
#warning Your compiler does not have EABI support.
#warning ARM unwind is known to compile only with EABI compilers.
......@@ -34,6 +35,7 @@
#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
#warning Change compiler or disable ARM_UNWIND option.
#endif
#endif /* __CHECKER__ */
#include <linux/kernel.h>
#include <linux/init.h>
......
arch/arm/mach-at91/board-sam9m10g45ek.c
View file @ ec96e2fe
......@@ -25,7 +25,6 @@
#include <linux/leds.h>
#include <linux/clk.h>
#include <mach/hardware.h>
#include <video/atmel_lcdc.h>
#include <asm/setup.h>
......
arch/arm/mach-clps711x/Makefile.boot
View file @ ec96e2fe
# The standard locations for stuff on CLPS711x type processors
zreladdr-y := 0xc0028000
zreladdr-y := 0xc0028000
params_phys-y := 0xc0000100
# Should probably have some agreement on these...
initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000
initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000
arch/arm/mach-footbridge/ebsa285-pci.c
View file @ ec96e2fe
......@@ -20,9 +20,9 @@ static int __init ebsa285_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (dev->vendor == PCI_VENDOR_ID_CONTAQ &&
dev->device == PCI_DEVICE_ID_CONTAQ_82C693)
switch (PCI_FUNC(dev->devfn)) {
case 1: return 14;
case 2: return 15;
case 3: return 12;
case 1: return 14;
case 2: return 15;
case 3: return 12;
}
return irqmap_ebsa285[(slot + pin) & 3];
......
arch/arm/mach-h720x/common.h
View file @ ec96e2fe
......@@ -14,13 +14,13 @@
*/
extern unsigned long h720x_gettimeoffset(void);
extern void __init h720x_init_irq (void);
extern void __init h720x_init_irq(void);
extern void __init h720x_map_io(void);
#ifdef CONFIG_ARCH_H7202
extern struct sys_timer h7202_timer;
extern void __init init_hw_h7202(void);
extern void __init h7202_init_irq (void);
extern void __init h7202_init_irq(void);
extern void __init h7202_init_time(void);
#endif
......
arch/arm/mach-msm/board-msm7x27.c
View file @ ec96e2fe
......@@ -20,7 +20,6 @@
#include <linux/input.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/power_supply.h>
#include <mach/hardware.h>
......
arch/arm/mach-msm/board-msm7x30.c
View file @ ec96e2fe
......@@ -20,7 +20,6 @@
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
......
arch/arm/mach-msm/board-qsd8x50.c
View file @ ec96e2fe
......@@ -19,7 +19,6 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/bootmem.h>
#include <linux/delay.h>
#include <asm/mach-types.h>
......
arch/arm/mach-mx2/devices.c
View file @ ec96e2fe
......@@ -109,12 +109,7 @@ DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
#endif
/*
* Watchdog:
* - i.MX1
* - i.MX21
* - i.MX27
*/
/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
static struct resource mxc_wdt_resources[] = {
{
.start = MX2x_WDOG_BASE_ADDR,
......@@ -124,7 +119,7 @@ static struct resource mxc_wdt_resources[] = {
};
struct platform_device mxc_wdt = {
.name = "mxc_wdt",
.name = "imx2-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_wdt_resources),
.resource = mxc_wdt_resources,
......@@ -483,8 +478,8 @@ int __init mxc_register_gpios(void)
#ifdef CONFIG_MACH_MX21
static struct resource mx21_usbhc_resources[] = {
{
.start = MX21_BASE_ADDR,
.end = MX21_BASE_ADDR + 0x1FFF,
.start = MX21_USBOTG_BASE_ADDR,
.end = MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
{
......
arch/arm/mach-mx2/mach-pca100.c
View file @ ec96e2fe
......@@ -145,6 +145,7 @@ static struct mxc_nand_platform_data pca100_nand_board_info = {
static struct platform_device *platform_devices[] __initdata = {
&mxc_w1_master_device,
&mxc_fec_device,
&mxc_wdt,
};
static struct imxi2c_platform_data pca100_i2c_1_data = {
......
arch/arm/mach-mx2/mach-pcm038.c
View file @ ec96e2fe
......@@ -182,6 +182,7 @@ static struct platform_device *platform_devices[] __initdata = {
&mxc_w1_master_device,
&mxc_fec_device,
&pcm038_sram_mtd_device,
&mxc_wdt,
};
/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
......
arch/arm/mach-mx25/devices.c
View file @ ec96e2fe
......@@ -500,3 +500,18 @@ struct platform_device mx25_fb_device = {
.coherent_dma_mask = 0xFFFFFFFF,
},
};
static struct resource mxc_wdt_resources[] = {
{
.start = MX25_WDOG_BASE_ADDR,
.end = MX25_WDOG_BASE_ADDR + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device mxc_wdt = {
.name = "imx2-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_wdt_resources),
.resource = mxc_wdt_resources,
};
arch/arm/mach-mx25/devices.h
View file @ ec96e2fe
......@@ -21,3 +21,4 @@ extern struct platform_device mx25_fec_device;
extern struct platform_device mxc_nand_device;
extern struct platform_device mx25_rtc_device;
extern struct platform_device mx25_fb_device;
extern struct platform_device mxc_wdt;
arch/arm/mach-mx3/Kconfig
View file @ ec96e2fe
......@@ -82,6 +82,7 @@ config MACH_MX31MOBOARD
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
......
arch/arm/mach-mx3/devices.c
View file @ ec96e2fe
......@@ -582,12 +582,50 @@ static struct resource imx_wdt_resources[] = {
};
struct platform_device imx_wdt_device0 = {
.name = "imx-wdt",
.name = "imx2-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
.resource = imx_wdt_resources,
};
static struct resource imx_rtc_resources[] = {
{
.start = MX31_RTC_BASE_ADDR,
.end = MX31_RTC_BASE_ADDR + 0x3fff,
.flags = IORESOURCE_MEM,
},
{
.start = MX31_INT_RTC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_rtc_device0 = {
.name = "mxc_rtc",
.id = -1,
.num_resources = ARRAY_SIZE(imx_rtc_resources),
.resource = imx_rtc_resources,
};
static struct resource imx_kpp_resources[] = {
{
.start = MX3x_KPP_BASE_ADDR,
.end = MX3x_KPP_BASE_ADDR + 0xf,
.flags = IORESOURCE_MEM
}, {
.start = MX3x_INT_KPP,
.end = MX3x_INT_KPP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_kpp_device = {
.name = "imx-keypad",
.id = -1,
.num_resources = ARRAY_SIZE(imx_kpp_resources),
.resource = imx_kpp_resources,
};
static int __init mx3_devices_init(void)
{
if (cpu_is_mx31()) {
......
arch/arm/mach-mx3/devices.h
View file @ ec96e2fe
......@@ -27,3 +27,5 @@ extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_ssi_device1;
extern struct platform_device imx_wdt_device0;
extern struct platform_device imx_rtc_device0;
extern struct platform_device imx_kpp_device;
arch/arm/mach-mx3/mach-mx31_3ds.c
View file @ ec96e2fe
......@@ -16,6 +16,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
......@@ -26,6 +27,8 @@
#include <linux/mfd/mc13783.h>
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
#include <linux/fsl_devices.h>
#include <linux/input/matrix_keypad.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -65,6 +68,50 @@ static int mx31_3ds_pins[] = {
MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */
/* MC13783 IRQ */
IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO),
/* USB OTG reset */
IOMUX_MODE(MX31_PIN_USB_PWR, IOMUX_CONFIG_GPIO),
/* USB OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
/*Keyboard*/
MX31_PIN_KEY_ROW0_KEY_ROW0,
MX31_PIN_KEY_ROW1_KEY_ROW1,
MX31_PIN_KEY_ROW2_KEY_ROW2,
MX31_PIN_KEY_COL0_KEY_COL0,
MX31_PIN_KEY_COL1_KEY_COL1,
MX31_PIN_KEY_COL2_KEY_COL2,
MX31_PIN_KEY_COL3_KEY_COL3,
};
/*
* Matrix keyboard
*/
static const uint32_t mx31_3ds_keymap[] = {
KEY(0, 0, KEY_UP),
KEY(0, 1, KEY_DOWN),
KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_LEFT),
KEY(1, 2, KEY_ENTER),
KEY(2, 0, KEY_F6),
KEY(2, 1, KEY_F8),
KEY(2, 2, KEY_F9),
KEY(2, 3, KEY_F10),
};
static struct matrix_keymap_data mx31_3ds_keymap_data = {
.keymap = mx31_3ds_keymap,
.keymap_size = ARRAY_SIZE(mx31_3ds_keymap),
};
/* Regulators */
......@@ -126,6 +173,41 @@ static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = {
#endif
};
/*
* USB OTG
*/
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
#define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
static void mx31_3ds_usbotg_init(void)
{
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
gpio_request(USBOTG_RST_B, "otgusb-reset");
gpio_direction_output(USBOTG_RST_B, 0);
mdelay(1);
gpio_set_value(USBOTG_RST_B, 1);
}
static struct fsl_usb2_platform_data usbotg_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
......@@ -315,6 +397,11 @@ static void __init mxc_board_init(void)
spi_register_board_info(mx31_3ds_spi_devs,
ARRAY_SIZE(mx31_3ds_spi_devs));
mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
mx31_3ds_usbotg_init();
mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
if (!mx31_3ds_init_expio())
platform_device_register(&smsc911x_device);
}
......
arch/arm/mach-mx3/mach-mx31lilly.c
View file @ ec96e2fe
......@@ -27,12 +27,15 @@
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/mfd/mc13783.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -44,6 +47,8 @@
#include <mach/iomux-mx3.h>
#include <mach/board-mx31lilly.h>
#include <mach/spi.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
......@@ -108,6 +113,137 @@ static struct platform_device physmap_flash_device = {
.num_resources = 1,
};
/* USB */
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
static int usbotg_init(struct platform_device *pdev)
{
unsigned int pins[] = {
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB OTG");
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_USB_4WIRE, true);
mxc_iomux_set_gpr(MUX_PGP_USB_COMMON, true);
/* chip select */
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE2, IOMUX_CONFIG_GPIO),
"USBOTG_CS");
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
return 0;
}
static int usbh1_init(struct platform_device *pdev)
{
int pins[] = {
MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
MX31_PIN_CSPI1_MISO__USBH1_RXDP,
MX31_PIN_CSPI1_SS0__USBH1_TXDM,
MX31_PIN_CSPI1_SS1__USBH1_TXDP,
MX31_PIN_CSPI1_SS2__USBH1_RCV,
MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H1");
mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
return 0;
}
static int usbh2_init(struct platform_device *pdev)
{
int pins[] = {
MX31_PIN_USBH2_DATA0__USBH2_DATA0,
MX31_PIN_USBH2_DATA1__USBH2_DATA1,
MX31_PIN_USBH2_CLK__USBH2_CLK,
MX31_PIN_USBH2_DIR__USBH2_DIR,
MX31_PIN_USBH2_NXT__USBH2_NXT,
MX31_PIN_USBH2_STP__USBH2_STP,
};
mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
/* chip select */
mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
"USBH2_CS");
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
return 0;
}
static struct mxc_usbh_platform_data usbotg_pdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static struct mxc_usbh_platform_data usbh1_pdata = {
.init = usbh1_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static struct platform_device *devices[] __initdata = {
&smsc91x_device,
&physmap_flash_device,
......@@ -183,6 +319,15 @@ static void __init mx31lilly_board_init(void)
spi_register_board_info(&mc13783_dev, 1);
platform_add_devices(devices, ARRAY_SIZE(devices));
/* USB */
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh1, &usbh1_pdata);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
}
static void __init mx31lilly_timer_init(void)
......
arch/arm/mach-mx3/mach-mx31moboard.c
View file @ ec96e2fe
......@@ -18,7 +18,6 @@
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/init.h>
......@@ -306,84 +305,56 @@ static struct imxmmc_platform_data sdhc1_pdata = {
* this pin is dedicated for all mx31moboard systems, so we do it here
*/
#define USB_RESET_B IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)
static void usb_xcvr_reset(void)
{
gpio_request(USB_RESET_B, "usb-reset");
gpio_direction_output(USB_RESET_B, 0);
mdelay(1);
gpio_set_value(USB_RESET_B, 1);
}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
PAD_CTL_ODE_CMOS)
#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
static void moboard_usbotg_init(void)
{
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
gpio_request(OTG_EN_B, "usb-udc-en");
gpio_direction_output(OTG_EN_B, 0);
}
static struct fsl_usb2_platform_data usb_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
#if defined(CONFIG_USB_ULPI)
#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
static int moboard_usbh2_hw_init(struct platform_device *pdev)
static void usb_xcvr_reset(void)
{
int ret;
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG | PAD_CTL_100K_PU);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG | PAD_CTL_100K_PD);
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
ret = gpio_request(USBH2_EN_B, "usbh2-en");
if (ret)
return ret;
gpio_request(OTG_EN_B, "usb-udc-en");
gpio_direction_output(OTG_EN_B, 0);
gpio_request(USBH2_EN_B, "usbh2-en");
gpio_direction_output(USBH2_EN_B, 0);
return 0;
gpio_request(USB_RESET_B, "usb-reset");
gpio_direction_output(USB_RESET_B, 0);
mdelay(1);
gpio_set_value(USB_RESET_B, 1);
mdelay(1);
}
static int moboard_usbh2_hw_exit(struct platform_device *pdev)
{
gpio_free(USBH2_EN_B);
return 0;
}
#if defined(CONFIG_USB_ULPI)
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = moboard_usbh2_hw_init,
.exit = moboard_usbh2_hw_exit,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
......@@ -508,8 +479,6 @@ static void __init mxc_board_init(void)
usb_xcvr_reset();
moboard_usbotg_init();
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
moboard_usbh2_init();
switch (mx31moboard_baseboard) {
......@@ -522,7 +491,8 @@ static void __init mxc_board_init(void)
mx31moboard_marxbot_init();
break;
case MX31SMARTBOT:
mx31moboard_smartbot_init();
case MX31EYEBOT:
mx31moboard_smartbot_init(mx31moboard_baseboard);
break;
default:
printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
......
arch/arm/mach-mx3/mach-pcm037.c
View file @ ec96e2fe
......@@ -449,6 +449,7 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
&pcm037_sram_device,
&imx_wdt_device0,
&pcm037_mt9t031,
&pcm037_mt9v022,
};
......
arch/arm/mach-mx3/mach-pcm043.c
View file @ ec96e2fe
......@@ -150,6 +150,7 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
static struct platform_device *devices[] __initdata = {
&pcm043_flash,
&mxc_fec_device,
&imx_wdt_device0,
};
static struct pad_desc pcm043_pads[] = {
......
arch/arm/mach-mx3/mx31lite-db.c
View file @ ec96e2fe
......@@ -206,5 +206,6 @@ void __init mx31lite_db_init(void)
mxc_register_device(&mxc_spi_device0, &spi0_pdata);
platform_device_register(&litekit_led_device);
mxc_register_device(&imx_wdt_device0, NULL);
mxc_register_device(&imx_rtc_device0, NULL);
}
arch/arm/mach-mx3/mx31moboard-devboard.c
View file @ ec96e2fe
......@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
......@@ -213,6 +214,12 @@ static int __init devboard_usbh1_init(void)
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
static struct fsl_usb2_platform_data usb_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
......@@ -229,5 +236,7 @@ void __init mx31moboard_devboard_init(void)
devboard_init_sel_gpios();
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
devboard_usbh1_init();
}
arch/arm/mach-mx3/mx31moboard-marxbot.c
View file @ ec96e2fe
......@@ -25,6 +25,7 @@
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
......@@ -329,6 +330,11 @@ static int __init marxbot_usbh1_init(void)
return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
}
static struct fsl_usb2_platform_data usb_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
......@@ -356,5 +362,7 @@ void __init mx31moboard_marxbot_init(void)
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
marxbot_usbh1_init();
}
arch/arm/mach-mx3/mx31moboard-smartbot.c
View file @ ec96e2fe
......@@ -23,11 +23,18 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <linux/fsl_devices.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <mach/board-mx31moboard.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <media/soc_camera.h>
......@@ -116,10 +123,33 @@ static int __init smartbot_cam_init(void)
return 0;
}
static struct fsl_usb2_platform_data usb_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
#if defined(CONFIG_USB_ULPI)
static struct mxc_usbh_platform_data otg_host_pdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init smartbot_otg_host_init(void)
{
otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
}
#else
static inline int smartbot_otg_host_init(void) { return 0; }
#endif
#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
#define TRSLAT_SRC_CHOICE IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void smartbot_resets_init(void)
{
......@@ -138,15 +168,15 @@ static void smartbot_resets_init(void)
gpio_export(TRSLAT_RST_B, false);
}
if (!gpio_request(SEL3, "sel3")) {
gpio_direction_input(SEL3);
gpio_export(SEL3, true);
if (!gpio_request(TRSLAT_SRC_CHOICE, "translator-src-choice")) {
gpio_direction_output(TRSLAT_SRC_CHOICE, 0);
gpio_export(TRSLAT_SRC_CHOICE, false);
}
}
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_smartbot_init(void)
void __init mx31moboard_smartbot_init(int board)
{
printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
......@@ -155,6 +185,19 @@ void __init mx31moboard_smartbot_init(void)
mxc_register_device(&mxc_uart_device1, &uart_pdata);
switch (board) {
case MX31SMARTBOT:
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
break;
case MX31EYEBOT:
smartbot_otg_host_init();
break;
default:
printk(KERN_WARNING "Unknown board %d, USB OTG not initialized",
board);
}
smartbot_resets_init();
smartbot_cam_init();
......
arch/arm/mach-mx5/board-mx51_babbage.c
View file @ ec96e2fe
......@@ -12,11 +12,16 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/fsl_devices.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
#include <mach/mxc_ehci.h>
#include <asm/irq.h>
#include <asm/setup.h>
......@@ -26,6 +31,18 @@
#include "devices.h"
#define BABBAGE_USB_HUB_RESET (0*32 + 7) /* GPIO_1_7 */
#define BABBAGE_USBH1_STP (0*32 + 27) /* GPIO_1_27 */
#define BABBAGE_PHY_RESET (1*32 +5) /* GPIO_2_5 */
/* USB_CTRL_1 */
#define MX51_USB_CTRL_1_OFFSET 0x10
#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25)
#define MX51_USB_PLLDIV_12_MHZ 0x00
#define MX51_USB_PLL_DIV_19_2_MHZ 0x01
#define MX51_USB_PLL_DIV_24_MHZ 0x02
static struct platform_device *devices[] __initdata = {
&mxc_fec_device,
};
......@@ -46,6 +63,22 @@ static struct pad_desc mx51babbage_pads[] = {
MX51_PAD_EIM_D26__UART3_TXD,
MX51_PAD_EIM_D27__UART3_RTS,
MX51_PAD_EIM_D24__UART3_CTS,
/* USB HOST1 */
MX51_PAD_USBH1_CLK__USBH1_CLK,
MX51_PAD_USBH1_DIR__USBH1_DIR,
MX51_PAD_USBH1_NXT__USBH1_NXT,
MX51_PAD_USBH1_DATA0__USBH1_DATA0,
MX51_PAD_USBH1_DATA1__USBH1_DATA1,
MX51_PAD_USBH1_DATA2__USBH1_DATA2,
MX51_PAD_USBH1_DATA3__USBH1_DATA3,
MX51_PAD_USBH1_DATA4__USBH1_DATA4,
MX51_PAD_USBH1_DATA5__USBH1_DATA5,
MX51_PAD_USBH1_DATA6__USBH1_DATA6,
MX51_PAD_USBH1_DATA7__USBH1_DATA7,
/* USB HUB reset line*/
MX51_PAD_GPIO_1_7__GPIO1_7,
};
/* Serial ports */
......@@ -66,15 +99,149 @@ static inline void mxc_init_imx_uart(void)
}
#endif /* SERIAL_IMX */
static int gpio_usbh1_active(void)
{
struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
int ret;
/* Set USBH1_STP to GPIO and toggle it */
mxc_iomux_v3_setup_pad(&usbh1stp_gpio);
ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
if (ret) {
pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret);
return ret;
}
gpio_direction_output(BABBAGE_USBH1_STP, 0);
gpio_set_value(BABBAGE_USBH1_STP, 1);
msleep(100);
gpio_free(BABBAGE_USBH1_STP);
/* De-assert USB PHY RESETB */
mxc_iomux_v3_setup_pad(&phyreset_gpio);
ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
if (ret) {
pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret);
return ret;
}
gpio_direction_output(BABBAGE_PHY_RESET, 1);
return 0;
}
static inline void babbage_usbhub_reset(void)
{
int ret;
/* Bring USB hub out of reset */
ret = gpio_request(BABBAGE_USB_HUB_RESET, "GPIO1_7");
if (ret) {
printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
return;
}
gpio_direction_output(BABBAGE_USB_HUB_RESET, 0);
/* USB HUB RESET - De-assert USB HUB RESET_N */
msleep(1);
gpio_set_value(BABBAGE_USB_HUB_RESET, 0);
msleep(1);
gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
}
/* This function is board specific as the bit mask for the plldiv will also
be different for other Freescale SoCs, thus a common bitmask is not
possible and cannot get place in /plat-mxc/ehci.c.*/
static int initialize_otg_port(struct platform_device *pdev)
{
u32 v;
void __iomem *usb_base;
u32 usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* Set the PHY clock to 19.2MHz */
v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
return 0;
}
static int initialize_usbh1_port(struct platform_device *pdev)
{
u32 v;
void __iomem *usb_base;
u32 usbother_base;
usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
/* The clock for the USBH1 ULPI port will come externally from the PHY. */
v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
return 0;
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
.flags = MXC_EHCI_INTERNAL_PHY,
};
static struct fsl_usb2_platform_data usb_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI_WIDE,
};
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
static int otg_mode_host;
static int __init babbage_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = 1;
else if (!strcmp(options, "device"))
otg_mode_host = 0;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 0;
}
__setup("otg_mode=", babbage_otg_mode);
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
ARRAY_SIZE(mx51babbage_pads));
mxc_init_imx_uart();
platform_add_devices(devices, ARRAY_SIZE(devices));
if (otg_mode_host)
mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
else {
initialize_otg_port(NULL);
mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
}
gpio_usbh1_active();
mxc_register_device(&mxc_usbh1_device, &usbh1_config);
/* setback USBH1_STP to be function */
mxc_iomux_v3_setup_pad(&usbh1stp);
babbage_usbhub_reset();
}
static void __init mx51_babbage_timer_init(void)
......
arch/arm/mach-mx5/clock-mx51.c
View file @ ec96e2fe
......@@ -37,6 +37,7 @@ static struct clk lp_apm_clk;
static struct clk periph_apm_clk;
static struct clk ahb_clk;
static struct clk ipg_clk;
static struct clk usboh3_clk;
#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
......@@ -570,6 +571,35 @@ static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
return 0;
}
static unsigned long clk_usboh3_get_rate(struct clk *clk)
{
u32 reg, prediv, podf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
reg = __raw_readl(MXC_CCM_CSCDR1);
prediv = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK) >>
MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET) + 1;
podf = ((reg & MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK) >>
MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET) + 1;
return parent_rate / (prediv * podf);
}
static int _clk_usboh3_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg, mux;
mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
&lp_apm_clk);
reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK;
reg |= mux << MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET;
__raw_writel(reg, MXC_CCM_CSCMR1);
return 0;
}
static unsigned long get_high_reference_clock_rate(struct clk *clk)
{
return external_high_reference;
......@@ -691,6 +721,12 @@ static struct clk uart_root_clk = {
.set_parent = _clk_uart_set_parent,
};
static struct clk usboh3_clk = {
.parent = &pll2_sw_clk,
.get_rate = clk_usboh3_get_rate,
.set_parent = _clk_usboh3_set_parent,
};
static struct clk ahb_max_clk = {
.parent = &ahb_clk,
.enable_reg = MXC_CCM_CCGR0,
......@@ -779,6 +815,12 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
};
static void clk_tree_init(void)
......@@ -819,6 +861,9 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
clk_enable(&cpu_clk);
clk_enable(&main_bus_clk);
/* set the usboh3_clk parent to pll2_sw_clk */
clk_set_parent(&usboh3_clk, &pll2_sw_clk);
/* System timer */
mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
MX51_MXC_INT_GPT);
......
arch/arm/mach-mx5/devices.c
View file @ ec96e2fe
/*
* Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
......@@ -10,8 +11,11 @@
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
static struct resource uart0[] = {
{
......@@ -89,8 +93,109 @@ struct platform_device mxc_fec_device = {
.resource = mxc_fec_resources,
};
/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
static u64 usb_dma_mask = DMA_BIT_MASK(32);
static struct resource usbotg_resources[] = {
{
.start = MX51_OTG_BASE_ADDR,
.end = MX51_OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
.start = MX51_MXC_INT_USB_OTG,
.flags = IORESOURCE_IRQ,
},
};
/* OTG gadget device */
struct platform_device mxc_usbdr_udc_device = {
.name = "fsl-usb2-udc",
.id = -1,
.num_resources = ARRAY_SIZE(usbotg_resources),
.resource = usbotg_resources,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
struct platform_device mxc_usbdr_host_device = {
.name = "mxc-ehci",
.id = 0,
.num_resources = ARRAY_SIZE(usbotg_resources),
.resource = usbotg_resources,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource usbh1_resources[] = {
{
.start = MX51_OTG_BASE_ADDR + 0x200,
.end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
.start = MX51_MXC_INT_USB_H1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_usbh1_device = {
.name = "mxc-ehci",
.id = 1,
.num_resources = ARRAY_SIZE(usbh1_resources),
.resource = usbh1_resources,
.dev = {
.dma_mask = &usb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource mxc_wdt_resources[] = {
{
.start = MX51_WDOG_BASE_ADDR,
.end = MX51_WDOG_BASE_ADDR + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device mxc_wdt = {
.name = "imx2-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_wdt_resources),
.resource = mxc_wdt_resources,
};
static struct mxc_gpio_port mxc_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO1_LOW,
.virtual_irq_start = MXC_GPIO_IRQ_START
},
{
.chip.label = "gpio-1",
.base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO2_LOW,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1
},
{
.chip.label = "gpio-2",
.base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO3_LOW,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2
},
{
.chip.label = "gpio-3",
.base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR),
.irq = MX51_MXC_INT_GPIO4_LOW,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
},
};
int __init mxc_register_gpios(void)
{
return 0;
return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
}
arch/arm/mach-mx5/devices.h
View file @ ec96e2fe
......@@ -2,3 +2,7 @@ extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_usbdr_host_device;
extern struct platform_device mxc_usbh1_device;
extern struct platform_device mxc_usbdr_udc_device;
extern struct platform_device mxc_wdt;
arch/arm/mach-nomadik/clock.c
View file @ ec96e2fe
......@@ -56,6 +56,7 @@ static struct clk_lookup lookups[] = {
CLK(&clk_default, "gpio.1"),
CLK(&clk_default, "gpio.2"),
CLK(&clk_default, "gpio.3"),
CLK(&clk_default, "rng"),
};
static int __init clk_init(void)
......
arch/arm/mach-s3c2410/include/mach/map.h
View file @ ec96e2fe
......@@ -114,6 +114,7 @@
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0
#define S3C_PA_WDT S3C2410_PA_WATCHDOG
#define S3C_PA_NAND S3C24XX_PA_NAND
#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s3c64xx/Kconfig
View file @ ec96e2fe
......@@ -7,6 +7,7 @@
config PLAT_S3C64XX
bool
depends on ARCH_S3C64XX
select SAMSUNG_WAKEMASK
default y
help
Base platform code for any Samsung S3C64XX device
......@@ -35,6 +36,11 @@ config S3C64XX_SETUP_SDHCI
Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
config S3C64XX_DEV_ONENAND1
bool
help
Compile in platform device definition for OneNAND1 controller
# platform specific device setup
config S3C64XX_SETUP_I2C0
......@@ -90,8 +96,11 @@ config MACH_SMDK6410
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_FB
select SAMSUNG_DEV_TS
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_WDT
select HAVE_S3C2410_WATCHDOG
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_FB_24BPP
......@@ -179,3 +188,34 @@ config MACH_HMT
select HAVE_PWM
help
Machine support for the Airgoo HMT
config MACH_SMARTQ
bool
select CPU_S3C6410
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_FB
select S3C_DEV_HWMON
select S3C_DEV_RTC
select S3C_DEV_USB_HSOTG
select S3C_DEV_USB_HOST
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_FB_24BPP
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_TS
select HAVE_PWM
help
Shared machine support for SmartQ 5/7
config MACH_SMARTQ5
bool "SmartQ 5"
select MACH_SMARTQ
help
Machine support for the SmartQ 5
config MACH_SMARTQ7
bool "SmartQ 7"
select MACH_SMARTQ
help
Machine support for the SmartQ 7
arch/arm/mach-s3c64xx/Makefile
View file @ ec96e2fe
......@@ -52,6 +52,9 @@ obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
# device support
......@@ -59,3 +62,4 @@ obj-y += dev-uart.o
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o
obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o
arch/arm/mach-s3c64xx/dev-onenand1.c 0 → 100644
View file @ ec96e2fe
/*
* linux/arch/arm/mach-s3c64xx/dev-onenand1.c
*
* Copyright (c) 2008-2010 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* S3C64XX series device definition for OneNAND devices
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/onenand.h>
#include <mach/irqs.h>
#include <mach/map.h>
static struct resource s3c64xx_onenand1_resources[] = {
[0] = {
.start = S3C64XX_PA_ONENAND1,
.end = S3C64XX_PA_ONENAND1 + 0x400 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C64XX_PA_ONENAND1_BUF,
.end = S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = IRQ_ONENAND1,
.end = IRQ_ONENAND1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device s3c64xx_device_onenand1 = {
.name = "samsung-onenand",
.id = 1,
.num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
.resource = s3c64xx_onenand1_resources,
};
void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
{
struct onenand_platform_data *pd;
pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
if (!pd)
printk(KERN_ERR "%s: no memory for platform data\n", __func__);
s3c64xx_device_onenand1.dev.platform_data = pd;
}
arch/arm/mach-s3c64xx/include/mach/irqs.h
View file @ ec96e2fe
......@@ -212,5 +212,9 @@
#define NR_IRQS (IRQ_BOARD_END + 1)
/* Compatibility */
#define IRQ_ONENAND IRQ_ONENAND0
#endif /* __ASM_MACH_S3C64XX_IRQS_H */
arch/arm/mach-s3c64xx/include/mach/map.h
View file @ ec96e2fe
......@@ -52,6 +52,16 @@
#define S3C64XX_PA_SROM (0x70000000)
#define S3C64XX_PA_ONENAND0 (0x70100000)
#define S3C64XX_PA_ONENAND0_BUF (0x20000000)
#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
/* NAND and OneNAND1 controllers occupy the same register region
(depending on SoC POP version) */
#define S3C64XX_PA_ONENAND1 (0x70200000)
#define S3C64XX_PA_ONENAND1_BUF (0x28000000)
#define S3C64XX_SZ_ONENAND1_BUF (SZ_64M)
#define S3C64XX_PA_NAND (0x70200000)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
......@@ -99,11 +109,15 @@
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
#define S3C_PA_NAND S3C64XX_PA_NAND
#define S3C_PA_ONENAND S3C64XX_PA_ONENAND0
#define S3C_PA_ONENAND_BUF S3C64XX_PA_ONENAND0_BUF
#define S3C_SZ_ONENAND_BUF S3C64XX_SZ_ONENAND0_BUF
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
......
arch/arm/mach-s3c64xx/mach-smartq.c 0 → 100644
View file @ ec96e2fe
/*
* linux/arch/arm/mach-s3c64xx/mach-smartq.c
*
* Copyright (C) 2010 Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pwm_backlight.h>
#include <linux/serial_core.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
#include <plat/hwmon.h>
#include <plat/regs-serial.h>
#include <plat/udc-hs.h>
#include <plat/usb-control.h>
#include <plat/sdhci.h>
#include <plat/ts.h>
#include <video/platform_lcd.h>
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg smartq_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
static void smartq_usb_host_powercontrol(int port, int to)
{
pr_debug("%s(%d, %d)\n", __func__, port, to);
if (port == 0) {
gpio_set_value(S3C64XX_GPL(0), to);
gpio_set_value(S3C64XX_GPL(1), to);
}
}
static irqreturn_t smartq_usb_host_ocirq(int irq, void *pw)
{
struct s3c2410_hcd_info *info = pw;
if (gpio_get_value(S3C64XX_GPL(10)) == 0) {
pr_debug("%s: over-current irq (oc detected)\n", __func__);
s3c2410_usb_report_oc(info, 3);
} else {
pr_debug("%s: over-current irq (oc cleared)\n", __func__);
s3c2410_usb_report_oc(info, 0);
}
return IRQ_HANDLED;
}
static void smartq_usb_host_enableoc(struct s3c2410_hcd_info *info, int on)
{
int ret;
/* This isn't present on a SmartQ 5 board */
if (machine_is_smartq5())
return;
if (on) {
ret = request_irq(gpio_to_irq(S3C64XX_GPL(10)),
smartq_usb_host_ocirq, IRQF_DISABLED |
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"USB host overcurrent", info);
if (ret != 0)
pr_err("failed to request usb oc irq: %d\n", ret);
} else {
free_irq(gpio_to_irq(S3C64XX_GPL(10)), info);
}
}
static struct s3c2410_hcd_info smartq_usb_host_info = {
.port[0] = {
.flags = S3C_HCDFLG_USED
},
.port[1] = {
.flags = 0
},
.power_control = smartq_usb_host_powercontrol,
.enable_oc = smartq_usb_host_enableoc,
};
static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = {
.gpio_vbus = S3C64XX_GPL(9),
.gpio_pullup = -1,
.gpio_vbus_inverted = true,
};
static struct platform_device smartq_usb_otg_vbus_dev = {
.name = "gpio-vbus",
.dev.platform_data = &smartq_usb_otg_vbus_pdata,
};
static int __init smartq_bl_init(struct device *dev)
{
s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
return 0;
}
static struct platform_pwm_backlight_data smartq_backlight_data = {
.pwm_id = 1,
.max_brightness = 1000,
.dft_brightness = 600,
.pwm_period_ns = 1000000000 / (1000 * 20),
.init = smartq_bl_init,
};
static struct platform_device smartq_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent = &s3c_device_timer[1].dev,
.platform_data = &smartq_backlight_data,
},
};
static struct s3c2410_ts_mach_info smartq_touchscreen_pdata __initdata = {
.delay = 65535,
.presc = 99,
.oversampling_shift = 4,
};
static struct s3c_sdhci_platdata smartq_internal_hsmmc_pdata = {
.max_width = 4,
/*.broken_card_detection = true,*/
};
static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
/* Battery voltage (?-4.2V) */
.in[0] = &(struct s3c_hwmon_chcfg) {
.name = "smartq:battery-voltage",
.mult = 3300,
.div = 2048,
},
/* Reference voltage (1.2V) */
.in[1] = &(struct s3c_hwmon_chcfg) {
.name = "smartq:reference-voltage",
.mult = 3300,
.div = 4096,
},
};
static void smartq_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
{
gpio_direction_output(S3C64XX_GPM(3), power);
}
static struct plat_lcd_data smartq_lcd_power_data = {
.set_power = smartq_lcd_power_set,
};
static struct platform_device smartq_lcd_power_device = {
.name = "platform-lcd",
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &smartq_lcd_power_data,
};
static struct platform_device *smartq_devices[] __initdata = {
&s3c_device_hsmmc1, /* Init iNAND first, ... */
&s3c_device_hsmmc0, /* ... then the external SD card */
&s3c_device_hsmmc2,
&s3c_device_adc,
&s3c_device_fb,
&s3c_device_hwmon,
&s3c_device_i2c0,
&s3c_device_ohci,
&s3c_device_rtc,
&s3c_device_timer[1],
&s3c_device_ts,
&s3c_device_usb_hsotg,
&smartq_backlight_device,
&smartq_lcd_power_device,
&smartq_usb_otg_vbus_dev,
};
static void __init smartq_lcd_mode_set(void)
{
u32 tmp;
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the LCD bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
static void smartq_power_off(void)
{
gpio_direction_output(S3C64XX_GPK(15), 1);
}
static int __init smartq_power_off_init(void)
{
int ret;
ret = gpio_request(S3C64XX_GPK(15), "Power control");
if (ret < 0) {
pr_err("%s: failed to get GPK15\n", __func__);
return ret;
}
/* leave power on */
gpio_direction_output(S3C64XX_GPK(15), 0);
pm_power_off = smartq_power_off;
return ret;
}
static int __init smartq_usb_host_init(void)
{
int ret;
ret = gpio_request(S3C64XX_GPL(0), "USB power control");
if (ret < 0) {
pr_err("%s: failed to get GPL0\n", __func__);
return ret;
}
ret = gpio_request(S3C64XX_GPL(1), "USB host power control");
if (ret < 0) {
pr_err("%s: failed to get GPL1\n", __func__);
goto err;
}
if (!machine_is_smartq5()) {
/* This isn't present on a SmartQ 5 board */
ret = gpio_request(S3C64XX_GPL(10), "USB host overcurrent");
if (ret < 0) {
pr_err("%s: failed to get GPL10\n", __func__);
goto err2;
}
}
/* turn power off */
gpio_direction_output(S3C64XX_GPL(0), 0);
gpio_direction_output(S3C64XX_GPL(1), 0);
if (!machine_is_smartq5())
gpio_direction_input(S3C64XX_GPL(10));
s3c_device_ohci.dev.platform_data = &smartq_usb_host_info;
return 0;
err2:
gpio_free(S3C64XX_GPL(1));
err:
gpio_free(S3C64XX_GPL(0));
return ret;
}
static int __init smartq_usb_otg_init(void)
{
clk_xusbxti.rate = 12000000;
return 0;
}
static int __init smartq_wifi_init(void)
{
int ret;
ret = gpio_request(S3C64XX_GPK(1), "wifi control");
if (ret < 0) {
pr_err("%s: failed to get GPK1\n", __func__);
return ret;
}
ret = gpio_request(S3C64XX_GPK(2), "wifi reset");
if (ret < 0) {
pr_err("%s: failed to get GPK2\n", __func__);
gpio_free(S3C64XX_GPK(1));
return ret;
}
/* turn power on */
gpio_direction_output(S3C64XX_GPK(1), 1);
/* reset device */
gpio_direction_output(S3C64XX_GPK(2), 0);
mdelay(100);
gpio_set_value(S3C64XX_GPK(2), 1);
gpio_direction_input(S3C64XX_GPK(2));
return 0;
}
static struct map_desc smartq_iodesc[] __initdata = {};
void __init smartq_map_io(void)
{
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
smartq_lcd_mode_set();
}
void __init smartq_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
s3c24xx_ts_set_platdata(&smartq_touchscreen_pdata);
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
WARN_ON(smartq_usb_otg_init());
WARN_ON(smartq_wifi_init());
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
}
arch/arm/mach-s3c64xx/mach-smartq.h 0 → 100644
View file @ ec96e2fe
/*
* linux/arch/arm/mach-s3c64xx/mach-smartq.h
*
* Copyright (C) 2010 Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __MACH_SMARTQ_H
#define __MACH_SMARTQ_H __FILE__
#include <linux/init.h>
extern void __init smartq_map_io(void);
extern void __init smartq_machine_init(void);
#endif /* __MACH_SMARTQ_H */
arch/arm/mach-s3c64xx/mach-smartq5.c 0 → 100644
View file @ ec96e2fe
/*
* linux/arch/arm/mach-s3c64xx/mach-smartq5.c
*
* Copyright (C) 2010 Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
#include <mach/regs-fb.h>
#include <mach/regs-gpio.h>
#include <mach/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include "mach-smartq.h"
static void __init smartq5_lcd_setup_gpio(void)
{
gpio_request(S3C64XX_GPM(0), "LCD SCEN pin");
gpio_request(S3C64XX_GPM(1), "LCD SCL pin");
gpio_request(S3C64XX_GPM(2), "LCD SDA pin");
gpio_request(S3C64XX_GPM(3), "LCD power");
/* turn power off */
gpio_direction_output(S3C64XX_GPM(0), 1);
gpio_direction_input(S3C64XX_GPM(1));
gpio_direction_input(S3C64XX_GPM(2));
gpio_direction_output(S3C64XX_GPM(3), 0);
}
static struct i2c_gpio_platform_data smartq5_lcd_control = {
.sda_pin = S3C64XX_GPM(2),
.scl_pin = S3C64XX_GPM(1),
};
static struct platform_device smartq5_lcd_control_device = {
.name = "i2c-gpio",
.id = 1,
.dev.platform_data = &smartq5_lcd_control,
};
static struct gpio_led smartq5_leds[] __initdata = {
{
.name = "smartq5:green",
.active_low = 1,
.gpio = S3C64XX_GPN(8),
},
{
.name = "smartq5:red",
.active_low = 1,
.gpio = S3C64XX_GPN(9),
},
};
static struct gpio_led_platform_data smartq5_led_data = {
.num_leds = ARRAY_SIZE(smartq5_leds),
.leds = smartq5_leds,
};
static struct platform_device smartq5_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &smartq5_led_data,
};
/* Labels according to the SmartQ manual */
static struct gpio_keys_button smartq5_buttons[] = {
{
.gpio = S3C64XX_GPL(14),
.code = KEY_POWER,
.desc = "Power",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(2),
.code = KEY_KPMINUS,
.desc = "Minus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(12),
.code = KEY_KPPLUS,
.desc = "Plus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(15),
.code = KEY_ENTER,
.desc = "Move",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data smartq5_buttons_data = {
.buttons = smartq5_buttons,
.nbuttons = ARRAY_SIZE(smartq5_buttons),
};
static struct platform_device smartq5_buttons_device = {
.name = "gpio-keys",
.id = 0,
.num_resources = 0,
.dev = {
.platform_data = &smartq5_buttons_data,
}
};
static struct s3c_fb_pd_win smartq5_fb_win0 = {
.win_mode = {
.pixclock = 1000000000000ULL /
((40+1+216+800)*(10+1+35+480)*80),
.left_margin = 40,
.right_margin = 216,
.upper_margin = 10,
.lower_margin = 35,
.hsync_len = 1,
.vsync_len = 1,
.xres = 800,
.yres = 480,
},
.max_bpp = 32,
.default_bpp = 16,
};
static struct s3c_fb_platdata smartq5_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.win[0] = &smartq5_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VDEN,
};
static struct platform_device *smartq5_devices[] __initdata = {
&smartq5_leds_device,
&smartq5_buttons_device,
&smartq5_lcd_control_device,
};
static void __init smartq5_machine_init(void)
{
s3c_fb_set_platdata(&smartq5_lcd_pdata);
smartq_machine_init();
smartq5_lcd_setup_gpio();
platform_add_devices(smartq5_devices, ARRAY_SIZE(smartq5_devices));
}
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
arch/arm/mach-s3c64xx/mach-smartq7.c 0 → 100644
View file @ ec96e2fe
/*
* linux/arch/arm/mach-s3c64xx/mach-smartq7.c
*
* Copyright (C) 2010 Maurus Cuelenaere
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/i2c-gpio.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/map.h>
#include <mach/regs-fb.h>
#include <mach/regs-gpio.h>
#include <mach/s3c6410.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
#include "mach-smartq.h"
static void __init smartq7_lcd_setup_gpio(void)
{
gpio_request(S3C64XX_GPM(0), "LCD CSB pin");
gpio_request(S3C64XX_GPM(3), "LCD power");
gpio_request(S3C64XX_GPM(4), "LCD power status");
/* turn power off */
gpio_direction_output(S3C64XX_GPM(0), 1);
gpio_direction_output(S3C64XX_GPM(3), 0);
gpio_direction_input(S3C64XX_GPM(4));
}
static struct i2c_gpio_platform_data smartq7_lcd_control = {
.sda_pin = S3C64XX_GPM(2),
.scl_pin = S3C64XX_GPM(1),
.sda_is_open_drain = 1,
.scl_is_open_drain = 1,
};
static struct platform_device smartq7_lcd_control_device = {
.name = "i2c-gpio",
.id = 1,
.dev.platform_data = &smartq7_lcd_control,
};
static struct gpio_led smartq7_leds[] __initdata = {
{
.name = "smartq7:red",
.active_low = 1,
.gpio = S3C64XX_GPN(8),
},
{
.name = "smartq7:green",
.active_low = 1,
.gpio = S3C64XX_GPN(9),
},
};
static struct gpio_led_platform_data smartq7_led_data = {
.num_leds = ARRAY_SIZE(smartq7_leds),
.leds = smartq7_leds,
};
static struct platform_device smartq7_leds_device = {
.name = "leds-gpio",
.id = -1,
.dev.platform_data = &smartq7_led_data,
};
/* Labels according to the SmartQ manual */
static struct gpio_keys_button smartq7_buttons[] = {
{
.gpio = S3C64XX_GPL(14),
.code = KEY_POWER,
.desc = "Power",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(2),
.code = KEY_FN,
.desc = "Function",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(3),
.code = KEY_KPMINUS,
.desc = "Minus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(4),
.code = KEY_KPPLUS,
.desc = "Plus",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(12),
.code = KEY_ENTER,
.desc = "Enter",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
{
.gpio = S3C64XX_GPN(15),
.code = KEY_ESC,
.desc = "Cancel",
.active_low = 1,
.debounce_interval = 5,
.type = EV_KEY,
},
};
static struct gpio_keys_platform_data smartq7_buttons_data = {
.buttons = smartq7_buttons,
.nbuttons = ARRAY_SIZE(smartq7_buttons),
};
static struct platform_device smartq7_buttons_device = {
.name = "gpio-keys",
.id = 0,
.num_resources = 0,
.dev = {
.platform_data = &smartq7_buttons_data,
}
};
static struct s3c_fb_pd_win smartq7_fb_win0 = {
.win_mode = {
.pixclock = 1000000000000ULL /
((3+10+5+800)*(1+3+20+480)*80),
.left_margin = 3,
.right_margin = 5,
.upper_margin = 1,
.lower_margin = 20,
.hsync_len = 10,
.vsync_len = 3,
.xres = 800,
.yres = 480,
},
.max_bpp = 32,
.default_bpp = 16,
};
static struct s3c_fb_platdata smartq7_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.win[0] = &smartq7_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
VIDCON1_INV_VCLK,
};
static struct platform_device *smartq7_devices[] __initdata = {
&smartq7_leds_device,
&smartq7_buttons_device,
&smartq7_lcd_control_device,
};
static void __init smartq7_machine_init(void)
{
s3c_fb_set_platdata(&smartq7_lcd_pdata);
smartq_machine_init();
smartq7_lcd_setup_gpio();
platform_add_devices(smartq7_devices, ARRAY_SIZE(smartq7_devices));
}
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
.phys_io = S3C_PA_UART & 0xfff00000,
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C64XX_PA_SDRAM + 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
arch/arm/mach-s3c64xx/mach-smdk6410.c
View file @ ec96e2fe
......@@ -64,6 +64,8 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/ts.h>
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
......@@ -262,6 +264,9 @@ static struct platform_device *smdk6410_devices[] __initdata = {
&smdk6410_lcd_powerdev,
&smdk6410_smsc911x,
&s3c_device_adc,
&s3c_device_ts,
&s3c_device_wdt,
};
#ifdef CONFIG_REGULATOR
......@@ -596,6 +601,12 @@ static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */
};
static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
.delay = 10000,
.presc = 49,
.oversampling_shift = 2,
};
static void __init smdk6410_map_io(void)
{
u32 tmp;
......@@ -625,6 +636,8 @@ static void __init smdk6410_machine_init(void)
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
......
arch/arm/mach-s3c64xx/pm.c
View file @ ec96e2fe
......@@ -18,8 +18,11 @@
#include <linux/io.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <plat/pm.h>
#include <plat/wakeup-mask.h>
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
......@@ -153,8 +156,25 @@ static void s3c64xx_cpu_suspend(void)
panic("sleep resumed to originator?");
}
/* mapping of interrupts to parts of the wakeup mask */
static struct samsung_wakeup_mask wake_irqs[] = {
{ .irq = IRQ_RTC_ALARM, .bit = S3C64XX_PWRCFG_RTC_ALARM_DISABLE, },
{ .irq = IRQ_RTC_TIC, .bit = S3C64XX_PWRCFG_RTC_TICK_DISABLE, },
{ .irq = IRQ_PENDN, .bit = S3C64XX_PWRCFG_TS_DISABLE, },
{ .irq = IRQ_HSMMC0, .bit = S3C64XX_PWRCFG_MMC0_DISABLE, },
{ .irq = IRQ_HSMMC1, .bit = S3C64XX_PWRCFG_MMC1_DISABLE, },
{ .irq = IRQ_HSMMC2, .bit = S3C64XX_PWRCFG_MMC2_DISABLE, },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_BATF_DISABLE},
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_HSI_DISABLE },
{ .irq = NO_WAKEUP_IRQ, .bit = S3C64XX_PWRCFG_MSM_DISABLE },
};
static void s3c64xx_pm_prepare(void)
{
samsung_sync_wakemask(S3C64XX_PWR_CFG,
wake_irqs, ARRAY_SIZE(wake_irqs));
/* store address of resume. */
__raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
......
arch/arm/mach-s3c64xx/s3c6400.c
View file @ ec96e2fe
......@@ -37,6 +37,7 @@
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
void __init s3c6400_map_io(void)
......@@ -51,6 +52,9 @@ void __init s3c6400_map_io(void)
s3c_i2c0_setname("s3c2440-i2c");
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6400-onenand");
s3c64xx_onenand1_setname("s3c6400-onenand");
}
void __init s3c6400_init_clocks(int xtal)
......
arch/arm/mach-s3c64xx/s3c6410.c
View file @ ec96e2fe
......@@ -39,6 +39,7 @@
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/adc.h>
#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
......@@ -55,6 +56,8 @@ void __init s3c6410_map_io(void)
s3c_device_adc.name = "s3c64xx-adc";
s3c_device_nand.name = "s3c6400-nand";
s3c_onenand_setname("s3c6410-onenand");
s3c64xx_onenand1_setname("s3c6410-onenand");
}
void __init s3c6410_init_clocks(int xtal)
......
arch/arm/mach-s5p6440/Kconfig
View file @ ec96e2fe
......@@ -16,6 +16,10 @@ config CPU_S5P6440
config MACH_SMDK6440
bool "SMDK6440"
select CPU_S5P6440
select SAMSUNG_DEV_TS
select SAMSUNG_DEV_ADC
select S3C_DEV_WDT
select HAVE_S3C2410_WATCHDOG
help
Machine support for the Samsung SMDK6440
......
arch/arm/mach-s5p6440/Makefile
View file @ ec96e2fe
......@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_SMDK6440) += mach-smdk6440.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
arch/arm/mach-s5p6440/cpu.c
View file @ ec96e2fe
......@@ -61,6 +61,7 @@ static void s5p6440_idle(void)
void __init s5p6440_map_io(void)
{
/* initialize any device information early */
s3c_device_adc.name = "s3c64xx-adc";
}
void __init s5p6440_init_clocks(int xtal)
......
arch/arm/mach-s5p6440/dev-spi.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5p6440/gpio.c
View file @ ec96e2fe
......@@ -46,6 +46,7 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
void __iomem *base = ourchip->base;
void __iomem *regcon = base;
unsigned long con;
unsigned long flags;
switch (offset) {
case 6:
......@@ -63,10 +64,14 @@ static int s5p6440_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
break;
}
s3c_gpio_lock(ourchip, flags);
con = __raw_readl(regcon);
con &= ~(0xf << con_4bit_shift(offset));
__raw_writel(con, regcon);
s3c_gpio_unlock(ourchip, flags);
return 0;
}
......@@ -78,6 +83,7 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
void __iomem *regcon = base;
unsigned long con;
unsigned long dat;
unsigned long flags;
unsigned con_offset = offset;
switch (con_offset) {
......@@ -96,6 +102,8 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
break;
}
s3c_gpio_lock(ourchip, flags);
con = __raw_readl(regcon);
con &= ~(0xf << con_4bit_shift(con_offset));
con |= 0x1 << con_4bit_shift(con_offset);
......@@ -109,6 +117,8 @@ static int s5p6440_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
__raw_writel(con, regcon);
__raw_writel(dat, base + GPIODAT_OFF);
s3c_gpio_unlock(ourchip, flags);
return 0;
}
......@@ -117,6 +127,7 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
{
void __iomem *reg = chip->base;
unsigned int shift;
unsigned long flags;
u32 con;
switch (off) {
......@@ -142,11 +153,15 @@ int s5p6440_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
cfg <<= shift;
}
s3c_gpio_lock(chip, flags);
con = __raw_readl(reg);
con &= ~(0xf << shift);
con |= cfg;
__raw_writel(con, reg);
s3c_gpio_unlock(chip, flags);
return 0;
}
......
arch/arm/mach-s5p6440/include/mach/map.h
View file @ ec96e2fe
......@@ -54,6 +54,9 @@
#define S5P6440_PA_IIC0 (0xEC104000)
#define S5P6440_PA_SPI0 0xEC400000
#define S5P6440_PA_SPI1 0xEC500000
#define S5P6440_PA_HSOTG (0xED100000)
#define S5P6440_PA_HSMMC0 (0xED800000)
......@@ -69,8 +72,13 @@
/* PCM */
#define S5P6440_PA_PCM 0xF2100000
#define S5P6440_PA_ADC (0xF3000000)
/* compatibiltiy defines. */
#define S3C_PA_UART S5P6440_PA_UART
#define S3C_PA_IIC S5P6440_PA_IIC0
#define S3C_PA_WDT S5P6440_PA_WDT
#define SAMSUNG_PA_ADC S5P6440_PA_ADC
#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s5p6440/include/mach/spi-clocks.h 0 → 100644
View file @ ec96e2fe
/* linux/arch/arm/mach-s5p6440/include/mach/spi-clocks.h
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __S5P6440_PLAT_SPI_CLKS_H
#define __S5P6440_PLAT_SPI_CLKS_H __FILE__
#define S5P6440_SPI_SRCCLK_PCLK 0
#define S5P6440_SPI_SRCCLK_SCLK 1
#endif /* __S5P6440_PLAT_SPI_CLKS_H */
arch/arm/mach-s5p6440/mach-smdk6440.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5p6442/Makefile
View file @ ec96e2fe
......@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
arch/arm/mach-s5p6442/dev-spi.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5p6442/include/mach/map.h
View file @ ec96e2fe
......@@ -54,6 +54,8 @@
#define S5P6442_PA_SDRAM (0x20000000)
#define S5P_PA_SDRAM S5P6442_PA_SDRAM
#define S5P6442_PA_SPI 0xEC300000
/* I2S */
#define S5P6442_PA_I2S0 0xC0B00000
#define S5P6442_PA_I2S1 0xF2200000
......
arch/arm/mach-s5p6442/include/mach/spi-clocks.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/Kconfig
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/Makefile
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/cpu.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/dev-audio.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/dev-spi.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/dma.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/gpiolib.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/dma.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/gpio.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/irqs.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/map.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/spi-clocks.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/system.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/include/mach/tick.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pc100/mach-smdkc100.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/Kconfig
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/Makefile
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/cpu.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/dev-onenand.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/dev-spi.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/include/mach/irqs.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/include/mach/map.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/include/mach/regs-clock.h
View file @ ec96e2fe
......@@ -126,6 +126,7 @@
#define S5P_RST_STAT S5P_CLKREG(0xA000)
#define S5P_OSC_CON S5P_CLKREG(0x8000)
#define S5P_MDNIE_SEL S5P_CLKREG(0x7008)
#define S5P_MIPI_PHY_CON0 S5P_CLKREG(0x7200)
#define S5P_MIPI_PHY_CON1 S5P_CLKREG(0x7204)
#define S5P_MIPI_CONTROL S5P_CLKREG(0xE814)
......
arch/arm/mach-s5pv210/include/mach/regs-fb.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/include/mach/regs-gpio.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/include/mach/spi-clocks.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/mach-aquila.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/mach-goni.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/mach-smdkc110.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/mach-smdkv210.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/setup-fb-24bpp.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/setup-i2c0.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/setup-i2c1.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/setup-i2c2.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/setup-sdhci-gpio.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-s5pv210/setup-sdhci.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-sa1100/leds.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-shark/pci.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-spear6xx/spear6xx.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-w90x900/dev.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-w90x900/include/mach/mfp.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mach-w90x900/mfp.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/mm/cache-v7.S
View file @ ec96e2fe
This diff is collapsed.
arch/arm/nwfpe/ChangeLog
View file @ ec96e2fe
This diff is collapsed.
arch/arm/nwfpe/fpsr.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-mxc/ehci.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-mxc/gpio.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-mxc/include/mach/iomux-mx3.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-mxc/include/mach/iomux-mx51.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-mxc/include/mach/mxc_ehci.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-mxc/time.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-mxc/tzic.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-s3c24xx/devs.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-s5p/Kconfig
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-s5p/Makefile
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-s5p/cpu.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-s5p/include/plat/s5pc100.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-s5p/irq-eint.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-s5pc1xx/Kconfig deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/Makefile deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/clock.c deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/cpu.c deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/dev-uart.c deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/include/plat/irqs.h deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/include/plat/pll.h deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/include/plat/regs-clock.h deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/include/plat/regs-power.h deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/include/plat/s5pc100.h deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/irq-eint.c deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/irq.c deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-s5pc1xx/s5pc100-clock.c deleted 100644 → 0
View file @ 8e9815a0
This diff is collapsed.
arch/arm/plat-samsung/Kconfig
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/Makefile
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/adc.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/dev-i2c2.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/dev-onenand.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/dev-wdt.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/include/plat/devs.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/include/plat/fb.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/include/plat/iic.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/include/plat/onenand-core.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/include/plat/regs-onenand.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/include/plat/sdhci.h
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/include/plat/wakeup-mask.h 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/pm-gpio.c
View file @ ec96e2fe
This diff is collapsed.
arch/arm/plat-samsung/wakeup-mask.c 0 → 100644
View file @ ec96e2fe
This diff is collapsed.
drivers/char/hw_random/nomadik-rng.c
View file @ ec96e2fe
This diff is collapsed.
drivers/mmc/core/sdio.c
View file @ ec96e2fe
This diff is collapsed.
drivers/mmc/host/mxcmmc.c
View file @ ec96e2fe
This diff is collapsed.
drivers/usb/host/ehci-mxc.c
View file @ ec96e2fe
This diff is collapsed.
include/linux/mmc/host.h
View file @ ec96e2fe
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7