Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NET]: dev.c comment fixes
  [IPV6] ROUTE: Don't try less preferred routes for on-link routes.
  [IRDA]: *_DONGLE should depend on IRTTY_SIR
  [MAINTAINERS]: Add entry for netem

MAINTAINERS

@@ -1899,6 +1899,12 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+NETEM NETWORK EMULATOR
+P:	Stephen Hemminger
+M:	shemminger@osdl.org
+L:	netem@osdl.org
+S:	Maintained
+
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
 P:	Marc Boucher

drivers/net/irda/Kconfig

@@ -33,7 +33,7 @@ config DONGLE
 
 config ESI_DONGLE
 	tristate "ESI JetEye PC dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Extended Systems
 	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
@@ -44,7 +44,7 @@ config ESI_DONGLE
 
 config ACTISYS_DONGLE
 	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-220L and
 	  IR220L+ dongles.  To compile it as a module, choose M here. The
@@ -55,7 +55,7 @@ config ACTISYS_DONGLE
 
 config TEKRAM_DONGLE
 	tristate "Tekram IrMate 210B dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Tekram IrMate 210B
 	  dongle.  To compile it as a module, choose M here. The Tekram dongle
@@ -66,7 +66,7 @@ config TEKRAM_DONGLE
 
 config TOIM3232_DONGLE
 	tristate "TOIM3232 IrDa dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Vishay/Temic
 	  TOIM3232 and TOIM4232 based dongles.
@@ -74,7 +74,7 @@ config TOIM3232_DONGLE
 
 config LITELINK_DONGLE
 	tristate "Parallax LiteLink dongle"
-	depends on DONGLE && IRDA
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Parallax Litelink
 	  dongle.  To compile it as a module, choose M here.  The Parallax
@@ -85,7 +85,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -98,7 +98,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -109,7 +109,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -123,7 +123,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
@@ -132,7 +132,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
-	depends on DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, choose M here.

net/core/dev.c

@@ -127,7 +127,7 @@
  *             sure which should go first, but I bet it won't make much
  *             difference if we are running VLANs.  The good news is that
  *             this protocol won't be in the list unless compiled in, so
- *             the average user (w/out VLANs) will not be adversly affected.
+ *             the average user (w/out VLANs) will not be adversely affected.
  *             --BLG
  *
  *		0800	IP
@@ -149,7 +149,7 @@ static struct list_head ptype_base[16];	/* 16 way hashed list */
 static struct list_head ptype_all;		/* Taps */
 
 /*
- * The @dev_base list is protected by @dev_base_lock and the rtln
+ * The @dev_base list is protected by @dev_base_lock and the rtnl
  * semaphore.
  *
  * Pure readers hold dev_base_lock for reading.
@@ -641,10 +641,12 @@ int dev_valid_name(const char *name)
  *	@name: name format string
  *
  *	Passed a format string - eg "lt%d" it will try and find a suitable
- *	id. Not efficient for many devices, not called a lot. The caller
- *	must hold the dev_base or rtnl lock while allocating the name and
- *	adding the device in order to avoid duplicates. Returns the number
- *	of the unit assigned or a negative errno code.
+ *	id. It scans list of devices to build up a free map, then chooses
+ *	the first empty slot. The caller must hold the dev_base or rtnl lock
+ *	while allocating the name and adding the device in order to avoid
+ *	duplicates.
+ *	Limited to bits_per_byte * page size devices (ie 32K on most platforms).
+ *	Returns the number of the unit assigned or a negative errno code.
  */
 
 int dev_alloc_name(struct net_device *dev, const char *name)
@@ -744,7 +746,7 @@ int dev_change_name(struct net_device *dev, char *newname)
 }
 
 /**
- *	netdev_features_change - device changes fatures
+ *	netdev_features_change - device changes features
  *	@dev: device to cause notification
  *
  *	Called to indicate a device has changed features.
@@ -2196,7 +2198,7 @@ int netdev_set_master(struct net_device *slave, struct net_device *master)
  *	@dev: device
  *	@inc: modifier
  *
- *	Add or remove promsicuity from a device. While the count in the device
+ *	Add or remove promiscuity from a device. While the count in the device
  *	remains above zero the interface remains promiscuous. Once it hits zero
  *	the device reverts back to normal filtering operation. A negative inc
  *	value is used to drop promiscuity on the device.
@@ -3122,7 +3124,7 @@ EXPORT_SYMBOL(alloc_netdev);
 void free_netdev(struct net_device *dev)
 {
 #ifdef CONFIG_SYSFS
-	/*  Compatiablity with error handling in drivers */
+	/*  Compatibility with error handling in drivers */
 	if (dev->reg_state == NETREG_UNINITIALIZED) {
 		kfree((char *)dev - dev->padded);
 		return;

net/ipv6/route.c

@@ -280,10 +280,13 @@ static int inline rt6_check_neigh(struct rt6_info *rt)
 {
 	struct neighbour *neigh = rt->rt6i_nexthop;
 	int m = 0;
-	if (neigh) {
+	if (rt->rt6i_flags & RTF_NONEXTHOP ||
+	    !(rt->rt6i_flags & RTF_GATEWAY))
+		m = 1;
+	else if (neigh) {
 		read_lock_bh(&neigh->lock);
 		if (neigh->nud_state & NUD_VALID)
-			m = 1;
+			m = 2;
 		read_unlock_bh(&neigh->lock);
 	}
 	return m;
@@ -292,15 +295,18 @@ static int inline rt6_check_neigh(struct rt6_info *rt)
 static int rt6_score_route(struct rt6_info *rt, int oif,
 			   int strict)
 {
-	int m = rt6_check_dev(rt, oif);
+	int m, n;
+		
+	m = rt6_check_dev(rt, oif);
 	if (!m && (strict & RT6_SELECT_F_IFACE))
 		return -1;
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	m |= IPV6_DECODE_PREF(IPV6_EXTRACT_PREF(rt->rt6i_flags)) << 2;
 #endif
-	if (rt6_check_neigh(rt))
+	n = rt6_check_neigh(rt);
+	if (n > 1)
 		m |= 16;
-	else if (strict & RT6_SELECT_F_REACHABLE)
+	else if (!n && strict & RT6_SELECT_F_REACHABLE)
 		return -1;
 	return m;
 }