Commit ecef7253 authored by Tejun Heo's avatar Tejun Heo Committed by Jeff Garzik

libata: separate out ata_host_start()

Separate out ata_host_start() from ata_device_add().  ata_host_start()
calls ->port_start on each port if available and freezes the port.
Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 4911487a
......@@ -5819,11 +5819,14 @@ static void ata_host_release(struct device *gendev, void *res)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
if (ap && ap->ops->port_stop)
if (!ap)
continue;
if ((host->flags & ATA_HOST_STARTED) && ap->ops->port_stop)
ap->ops->port_stop(ap);
}
if (host->ops->host_stop)
if ((host->flags & ATA_HOST_STARTED) && host->ops->host_stop)
host->ops->host_stop(host);
for (i = 0; i < host->n_ports; i++) {
......@@ -5842,6 +5845,56 @@ static void ata_host_release(struct device *gendev, void *res)
dev_set_drvdata(gendev, NULL);
}
/**
* ata_host_start - start and freeze ports of an ATA host
* @host: ATA host to start ports for
*
* Start and then freeze ports of @host. Started status is
* recorded in host->flags, so this function can be called
* multiple times. Ports are guaranteed to get started only
* once.
*
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
* 0 if all ports are started successfully, -errno otherwise.
*/
int ata_host_start(struct ata_host *host)
{
int i, rc;
if (host->flags & ATA_HOST_STARTED)
return 0;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
if (ap->ops->port_start) {
rc = ap->ops->port_start(ap);
if (rc) {
ata_port_printk(ap, KERN_ERR, "failed to "
"start port (errno=%d)\n", rc);
goto err_out;
}
}
ata_eh_freeze_port(ap);
}
host->flags |= ATA_HOST_STARTED;
return 0;
err_out:
while (--i >= 0) {
struct ata_port *ap = host->ports[i];
if (ap->ops->port_stop)
ap->ops->port_stop(ap);
}
return rc;
}
/**
* ata_sas_host_init - Initialize a host struct
* @host: host to initialize
......@@ -5931,14 +5984,6 @@ int ata_device_add(const struct ata_probe_ent *ent)
continue;
}
/* start port */
rc = ap->ops->port_start(ap);
if (rc) {
host->ports[i] = NULL;
scsi_host_put(ap->scsi_host);
goto err_out;
}
/* Report the secondary IRQ for second channel legacy */
if (i == 1 && ent->irq2)
irq_line = ent->irq2;
......@@ -5956,11 +6001,13 @@ int ata_device_add(const struct ata_probe_ent *ent)
ap->ioaddr.ctl_addr,
ap->ioaddr.bmdma_addr,
irq_line);
/* freeze port before requesting IRQ */
ata_eh_freeze_port(ap);
}
/* start ports */
rc = ata_host_start(host);
if (rc)
goto err_out;
/* obtain irq, that may be shared between channels */
rc = devm_request_irq(dev, ent->irq, ent->port_ops->irq_handler,
ent->irq_flags, DRV_NAME, host);
......@@ -6446,6 +6493,7 @@ EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
EXPORT_SYMBOL_GPL(ata_std_bios_param);
EXPORT_SYMBOL_GPL(ata_std_ports);
EXPORT_SYMBOL_GPL(ata_host_init);
EXPORT_SYMBOL_GPL(ata_host_start);
EXPORT_SYMBOL_GPL(ata_device_add);
EXPORT_SYMBOL_GPL(ata_host_detach);
EXPORT_SYMBOL_GPL(ata_sg_init);
......
......@@ -210,6 +210,7 @@ enum {
/* host set flags */
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */
ATA_HOST_STARTED = (1 << 1), /* Host started */
/* various lengths of time */
ATA_TMOUT_BOOT = 30 * HZ, /* heuristic */
......@@ -732,6 +733,7 @@ extern int ata_pci_device_resume(struct pci_dev *pdev);
#endif
extern int ata_pci_clear_simplex(struct pci_dev *pdev);
#endif /* CONFIG_PCI */
extern int ata_host_start(struct ata_host *host);
extern int ata_device_add(const struct ata_probe_ent *ent);
extern void ata_host_detach(struct ata_host *host);
extern void ata_host_init(struct ata_host *, struct device *,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment