Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
 "This series has been 12 years in the making, it mostly finishes the
  work that was started with the founding of Linaro to clean up platform
  support in the kernel.

  The largest change here is a cleanup of the omap1 platform, which is
  the final ARM machine type to get converted to the common-clk
  subsystem. All the omap1 specific drivers are now made independent of
  the mach/*.h headers to allow the platform to be part of a generic
  ARMv4/v5 multiplatform kernel.

  The last bit that enables this support is still missing here while we
  wait for some last dependencies to make it into the mainline kernel
  through other subsystems.

  The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
  at the point of allowing multiplatform kernels, this work gets
  completed here along with a few additional cleanup. At the same time,
  the s3c24xx and s3c64xx are now deprecated and expected to get removed
  in the future.

  The PXA and OMAP1 bits are in a separate branch because of
  dependencies. Once both branches are merged, only the three Intel
  StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
  need separate kernels, and there are no plans to include these"

* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: ixp4xx: Consolidate Kconfig fixing issue
  ARM: versatile: Add missing of_node_put in dcscb_init
  ARM: config: Refresh IXP4xx config after multiplatform
  ARM: omap1: add back omap_set_dma_priority() stub
  ARM: omap: fix missing declaration warnings
  ARM: omap: fix address space warnings from sparse
  ARM: spear: remove include/mach/ subdirectory
  ARM: davinci: remove include/mach/ subdirectory
  ARM: omap2: remove include/mach/ subdirectory
  integrator: remove empty ap_init_early()
  ARM: s3c: fix include path
  MAINTAINERS: omap1: Add Janusz as an additional maintainer
  ARM: omap1: htc_herald: fix typos in comments
  ARM: OMAP1: fix typos in comments
  ARM: OMAP1: clock: Remove noop code
  ARM: OMAP1: clock: Remove unused code
  ARM: OMAP1: clock: Fix UART rate reporting algorithm
  ARM: OMAP1: clock: Fix early UART rate issues
  ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
  ARM: omap1: fix build with no SoC selected
  ...

MAINTAINERS

@@ -1526,10 +1526,7 @@ F:	Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
 F:	arch/arm/boot/dts/arm-realview-*
 F:	arch/arm/boot/dts/integrator*
 F:	arch/arm/boot/dts/versatile*
-F:	arch/arm/mach-integrator/
-F:	arch/arm/mach-realview/
 F:	arch/arm/mach-versatile/
-F:	arch/arm/plat-versatile/
 F:	drivers/bus/arm-integrator-lm.c
 F:	drivers/clk/versatile/
 F:	drivers/i2c/busses/i2c-versatile.c
@@ -14510,6 +14507,7 @@ F:	arch/arm/boot/dts/am335x-nano.dts
 
 OMAP1 SUPPORT
 M:	Aaro Koskinen <aaro.koskinen@iki.fi>
+M:	Janusz Krzysztofik <jmkrzyszt@gmail.com>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained

arch/arm/Kconfig

@@ -347,22 +347,9 @@ config ARCH_MULTIPLATFORM
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_SPARSEMEM_ENABLE
-	select ARM_AMBA
-	imply ARM_PATCH_PHYS_VIRT
-	select ARM_VIC
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select CPU_ARM920T
-	select GPIOLIB
-	select COMMON_CLK
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
 config ARCH_FOOTBRIDGE
 	bool "FootBridge"
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_SA110
 	select FOOTBRIDGE
 	select NEED_MACH_MEMORY_H
@@ -370,49 +357,9 @@ config ARCH_FOOTBRIDGE
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
 
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	select CPU_XSCALE
-	select GPIO_IOP
-	select GPIOLIB
-	select FORCE_PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select ARM_PATCH_PHYS_VIRT
-	select CPU_XSCALE
-	select GPIO_IXP4XX
-	select GPIOLIB
-	select HAVE_PCI
-	select IXP4XX_IRQ
-	select IXP4XX_TIMER
-	select SPARSE_IRQ
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select CPU_PJ4
-	select GPIOLIB
-	select HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	select SPARSE_IRQ
-	select PM_GENERIC_DOMAINS if PM
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
+	depends on CPU_LITTLE_ENDIAN
 	select ARCH_MTD_XIP
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
@@ -432,6 +379,7 @@ config ARCH_PXA
 config ARCH_RPC
 	bool "RiscPC"
 	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
+	depends on CPU_LITTLE_ENDIAN
 	select ARCH_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
 	select ARCH_SPARSEMEM_ENABLE
@@ -450,6 +398,7 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
+	depends on CPU_LITTLE_ENDIAN
 	select ARCH_MTD_XIP
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKSRC_MMIO
@@ -466,33 +415,15 @@ config ARCH_SA1100
 	help
 	  Support for StrongARM 11x0 based boards.
 
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ATAGS
-	select CLKSRC_SAMSUNG_PWM
-	select GPIO_SAMSUNG
-	select GPIOLIB
-	select NEED_MACH_IO_H
-	select S3C2410_WATCHDOG
-	select SAMSUNG_ATAGS
-	select USE_OF
-	select WATCHDOG
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
 config ARCH_OMAP1
 	bool "TI OMAP1"
-	select ARCH_OMAP
+	depends on CPU_LITTLE_ENDIAN
 	select CLKSRC_MMIO
+	select FORCE_PCI if PCCARD
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB
 	select HAVE_LEGACY_CLK
 	select IRQ_DOMAIN
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
 	help
 	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
@@ -561,7 +492,6 @@ config ARCH_VIRT
 	select ARM_GIC_V3_ITS if PCI
 	select ARM_PSCI
 	select HAVE_ARM_ARCH_TIMER
-	select ARCH_SUPPORTS_BIG_ENDIAN
 
 config ARCH_AIROHA
 	bool "Airoha SoC Support"
@@ -622,8 +552,6 @@ source "arch/arm/mach-hisi/Kconfig"
 
 source "arch/arm/mach-imx/Kconfig"
 
-source "arch/arm/mach-integrator/Kconfig"
-
 source "arch/arm/mach-iop32x/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
@@ -656,8 +584,6 @@ source "arch/arm/mach-npcm/Kconfig"
 
 source "arch/arm/mach-nspire/Kconfig"
 
-source "arch/arm/plat-omap/Kconfig"
-
 source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
@@ -675,8 +601,6 @@ source "arch/arm/mach-rda/Kconfig"
 
 source "arch/arm/mach-realtek/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
-
 source "arch/arm/mach-rockchip/Kconfig"
 
 source "arch/arm/mach-s3c/Kconfig"
@@ -705,8 +629,6 @@ source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-zynq/Kconfig"
@@ -739,9 +661,6 @@ config ARCH_MPS2
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO

arch/arm/Kconfig.debug

@@ -1859,9 +1859,9 @@ config DEBUG_UART_VIRT
 	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
+	default 0xff0b0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \

arch/arm/Makefile

@@ -179,7 +179,6 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
 machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
@@ -187,7 +186,6 @@ machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
 machine-$(CONFIG_ARCH_MMP)		+= mmp
-machine-$(CONFIG_ARCH_MPS2)		+= vexpress
 machine-$(CONFIG_ARCH_MOXART)		+= moxart
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
@@ -207,7 +205,6 @@ machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
 machine-$(CONFIG_ARCH_RDA)		+= rda
 machine-$(CONFIG_ARCH_REALTEK)		+= realtek
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
 machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
@@ -220,18 +217,15 @@ machine-$(CONFIG_ARCH_STM32)		+= stm32
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_OMAP)	+= omap
 plat-$(CONFIG_PLAT_ORION)	+= orion
 plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)

arch/arm/mach-ep93xx/include/mach/uncompress.h → arch/arm/boot/compressed/misc-ep93xx.h

 /* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
- * arch/arm/mach-ep93xx/include/mach/uncompress.h
- *
  * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
  */
 
-#include <mach/ep93xx-regs.h>
 #include <asm/mach-types.h>
 
-static unsigned char __raw_readb(unsigned int ptr)
-{
-	return *((volatile unsigned char *)ptr);
-}
-
-static unsigned int __raw_readl(unsigned int ptr)
+static inline unsigned int __raw_readl(unsigned int ptr)
 {
 	return *((volatile unsigned int *)ptr);
 }
 
-static void __raw_writeb(unsigned char value, unsigned int ptr)
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
 {
 	*((volatile unsigned char *)ptr) = value;
 }
 
-static void __raw_writel(unsigned int value, unsigned int ptr)
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
 {
 	*((volatile unsigned int *)ptr) = value;
 }
 
-#define PHYS_UART_DATA		(CONFIG_DEBUG_UART_PHYS + 0x00)
-#define PHYS_UART_FLAG		(CONFIG_DEBUG_UART_PHYS + 0x18)
-#define UART_FLAG_TXFF		0x20
-
-static inline void putc(int c)
-{
-	int i;
-
-	for (i = 0; i < 10000; i++) {
-		/* Transmit fifo not full? */
-		if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
-			break;
-	}
-
-	__raw_writeb(c, PHYS_UART_DATA);
-}
-
-static inline void flush(void)
-{
-}
-
-
 /*
  * Some bootloaders don't turn off DMA from the ethernet MAC before
  * jumping to linux, which means that we might end up with bits of RX
@@ -59,7 +29,7 @@ static inline void flush(void)
 #define PHYS_ETH_SELF_CTL		0x80010020
 #define ETH_SELF_CTL_RESET		0x00000001
 
-static void ethernet_reset(void)
+static inline void ep93xx_ethernet_reset(void)
 {
 	unsigned int v;
 
@@ -76,15 +46,41 @@ static void ethernet_reset(void)
 #define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
 #define TS72XX_WDT_FEED_VAL		0x05
 
-static void __maybe_unused ts72xx_watchdog_disable(void)
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
 {
 	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
 	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
 }
 
-static void arch_decomp_setup(void)
+static inline void ep93xx_decomp_setup(void)
 {
 	if (machine_is_ts72xx())
 		ts72xx_watchdog_disable();
-	ethernet_reset();
+
+	if (machine_is_adssphere() ||
+	    machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_gesbc9312() ||
+	    machine_is_micro9() ||
+	    machine_is_micro9l() ||
+	    machine_is_micro9m() ||
+	    machine_is_micro9s() ||
+	    machine_is_micro9m() ||
+	    machine_is_micro9l() ||
+	    machine_is_micro9s() ||
+	    machine_is_sim_one() ||
+	    machine_is_snapper_cl15() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
 }

arch/arm/boot/compressed/misc.c

@@ -23,6 +23,7 @@ unsigned int __machine_arch_type;
 #include <linux/types.h>
 #include <linux/linkage.h>
 #include "misc.h"
+#include "misc-ep93xx.h"
 
 static void putstr(const char *ptr);
 
@@ -143,6 +144,9 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");

arch/arm/configs/dove_defconfig

@@ -8,6 +8,8 @@ CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ARCH_MULTI_V6 is not set
+CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_DOVE=y
 CONFIG_MACH_DOVE_DB=y
 CONFIG_MACH_CM_A510=y

arch/arm/configs/ep93xx_defconfig

@@ -11,6 +11,8 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_EP93XX=y
 CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9301=y

arch/arm/configs/iop32x_defconfig

@@ -7,6 +7,7 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_IOP32X=y
 CONFIG_MACH_GLANTANK=y
 CONFIG_ARCH_IQ80321=y

arch/arm/configs/ixp4xx_defconfig

+CONFIG_KERNEL_XZ=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_COMPRESSION_XZ=y
 CONFIG_EXPERT=y
-CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_IXP4XX=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_LOFT=y
-CONFIG_ARCH_ADI_COYOTE=y
-CONFIG_MACH_GATEWAY7001=y
-CONFIG_MACH_WG302V2=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_MACH_IXDPG425=y
-CONFIG_MACH_IXDP465=y
-CONFIG_MACH_KIXRP435=y
-CONFIG_ARCH_PRPMC1100=y
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GTWX5715=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_NPE=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 ip=bootp root=/dev/nfs"
-CONFIG_FPE_NWFPE=y
+CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_STRICT_KERNEL_RWX=y
+CONFIG_STRICT_MODULE_RWX=y
+CONFIG_MODULES=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -43,8 +29,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
@@ -65,7 +49,6 @@ CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -76,14 +59,12 @@ CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
-CONFIG_IPX=m
 CONFIG_ATALK=m
 CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_X25=m
 CONFIG_LAPB=m
-CONFIG_WAN_ROUTER=m
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_HTB=m
@@ -104,91 +85,92 @@ CONFIG_NET_CLS_RSVP6=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
 CONFIG_NET_PKTGEN=m
+CONFIG_DEVTMPFS=y
 CONFIG_MTD=y
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_IXP4XX=y
+CONFIG_MTD_PHYSMAP_IXP4XX=y
 CONFIG_MTD_RAW_NAND=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_LEGACY=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_ATA=y
-CONFIG_SATA_VIA=y
-CONFIG_PATA_ARTOP=y
-CONFIG_PATA_CMD64X=y
-CONFIG_PATA_HPT366=y
-CONFIG_PATA_HPT37X=y
-CONFIG_PATA_HPT3X2N=y
-CONFIG_PATA_PDC2027X=y
 CONFIG_PATA_IXP4XX_CF=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+CONFIG_ATM_TCP=m
 CONFIG_IXP4XX_ETH=y
-CONFIG_NET_PCI=y
 CONFIG_WAN=y
-CONFIG_HDLC=m
+CONFIG_HDLC=y
 CONFIG_HDLC_RAW=m
 CONFIG_HDLC_CISCO=m
 CONFIG_HDLC_FR=m
 CONFIG_HDLC_PPP=m
-CONFIG_HDLC_X25=m
-CONFIG_WAN_ROUTER_DRIVERS=m
-CONFIG_ATM_TCP=m
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_IXP4XX_HSS=m
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
-CONFIG_INPUT_IXP4XX_BEEPER=y
 # CONFIG_SERIO is not set
 # CONFIG_VT is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
+CONFIG_HW_RANDOM=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_GPIO_GW_PLD=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_SENSORS_AD7418=y
 CONFIG_SENSORS_W83781D=y
 CONFIG_WATCHDOG=y
 CONFIG_IXP4XX_WATCHDOG=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1672=y
 CONFIG_RTC_DRV_ISL1208=y
 CONFIG_RTC_DRV_X1205=y
 CONFIG_RTC_DRV_PCF8563=y
+CONFIG_IXP4XX_QMGR=y
+CONFIG_IXP4XX_NPE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_OVERLAY_FS=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XZ=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
+CONFIG_CRYPTO_DEV_IXP4XX=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_LL=y
 CONFIG_DEBUG_LL_UART_8250=y

arch/arm/configs/mini2440_defconfig

@@ -4,6 +4,8 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
 # CONFIG_CPU_S3C2410 is not set

arch/arm/configs/s3c2410_defconfig

@@ -4,6 +4,9 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_S3C_ADC=y
 CONFIG_CPU_S3C2412=y

arch/arm/configs/tct_hammer_defconfig

@@ -13,6 +13,8 @@ CONFIG_SLOB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V4T=y
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_S3C24XX=y
 CONFIG_MACH_TCT_HAMMER=y
 CONFIG_ZBOOT_ROM_TEXT=0x0

arch/arm/mach-asm9260/Kconfig

@@ -2,6 +2,7 @@
 config MACH_ASM9260
 	bool "Alphascale ASM9260"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_ARM926T
 	select ASM9260_TIMER
 	help

arch/arm/mach-aspeed/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_ASPEED
 	bool "Aspeed BMC architectures"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select SRAM
 	select WATCHDOG
 	select ASPEED_WATCHDOG

arch/arm/mach-at91/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_AT91
 	bool "AT91/Microchip SoCs"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
+		ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
 	select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
 	select COMMON_CLK_AT91
 	select GPIOLIB

arch/arm/mach-clps711x/Kconfig

@@ -2,6 +2,7 @@
 menuconfig ARCH_CLPS711X
 	bool "Cirrus Logic EP721x/EP731x-based"
 	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
 	select CLPS711X_TIMER
 	select CPU_ARM720T
 	select GPIOLIB

arch/arm/mach-davinci/Kconfig

@@ -3,6 +3,7 @@
 menuconfig ARCH_DAVINCI
 	bool "TI DaVinci"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select DAVINCI_TIMER
 	select ZONE_DMA
 	select PM_GENERIC_DOMAINS if PM

arch/arm/mach-davinci/Makefile

@@ -3,9 +3,7 @@
 # Makefile for the linux kernel.
 #
 #
-
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-
+#
 # Common objects
 obj-y 					:= serial.o usb.o common.o sram.o
 

arch/arm/mach-davinci/board-da830-evm.c

@@ -36,10 +36,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/mux.h>
-#include <mach/da8xx.h>
-
+#include "common.h"
+#include "mux.h"
+#include "da8xx.h"
 #include "irqs.h"
 
 #define DA830_EVM_PHY_ID		""

arch/arm/mach-davinci/board-da850-evm.c

@@ -43,10 +43,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
 #include "irqs.h"
 #include "sram.h"
 

arch/arm/mach-davinci/board-dm355-evm.c

@@ -33,9 +33,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/serial.h>
-#include <mach/common.h>
-
+#include "serial.h"
+#include "common.h"
 #include "davinci.h"
 
 /* NOTE:  this is geared for the standard config, with a socketed

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -27,9 +27,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/serial.h>
-
+#include "common.h"
+#include "serial.h"
 #include "davinci.h"
 
 /* NOTE:  this is geared for the standard config, with a socketed

arch/arm/mach-davinci/board-dm365-evm.c

@@ -36,10 +36,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/mux.h>
-#include <mach/common.h>
 #include <linux/platform_data/i2c-davinci.h>
-#include <mach/serial.h>
 #include <linux/platform_data/mmc-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/keyscan-davinci.h>
@@ -47,6 +44,9 @@
 #include <media/i2c/ths7303.h>
 #include <media/i2c/tvp514x.h>
 
+#include "mux.h"
+#include "common.h"
+#include "serial.h"
 #include "davinci.h"
 
 static inline int have_imager(void)

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -37,10 +37,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
 #include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mmc-davinci.h>
@@ -49,6 +45,9 @@
 #include <linux/platform_data/ti-aemif.h>
 
 #include "davinci.h"
+#include "common.h"
+#include "mux.h"
+#include "serial.h"
 #include "irqs.h"
 
 #define DM644X_EVM_PHY_ID		"davinci_mdio-0:01"

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -43,9 +43,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/serial.h>
-
+#include "common.h"
+#include "serial.h"
 #include "davinci.h"
 #include "irqs.h"
 

arch/arm/mach-davinci/board-mityomapl138.c

@@ -28,12 +28,14 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/common.h>
-#include <mach/da8xx.h>
+
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
+
 #include <linux/platform_data/mtd-davinci.h>
 #include <linux/platform_data/mtd-davinci-aemif.h>
 #include <linux/platform_data/ti-aemif.h>
-#include <mach/mux.h>
 #include <linux/platform_data/spi-davinci.h>
 
 #define MITYOMAPL138_PHY_ID		""

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -36,10 +36,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
-
+#include "common.h"
+#include "serial.h"
+#include "mux.h"
 #include "davinci.h"
 
 #define NEUROS_OSD2_PHY_ID		"davinci_mdio-0:01"

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -27,9 +27,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
 
 #define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
 

arch/arm/mach-davinci/board-sffsdr.c

@@ -22,12 +22,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <mach/common.h>
 #include <linux/platform_data/i2c-davinci.h>
-#include <mach/serial.h>
-#include <mach/mux.h>
 #include <linux/platform_data/usb-davinci.h>
 
+#include "common.h"
+#include "serial.h"
+#include "mux.h"
 #include "davinci.h"
 
 #define SFFSDR_PHY_ID		"davinci_mdio-0:01"

arch/arm/mach-davinci/common.c

@@ -17,8 +17,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
+#include "common.h"
+#include "cputype.h"
 
 struct davinci_soc_info davinci_soc_info;
 EXPORT_SYMBOL(davinci_soc_info);

arch/arm/mach-davinci/include/mach/cputype.h → arch/arm/mach-davinci/cputype.h

@@ -16,7 +16,7 @@
 #ifndef _ASM_ARCH_CPU_H
 #define _ASM_ARCH_CPU_H
 
-#include <mach/common.h>
+#include "common.h"
 
 struct davinci_id {
 	u8	variant;	/* JTAG ID bits 31:28 */

arch/arm/mach-davinci/da830.c

@@ -16,14 +16,13 @@
 #include <linux/irqchip/irq-davinci-cp-intc.h>
 #include <linux/platform_data/gpio-davinci.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "irqs.h"
 #include "mux.h"
 

arch/arm/mach-davinci/da850.c

@@ -28,16 +28,14 @@
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
+#include <clocksource/timer-davinci.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-#include <mach/pm.h>
-
-#include <clocksource/timer-davinci.h>
-
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
+#include "pm.h"
 #include "irqs.h"
 #include "mux.h"
 

arch/arm/mach-davinci/da8xx-dt.c

@@ -7,8 +7,8 @@
 
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
+#include "common.h"
+#include "da8xx.h"
 
 #ifdef CONFIG_ARCH_DAVINCI_DA850
 

arch/arm/mach-davinci/include/mach/da8xx.h → arch/arm/mach-davinci/da8xx.h

@@ -21,8 +21,9 @@
 #include <linux/regmap.h>
 #include <linux/videodev2.h>
 
-#include <mach/serial.h>
-#include <mach/pm.h>
+#include "serial.h"
+#include "pm.h"
+
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/i2c-davinci.h>
 #include <linux/platform_data/mmc-davinci.h>

arch/arm/mach-davinci/davinci.h

@@ -25,7 +25,8 @@
 #include <linux/platform_data/davinci_asp.h>
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/keyscan-davinci.h>
-#include <mach/hardware.h>
+
+#include "hardware.h"
 
 #include <media/davinci/vpfe_capture.h>
 #include <media/davinci/vpif_types.h>

arch/arm/mach-davinci/devices-da8xx.c

@@ -18,10 +18,9 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "asp.h"
 #include "cpuidle.h"
 #include "irqs.h"

arch/arm/mach-davinci/devices.c

@@ -14,10 +14,9 @@
 #include <linux/io.h>
 #include <linux/reboot.h>
 
-#include <mach/hardware.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-
+#include "hardware.h"
+#include "cputype.h"
+#include "mux.h"
 #include "davinci.h"
 #include "irqs.h"
 

arch/arm/mach-davinci/dm355.c

@@ -24,15 +24,13 @@
 #include <linux/serial_8250.h>
 #include <linux/spi/spi.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "serial.h"
 #include "asp.h"
 #include "davinci.h"
 #include "irqs.h"

arch/arm/mach-davinci/dm365.c

@@ -29,15 +29,13 @@
 #include <linux/serial_8250.h>
 #include <linux/spi/spi.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "serial.h"
 #include "asp.h"
 #include "davinci.h"
 #include "irqs.h"

arch/arm/mach-davinci/dm644x.c

@@ -21,15 +21,13 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "serial.h"
 #include "asp.h"
 #include "davinci.h"
 #include "irqs.h"

arch/arm/mach-davinci/dm646x.c

@@ -22,15 +22,13 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/mux.h>
-#include <mach/serial.h>
-
 #include <clocksource/timer-davinci.h>
 
+#include <asm/mach/map.h>
+
+#include "common.h"
+#include "cputype.h"
+#include "serial.h"
 #include "asp.h"
 #include "davinci.h"
 #include "irqs.h"

arch/arm/mach-davinci/include/mach/uncompress.h

-/*
- * Serial port stubs for kernel decompress status messages
- *
- * Initially based on:
- * arch/arm/plat-omap/include/mach/uncompress.h
- *
- * Original copyrights follow.
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * Rewritten by:
- * Author: <source@mvista.com>
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/serial.h>
-
-#define IOMEM(x)	((void __force __iomem *)(x))
-
-u32 *uart;
-
-/* PORT_16C550A, in polled non-fifo mode */
-static inline void putc(char c)
-{
-	if (!uart)
-		return;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-	uart[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-	if (!uart)
-		return;
-
-	while (!(uart[UART_LSR] & UART_LSR_THRE))
-		barrier();
-}
-
-static inline void set_uart_info(u32 phys)
-{
-	uart = (u32 *)phys;
-}
-
-#define _DEBUG_LL_ENTRY(machine, phys)				\
-	{							\
-		if (machine_is_##machine()) {			\
-			set_uart_info(phys);			\
-			break;					\
-		}						\
-	}
-
-#define DEBUG_LL_DAVINCI(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DAVINCI_UART##port##_BASE)
-
-#define DEBUG_LL_DA8XX(machine, port)				\
-	_DEBUG_LL_ENTRY(machine, DA8XX_UART##port##_BASE)
-
-static inline void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Initialize the port based on the machine ID from the bootloader.
-	 * Note that we're using macros here instead of switch statement
-	 * as machine_is functions are optimized out for the boards that
-	 * are not selected.
-	 */
-	do {
-		/* Davinci boards */
-		DEBUG_LL_DAVINCI(davinci_evm,		0);
-		DEBUG_LL_DAVINCI(sffsdr,		0);
-		DEBUG_LL_DAVINCI(neuros_osd2,		0);
-		DEBUG_LL_DAVINCI(davinci_dm355_evm,	0);
-		DEBUG_LL_DAVINCI(dm355_leopard,		0);
-		DEBUG_LL_DAVINCI(davinci_dm6467_evm,	0);
-		DEBUG_LL_DAVINCI(davinci_dm365_evm,	0);
-
-		/* DA8xx boards */
-		DEBUG_LL_DA8XX(davinci_da830_evm,	2);
-		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
-		DEBUG_LL_DA8XX(mityomapl138,		1);
-		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
-	} while (0);
-}
-
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)

arch/arm/mach-davinci/mux.c

@@ -22,8 +22,8 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <mach/mux.h>
-#include <mach/common.h>
+#include "mux.h"
+#include "common.h"
 
 static void __iomem *pinmux_base;
 

arch/arm/mach-davinci/pdata-quirks.c

@@ -10,8 +10,8 @@
 #include <media/i2c/tvp514x.h>
 #include <media/i2c/adv7343.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
+#include "common.h"
+#include "da8xx.h"
 
 struct pdata_init {
 	const char *compatible;

arch/arm/mach-davinci/pm.c

@@ -16,11 +16,10 @@
 #include <asm/delay.h>
 #include <asm/io.h>
 
-#include <mach/common.h>
-#include <mach/da8xx.h>
-#include <mach/mux.h>
-#include <mach/pm.h>
-
+#include "common.h"
+#include "da8xx.h"
+#include "mux.h"
+#include "pm.h"
 #include "clock.h"
 #include "psc.h"
 #include "sram.h"

arch/arm/mach-davinci/serial.c

@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/serial.h>
-#include <mach/cputype.h>
+#include "serial.h"
+#include "cputype.h"
 
 static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
 				    int value)

arch/arm/mach-davinci/include/mach/serial.h → arch/arm/mach-davinci/serial.h

@@ -13,7 +13,7 @@
 
 #include <asm/memory.h>
 
-#include <mach/hardware.h>
+#include "hardware.h"
 
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)

arch/arm/mach-davinci/sram.c

@@ -9,7 +9,7 @@
 #include <linux/io.h>
 #include <linux/genalloc.h>
 
-#include <mach/common.h>
+#include "common.h"
 #include "sram.h"
 
 static struct gen_pool *sram_pool;

arch/arm/mach-davinci/usb-da8xx.c

@@ -15,10 +15,9 @@
 #include <linux/platform_device.h>
 #include <linux/usb/musb.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-#include <mach/da8xx.h>
-
+#include "common.h"
+#include "cputype.h"
+#include "da8xx.h"
 #include "irqs.h"
 
 #define DA8XX_USB0_BASE		0x01e00000

arch/arm/mach-davinci/usb.c

@@ -8,9 +8,8 @@
 #include <linux/platform_data/usb-davinci.h>
 #include <linux/usb/musb.h>
 
-#include <mach/common.h>
-#include <mach/cputype.h>
-
+#include "common.h"
+#include "cputype.h"
 #include "irqs.h"
 
 #define DAVINCI_USB_OTG_BASE	0x01c64000

arch/arm/mach-dove/Kconfig

 # SPDX-License-Identifier: GPL-2.0
-if ARCH_DOVE
+menuconfig ARCH_DOVE
+	bool "Marvell Dove" if ARCH_MULTI_V7
+	select CPU_PJ4
+	select GPIOLIB
+	select MVEBU_MBUS
+	select PINCTRL
+	select PINCTRL_DOVE
+	select PLAT_ORION_LEGACY
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  Support for the Marvell Dove SoC 88AP510
 
-menu "Marvell Dove Implementations"
+if ARCH_DOVE
 
 config DOVE_LEGACY
 	bool
@@ -21,6 +31,4 @@ config MACH_CM_A510
 	  Say 'Y' here if you want your kernel to support the
 	  CompuLab CM-A510 Board.
 
-endmenu
-
 endif

arch/arm/mach-dove/Makefile

 # SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o
 obj-$(CONFIG_DOVE_LEGACY)	+= irq.o mpp.o
 obj-$(CONFIG_PCI)		+= pcie.o

arch/arm/mach-dove/include/mach/uncompress.h

-/*
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define UART0_PHYS_BASE (0xf1000000 + 0x12000)
-
-#define UART_THR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x0))
-#define UART_LSR ((volatile unsigned char *)(UART0_PHYS_BASE + 0x14))
-
-#define LSR_THRE	0x20
-
-static inline void putc(const char c)
-{
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		/* Transmit fifo not full? */
-		if (*UART_LSR & LSR_THRE)
-			break;
-	}
-
-	*UART_THR = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()

arch/arm/mach-ep93xx/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_EP93XX
+	bool "EP93xx-based"
+	depends on ARCH_MULTI_V4T
+	depends on CPU_LITTLE_ENDIAN
+	select ARCH_SPARSEMEM_ENABLE
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_MMIO
+	select CPU_ARM920T
+	select GPIOLIB
+	help
+	  This enables support for the Cirrus EP93xx series of CPUs.
+
 if ARCH_EP93XX
 
 menu "Cirrus EP93xx Implementation Options"

arch/arm/mach-ep93xx/adssphere.c

@@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
 MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-ep93xx/core.c

@@ -47,6 +47,7 @@
 #include <asm/mach/map.h>
 
 #include "soc.h"
+#include "irqs.h"
 
 /*************************************************************************
  * Static I/O mappings that are needed for all EP93xx platforms
@@ -75,8 +76,8 @@ void __init ep93xx_map_io(void)
  *************************************************************************/
 void __init ep93xx_init_irq(void)
 {
-	vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
-	vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC1_BASE, IRQ_EP93XX_VIC0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+	vic_init(EP93XX_VIC2_BASE, IRQ_EP93XX_VIC1, EP93XX_VIC2_VALID_IRQ_MASK, 0);
 }
 
 

arch/arm/mach-ep93xx/edb93xx.c

@@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
 MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -255,6 +256,7 @@ MACHINE_END
 MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	/* Maintainer: George Kashperko <george@chas.com.ua> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -267,6 +269,7 @@ MACHINE_END
 MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -279,6 +282,7 @@ MACHINE_END
 MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -291,6 +295,7 @@ MACHINE_END
 MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -303,6 +308,7 @@ MACHINE_END
 MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -315,6 +321,7 @@ MACHINE_END
 MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -327,6 +334,7 @@ MACHINE_END
 MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h → arch/arm/mach-ep93xx/ep93xx-regs.h

 /* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
- */
-
 #ifndef __ASM_ARCH_EP93XX_REGS_H
 #define __ASM_ARCH_EP93XX_REGS_H
 

arch/arm/mach-ep93xx/gesbc9312.c

@@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
 MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-ep93xx/gpio-ep93xx.h

@@ -4,7 +4,7 @@
 #ifndef __GPIO_EP93XX_H
 #define __GPIO_EP93XX_H
 
-#include <mach/ep93xx-regs.h>
+#include "ep93xx-regs.h"
 
 #define EP93XX_GPIO_PHYS_BASE		EP93XX_APB_PHYS(0x00040000)
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)

arch/arm/mach-ep93xx/include/mach/irqs.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_EP93XX_COMMRX		2
-#define IRQ_EP93XX_COMMTX		3
-#define IRQ_EP93XX_TIMER1		4
-#define IRQ_EP93XX_TIMER2		5
-#define IRQ_EP93XX_AACINTR		6
-#define IRQ_EP93XX_DMAM2P0		7
-#define IRQ_EP93XX_DMAM2P1		8
-#define IRQ_EP93XX_DMAM2P2		9
-#define IRQ_EP93XX_DMAM2P3		10
-#define IRQ_EP93XX_DMAM2P4		11
-#define IRQ_EP93XX_DMAM2P5		12
-#define IRQ_EP93XX_DMAM2P6		13
-#define IRQ_EP93XX_DMAM2P7		14
-#define IRQ_EP93XX_DMAM2P8		15
-#define IRQ_EP93XX_DMAM2P9		16
-#define IRQ_EP93XX_DMAM2M0		17
-#define IRQ_EP93XX_DMAM2M1		18
-#define IRQ_EP93XX_GPIO0MUX		19
-#define IRQ_EP93XX_GPIO1MUX		20
-#define IRQ_EP93XX_GPIO2MUX		21
-#define IRQ_EP93XX_GPIO3MUX		22
-#define IRQ_EP93XX_UART1RX		23
-#define IRQ_EP93XX_UART1TX		24
-#define IRQ_EP93XX_UART2RX		25
-#define IRQ_EP93XX_UART2TX		26
-#define IRQ_EP93XX_UART3RX		27
-#define IRQ_EP93XX_UART3TX		28
-#define IRQ_EP93XX_KEY			29
-#define IRQ_EP93XX_TOUCH		30
-#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
-
-#define IRQ_EP93XX_EXT0			32
-#define IRQ_EP93XX_EXT1			33
-#define IRQ_EP93XX_EXT2			34
-#define IRQ_EP93XX_64HZ			35
-#define IRQ_EP93XX_WATCHDOG		36
-#define IRQ_EP93XX_RTC			37
-#define IRQ_EP93XX_IRDA			38
-#define IRQ_EP93XX_ETHERNET		39
-#define IRQ_EP93XX_EXT3			40
-#define IRQ_EP93XX_PROG			41
-#define IRQ_EP93XX_1HZ			42
-#define IRQ_EP93XX_VSYNC		43
-#define IRQ_EP93XX_VIDEO_FIFO		44
-#define IRQ_EP93XX_SSP1RX		45
-#define IRQ_EP93XX_SSP1TX		46
-#define IRQ_EP93XX_GPIO4MUX		47
-#define IRQ_EP93XX_GPIO5MUX		48
-#define IRQ_EP93XX_GPIO6MUX		49
-#define IRQ_EP93XX_GPIO7MUX		50
-#define IRQ_EP93XX_TIMER3		51
-#define IRQ_EP93XX_UART1		52
-#define IRQ_EP93XX_SSP			53
-#define IRQ_EP93XX_UART2		54
-#define IRQ_EP93XX_UART3		55
-#define IRQ_EP93XX_USB			56
-#define IRQ_EP93XX_ETHERNET_PME		57
-#define IRQ_EP93XX_DSP			58
-#define IRQ_EP93XX_GPIO_AB		59
-#define IRQ_EP93XX_SAI			60
-#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
-
-#define NR_EP93XX_IRQS			(64 + 24)
-
-#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
-#define EP93XX_BOARD_IRQS		32
-
-#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
-#endif

arch/arm/mach-ep93xx/irqs.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_VIC0			1
+
+#define IRQ_EP93XX_COMMRX		(IRQ_EP93XX_VIC0 + 2)
+#define IRQ_EP93XX_COMMTX		(IRQ_EP93XX_VIC0 + 3)
+#define IRQ_EP93XX_TIMER1		(IRQ_EP93XX_VIC0 + 4)
+#define IRQ_EP93XX_TIMER2		(IRQ_EP93XX_VIC0 + 5)
+#define IRQ_EP93XX_AACINTR		(IRQ_EP93XX_VIC0 + 6)
+#define IRQ_EP93XX_DMAM2P0		(IRQ_EP93XX_VIC0 + 7)
+#define IRQ_EP93XX_DMAM2P1		(IRQ_EP93XX_VIC0 + 8)
+#define IRQ_EP93XX_DMAM2P2		(IRQ_EP93XX_VIC0 + 9)
+#define IRQ_EP93XX_DMAM2P3		(IRQ_EP93XX_VIC0 + 10)
+#define IRQ_EP93XX_DMAM2P4		(IRQ_EP93XX_VIC0 + 11)
+#define IRQ_EP93XX_DMAM2P5		(IRQ_EP93XX_VIC0 + 12)
+#define IRQ_EP93XX_DMAM2P6		(IRQ_EP93XX_VIC0 + 13)
+#define IRQ_EP93XX_DMAM2P7		(IRQ_EP93XX_VIC0 + 14)
+#define IRQ_EP93XX_DMAM2P8		(IRQ_EP93XX_VIC0 + 15)
+#define IRQ_EP93XX_DMAM2P9		(IRQ_EP93XX_VIC0 + 16)
+#define IRQ_EP93XX_DMAM2M0		(IRQ_EP93XX_VIC0 + 17)
+#define IRQ_EP93XX_DMAM2M1		(IRQ_EP93XX_VIC0 + 18)
+#define IRQ_EP93XX_GPIO0MUX		(IRQ_EP93XX_VIC0 + 19)
+#define IRQ_EP93XX_GPIO1MUX		(IRQ_EP93XX_VIC0 + 20)
+#define IRQ_EP93XX_GPIO2MUX		(IRQ_EP93XX_VIC0 + 21)
+#define IRQ_EP93XX_GPIO3MUX		(IRQ_EP93XX_VIC0 + 22)
+#define IRQ_EP93XX_UART1RX		(IRQ_EP93XX_VIC0 + 23)
+#define IRQ_EP93XX_UART1TX		(IRQ_EP93XX_VIC0 + 24)
+#define IRQ_EP93XX_UART2RX		(IRQ_EP93XX_VIC0 + 25)
+#define IRQ_EP93XX_UART2TX		(IRQ_EP93XX_VIC0 + 26)
+#define IRQ_EP93XX_UART3RX		(IRQ_EP93XX_VIC0 + 27)
+#define IRQ_EP93XX_UART3TX		(IRQ_EP93XX_VIC0 + 28)
+#define IRQ_EP93XX_KEY			(IRQ_EP93XX_VIC0 + 29)
+#define IRQ_EP93XX_TOUCH		(IRQ_EP93XX_VIC0 + 30)
+#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
+
+#define IRQ_EP93XX_VIC1			(IRQ_EP93XX_VIC0 + 32)
+
+#define IRQ_EP93XX_EXT0			(IRQ_EP93XX_VIC1 + 0)
+#define IRQ_EP93XX_EXT1			(IRQ_EP93XX_VIC1 + 1)
+#define IRQ_EP93XX_EXT2			(IRQ_EP93XX_VIC1 + 2)
+#define IRQ_EP93XX_64HZ			(IRQ_EP93XX_VIC1 + 3)
+#define IRQ_EP93XX_WATCHDOG		(IRQ_EP93XX_VIC1 + 4)
+#define IRQ_EP93XX_RTC			(IRQ_EP93XX_VIC1 + 5)
+#define IRQ_EP93XX_IRDA			(IRQ_EP93XX_VIC1 + 6)
+#define IRQ_EP93XX_ETHERNET		(IRQ_EP93XX_VIC1 + 7)
+#define IRQ_EP93XX_EXT3			(IRQ_EP93XX_VIC1 + 8)
+#define IRQ_EP93XX_PROG			(IRQ_EP93XX_VIC1 + 9)
+#define IRQ_EP93XX_1HZ			(IRQ_EP93XX_VIC1 + 10)
+#define IRQ_EP93XX_VSYNC		(IRQ_EP93XX_VIC1 + 11)
+#define IRQ_EP93XX_VIDEO_FIFO		(IRQ_EP93XX_VIC1 + 12)
+#define IRQ_EP93XX_SSP1RX		(IRQ_EP93XX_VIC1 + 13)
+#define IRQ_EP93XX_SSP1TX		(IRQ_EP93XX_VIC1 + 14)
+#define IRQ_EP93XX_GPIO4MUX		(IRQ_EP93XX_VIC1 + 15)
+#define IRQ_EP93XX_GPIO5MUX		(IRQ_EP93XX_VIC1 + 16)
+#define IRQ_EP93XX_GPIO6MUX		(IRQ_EP93XX_VIC1 + 17)
+#define IRQ_EP93XX_GPIO7MUX		(IRQ_EP93XX_VIC1 + 18)
+#define IRQ_EP93XX_TIMER3		(IRQ_EP93XX_VIC1 + 19)
+#define IRQ_EP93XX_UART1		(IRQ_EP93XX_VIC1 + 20)
+#define IRQ_EP93XX_SSP			(IRQ_EP93XX_VIC1 + 21)
+#define IRQ_EP93XX_UART2		(IRQ_EP93XX_VIC1 + 22)
+#define IRQ_EP93XX_UART3		(IRQ_EP93XX_VIC1 + 23)
+#define IRQ_EP93XX_USB			(IRQ_EP93XX_VIC1 + 24)
+#define IRQ_EP93XX_ETHERNET_PME		(IRQ_EP93XX_VIC1 + 25)
+#define IRQ_EP93XX_DSP			(IRQ_EP93XX_VIC1 + 26)
+#define IRQ_EP93XX_GPIO_AB		(IRQ_EP93XX_VIC1 + 27)
+#define IRQ_EP93XX_SAI			(IRQ_EP93XX_VIC1 + 28)
+#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
+
+#define NR_EP93XX_IRQS			(IRQ_EP93XX_VIC1 + 32 + 24)
+
+#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS		32
+
+#endif

arch/arm/mach-ep93xx/micro9.c

@@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
 MACHINE_START(MICRO9, "Contec Micro9-High")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -88,6 +89,7 @@ MACHINE_END
 MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -100,6 +102,7 @@ MACHINE_END
 MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -112,6 +115,7 @@ MACHINE_END
 MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-ep93xx/simone.c

@@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
 MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-ep93xx/snappercl15.c

@@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
 MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	/* Maintainer: Ryan Mallon */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-ep93xx/soc.h

@@ -9,7 +9,8 @@
 #ifndef _EP93XX_SOC_H
 #define _EP93XX_SOC_H
 
-#include <mach/ep93xx-regs.h>
+#include "ep93xx-regs.h"
+#include "irqs.h"
 
 /*
  * EP93xx Physical Memory Map:

arch/arm/mach-ep93xx/ts72xx.c

@@ -22,7 +22,6 @@
 
 #include "gpio-ep93xx.h"
 #include "hardware.h"
-#include <mach/irqs.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
 MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,
@@ -413,6 +413,7 @@ static void __init bk3_init_machine(void)
 MACHINE_START(BK3, "Liebherr controller BK3.1")
 	/* Maintainer: Lukasz Majewski <lukma@denx.de> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS,
 	.map_io		= ts72xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -302,6 +302,7 @@ static void __init vision_init_machine(void)
 MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
 	.map_io		= vision_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.init_time	= ep93xx_timer_init,

arch/arm/mach-exynos/Kconfig

@@ -8,7 +8,6 @@
 menuconfig ARCH_EXYNOS
 	bool "Samsung Exynos"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
 	select EXYNOS_IRQ_COMBINER

arch/arm/mach-gemini/Kconfig

@@ -2,6 +2,7 @@
 menuconfig ARCH_GEMINI
 	bool "Cortina Systems Gemini"
 	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_AMBA
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed

arch/arm/mach-highbank/Kconfig

@@ -2,7 +2,6 @@
 config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)"
 	depends on ARCH_MULTI_V7
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420

arch/arm/mach-hisi/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 config ARCH_HISI
 	bool "Hisilicon SoC Support"
-	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
 	select ARM_AMBA
 	select ARM_GIC if ARCH_MULTI_V7
 	select ARM_TIMER_SP804

arch/arm/mach-imx/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MXC
 	bool "Freescale i.MX family"
-	depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
-	select ARCH_SUPPORTS_BIG_ENDIAN
+	depends on (ARCH_MULTI_V4_V5 && CPU_LITTLE_ENDIAN) || \
+		ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
 	select CLKSRC_IMX_GPT
 	select GENERIC_IRQ_CHIP
 	select GPIOLIB

arch/arm/mach-integrator/Kconfig

-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_INTEGRATOR
-	bool "ARM Ltd. Integrator family"
-	depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6
-	select ARM_AMBA
-	select CMA
-	select DMA_CMA
-	select HAVE_TCM
-	select CLK_ICST
-	select MFD_SYSCON
-	select PLAT_VERSATILE
-	select POWER_RESET
-	select POWER_RESET_VERSATILE
-	select POWER_SUPPLY
-	select SOC_INTEGRATOR_CM
-	select VERSATILE_FPGA_IRQ
-	help
-	  Support for ARM's Integrator platform.
-
-if ARCH_INTEGRATOR
-
-config ARCH_INTEGRATOR_AP
-	bool "Support Integrator/AP and Integrator/PP2 platforms"
-	select INTEGRATOR_AP_TIMER
-	select SERIAL_AMBA_PL010 if TTY
-	select SERIAL_AMBA_PL010_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator/AP and
-	  Integrator/PP2 platforms.
-
-config INTEGRATOR_IMPD1
-	bool "Include support for Integrator/IM-PD1"
-	depends on ARCH_INTEGRATOR_AP
-	select ARM_VIC
-	select GPIO_PL061
-	select GPIOLIB
-	select REGULATOR
-	select REGULATOR_FIXED_VOLTAGE
-	help
-	  The IM-PD1 is an add-on logic module for the Integrator which
-	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
-	  The IM-PD1 can be found on the Integrator/PP2 platform.
-
-config INTEGRATOR_CM720T
-	bool "Integrator/CM720T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM720T
-
-config INTEGRATOR_CM920T
-	bool "Integrator/CM920T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T
-	select CPU_ARM920T
-
-config INTEGRATOR_CM922T_XA10
-	bool "Integrator/CM922T-XA10 core module"
-	depends on ARCH_MULTI_V4T
-	depends on ARCH_INTEGRATOR_AP
-	select CPU_ARM922T
-
-config INTEGRATOR_CM926EJS
-	bool "Integrator/CM926EJ-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-
-config INTEGRATOR_CM10200E_REV0
-	bool "Integrator/CM10200E rev.0 core module"
-	depends on ARCH_INTEGRATOR_AP && n
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1020
-
-config INTEGRATOR_CM10200E
-	bool "Integrator/CM10200E core module"
-	depends on ARCH_INTEGRATOR_AP && n
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1020E
-
-config INTEGRATOR_CM10220E
-	bool "Integrator/CM10220E core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1022
-
-config INTEGRATOR_CM1026EJS
-	bool "Integrator/CM1026EJ-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM1026
-
-config INTEGRATOR_CM1136JFS
-	bool "Integrator/CM1136JF-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-
-config ARCH_INTEGRATOR_CP
-	bool "Support Integrator/CP platform"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
-	select ARM_TIMER_SP804
-	select SERIAL_AMBA_PL011 if TTY
-	select SERIAL_AMBA_PL011_CONSOLE if TTY
-	select SOC_BUS
-	help
-	  Include support for the ARM(R) Integrator CP platform.
-
-config INTEGRATOR_CT926
-	bool "Integrator/CT926 (ARM926EJ-S) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-
-config INTEGRATOR_CTB36
-	bool "Integrator/CTB36 (ARM1136JF-S) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V6
-	select CPU_V6
-
-config ARCH_CINTEGRATOR
-	depends on ARCH_INTEGRATOR_CP
-	def_bool y
-
-endif

arch/arm/mach-integrator/Makefile

-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y					:= core.o
-obj-$(CONFIG_ARCH_INTEGRATOR_AP)	+= integrator_ap.o
-obj-$(CONFIG_ARCH_INTEGRATOR_CP)	+= integrator_cp.o

arch/arm/mach-iop32x/Kconfig

 # SPDX-License-Identifier: GPL-2.0
-if ARCH_IOP32X
-
-menu "IOP32x Implementation Options"
+menuconfig ARCH_IOP32X
+	bool "IOP32x-based platforms"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_XSCALE
+	select GPIO_IOP
+	select GPIOLIB
+	select FORCE_PCI
+	help
+	  Support for Intel's 80219 and IOP32X (XScale) family of
+	  processors.
 
-comment "IOP32x Platform Types"
+if ARCH_IOP32X
 
 config MACH_EP80219
 	bool
@@ -42,6 +50,4 @@ config MACH_EM7210
 	  board. Say also Y here if you have a SS4000e Baxter Creek NAS
 	  appliance."
 
-endmenu
-
 endif

arch/arm/mach-iop32x/em7210.c

@@ -223,6 +223,7 @@ static void __init em7210_init_machine(void)
 
 MACHINE_START(EM7210, "Lanner EM7210")
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= em7210_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= em7210_timer_init,

arch/arm/mach-iop32x/glantank.c

@@ -205,6 +205,7 @@ static void __init glantank_init_machine(void)
 MACHINE_START(GLANTANK, "GLAN Tank")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= glantank_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= glantank_timer_init,

arch/arm/mach-iop32x/include/mach/irqs.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-iop32x/include/mach/irqs.h
- *
- * Author:	Rory Bolt <rorybolt@pacbell.net>
- * Copyright:	(C) 2002 Rory Bolt
- */
-
-#ifndef __IRQS_H
-#define __IRQS_H
-
-#define NR_IRQS			33
-
-#endif

arch/arm/mach-iop32x/include/mach/uncompress.h

-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-iop32x/include/mach/uncompress.h
- */
-
-#include <asm/types.h>
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define uart_base ((volatile u8 *)0xfe800000)
-
-#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
-
-static inline void putc(char c)
-{
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-	uart_base[UART_TX] = c;
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup() do { } while (0)

arch/arm/mach-iop32x/iq31244.c

@@ -324,6 +324,7 @@ MACHINE_END
 MACHINE_START(EP80219, "Intel EP80219")
 	/* Maintainer: Intel Corp. */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= iq31244_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= iq31244_timer_init,

arch/arm/mach-iop32x/iq80321.c

@@ -183,6 +183,7 @@ static void __init iq80321_init_machine(void)
 MACHINE_START(IQ80321, "Intel IQ80321")
 	/* Maintainer: Intel Corp. */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= iq80321_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= iq80321_timer_init,

arch/arm/mach-iop32x/irqs.h

@@ -43,4 +43,6 @@
 #define IRQ_IOP32X_XINT3	IOP_IRQ(30)
 #define IRQ_IOP32X_HPI		IOP_IRQ(31)
 
+#define IOP32X_NR_IRQS		(IRQ_IOP32X_HPI + 1)
+
 #endif

arch/arm/mach-iop32x/n2100.c

@@ -358,6 +358,7 @@ static void __init n2100_init_machine(void)
 MACHINE_START(N2100, "Thecus N2100")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= IOP32X_NR_IRQS,
 	.map_io		= n2100_map_io,
 	.init_irq	= iop32x_init_irq,
 	.init_time	= n2100_timer_init,

arch/arm/mach-ixp4xx/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
-if ARCH_IXP4XX
-
-menu "Intel IXP4xx Implementation Options"
-
-comment "IXP4xx Platforms"
-
-config MACH_IXP4XX_OF
-	bool
-	prompt "Device Tree IXP4xx boards"
-	default y
+menuconfig ARCH_IXP4XX
+	bool "IXP4xx-based platforms"
+	depends on ARCH_MULTI_V5
+	depends on CPU_BIG_ENDIAN
 	select ARM_APPENDED_DTB # Old Redboot bootloaders deployed
+	select CPU_XSCALE
+	select GPIO_IXP4XX
+	select GPIOLIB
+	select FORCE_PCI
 	select I2C
 	select I2C_IOP3XX
-	select PCI
+	select IXP4XX_IRQ
+	select IXP4XX_TIMER
+	select USB_EHCI_BIG_ENDIAN_DESC
+	select USB_EHCI_BIG_ENDIAN_MMIO
 	select USE_OF
 	help
-	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
-
-endmenu
-
-endif
+	  Support for Intel's IXP4XX (XScale) family of processors.

arch/arm/mach-ixp4xx/Makefile.boot

-# SPDX-License-Identifier: GPL-2.0-only
-   zreladdr-y	+= 0x00008000
-params_phys-y	:= 0x00000100
-

arch/arm/mach-ixp4xx/include/mach/uncompress.h

-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_UNCOMPRESS_H_
-#define _ARCH_UNCOMPRESS_H_
-
-#include <asm/mach-types.h>
-#include <linux/serial_reg.h>
-
-#define IXP4XX_UART1_BASE_PHYS 0xc8000000
-#define IXP4XX_UART2_BASE_PHYS 0xc8001000
-
-#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
-
-volatile u32* uart_base;
-
-static inline void putc(int c)
-{
-	/* Check THRE and TEMT bits before we transmit the character.
-	 */
-	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
-		barrier();
-
-	*uart_base = c;
-}
-
-static void flush(void)
-{
-}
-
-static __inline__ void __arch_decomp_setup(unsigned long arch_id)
-{
-	/*
-	 * Some boards are using UART2 as console
-	 */
-	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-	    machine_is_gateway7001() || machine_is_wg302v2() ||
-	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
-		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
-	else
-		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
-}
-
-/*
- * arch_id is a variable in decompress_kernel()
- */
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
-#endif

arch/arm/mach-keystone/Kconfig

@@ -8,7 +8,6 @@ config ARCH_KEYSTONE
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
-	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ZONE_DMA if ARM_LPAE
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM

arch/arm/mach-lpc32xx/Kconfig

@@ -3,6 +3,7 @@
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select ARM_AMBA
 	select CLKSRC_LPC32XX
 	select CPU_ARM926T

arch/arm/mach-mmp/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MMP
 	bool "Marvell PXA168/910/MMP2/MMP3"
-	depends on ARCH_MULTI_V5 || ARCH_MULTI_V7
+	depends on (CPU_LITTLE_ENDIAN && ARCH_MULTI_V5) || ARCH_MULTI_V7
 	select GPIO_PXA
 	select GPIOLIB
 	select PINCTRL

arch/arm/mach-moxart/Kconfig

@@ -2,6 +2,7 @@
 menuconfig ARCH_MOXART
 	bool "MOXA ART SoC"
 	depends on ARCH_MULTI_V4
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
 	select FARADAY_FTINTC010

arch/arm/mach-mv78xx0/Kconfig

@@ -2,6 +2,7 @@
 menuconfig ARCH_MV78XX0
 	bool "Marvell MV78xx0"
 	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS

arch/arm/mach-mvebu/Kconfig

 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_MVEBU
 	bool "Marvell Engineering Business Unit (MVEBU) SoCs"
-	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
-	select ARCH_SUPPORTS_BIG_ENDIAN
+	depends on ARCH_MULTI_V7 || (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN)
 	select CLKSRC_MMIO
 	select PINCTRL
 	select PLAT_ORION