Commit ed618aff authored by Ben Dooks's avatar Ben Dooks

ARM: S3C64XX: Move IRQ support into mach-s3c64xx

Move IRQ support to mach-s3c64xx as it is unlikely to be re-used outside
this machine.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 3501c9ae
......@@ -15,10 +15,17 @@ obj- :=
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
obj-y += irq.o
obj-y += irq-eint.o
# setup support
obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
# PM
obj-$(CONFIG_PM) += irq-pm.o
# Machine support
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
......
......@@ -13,6 +13,6 @@
*/
#include <mach/map.h>
#include <plat/irqs.h>
#include <mach/irqs.h>
#include <asm/entry-macro-vic2.S>
/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h
/* linux/arch/arm/mach-s3c64xx/include/mach/irqs.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C6400 - IRQ definitions
* S3C64XX - IRQ support
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H __FILE__
#ifndef __ASM_MACH_S3C64XX_IRQS_H
#define __ASM_MACH_S3C64XX_IRQS_H __FILE__
#include <plat/irqs.h>
/* we keep the first set of CPU IRQs out of the range of
* the ISA space, so that the PC104 has them to itself
* and we don't end up having to do horrible things to the
* standard ISA drivers....
*
* note, since we're using the VICs, our start must be a
* mulitple of 32 to allow the common code to work
*/
#define S3C_IRQ_OFFSET (32)
#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
#define IRQ_VIC0_BASE S3C_IRQ(0)
#define IRQ_VIC1_BASE S3C_IRQ(32)
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
* are not in the same order as the S3C24XX series! */
#define IRQ_S3CUART_BASE0 (16)
#define IRQ_S3CUART_BASE1 (20)
#define IRQ_S3CUART_BASE2 (24)
#define IRQ_S3CUART_BASE3 (28)
#define UART_IRQ_RXD (0)
#define UART_IRQ_ERR (1)
#define UART_IRQ_TXD (2)
#define UART_IRQ_MODEM (3)
#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
/* VIC based IRQs */
#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
/* VIC0 */
#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0)
#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1)
#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2)
#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8)
#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8)
#define IRQ_POST0 S3C64XX_IRQ_VIC0(9)
#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10)
#define IRQ_2D S3C64XX_IRQ_VIC0(11)
#define IRQ_TVENC S3C64XX_IRQ_VIC0(12)
#define IRQ_SCALER S3C64XX_IRQ_VIC0(13)
#define IRQ_BATF S3C64XX_IRQ_VIC0(14)
#define IRQ_JPEG S3C64XX_IRQ_VIC0(15)
#define IRQ_MFC S3C64XX_IRQ_VIC0(16)
#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17)
#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18)
#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19)
#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20)
#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21)
#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22)
#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23)
#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24)
#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25)
#define IRQ_WDT S3C64XX_IRQ_VIC0(26)
#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27)
#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28)
#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29)
#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30)
#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31)
/* VIC1 */
#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0)
#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1)
#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2)
#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3)
#define IRQ_AC97 S3C64XX_IRQ_VIC1(4)
#define IRQ_UART0 S3C64XX_IRQ_VIC1(5)
#define IRQ_UART1 S3C64XX_IRQ_VIC1(6)
#define IRQ_UART2 S3C64XX_IRQ_VIC1(7)
#define IRQ_UART3 S3C64XX_IRQ_VIC1(8)
#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9)
#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10)
#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11)
#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
#define IRQ_HSItx S3C64XX_IRQ_VIC1(19)
#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20)
#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21)
#define IRQ_MSM S3C64XX_IRQ_VIC1(22)
#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23)
#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24)
#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25)
#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
#define IRQ_OTG S3C64XX_IRQ_VIC1(26)
#define IRQ_IRDA S3C64XX_IRQ_VIC1(27)
#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28)
#define IRQ_SEC S3C64XX_IRQ_VIC1(29)
#define IRQ_PENDN S3C64XX_IRQ_VIC1(30)
#define IRQ_TC IRQ_PENDN
#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x))
#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0)
#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1)
#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2)
#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3)
#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4)
/* compatibility for device defines */
#define IRQ_IIC1 IRQ_S3C6410_IIC1
/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
* we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
* which we place after the pair of VICs. */
#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5)
#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
#define IRQ_EINT(x) S3C_EINT(x)
#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
* that they are sourced from the GPIO pins but with a different scheme for
* priority and source indication.
*
* The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
* interrupts, but for historical reasons they are kept apart from these
* next interrupts.
*
* Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
* machine specific support files.
*/
#define IRQ_EINT_GROUP1_NR (15)
#define IRQ_EINT_GROUP2_NR (8)
#define IRQ_EINT_GROUP3_NR (5)
#define IRQ_EINT_GROUP4_NR (14)
#define IRQ_EINT_GROUP5_NR (7)
#define IRQ_EINT_GROUP6_NR (10)
#define IRQ_EINT_GROUP7_NR (16)
#define IRQ_EINT_GROUP8_NR (15)
#define IRQ_EINT_GROUP9_NR (9)
#define IRQ_EINT_GROUP_BASE S3C_EINT(28)
#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00)
#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
/* Define a group of interrupts for board-specific use (eg, for MFD
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
#ifdef CONFIG_SMDK6410_WM1190_EV1
#define IRQ_BOARD_NR 64
#else
#define IRQ_BOARD_NR 16
#endif
#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_BOARD_END + 1)
#endif /* __ASM_MACH_S3C64XX_IRQS_H */
#endif /* __ASM_ARCH_IRQ_H */
......@@ -15,8 +15,6 @@ obj- :=
obj-y += dev-uart.o
obj-y += dev-rtc.o
obj-y += cpu.o
obj-y += irq.o
obj-y += irq-eint.o
obj-y += clock.o
obj-y += gpiolib.o
......@@ -30,7 +28,6 @@ obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_PM) += irq-pm.o
# DMA support
......
/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* S3C64XX - Common IRQ support
*/
#ifndef __ASM_PLAT_S3C64XX_IRQS_H
#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__
/* we keep the first set of CPU IRQs out of the range of
* the ISA space, so that the PC104 has them to itself
* and we don't end up having to do horrible things to the
* standard ISA drivers....
*
* note, since we're using the VICs, our start must be a
* mulitple of 32 to allow the common code to work
*/
#define S3C_IRQ_OFFSET (32)
#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET)
#define IRQ_VIC0_BASE S3C_IRQ(0)
#define IRQ_VIC1_BASE S3C_IRQ(32)
/* UART interrupts, each UART has 4 intterupts per channel so
* use the space between the ISA and S3C main interrupts. Note, these
* are not in the same order as the S3C24XX series! */
#define IRQ_S3CUART_BASE0 (16)
#define IRQ_S3CUART_BASE1 (20)
#define IRQ_S3CUART_BASE2 (24)
#define IRQ_S3CUART_BASE3 (28)
#define UART_IRQ_RXD (0)
#define UART_IRQ_ERR (1)
#define UART_IRQ_TXD (2)
#define UART_IRQ_MODEM (3)
#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR)
#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD)
#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD)
#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR)
/* VIC based IRQs */
#define S3C64XX_IRQ_VIC0(x) (IRQ_VIC0_BASE + (x))
#define S3C64XX_IRQ_VIC1(x) (IRQ_VIC1_BASE + (x))
/* VIC0 */
#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0)
#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1)
#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2)
#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3)
#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4)
#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5)
#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5)
#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6)
#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6)
#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7)
#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8)
#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8)
#define IRQ_POST0 S3C64XX_IRQ_VIC0(9)
#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10)
#define IRQ_2D S3C64XX_IRQ_VIC0(11)
#define IRQ_TVENC S3C64XX_IRQ_VIC0(12)
#define IRQ_SCALER S3C64XX_IRQ_VIC0(13)
#define IRQ_BATF S3C64XX_IRQ_VIC0(14)
#define IRQ_JPEG S3C64XX_IRQ_VIC0(15)
#define IRQ_MFC S3C64XX_IRQ_VIC0(16)
#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17)
#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18)
#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19)
#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20)
#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21)
#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22)
#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23)
#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24)
#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25)
#define IRQ_WDT S3C64XX_IRQ_VIC0(26)
#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27)
#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28)
#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29)
#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30)
#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31)
/* VIC1 */
#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0)
#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1)
#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2)
#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3)
#define IRQ_AC97 S3C64XX_IRQ_VIC1(4)
#define IRQ_UART0 S3C64XX_IRQ_VIC1(5)
#define IRQ_UART1 S3C64XX_IRQ_VIC1(6)
#define IRQ_UART2 S3C64XX_IRQ_VIC1(7)
#define IRQ_UART3 S3C64XX_IRQ_VIC1(8)
#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9)
#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10)
#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11)
#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12)
#define IRQ_NFC S3C64XX_IRQ_VIC1(13)
#define IRQ_CFCON S3C64XX_IRQ_VIC1(14)
#define IRQ_USBH S3C64XX_IRQ_VIC1(15)
#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16)
#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17)
#define IRQ_IIC S3C64XX_IRQ_VIC1(18)
#define IRQ_HSItx S3C64XX_IRQ_VIC1(19)
#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20)
#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21)
#define IRQ_MSM S3C64XX_IRQ_VIC1(22)
#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23)
#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24)
#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25)
#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */
#define IRQ_OTG S3C64XX_IRQ_VIC1(26)
#define IRQ_IRDA S3C64XX_IRQ_VIC1(27)
#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28)
#define IRQ_SEC S3C64XX_IRQ_VIC1(29)
#define IRQ_PENDN S3C64XX_IRQ_VIC1(30)
#define IRQ_TC IRQ_PENDN
#define IRQ_ADC S3C64XX_IRQ_VIC1(31)
#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x))
#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0)
#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1)
#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2)
#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3)
#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4)
/* compatibility for device defines */
#define IRQ_IIC1 IRQ_S3C6410_IIC1
/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series
* we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE
* which we place after the pair of VICs. */
#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5)
#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
#define IRQ_EINT(x) S3C_EINT(x)
#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
* that they are sourced from the GPIO pins but with a different scheme for
* priority and source indication.
*
* The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO
* interrupts, but for historical reasons they are kept apart from these
* next interrupts.
*
* Use IRQ_EINT_GROUP(group, offset) to get the number for use in the
* machine specific support files.
*/
#define IRQ_EINT_GROUP1_NR (15)
#define IRQ_EINT_GROUP2_NR (8)
#define IRQ_EINT_GROUP3_NR (5)
#define IRQ_EINT_GROUP4_NR (14)
#define IRQ_EINT_GROUP5_NR (7)
#define IRQ_EINT_GROUP6_NR (10)
#define IRQ_EINT_GROUP7_NR (16)
#define IRQ_EINT_GROUP8_NR (15)
#define IRQ_EINT_GROUP9_NR (9)
#define IRQ_EINT_GROUP_BASE S3C_EINT(28)
#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00)
#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR)
#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR)
#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR)
#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR)
#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR)
#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR)
#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR)
#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR)
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
/* Define a group of interrupts for board-specific use (eg, for MFD
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
#ifdef CONFIG_SMDK6410_WM1190_EV1
#define IRQ_BOARD_NR 64
#else
#define IRQ_BOARD_NR 16
#endif
#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_BOARD_END + 1)
#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment