Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

MAINTAINERS

@@ -1800,6 +1800,9 @@ F:	include/linux/cfag12864b.h
 CFG80211 and NL80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	include/linux/nl80211.h
 F:	include/net/cfg80211.h
@@ -4340,7 +4343,8 @@ MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
 F:	include/net/mac80211.h
@@ -4351,7 +4355,8 @@ M:	Stefano Brivio <stefano.brivio@polimi.it>
 M:	Mattias Nissler <mattias.nissler@gmx.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	net/mac80211/rc80211_pid*
 
@@ -5695,6 +5700,9 @@ F:	include/linux/remoteproc.h
 RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/rfkill.txt
 F:	net/rfkill/

drivers/bcma/driver_pci.c

@@ -232,17 +232,19 @@ void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc)
 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
 			  bool enable)
 {
-	struct pci_dev *pdev = pc->core->bus->host_pci;
+	struct pci_dev *pdev;
 	u32 coremask, tmp;
 	int err = 0;
 
-	if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+	if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
 		/* This bcma device is not on a PCI host-bus. So the IRQs are
 		 * not routed through the PCI core.
 		 * So we must not enable routing through the PCI core. */
 		goto out;
 	}
 
+	pdev = pc->core->bus->host_pci;
+
 	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
 	if (err)
 		goto out;

drivers/net/wireless/b43/b43.h

@@ -877,6 +877,10 @@ struct b43_wl {
 	 * from the mac80211 subsystem. */
 	u16 mac80211_initially_registered_queues;
 
+	/* Set this if we call ieee80211_register_hw() and check if we call
+	 * ieee80211_unregister_hw(). */
+	bool hw_registred;
+
 	/* We can only have one operating interface (802.11 core)
 	 * at a time. General information about this interface follows.
 	 */

drivers/net/wireless/b43/main.c

@@ -2437,6 +2437,7 @@ static void b43_request_firmware(struct work_struct *work)
 	err = ieee80211_register_hw(wl->hw);
 	if (err)
 		goto err_one_core_detach;
+	wl->hw_registred = true;
 	b43_leds_register(wl->current_dev);
 	goto out;
 
@@ -5299,6 +5300,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 
 	hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
 	wl->mac80211_initially_registered_queues = hw->queues;
+	wl->hw_registred = false;
 	hw->max_rates = 2;
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))
@@ -5370,12 +5372,15 @@ static void b43_bcma_remove(struct bcma_device *core)
 	 * as the ieee80211 unreg will destroy the workqueue. */
 	cancel_work_sync(&wldev->restart_work);
 
-	/* Restore the queues count before unregistering, because firmware detect
-	 * might have modified it. Restoring is important, so the networking
-	 * stack can properly free resources. */
-	wl->hw->queues = wl->mac80211_initially_registered_queues;
-	b43_leds_stop(wldev);
-	ieee80211_unregister_hw(wl->hw);
+	B43_WARN_ON(!wl);
+	if (wl->current_dev == wldev && wl->hw_registred) {
+		/* Restore the queues count before unregistering, because firmware detect
+		 * might have modified it. Restoring is important, so the networking
+		 * stack can properly free resources. */
+		wl->hw->queues = wl->mac80211_initially_registered_queues;
+		b43_leds_stop(wldev);
+		ieee80211_unregister_hw(wl->hw);
+	}
 
 	b43_one_core_detach(wldev->dev);
 
@@ -5446,7 +5451,7 @@ static void b43_ssb_remove(struct ssb_device *sdev)
 	cancel_work_sync(&wldev->restart_work);
 
 	B43_WARN_ON(!wl);
-	if (wl->current_dev == wldev) {
+	if (wl->current_dev == wldev && wl->hw_registred) {
 		/* Restore the queues count before unregistering, because firmware detect
 		 * might have modified it. Restoring is important, so the networking
 		 * stack can properly free resources. */

drivers/net/wireless/ipw2x00/ipw2100.c

@@ -1903,14 +1903,6 @@ static void ipw2100_down(struct ipw2100_priv *priv)
 	netif_stop_queue(priv->net_dev);
 }
 
-/* Called by register_netdev() */
-static int ipw2100_net_init(struct net_device *dev)
-{
-	struct ipw2100_priv *priv = libipw_priv(dev);
-
-	return ipw2100_up(priv, 1);
-}
-
 static int ipw2100_wdev_init(struct net_device *dev)
 {
 	struct ipw2100_priv *priv = libipw_priv(dev);
@@ -6087,7 +6079,6 @@ static const struct net_device_ops ipw2100_netdev_ops = {
 	.ndo_stop		= ipw2100_close,
 	.ndo_start_xmit		= libipw_xmit,
 	.ndo_change_mtu		= libipw_change_mtu,
-	.ndo_init		= ipw2100_net_init,
 	.ndo_tx_timeout		= ipw2100_tx_timeout,
 	.ndo_set_mac_address	= ipw2100_set_address,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -6329,6 +6320,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 	printk(KERN_INFO DRV_NAME
 	       ": Detected Intel PRO/Wireless 2100 Network Connection\n");
 
+	err = ipw2100_up(priv, 1);
+	if (err)
+		goto fail;
+
 	err = ipw2100_wdev_init(dev);
 	if (err)
 		goto fail;
@@ -6338,12 +6333,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 	 * network device we would call ipw2100_up.  This introduced a race
 	 * condition with newer hotplug configurations (network was coming
 	 * up and making calls before the device was initialized).
-	 *
-	 * If we called ipw2100_up before we registered the device, then the
-	 * device name wasn't registered.  So, we instead use the net_dev->init
-	 * member to call a function that then just turns and calls ipw2100_up.
-	 * net_dev->init is called after name allocation but before the
-	 * notifier chain is called */
+	 */
 	err = register_netdev(dev);
 	if (err) {
 		printk(KERN_WARNING DRV_NAME

drivers/net/wireless/iwlwifi/iwl-6000.c

@@ -35,17 +35,20 @@
 #define IWL6000_UCODE_API_MAX 6
 #define IWL6050_UCODE_API_MAX 5
 #define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
 
 /* Oldest version we won't warn about */
 #define IWL6000_UCODE_API_OK 4
 #define IWL6000G2_UCODE_API_OK 5
 #define IWL6050_UCODE_API_OK 5
 #define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
 
 /* Lowest firmware API version supported */
 #define IWL6000_UCODE_API_MIN 4
 #define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
 
 /* EEPROM versions */
 #define EEPROM_6000_TX_POWER_VERSION	(4)
@@ -227,9 +230,25 @@ const struct iwl_cfg iwl6030_2bg_cfg = {
 	IWL_DEVICE_6030,
 };
 
+#define IWL_DEVICE_6035						\
+	.fw_name_pre = IWL6030_FW_PRE,				\
+	.ucode_api_max = IWL6035_UCODE_API_MAX,			\
+	.ucode_api_ok = IWL6035_UCODE_API_OK,			\
+	.ucode_api_min = IWL6035_UCODE_API_MIN,			\
+	.device_family = IWL_DEVICE_FAMILY_6030,		\
+	.max_inst_size = IWL60_RTC_INST_SIZE,			\
+	.max_data_size = IWL60_RTC_DATA_SIZE,			\
+	.eeprom_ver = EEPROM_6030_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION,	\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true
+
 const struct iwl_cfg iwl6035_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
-	IWL_DEVICE_6030,
+	IWL_DEVICE_6035,
 	.ht_params = &iwl6000_ht_params,
 };
 

drivers/net/wireless/iwlwifi/iwl-agn-sta.c

@@ -1267,7 +1267,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 		key_flags |= STA_KEY_MULTICAST_MSK;
 
 	sta_cmd.key.key_flags = key_flags;
-	sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
+	sta_cmd.key.key_offset = keyconf->hw_key_idx;
 	sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
 

drivers/net/wireless/iwlwifi/iwl-prph.h

@@ -224,6 +224,7 @@
 #define SCD_TXFACT		(SCD_BASE + 0x10)
 #define SCD_ACTIVE		(SCD_BASE + 0x14)
 #define SCD_QUEUECHAIN_SEL	(SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN		(SCD_BASE + 0x244)
 #define SCD_AGGR_SEL		(SCD_BASE + 0x248)
 #define SCD_INTERRUPT_MASK	(SCD_BASE + 0x108)
 

drivers/net/wireless/iwlwifi/iwl-trans-pcie.c

@@ -1058,6 +1058,11 @@ static void iwl_tx_start(struct iwl_trans *trans)
 	iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
 		       trans_pcie->scd_bc_tbls.dma >> 10);
 
+	/* The chain extension of the SCD doesn't work well. This feature is
+	 * enabled by default by the HW, so we need to disable it manually.
+	 */
+	iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
+
 	/* Enable DMA channel */
 	for (chan = 0; chan < FH_TCSR_CHNL_NUM ; chan++)
 		iwl_write_direct32(trans, FH_TCSR_CHNL_TX_CONFIG_REG(chan),

drivers/net/wireless/mac80211_hwsim.c

@@ -1555,6 +1555,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
 			hdr = (struct ieee80211_hdr *) skb->data;
 			mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2);
 		}
+		txi->flags |= IEEE80211_TX_STAT_ACK;
 	}
 	ieee80211_tx_status_irqsafe(data2->hw, skb);
 	return 0;

drivers/net/wireless/rtl818x/rtl8187/leds.c

@@ -117,7 +117,7 @@ static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
 			radio_on = true;
 		} else if (radio_on) {
 			radio_on = false;
-			cancel_delayed_work_sync(&priv->led_on);
+			cancel_delayed_work(&priv->led_on);
 			ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
 		}
 	} else if (radio_on) {

net/mac80211/mlme.c

@@ -3124,7 +3124,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
 	}
 
 	local->oper_channel = cbss->channel;
-	ieee80211_hw_config(local, 0);
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
 
 	if (!have_sta) {
 		u32 rates = 0, basic_rates = 0;

net/nfc/llcp/sock.c

@@ -292,6 +292,9 @@ static int llcp_sock_getname(struct socket *sock, struct sockaddr *addr,
 
 	pr_debug("%p\n", sk);
 
+	if (llcp_sock == NULL)
+		return -EBADFD;
+
 	addr->sa_family = AF_NFC;
 	*len = sizeof(struct sockaddr_nfc_llcp);