fsi: master-gpio: Rename and adjust send delay

What the driver called "FSI_GPIO_PRIME_SLAVE_CLOCKS" is what
the FSI spec calls tSendDelay and should be 16 clocks by
default.
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: default avatarJoel Stanley <joel@jms.id.au>
parent a2e7da86
...@@ -18,6 +18,7 @@ ...@@ -18,6 +18,7 @@
#define FSI_GPIO_STD_DLY 1 /* Standard pin delay in nS */ #define FSI_GPIO_STD_DLY 1 /* Standard pin delay in nS */
#define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */ #define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */
#define FSI_SEND_DELAY_CLOCKS 16 /* Number clocks for send delay */
#define FSI_PRE_BREAK_CLOCKS 50 /* Number clocks to prep for break */ #define FSI_PRE_BREAK_CLOCKS 50 /* Number clocks to prep for break */
#define FSI_BREAK_CLOCKS 256 /* Number of clocks to issue break */ #define FSI_BREAK_CLOCKS 256 /* Number of clocks to issue break */
#define FSI_POST_BREAK_CLOCKS 16000 /* Number clocks to set up cfam */ #define FSI_POST_BREAK_CLOCKS 16000 /* Number clocks to set up cfam */
...@@ -48,7 +49,6 @@ ...@@ -48,7 +49,6 @@
#define FSI_GPIO_CRC_SIZE 4 #define FSI_GPIO_CRC_SIZE 4
#define FSI_GPIO_MSG_ID_SIZE 2 #define FSI_GPIO_MSG_ID_SIZE 2
#define FSI_GPIO_MSG_RESPID_SIZE 2 #define FSI_GPIO_MSG_RESPID_SIZE 2
#define FSI_GPIO_PRIME_SLAVE_CLOCKS 20
#define LAST_ADDR_INVALID 0x1 #define LAST_ADDR_INVALID 0x1
...@@ -535,9 +535,12 @@ static int poll_for_response(struct fsi_master_gpio *master, ...@@ -535,9 +535,12 @@ static int poll_for_response(struct fsi_master_gpio *master,
if (busy_count > 0) if (busy_count > 0)
trace_fsi_master_gpio_poll_response_busy(master, busy_count); trace_fsi_master_gpio_poll_response_busy(master, busy_count);
fail: fail:
/* Clock the slave enough to be ready for next operation */ /*
* tSendDelay clocks, avoids signal reflections when switching
* from receive of response back to send of data.
*/
local_irq_save(flags); local_irq_save(flags);
clock_zeros(master, FSI_GPIO_PRIME_SLAVE_CLOCKS); clock_zeros(master, FSI_SEND_DELAY_CLOCKS);
local_irq_restore(flags); local_irq_restore(flags);
return rc; return rc;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment