ARM: dts: qcom: ipq4019: fix broken NAND controller properties override

After renaming NAND controller node name from "qpic-nand" to
"nand-controller", the board DTS/DTSI also have to be updated:

  Warning (unit_address_vs_reg): /soc/qpic-nand@79b0000: node has a unit name, but no reg or ranges property

Cc: <stable@vger.kernel.org>
Fixes: 9e1e00f1 ("ARM: dts: qcom: Fix node name for NAND controller node")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230420072811.36947-1-krzysztof.kozlowski@linaro.org

arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts

@@ -11,9 +11,9 @@ soc {
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	status = "okay";
+};

arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi

@@ -102,10 +102,10 @@ pci@40000000 {
 			status = "okay";
 			perst-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+};

arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi

@@ -65,11 +65,11 @@ i2c@78b7000 { /* BLSP1 QUP2 */
 		dma-controller@7984000 {
 			status = "okay";
 		};
-
-		qpic-nand@79b0000 {
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
 	};
 };
+
+&nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};