Commit ee5caf0e authored by David S. Miller's avatar David S. Miller Committed by David S. Miller

[SPARC]: Convert clock drivers to of_driver framework.

Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 36a59bd8
......@@ -42,6 +42,7 @@
#include <asm/sun4paddr.h>
#include <asm/page.h>
#include <asm/pcic.h>
#include <asm/of_device.h>
extern unsigned long wall_jiffies;
......@@ -273,83 +274,31 @@ static __inline__ void sun4_clock_probe(void)
#endif
}
/* Probe for the mostek real time clock chip. */
static __inline__ void clock_probe(void)
static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
{
struct linux_prom_registers clk_reg[2];
char model[128];
register int node, cpuunit, bootbus;
struct resource r;
cpuunit = bootbus = 0;
memset(&r, 0, sizeof(r));
/* Determine the correct starting PROM node for the probe. */
node = prom_getchild(prom_root_node);
switch (sparc_cpu_model) {
case sun4c:
break;
case sun4m:
node = prom_getchild(prom_searchsiblings(node, "obio"));
break;
case sun4d:
node = prom_getchild(bootbus = prom_searchsiblings(prom_getchild(cpuunit = prom_searchsiblings(node, "cpu-unit")), "bootbus"));
break;
default:
prom_printf("CLOCK: Unsupported architecture!\n");
prom_halt();
}
struct device_node *dp = op->node;
char *model = of_get_property(dp, "model", NULL);
/* Find the PROM node describing the real time clock. */
sp_clock_typ = MSTK_INVALID;
node = prom_searchsiblings(node,"eeprom");
if (!node) {
prom_printf("CLOCK: No clock found!\n");
prom_halt();
}
if (!model)
return -ENODEV;
/* Get the model name and setup everything up. */
model[0] = '\0';
prom_getstring(node, "model", model, sizeof(model));
if (strcmp(model, "mk48t02") == 0) {
if (!strcmp(model, "mk48t02")) {
sp_clock_typ = MSTK48T02;
if (prom_getproperty(node, "reg", (char *) clk_reg, sizeof(clk_reg)) == -1) {
prom_printf("clock_probe: FAILED!\n");
prom_halt();
}
if (sparc_cpu_model == sun4d)
prom_apply_generic_ranges (bootbus, cpuunit, clk_reg, 1);
else
prom_apply_obio_ranges(clk_reg, 1);
/* Map the clock register io area read-only */
r.flags = clk_reg[0].which_io;
r.start = clk_reg[0].phys_addr;
mstk48t02_regs = sbus_ioremap(&r, 0,
sizeof(struct mostek48t02), "mk48t02");
mstk48t02_regs = of_ioremap(&op->resource[0], 0,
sizeof(struct mostek48t02),
"mk48t02");
mstk48t08_regs = NULL; /* To catch weirdness */
} else if (strcmp(model, "mk48t08") == 0) {
} else if (!strcmp(model, "mk48t08")) {
sp_clock_typ = MSTK48T08;
if(prom_getproperty(node, "reg", (char *) clk_reg,
sizeof(clk_reg)) == -1) {
prom_printf("clock_probe: FAILED!\n");
prom_halt();
}
if (sparc_cpu_model == sun4d)
prom_apply_generic_ranges (bootbus, cpuunit, clk_reg, 1);
else
prom_apply_obio_ranges(clk_reg, 1);
/* Map the clock register io area read-only */
/* XXX r/o attribute is somewhere in r.flags */
r.flags = clk_reg[0].which_io;
r.start = clk_reg[0].phys_addr;
mstk48t08_regs = sbus_ioremap(&r, 0,
sizeof(struct mostek48t08), "mk48t08");
mstk48t08_regs = of_ioremap(&op->resource[0], 0,
sizeof(struct mostek48t08),
"mk48t08");
mstk48t02_regs = &mstk48t08_regs->regs;
} else {
prom_printf("CLOCK: Unknown model name '%s'\n",model);
prom_halt();
}
} else
return -ENODEV;
/* Report a low battery voltage condition. */
if (has_low_battery())
......@@ -358,6 +307,28 @@ static __inline__ void clock_probe(void)
/* Kick start the clock if it is completely stopped. */
if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
kick_start_clock();
return 0;
}
static struct of_device_id clock_match[] = {
{
.name = "eeprom",
},
{},
};
static struct of_platform_driver clock_driver = {
.name = "clock",
.match_table = clock_match,
.probe = clock_probe,
};
/* Probe for the mostek real time clock chip. */
static void clock_init(void)
{
of_register_driver(&clock_driver, &of_bus_type);
}
void __init sbus_time_init(void)
......@@ -376,7 +347,7 @@ void __init sbus_time_init(void)
if (ARCH_SUN4)
sun4_clock_probe();
else
clock_probe();
clock_init();
sparc_init_timers(timer_interrupt);
......
......@@ -307,7 +307,6 @@ static void __init pci_scan_each_controller_bus(void)
p->scan_bus(p);
}
extern void clock_probe(void);
extern void power_init(void);
static int __init pcibios_init(void)
......@@ -320,7 +319,6 @@ static int __init pcibios_init(void)
isa_init();
ebus_init();
clock_probe();
power_init();
return 0;
......
......@@ -1267,8 +1267,6 @@ int __init sbus_arch_preinit(void)
void __init sbus_arch_postinit(void)
{
extern void firetruck_init(void);
extern void clock_probe(void);
firetruck_init();
clock_probe();
}
......@@ -770,237 +770,99 @@ static int __init clock_model_matches(char *model)
return 1;
}
static void __init __clock_assign_common(void __iomem *addr, char *model)
static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match)
{
if (model[5] == '0' && model[6] == '2') {
mstk48t02_regs = addr;
} else if(model[5] == '0' && model[6] == '8') {
mstk48t08_regs = addr;
mstk48t02_regs = mstk48t08_regs + MOSTEK_48T08_48T02;
} else {
mstk48t59_regs = addr;
mstk48t02_regs = mstk48t59_regs + MOSTEK_48T59_48T02;
}
}
static void __init clock_assign_clk_reg(struct linux_prom_registers *clk_reg,
char *model)
{
unsigned long addr;
struct device_node *dp = op->node;
char *model = of_get_property(dp, "model", NULL);
unsigned long size, flags;
void __iomem *regs;
addr = ((unsigned long) clk_reg[0].phys_addr |
(((unsigned long) clk_reg[0].which_io) << 32UL));
__clock_assign_common((void __iomem *) addr, model);
}
static int __init clock_probe_central(void)
{
struct linux_prom_registers clk_reg[2], *pr;
struct device_node *dp;
char *model;
if (!central_bus)
return 0;
/* Get Central FHC's prom node. */
dp = central_bus->child->prom_node;
/* Then get the first child device below it. */
dp = dp->child;
while (dp) {
model = of_get_property(dp, "model", NULL);
if (!model || !clock_model_matches(model))
goto next_sibling;
pr = of_get_property(dp, "reg", NULL);
memcpy(clk_reg, pr, sizeof(clk_reg));
apply_fhc_ranges(central_bus->child, clk_reg, 1);
apply_central_ranges(central_bus, clk_reg, 1);
clock_assign_clk_reg(clk_reg, model);
return 1;
next_sibling:
dp = dp->sibling;
}
if (!model || !clock_model_matches(model))
return -ENODEV;
return 0;
}
size = (op->resource[0].end - op->resource[0].start) + 1;
regs = of_ioremap(&op->resource[0], 0, size, "clock");
if (!regs)
return -ENOMEM;
#ifdef CONFIG_PCI
static void __init clock_isa_ebus_assign_regs(struct resource *res, char *model)
{
if (!strcmp(model, "ds1287") ||
!strcmp(model, "m5819") ||
!strcmp(model, "m5819p") ||
!strcmp(model, "m5823")) {
ds1287_regs = res->start;
ds1287_regs = (unsigned long) regs;
} else if (model[5] == '0' && model[6] == '2') {
mstk48t02_regs = regs;
} else if(model[5] == '0' && model[6] == '8') {
mstk48t08_regs = regs;
mstk48t02_regs = mstk48t08_regs + MOSTEK_48T08_48T02;
} else {
mstk48t59_regs = (void __iomem *) res->start;
mstk48t59_regs = regs;
mstk48t02_regs = mstk48t59_regs + MOSTEK_48T59_48T02;
}
}
static int __init clock_probe_one_ebus_dev(struct linux_ebus_device *edev)
{
struct device_node *dp = edev->prom_node;
char *model;
model = of_get_property(dp, "model", NULL);
if (!clock_model_matches(model))
return 0;
clock_isa_ebus_assign_regs(&edev->resource[0], model);
printk(KERN_INFO "%s: Clock regs at %p\n", dp->full_name, regs);
return 1;
}
static int __init clock_probe_ebus(void)
{
struct linux_ebus *ebus;
local_irq_save(flags);
for_each_ebus(ebus) {
struct linux_ebus_device *edev;
if (mstk48t02_regs != NULL) {
/* Report a low battery voltage condition. */
if (has_low_battery())
prom_printf("NVRAM: Low battery voltage!\n");
for_each_ebusdev(edev, ebus) {
if (clock_probe_one_ebus_dev(edev))
return 1;
}
/* Kick start the clock if it is completely stopped. */
if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
kick_start_clock();
}
return 0;
}
static int __init clock_probe_one_isa_dev(struct sparc_isa_device *idev)
{
struct device_node *dp = idev->prom_node;
char *model;
model = of_get_property(dp, "model", NULL);
if (!clock_model_matches(model))
return 0;
clock_isa_ebus_assign_regs(&idev->resource, model);
return 1;
}
static int __init clock_probe_isa(void)
{
struct sparc_isa_bridge *isa_br;
for_each_isa(isa_br) {
struct sparc_isa_device *isa_dev;
for_each_isadev(isa_dev, isa_br) {
if (clock_probe_one_isa_dev(isa_dev))
return 1;
}
}
set_system_time();
local_irq_restore(flags);
return 0;
}
#endif /* CONFIG_PCI */
#ifdef CONFIG_SBUS
static int __init clock_probe_one_sbus_dev(struct sbus_bus *sbus, struct sbus_dev *sdev)
{
struct resource *res;
char model[64];
void __iomem *addr;
prom_getstring(sdev->prom_node, "model", model, sizeof(model));
if (!clock_model_matches(model))
return 0;
res = &sdev->resource[0];
addr = sbus_ioremap(res, 0, 0x800UL, "eeprom");
__clock_assign_common(addr, model);
return 1;
}
static int __init clock_probe_sbus(void)
{
struct sbus_bus *sbus;
for_each_sbus(sbus) {
struct sbus_dev *sdev;
for_each_sbusdev(sdev, sbus) {
if (clock_probe_one_sbus_dev(sbus, sdev))
return 1;
}
}
static struct of_device_id clock_match[] = {
{
.name = "eeprom",
},
{
.name = "rtc",
},
{},
};
return 0;
}
#endif
static struct of_platform_driver clock_driver = {
.name = "clock",
.match_table = clock_match,
.probe = clock_probe,
};
void __init clock_probe(void)
static int __init clock_init(void)
{
static int invoked;
unsigned long flags;
if (invoked)
return;
invoked = 1;
if (this_is_starfire) {
xtime.tv_sec = starfire_get_time();
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
return;
return 0;
}
if (tlb_type == hypervisor) {
xtime.tv_sec = hypervisor_get_time();
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
return;
}
/* Check FHC Central then EBUSs then ISA bridges then SBUSs.
* That way we handle the presence of multiple properly.
*
* As a special case, machines with Central must provide the
* timer chip there.
*/
if (!clock_probe_central() &&
#ifdef CONFIG_PCI
!clock_probe_ebus() &&
!clock_probe_isa() &&
#endif
#ifdef CONFIG_SBUS
!clock_probe_sbus()
#endif
) {
printk(KERN_WARNING "No clock chip found.\n");
return;
}
local_irq_save(flags);
if (mstk48t02_regs != NULL) {
/* Report a low battery voltage condition. */
if (has_low_battery())
prom_printf("NVRAM: Low battery voltage!\n");
/* Kick start the clock if it is completely stopped. */
if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP)
kick_start_clock();
return 0;
}
set_system_time();
local_irq_restore(flags);
return of_register_driver(&clock_driver, &of_bus_type);
}
/* Must be after subsys_initcall() so that busses are probed. Must
* be before device_initcall() because things like the RTC driver
* need to see the clock registers.
*/
fs_initcall(clock_init);
/* This is gets the master TICK_INT timer going. */
static unsigned long sparc64_init_timers(void)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment