mfd: Unify abx500 headers in mfd/abx500

This moves all the header files related to the abx500 family into
a common include directory below mfd. From now on we place any
subchip header in that directory. Headers previously in e.g.
<linux/mfd/ab8500/gpio.h> get prefixed and are now e.g.
<linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface
remains in <linux/mfd/abx500.h>.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

arch/arm/mach-ux500/board-mop500.c

@@ -19,11 +19,11 @@
 #include <linux/amba/pl022.h>
 #include <linux/amba/serial.h>
 #include <linux/spi/spi.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
-#include <linux/mfd/ab8500/gpio.h>
+#include <linux/mfd/abx500/ab8500-gpio.h>
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
 #include <linux/smsc911x.h>

arch/arm/mach-ux500/board-u5500.c

@@ -10,7 +10,7 @@
 #include <linux/amba/bus.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
-#include <linux/mfd/ab5500/ab5500.h>
+#include <linux/mfd/abx500/ab5500.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>

arch/arm/mach-ux500/include/mach/irqs-board-mop500.h

@@ -9,7 +9,7 @@
 #define __MACH_IRQS_BOARD_MOP500_H
 
 /* Number of AB8500 irqs is taken from header file */
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 
 #define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
 #define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \

drivers/input/misc/ab8500-ponkey.c

@@ -12,7 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/slab.h>
 
 /**

drivers/mfd/ab5500-core.c

@@ -22,8 +22,8 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/random.h>
-#include <linux/mfd/ab5500/ab5500.h>
 #include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab5500.h>
 #include <linux/list.h>
 #include <linux/bitops.h>
 #include <linux/spinlock.h>

drivers/mfd/ab5500-debugfs.c

@@ -7,8 +7,8 @@
 #include <linux/module.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
-#include <linux/mfd/ab5500/ab5500.h>
 #include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab5500.h>
 #include <linux/uaccess.h>
 
 #include "ab5500-core.h"

drivers/mfd/ab8500-core.c

@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 
 /*

drivers/mfd/ab8500-debugfs.c

@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 
 #include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 
 static u32 debug_bank;
 static u32 debug_address;

drivers/mfd/ab8500-gpadc.c

@@ -18,9 +18,9 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/list.h>
-#include <linux/mfd/ab8500.h>
 #include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500/gpadc.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
 
 /*
  * GPADC register offsets

drivers/mfd/ab8500-i2c.c

@@ -10,7 +10,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/db8500-prcmu.h>
 
 static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)

drivers/mfd/ab8500-sysctrl.c

@@ -7,9 +7,9 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/ab8500.h>
 #include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500/sysctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-sysctrl.h>
 
 static struct device *sysctrl_dev;
 

drivers/misc/ab8500-pwm.c

@@ -8,8 +8,8 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/pwm.h>
-#include <linux/mfd/ab8500.h>
 #include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/module.h>
 
 /*

drivers/regulator/ab8500.c

@@ -16,8 +16,8 @@
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <linux/mfd/ab8500.h>
 #include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/ab8500.h>

drivers/rtc/rtc-ab8500.c

@@ -15,7 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
 #include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 #include <linux/delay.h>
 
 #define AB8500_RTC_SOFF_STAT_REG	0x00

drivers/usb/otg/ab8500-usb.c

@@ -30,7 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/mfd/abx500.h>
-#include <linux/mfd/ab8500.h>
+#include <linux/mfd/abx500/ab8500.h>
 
 #define AB8500_MAIN_WD_CTRL_REG 0x01
 #define AB8500_USB_LINE_STAT_REG 0x80