OMAPDSS: HDMI: Move duplicate code from boardfile

Move duplicate HDMI mux_init code from omap4 and panda board file
to display file.
Signed-off-by: Mythri P K <mythripk@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

arch/arm/mach-omap2/board-4430sdp.c

@@ -595,20 +595,6 @@ static void __init omap_sfh7741prox_init(void)
 			__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
 }
 
-static void sdp4430_hdmi_mux_init(void)
-{
-	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
 static struct gpio sdp4430_hdmi_gpios[] = {
 	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_hpd"   },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH,	"hdmi_gpio_ls_oe" },
@@ -826,9 +812,9 @@ static void omap_4430sdp_display_init(void)
 		pr_err("%s: Could not get display_sel GPIO\n", __func__);
 
 	sdp4430_lcd_init();
-	sdp4430_hdmi_mux_init();
 	sdp4430_picodlp_init();
 	omap_display_init(&sdp4430_dss_data);
+	omap_hdmi_init();
 }
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/board-omap4panda.c

@@ -478,21 +478,6 @@ int __init omap4_panda_dvi_init(void)
 	return r;
 }
 
-
-static void omap4_panda_hdmi_mux_init(void)
-{
-	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
-	omap_mux_init_signal("hdmi_hpd",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_cec",
-			OMAP_PIN_INPUT_PULLUP);
-	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
-	omap_mux_init_signal("hdmi_ddc_scl",
-			OMAP_PIN_INPUT_PULLUP);
-	omap_mux_init_signal("hdmi_ddc_sda",
-			OMAP_PIN_INPUT_PULLUP);
-}
-
 static struct gpio panda_hdmi_gpios[] = {
 	{ HDMI_GPIO_HPD,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd"   },
 	{ HDMI_GPIO_LS_OE,	GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -544,8 +529,8 @@ void omap4_panda_display_init(void)
 	if (r)
 		pr_err("error initializing panda DVI\n");
 
-	omap4_panda_hdmi_mux_init();
 	omap_display_init(&omap4_panda_dss_data);
+	omap_hdmi_init();
 }
 
 static void __init omap4_panda_init(void)

arch/arm/mach-omap2/display.c

@@ -29,6 +29,7 @@
 #include <plat/omap-pm.h>
 #include <plat/common.h>
 
+#include "mux.h"
 #include "control.h"
 #include "display.h"
 
@@ -96,6 +97,20 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
 	{ "dss_hdmi", "omapdss_hdmi", -1 },
 };
 
+static void omap4_hdmi_mux_pads()
+{
+	/* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+	omap_mux_init_signal("hdmi_hpd",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_cec",
+			OMAP_PIN_INPUT_PULLUP);
+	/* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+	omap_mux_init_signal("hdmi_ddc_scl",
+			OMAP_PIN_INPUT_PULLUP);
+	omap_mux_init_signal("hdmi_ddc_sda",
+			OMAP_PIN_INPUT_PULLUP);
+}
+
 static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 {
 	u32 enable_mask, enable_shift;
@@ -129,6 +144,14 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	return 0;
 }
 
+int omap_hdmi_init(void)
+{
+	if (cpu_is_omap44xx())
+		omap4_hdmi_mux_pads();
+
+	return 0;
+}
+
 static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
 	if (cpu_is_omap44xx())

include/video/omapdss.h

@@ -309,6 +309,8 @@ struct omap_dss_board_info {
 
 /* Init with the board info */
 extern int omap_display_init(struct omap_dss_board_info *board_data);
+/* HDMI mux init*/
+extern int omap_hdmi_init(void);
 
 struct omap_display_platform_data {
 	struct omap_dss_board_info *board_data;