Commit eea53bb1 authored by Russell King's avatar Russell King Committed by Shawn Guo

ARM: dts: cubox-i: add support for PWM-driven front panel LED

The front panel LED on the Cubox-i is driven by one of the iMX6 PWM
channels, and is wired between the PWM output and supply.
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
parent 5b4c180a
...@@ -12,6 +12,19 @@ ir_recv: ir-receiver { ...@@ -12,6 +12,19 @@ ir_recv: ir-receiver {
pinctrl-0 = <&pinctrl_cubox_i_ir>; pinctrl-0 = <&pinctrl_cubox_i_ir>;
}; };
pwmleds {
compatible = "pwm-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
front {
active-low;
label = "imx6:red:front";
max-brightness = <248>;
pwms = <&pwm1 0 50000>;
};
};
regulators { regulators {
compatible = "simple-bus"; compatible = "simple-bus";
...@@ -109,6 +122,10 @@ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 ...@@ -109,6 +122,10 @@ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
>; >;
}; };
pinctrl_cubox_i_pwm1: cubox-i-pwm1-front-led {
fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0>;
};
pinctrl_cubox_i_spdif: cubox-i-spdif { pinctrl_cubox_i_spdif: cubox-i-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment