Skip to content

L
linux
Commit eec94620 authored by Tejun Heo's avatar Tejun Heo Committed by Jens Axboe
Browse files
Options

mg_disk: fold mg_disk.h into mg_disk.c 

include/linux/mg_disk.h is used only by drivers/block/mg_disk.c.  No
reason to put it in a separate header.  Fold it into mg_disk.c.

[ Impact: cleanup ]
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: default avatarJens Axboe <jens.axboe@oracle.com>
parent e138b4e0
Hide whitespace changes
Inline Side-by-side
Showing with 185 additions and 207 deletions
drivers/block/mg_disk.c
View file @ eec94620
......@@ -22,10 +22,194 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/mg_disk.h>
#define MG_RES_SEC (CONFIG_MG_DISK_RES << 1)
/* name for block device */
#define MG_DISK_NAME "mgd"
/* name for platform device */
#define MG_DEV_NAME "mg_disk"
#define MG_DISK_MAJ 0
#define MG_DISK_MAX_PART 16
#define MG_SECTOR_SIZE 512
#define MG_MAX_SECTS 256
/* Register offsets */
#define MG_BUFF_OFFSET 0x8000
#define MG_STORAGE_BUFFER_SIZE 0x200
#define MG_REG_OFFSET 0xC000
#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */
#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */
#define MG_REG_SECT_CNT (MG_REG_OFFSET + 4)
#define MG_REG_SECT_NUM (MG_REG_OFFSET + 6)
#define MG_REG_CYL_LOW (MG_REG_OFFSET + 8)
#define MG_REG_CYL_HIGH (MG_REG_OFFSET + 0xA)
#define MG_REG_DRV_HEAD (MG_REG_OFFSET + 0xC)
#define MG_REG_COMMAND (MG_REG_OFFSET + 0xE) /* write case */
#define MG_REG_STATUS (MG_REG_OFFSET + 0xE) /* read case */
#define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10)
#define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12)
/* "Drive Select/Head Register" bit values */
#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */
#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON)
#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON)
#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON)
/* "Device Control Register" bit values */
#define MG_REG_CTRL_INTR_ENABLE 0x0
#define MG_REG_CTRL_INTR_DISABLE (0x1<<1)
#define MG_REG_CTRL_RESET (0x1<<2)
#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0
#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4)
#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0
#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5)
#define MG_REG_CTRL_DPD_DISABLE 0x0
#define MG_REG_CTRL_DPD_ENABLE (0x1<<6)
/* Status register bit */
/* error bit in status register */
#define MG_REG_STATUS_BIT_ERROR 0x01
/* corrected error in status register */
#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04
/* data request bit in status register */
#define MG_REG_STATUS_BIT_DATA_REQ 0x08
/* DSC - Drive Seek Complete */
#define MG_REG_STATUS_BIT_SEEK_DONE 0x10
/* DWF - Drive Write Fault */
#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20
#define MG_REG_STATUS_BIT_READY 0x40
#define MG_REG_STATUS_BIT_BUSY 0x80
/* handy status */
#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE)
#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \
(MG_REG_STATUS_BIT_BUSY | \
MG_REG_STATUS_BIT_WRITE_FAULT | \
MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY)
/* Error register */
#define MG_REG_ERR_AMNF 0x01
#define MG_REG_ERR_ABRT 0x04
#define MG_REG_ERR_IDNF 0x10
#define MG_REG_ERR_UNC 0x40
#define MG_REG_ERR_BBK 0x80
/* error code for others */
#define MG_ERR_NONE 0
#define MG_ERR_TIMEOUT 0x100
#define MG_ERR_INIT_STAT 0x101
#define MG_ERR_TRANSLATION 0x102
#define MG_ERR_CTRL_RST 0x103
#define MG_ERR_INV_STAT 0x104
#define MG_ERR_RSTOUT 0x105
#define MG_MAX_ERRORS 6 /* Max read/write errors */
/* command */
#define MG_CMD_RD 0x20
#define MG_CMD_WR 0x30
#define MG_CMD_SLEEP 0x99
#define MG_CMD_WAKEUP 0xC3
#define MG_CMD_ID 0xEC
#define MG_CMD_WR_CONF 0x3C
#define MG_CMD_RD_CONF 0x40
/* operation mode */
#define MG_OP_CASCADE (1 << 0)
#define MG_OP_CASCADE_SYNC_RD (1 << 1)
#define MG_OP_CASCADE_SYNC_WR (1 << 2)
#define MG_OP_INTERLEAVE (1 << 3)
/* synchronous */
#define MG_BURST_LAT_4 (3 << 4)
#define MG_BURST_LAT_5 (4 << 4)
#define MG_BURST_LAT_6 (5 << 4)
#define MG_BURST_LAT_7 (6 << 4)
#define MG_BURST_LAT_8 (7 << 4)
#define MG_BURST_LEN_4 (1 << 1)
#define MG_BURST_LEN_8 (2 << 1)
#define MG_BURST_LEN_16 (3 << 1)
#define MG_BURST_LEN_32 (4 << 1)
#define MG_BURST_LEN_CONT (0 << 1)
/* timeout value (unit: ms) */
#define MG_TMAX_CONF_TO_CMD 1
#define MG_TMAX_WAIT_RD_DRQ 10
#define MG_TMAX_WAIT_WR_DRQ 500
#define MG_TMAX_RST_TO_BUSY 10
#define MG_TMAX_HDRST_TO_RDY 500
#define MG_TMAX_SWRST_TO_RDY 500
#define MG_TMAX_RSTOUT 3000
/* device attribution */
/* use mflash as boot device */
#define MG_BOOT_DEV (1 << 0)
/* use mflash as storage device */
#define MG_STORAGE_DEV (1 << 1)
/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
#define MG_STORAGE_DEV_SKIP_RST (1 << 2)
#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
/* names of GPIO resource */
#define MG_RST_PIN "mg_rst"
/* except MG_BOOT_DEV, reset-out pin should be assigned */
#define MG_RSTOUT_PIN "mg_rstout"
/* private driver data */
struct mg_drv_data {
/* disk resource */
u32 use_polling;
/* device attribution */
u32 dev_attr;
/* internally used */
struct mg_host *host;
};
/* main structure for mflash driver */
struct mg_host {
struct device *dev;
struct request_queue *breq;
spinlock_t lock;
struct gendisk *gd;
struct timer_list timer;
void (*mg_do_intr) (struct mg_host *);
u16 id[ATA_ID_WORDS];
u16 cyls;
u16 heads;
u16 sectors;
u32 n_sectors;
u32 nres_sectors;
void __iomem *dev_base;
unsigned int irq;
unsigned int rst;
unsigned int rstout;
u32 major;
u32 error;
};
/*
* Debugging macro and defines
*/
#undef DO_MG_DEBUG
#ifdef DO_MG_DEBUG
# define MG_DBG(fmt, args...) \
printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args)
#else /* CONFIG_MG_DEBUG */
# define MG_DBG(fmt, args...) do { } while (0)
#endif /* CONFIG_MG_DEBUG */
static void mg_request(struct request_queue *);
static void mg_dump_status(const char *msg, unsigned int stat,
......
include/linux/mg_disk.h deleted 100644 → 0
View file @ e138b4e0
/*
* include/linux/mg_disk.c
*
* Support for the mGine m[g]flash IO mode.
* Based on legacy hd.c
*
* (c) 2008 mGine Co.,LTD
* (c) 2008 unsik Kim <donari75@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MG_DISK_H__
#define __MG_DISK_H__
#include <linux/blkdev.h>
#include <linux/ata.h>
/* name for block device */
#define MG_DISK_NAME "mgd"
/* name for platform device */
#define MG_DEV_NAME "mg_disk"
#define MG_DISK_MAJ 0
#define MG_DISK_MAX_PART 16
#define MG_SECTOR_SIZE 512
#define MG_MAX_SECTS 256
/* Register offsets */
#define MG_BUFF_OFFSET 0x8000
#define MG_STORAGE_BUFFER_SIZE 0x200
#define MG_REG_OFFSET 0xC000
#define MG_REG_FEATURE (MG_REG_OFFSET + 2) /* write case */
#define MG_REG_ERROR (MG_REG_OFFSET + 2) /* read case */
#define MG_REG_SECT_CNT (MG_REG_OFFSET + 4)
#define MG_REG_SECT_NUM (MG_REG_OFFSET + 6)
#define MG_REG_CYL_LOW (MG_REG_OFFSET + 8)
#define MG_REG_CYL_HIGH (MG_REG_OFFSET + 0xA)
#define MG_REG_DRV_HEAD (MG_REG_OFFSET + 0xC)
#define MG_REG_COMMAND (MG_REG_OFFSET + 0xE) /* write case */
#define MG_REG_STATUS (MG_REG_OFFSET + 0xE) /* read case */
#define MG_REG_DRV_CTRL (MG_REG_OFFSET + 0x10)
#define MG_REG_BURST_CTRL (MG_REG_OFFSET + 0x12)
/* "Drive Select/Head Register" bit values */
#define MG_REG_HEAD_MUST_BE_ON 0xA0 /* These 2 bits are always on */
#define MG_REG_HEAD_DRIVE_MASTER (0x00 | MG_REG_HEAD_MUST_BE_ON)
#define MG_REG_HEAD_DRIVE_SLAVE (0x10 | MG_REG_HEAD_MUST_BE_ON)
#define MG_REG_HEAD_LBA_MODE (0x40 | MG_REG_HEAD_MUST_BE_ON)
/* "Device Control Register" bit values */
#define MG_REG_CTRL_INTR_ENABLE 0x0
#define MG_REG_CTRL_INTR_DISABLE (0x1<<1)
#define MG_REG_CTRL_RESET (0x1<<2)
#define MG_REG_CTRL_INTR_POLA_ACTIVE_HIGH 0x0
#define MG_REG_CTRL_INTR_POLA_ACTIVE_LOW (0x1<<4)
#define MG_REG_CTRL_DPD_POLA_ACTIVE_LOW 0x0
#define MG_REG_CTRL_DPD_POLA_ACTIVE_HIGH (0x1<<5)
#define MG_REG_CTRL_DPD_DISABLE 0x0
#define MG_REG_CTRL_DPD_ENABLE (0x1<<6)
/* Status register bit */
/* error bit in status register */
#define MG_REG_STATUS_BIT_ERROR 0x01
/* corrected error in status register */
#define MG_REG_STATUS_BIT_CORRECTED_ERROR 0x04
/* data request bit in status register */
#define MG_REG_STATUS_BIT_DATA_REQ 0x08
/* DSC - Drive Seek Complete */
#define MG_REG_STATUS_BIT_SEEK_DONE 0x10
/* DWF - Drive Write Fault */
#define MG_REG_STATUS_BIT_WRITE_FAULT 0x20
#define MG_REG_STATUS_BIT_READY 0x40
#define MG_REG_STATUS_BIT_BUSY 0x80
/* handy status */
#define MG_STAT_READY (MG_REG_STATUS_BIT_READY | MG_REG_STATUS_BIT_SEEK_DONE)
#define MG_READY_OK(s) (((s) & (MG_STAT_READY | \
(MG_REG_STATUS_BIT_BUSY | \
MG_REG_STATUS_BIT_WRITE_FAULT | \
MG_REG_STATUS_BIT_ERROR))) == MG_STAT_READY)
/* Error register */
#define MG_REG_ERR_AMNF 0x01
#define MG_REG_ERR_ABRT 0x04
#define MG_REG_ERR_IDNF 0x10
#define MG_REG_ERR_UNC 0x40
#define MG_REG_ERR_BBK 0x80
/* error code for others */
#define MG_ERR_NONE 0
#define MG_ERR_TIMEOUT 0x100
#define MG_ERR_INIT_STAT 0x101
#define MG_ERR_TRANSLATION 0x102
#define MG_ERR_CTRL_RST 0x103
#define MG_ERR_INV_STAT 0x104
#define MG_ERR_RSTOUT 0x105
#define MG_MAX_ERRORS 6 /* Max read/write errors */
/* command */
#define MG_CMD_RD 0x20
#define MG_CMD_WR 0x30
#define MG_CMD_SLEEP 0x99
#define MG_CMD_WAKEUP 0xC3
#define MG_CMD_ID 0xEC
#define MG_CMD_WR_CONF 0x3C
#define MG_CMD_RD_CONF 0x40
/* operation mode */
#define MG_OP_CASCADE (1 << 0)
#define MG_OP_CASCADE_SYNC_RD (1 << 1)
#define MG_OP_CASCADE_SYNC_WR (1 << 2)
#define MG_OP_INTERLEAVE (1 << 3)
/* synchronous */
#define MG_BURST_LAT_4 (3 << 4)
#define MG_BURST_LAT_5 (4 << 4)
#define MG_BURST_LAT_6 (5 << 4)
#define MG_BURST_LAT_7 (6 << 4)
#define MG_BURST_LAT_8 (7 << 4)
#define MG_BURST_LEN_4 (1 << 1)
#define MG_BURST_LEN_8 (2 << 1)
#define MG_BURST_LEN_16 (3 << 1)
#define MG_BURST_LEN_32 (4 << 1)
#define MG_BURST_LEN_CONT (0 << 1)
/* timeout value (unit: ms) */
#define MG_TMAX_CONF_TO_CMD 1
#define MG_TMAX_WAIT_RD_DRQ 10
#define MG_TMAX_WAIT_WR_DRQ 500
#define MG_TMAX_RST_TO_BUSY 10
#define MG_TMAX_HDRST_TO_RDY 500
#define MG_TMAX_SWRST_TO_RDY 500
#define MG_TMAX_RSTOUT 3000
/* device attribution */
/* use mflash as boot device */
#define MG_BOOT_DEV (1 << 0)
/* use mflash as storage device */
#define MG_STORAGE_DEV (1 << 1)
/* same as MG_STORAGE_DEV, but bootloader already done reset sequence */
#define MG_STORAGE_DEV_SKIP_RST (1 << 2)
#define MG_DEV_MASK (MG_BOOT_DEV | MG_STORAGE_DEV | MG_STORAGE_DEV_SKIP_RST)
/* names of GPIO resource */
#define MG_RST_PIN "mg_rst"
/* except MG_BOOT_DEV, reset-out pin should be assigned */
#define MG_RSTOUT_PIN "mg_rstout"
/* private driver data */
struct mg_drv_data {
/* disk resource */
u32 use_polling;
/* device attribution */
u32 dev_attr;
/* internally used */
struct mg_host *host;
};
/* main structure for mflash driver */
struct mg_host {
struct device *dev;
struct request_queue *breq;
spinlock_t lock;
struct gendisk *gd;
struct timer_list timer;
void (*mg_do_intr) (struct mg_host *);
u16 id[ATA_ID_WORDS];
u16 cyls;
u16 heads;
u16 sectors;
u32 n_sectors;
u32 nres_sectors;
void __iomem *dev_base;
unsigned int irq;
unsigned int rst;
unsigned int rstout;
u32 major;
u32 error;
};
/*
* Debugging macro and defines
*/
#undef DO_MG_DEBUG
#ifdef DO_MG_DEBUG
# define MG_DBG(fmt, args...) \
printk(KERN_DEBUG "%s:%d "fmt, __func__, __LINE__, ##args)
#else /* CONFIG_MG_DEBUG */
# define MG_DBG(fmt, args...) do { } while (0)
#endif /* CONFIG_MG_DEBUG */
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7