bnx2x: Add timestamping and PTP hardware clock support

This adds a PHC to the bnx2x driver. Driver supports timestamping send/receive
PTP packets, as well as adjusting the on-chip clock.

The driver has been tested with linuxptp project.
Signed-off-by: Michal Kalderon <Michal.Kalderon@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -20,6 +20,10 @@
 #include <linux/types.h>
 #include <linux/pci_regs.h>
 
+#include <linux/ptp_clock_kernel.h>
+#include <linux/net_tstamp.h>
+#include <linux/clocksource.h>
+
 /* compilation time flags */
 
 /* define this to make the driver freeze on error to allow getting debug info
@@ -70,6 +74,7 @@ enum bnx2x_int_mode {
 #define BNX2X_MSG_SP			0x0100000 /* was: NETIF_MSG_INTR */
 #define BNX2X_MSG_FP			0x0200000 /* was: NETIF_MSG_INTR */
 #define BNX2X_MSG_IOV			0x0800000
+#define BNX2X_MSG_PTP			0x1000000
 #define BNX2X_MSG_IDLE			0x2000000 /* used for idle check*/
 #define BNX2X_MSG_ETHTOOL		0x4000000
 #define BNX2X_MSG_DCB			0x8000000
@@ -1591,6 +1596,8 @@ struct bnx2x {
 #define BC_SUPPORTS_RMMOD_CMD		(1 << 24)
 #define HAS_PHYS_PORT_ID		(1 << 25)
 #define AER_ENABLED			(1 << 26)
+#define PTP_SUPPORTED			(1 << 27)
+#define TX_TIMESTAMPING_EN		(1 << 28)
 
 #define BP_NOMCP(bp)			((bp)->flags & NO_MCP_FLAG)
 
@@ -1933,6 +1940,19 @@ struct bnx2x {
 
 	u8					phys_port_id[ETH_ALEN];
 
+	/* PTP related context */
+	struct ptp_clock *ptp_clock;
+	struct ptp_clock_info ptp_clock_info;
+	struct work_struct ptp_task;
+	struct cyclecounter cyclecounter;
+	struct timecounter timecounter;
+	bool timecounter_init_done;
+	struct sk_buff *ptp_tx_skb;
+	unsigned long ptp_tx_start;
+	bool hwtstamp_ioctl_called;
+	u16 tx_type;
+	u16 rx_filter;
+
 	struct bnx2x_link_report_data		vf_link_vars;
 };
 
@@ -2559,4 +2579,11 @@ void bnx2x_update_mng_version(struct bnx2x *bp);
 
 #define E1H_MAX_MF_SB_COUNT (HC_SB_MAX_SB_E1X/(E1HVN_MAX * PORT_MAX))
 
+void bnx2x_init_ptp(struct bnx2x *bp);
+int bnx2x_configure_ptp_filters(struct bnx2x *bp);
+void bnx2x_set_rx_ts(struct bnx2x *bp, struct sk_buff *skb);
+
+#define BNX2X_MAX_PHC_DRIFT 31000000
+#define BNX2X_PTP_TX_TIMEOUT
+
 #endif /* bnx2x.h */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -1067,6 +1067,11 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 
 		skb_record_rx_queue(skb, fp->rx_queue);
 
+		/* Check if this packet was timestamped */
+		if (unlikely(le16_to_cpu(cqe->fast_path_cqe.type_error_flags) &
+			     (1 << ETH_FAST_PATH_RX_CQE_PTP_PKT_SHIFT)))
+			bnx2x_set_rx_ts(bp, skb);
+
 		if (le16_to_cpu(cqe_fp->pars_flags.flags) &
 		    PARSING_FLAGS_VLAN)
 			__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
@@ -2808,7 +2813,11 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	/* Initialize Rx filter. */
 	bnx2x_set_rx_mode_inner(bp);
 
-	/* Start the Tx */
+	if (bp->flags & PTP_SUPPORTED) {
+		bnx2x_init_ptp(bp);
+		bnx2x_configure_ptp_filters(bp);
+	}
+	/* Start Tx */
 	switch (load_mode) {
 	case LOAD_NORMAL:
 		/* Tx queue should be only re-enabled */
@@ -3833,6 +3842,20 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
 
+	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+		if (!(bp->flags & TX_TIMESTAMPING_EN)) {
+			BNX2X_ERR("Tx timestamping was not enabled, this packet will not be timestamped\n");
+		} else if (bp->ptp_tx_skb) {
+			BNX2X_ERR("The device supports only a single outstanding packet to timestamp, this packet will not be timestamped\n");
+		} else {
+			skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+			/* schedule check for Tx timestamp */
+			bp->ptp_tx_skb = skb_get(skb);
+			bp->ptp_tx_start = jiffies;
+			schedule_work(&bp->ptp_task);
+		}
+	}
+
 	/* header nbd: indirectly zero other flags! */
 	tx_start_bd->general_data = 1 << ETH_TX_START_BD_HDR_NBDS_SHIFT;
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -3481,6 +3481,46 @@ static int bnx2x_set_channels(struct net_device *dev,
 	return bnx2x_nic_load(bp, LOAD_NORMAL);
 }
 
+static int bnx2x_get_ts_info(struct net_device *dev,
+			     struct ethtool_ts_info *info)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	if (bp->flags & PTP_SUPPORTED) {
+		info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE |
+					SOF_TIMESTAMPING_RX_SOFTWARE |
+					SOF_TIMESTAMPING_SOFTWARE |
+					SOF_TIMESTAMPING_TX_HARDWARE |
+					SOF_TIMESTAMPING_RX_HARDWARE |
+					SOF_TIMESTAMPING_RAW_HARDWARE;
+
+		if (bp->ptp_clock)
+			info->phc_index = ptp_clock_index(bp->ptp_clock);
+		else
+			info->phc_index = -1;
+
+		info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
+				   (1 << HWTSTAMP_FILTER_PTP_V1_L4_EVENT) |
+				   (1 << HWTSTAMP_FILTER_PTP_V1_L4_SYNC) |
+				   (1 << HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_L4_EVENT) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_L4_SYNC) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_L2_EVENT) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_L2_SYNC) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_EVENT) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_SYNC) |
+				   (1 << HWTSTAMP_FILTER_PTP_V2_DELAY_REQ);
+
+		info->tx_types = (1 << HWTSTAMP_TX_OFF)|(1 << HWTSTAMP_TX_ON);
+
+		return 0;
+	}
+
+	return ethtool_op_get_ts_info(dev, info);
+}
+
 static const struct ethtool_ops bnx2x_ethtool_ops = {
 	.get_settings		= bnx2x_get_settings,
 	.set_settings		= bnx2x_set_settings,
@@ -3522,7 +3562,7 @@ static const struct ethtool_ops bnx2x_ethtool_ops = {
 	.get_module_eeprom	= bnx2x_get_module_eeprom,
 	.get_eee		= bnx2x_get_eee,
 	.set_eee		= bnx2x_set_eee,
-	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_ts_info		= bnx2x_get_ts_info,
 };
 
 static const struct ethtool_ops bnx2x_vf_ethtool_ops = {

drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h

@@ -3547,7 +3547,9 @@ struct client_init_rx_data {
 	__le16 rx_cos_mask;
 	__le16 silent_vlan_value;
 	__le16 silent_vlan_mask;
-	__le32 reserved6[2];
+	u8 handle_ptp_pkts_flg;
+	u8 reserved6[3];
+	__le32 reserved7;
 };
 
 /*
@@ -3616,7 +3618,9 @@ struct client_update_ramrod_data {
 	u8 refuse_outband_vlan_change_flg;
 	u8 tx_switching_flg;
 	u8 tx_switching_change_flg;
-	__le32 reserved1;
+	u8 handle_ptp_pkts_flg;
+	u8 handle_ptp_pkts_change_flg;
+	__le16 reserved1;
 	__le32 echo;
 };
 
@@ -3850,8 +3854,10 @@ struct eth_fast_path_rx_cqe {
 #define ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG_SHIFT 4
 #define ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG (0x1<<5)
 #define ETH_FAST_PATH_RX_CQE_L4_BAD_XSUM_FLG_SHIFT 5
-#define ETH_FAST_PATH_RX_CQE_RESERVED0 (0x3<<6)
-#define ETH_FAST_PATH_RX_CQE_RESERVED0_SHIFT 6
+#define ETH_FAST_PATH_RX_CQE_PTP_PKT (0x1<<6)
+#define ETH_FAST_PATH_RX_CQE_PTP_PKT_SHIFT 6
+#define ETH_FAST_PATH_RX_CQE_RESERVED0 (0x1<<7)
+#define ETH_FAST_PATH_RX_CQE_RESERVED0_SHIFT 7
 	u8 status_flags;
 #define ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE (0x7<<0)
 #define ETH_FAST_PATH_RX_CQE_RSS_HASH_TYPE_SHIFT 0
@@ -5658,6 +5664,16 @@ struct protocol_common_spe {
 	union protocol_common_specific_data data;
 };
 
+/* The data for the Set Timesync Ramrod */
+struct set_timesync_ramrod_data {
+	u8 drift_adjust_cmd;
+	u8 offset_cmd;
+	u8 add_sub_drift_adjust_value;
+	u8 drift_adjust_value;
+	u32 drift_adjust_period;
+	struct regpair offset_delta;
+};
+
 /*
  * The send queue element
  */
@@ -5780,6 +5796,29 @@ struct tstorm_vf_zone_data {
 	struct regpair reserved;
 };
 
+/* Add or Subtract Value for Set Timesync Ramrod */
+enum ts_add_sub_value {
+	TS_SUB_VALUE,
+	TS_ADD_VALUE,
+	MAX_TS_ADD_SUB_VALUE
+};
+
+/* Drift-Adjust Commands for Set Timesync Ramrod */
+enum ts_drift_adjust_cmd {
+	TS_DRIFT_ADJUST_KEEP,
+	TS_DRIFT_ADJUST_SET,
+	TS_DRIFT_ADJUST_RESET,
+	MAX_TS_DRIFT_ADJUST_CMD
+};
+
+/* Offset Commands for Set Timesync Ramrod */
+enum ts_offset_cmd {
+	TS_OFFSET_KEEP,
+	TS_OFFSET_INC,
+	TS_OFFSET_DEC,
+	MAX_TS_OFFSET_CMD
+};
+
 /* Tunnel Mode */
 enum tunnel_mode {
 	TUNN_MODE_NONE,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c

@@ -4725,6 +4725,12 @@ static void bnx2x_q_fill_update_data(struct bnx2x *bp,
 	data->tx_switching_change_flg =
 		test_bit(BNX2X_Q_UPDATE_TX_SWITCHING_CHNG,
 			 &params->update_flags);
+
+	/* PTP */
+	data->handle_ptp_pkts_flg =
+		test_bit(BNX2X_Q_UPDATE_PTP_PKTS, &params->update_flags);
+	data->handle_ptp_pkts_change_flg =
+		test_bit(BNX2X_Q_UPDATE_PTP_PKTS_CHNG, &params->update_flags);
 }
 
 static inline int bnx2x_q_send_update(struct bnx2x *bp,
@@ -5379,6 +5385,10 @@ static int bnx2x_func_chk_transition(struct bnx2x *bp,
 			 (!test_bit(BNX2X_F_CMD_STOP, &o->pending)))
 			next_state = BNX2X_F_STATE_STARTED;
 
+		else if ((cmd == BNX2X_F_CMD_SET_TIMESYNC) &&
+			 (!test_bit(BNX2X_F_CMD_STOP, &o->pending)))
+			next_state = BNX2X_F_STATE_STARTED;
+
 		else if (cmd == BNX2X_F_CMD_TX_STOP)
 			next_state = BNX2X_F_STATE_TX_STOPPED;
 
@@ -5388,6 +5398,10 @@ static int bnx2x_func_chk_transition(struct bnx2x *bp,
 		    (!test_bit(BNX2X_F_CMD_STOP, &o->pending)))
 			next_state = BNX2X_F_STATE_TX_STOPPED;
 
+		else if ((cmd == BNX2X_F_CMD_SET_TIMESYNC) &&
+			 (!test_bit(BNX2X_F_CMD_STOP, &o->pending)))
+			next_state = BNX2X_F_STATE_TX_STOPPED;
+
 		else if (cmd == BNX2X_F_CMD_TX_START)
 			next_state = BNX2X_F_STATE_STARTED;
 
@@ -5843,6 +5857,40 @@ static inline int bnx2x_func_send_tx_start(struct bnx2x *bp,
 			     U64_LO(data_mapping), NONE_CONNECTION_TYPE);
 }
 
+static inline
+int bnx2x_func_send_set_timesync(struct bnx2x *bp,
+				 struct bnx2x_func_state_params *params)
+{
+	struct bnx2x_func_sp_obj *o = params->f_obj;
+	struct set_timesync_ramrod_data *rdata =
+		(struct set_timesync_ramrod_data *)o->rdata;
+	dma_addr_t data_mapping = o->rdata_mapping;
+	struct bnx2x_func_set_timesync_params *set_timesync_params =
+		&params->params.set_timesync;
+
+	memset(rdata, 0, sizeof(*rdata));
+
+	/* Fill the ramrod data with provided parameters */
+	rdata->drift_adjust_cmd = set_timesync_params->drift_adjust_cmd;
+	rdata->offset_cmd = set_timesync_params->offset_cmd;
+	rdata->add_sub_drift_adjust_value =
+		set_timesync_params->add_sub_drift_adjust_value;
+	rdata->drift_adjust_value = set_timesync_params->drift_adjust_value;
+	rdata->drift_adjust_period = set_timesync_params->drift_adjust_period;
+	rdata->offset_delta.lo = U64_LO(set_timesync_params->offset_delta);
+	rdata->offset_delta.hi = U64_HI(set_timesync_params->offset_delta);
+
+	DP(BNX2X_MSG_SP, "Set timesync command params: drift_cmd = %d, offset_cmd = %d, add_sub_drift = %d, drift_val = %d, drift_period = %d, offset_lo = %d, offset_hi = %d\n",
+	   rdata->drift_adjust_cmd, rdata->offset_cmd,
+	   rdata->add_sub_drift_adjust_value, rdata->drift_adjust_value,
+	   rdata->drift_adjust_period, rdata->offset_delta.lo,
+	   rdata->offset_delta.hi);
+
+	return bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_SET_TIMESYNC, 0,
+			     U64_HI(data_mapping),
+			     U64_LO(data_mapping), NONE_CONNECTION_TYPE);
+}
+
 static int bnx2x_func_send_cmd(struct bnx2x *bp,
 			       struct bnx2x_func_state_params *params)
 {
@@ -5865,6 +5913,8 @@ static int bnx2x_func_send_cmd(struct bnx2x *bp,
 		return bnx2x_func_send_tx_start(bp, params);
 	case BNX2X_F_CMD_SWITCH_UPDATE:
 		return bnx2x_func_send_switch_update(bp, params);
+	case BNX2X_F_CMD_SET_TIMESYNC:
+		return bnx2x_func_send_set_timesync(bp, params);
 	default:
 		BNX2X_ERR("Unknown command: %d\n", params->cmd);
 		return -EINVAL;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h

@@ -770,7 +770,9 @@ enum {
 	BNX2X_Q_UPDATE_SILENT_VLAN_REM_CHNG,
 	BNX2X_Q_UPDATE_SILENT_VLAN_REM,
 	BNX2X_Q_UPDATE_TX_SWITCHING_CHNG,
-	BNX2X_Q_UPDATE_TX_SWITCHING
+	BNX2X_Q_UPDATE_TX_SWITCHING,
+	BNX2X_Q_UPDATE_PTP_PKTS_CHNG,
+	BNX2X_Q_UPDATE_PTP_PKTS,
 };
 
 /* Allowed Queue states */
@@ -853,6 +855,10 @@ enum bnx2x_q_type {
 #define BNX2X_MULTI_TX_COS			3 /* Maximum possible */
 
 #define MAC_PAD (ALIGN(ETH_ALEN, sizeof(u32)) - ETH_ALEN)
+/* DMAE channel to be used by FW for timesync workaroun. A driver that sends
+ * timesync-related ramrods must not use this DMAE command ID.
+ */
+#define FW_DMAE_CMD_ID 6
 
 struct bnx2x_queue_init_params {
 	struct {
@@ -1117,6 +1123,7 @@ enum bnx2x_func_cmd {
 	BNX2X_F_CMD_TX_STOP,
 	BNX2X_F_CMD_TX_START,
 	BNX2X_F_CMD_SWITCH_UPDATE,
+	BNX2X_F_CMD_SET_TIMESYNC,
 	BNX2X_F_CMD_MAX,
 };
 
@@ -1191,6 +1198,7 @@ struct bnx2x_func_afex_viflists_params {
 	u8 afex_vif_list_command;
 	u8 func_to_clear;
 };
+
 struct bnx2x_func_tx_start_params {
 	struct priority_cos traffic_type_to_priority_cos[MAX_TRAFFIC_TYPES];
 	u8 dcb_enabled;
@@ -1198,6 +1206,24 @@ struct bnx2x_func_tx_start_params {
 	u8 dont_add_pri_0_en;
 };
 
+struct bnx2x_func_set_timesync_params {
+	/* Reset, set or keep the current drift value */
+	u8 drift_adjust_cmd;
+
+	/* Dec, inc or keep the current offset */
+	u8 offset_cmd;
+
+	/* Drift value direction */
+	u8 add_sub_drift_adjust_value;
+
+	/* Drift, period and offset values to be used according to the commands
+	 * above.
+	 */
+	u8 drift_adjust_value;
+	u32 drift_adjust_period;
+	u64 offset_delta;
+};
+
 struct bnx2x_func_state_params {
 	struct bnx2x_func_sp_obj *f_obj;
 
@@ -1216,6 +1242,7 @@ struct bnx2x_func_state_params {
 		struct bnx2x_func_afex_update_params afex_update;
 		struct bnx2x_func_afex_viflists_params afex_viflists;
 		struct bnx2x_func_tx_start_params tx_start;
+		struct bnx2x_func_set_timesync_params set_timesync;
 	} params;
 };