Merge tag 'samsung-dt64-4.12' of...

Merge tag 'samsung-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64

Samsung DeviceTree ARM64 update for v4.12:
1. Add IR, touchscreen and panel to TM2/TM2E boards.
2. Add proper clock frequency properties to DSI nodes.

* tag 'samsung-dt64-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Add the burst and esc clock frequency properties to DSI node
  arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board
  arm64: dts: exynos: Add stmfts touchscreen node for TM2 and TM2E
  arm64: dts: exynos: Enable ir-spi in the TM2 and TM2E boards
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi

@@ -106,6 +106,13 @@ max98504: max98504@31 {
 		};
 	};
 
+	irda_regulator: irda-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>;
+		regulator-name = "irda_regulator";
+	};
+
 	sound {
 		compatible = "samsung,tm2-audio";
 		audio-codec = <&wm5110>;
@@ -298,6 +305,8 @@ &dsi {
 	status = "okay";
 	vddcore-supply = <&ldo6_reg>;
 	vddio-supply = <&ldo7_reg>;
+	samsung,burst-clock-frequency = <512000000>;
+	samsung,esc-clock-frequency = <16000000>;
 	samsung,pll-clock-frequency = <24000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&te_irq>;
@@ -749,6 +758,19 @@ buck10_reg: BUCK10 {
 	};
 };
 
+&hsi2c_5 {
+	status = "okay";
+
+	stmfts: touchscreen@49 {
+		compatible = "st,stmfts";
+		reg = <0x49>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		avdd-supply = <&ldo30_reg>;
+		vdd-supply = <&ldo31_reg>;
+	};
+};
+
 &hsi2c_7 {
 	status = "okay";
 
@@ -894,7 +916,7 @@ initial_alive: initial-state {
 		PIN(INPUT, gpa0-7, NONE, FAST_SR1);
 
 		PIN(INPUT, gpa1-0, UP, FAST_SR1);
-		PIN(INPUT, gpa1-1, NONE, FAST_SR1);
+		PIN(INPUT, gpa1-1, UP, FAST_SR1);
 		PIN(INPUT, gpa1-2, NONE, FAST_SR1);
 		PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
 		PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
@@ -1074,7 +1096,6 @@ initial_peric: initial-state {
 		PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
 		PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
 		PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpg3-7, DOWN, FAST_SR1);
 	};
 };
 
@@ -1152,6 +1173,24 @@ controller-data {
 	};
 };
 
+&spi_3 {
+	status = "okay";
+	no-cs-readback;
+
+	irled@0 {
+		compatible = "ir-spi-led";
+		reg = <0x0>;
+		spi-max-frequency = <5000000>;
+		power-supply = <&irda_regulator>;
+		duty-cycle = <60>;
+		led-active-low;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
+	};
+};
+
 &timer {
 	clock-frequency = <24000000>;
 };

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts

@@ -52,6 +52,18 @@ &cmu_disp {
 	assigned-clock-rates = <250000000>, <400000000>;
 };
 
+&dsi {
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &hsi2c_9 {
 	status = "okay";
 
@@ -76,3 +88,8 @@ &ldo38_reg {
 	regulator-min-microvolt = <3000000>;
 	regulator-max-microvolt = <3000000>;
 };
+
+&stmfts {
+	touchscreen-size-x = <1439>;
+	touchscreen-size-y = <2559>;
+};

arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts

@@ -63,3 +63,10 @@ &ldo38_reg {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 };
+
+&stmfts {
+	touchscreen-size-x = <1599>;
+	touchscreen-size-y = <2559>;
+	touch-key-connected;
+	ledvdd-supply = <&ldo33_reg>;
+};