Merge pcnet32 conflicting updates manually

Documentation/tty.txt

@@ -93,6 +93,11 @@ write_wakeup()	-	May be called at any point between open and close.
 			ldisc must be careful about setting order and to
 			handle unexpected calls. Must not sleep.
 
+			The driver is forbidden from calling this directly
+			from the ->write call from the ldisc as the ldisc
+			is permitted to call the driver write method from
+			this function. In such a situation defer it.
+
 
 Locking
 

drivers/char/stallion.c

@@ -174,14 +174,6 @@ static stlport_t	stl_dummyport;
  */
 static char		stl_unwanted[SC26198_RXFIFOSIZE];
 
-/*
- *	Keep track of what interrupts we have requested for us.
- *	We don't need to request an interrupt twice if it is being
- *	shared with another Stallion board.
- */
-static int	stl_gotintrs[STL_MAXBRDS];
-static int	stl_numintrs;
-
 /*****************************************************************************/
 
 static stlbrd_t		*stl_brds[STL_MAXBRDS];
@@ -504,7 +496,6 @@ static int	stl_readproc(char *page, char **start, off_t off, int count, int *eof
 
 static int	stl_brdinit(stlbrd_t *brdp);
 static int	stl_initports(stlbrd_t *brdp, stlpanel_t *panelp);
-static int	stl_mapirq(int irq, char *name);
 static int	stl_getserial(stlport_t *portp, struct serial_struct __user *sp);
 static int	stl_setserial(stlport_t *portp, struct serial_struct __user *sp);
 static int	stl_getbrdstats(combrd_t __user *bp);
@@ -513,11 +504,11 @@ static int	stl_clrportstats(stlport_t *portp, comstats_t __user *cp);
 static int	stl_getportstruct(stlport_t __user *arg);
 static int	stl_getbrdstruct(stlbrd_t __user *arg);
 static int	stl_waitcarrier(stlport_t *portp, struct file *filp);
-static void	stl_eiointr(stlbrd_t *brdp);
-static void	stl_echatintr(stlbrd_t *brdp);
-static void	stl_echmcaintr(stlbrd_t *brdp);
-static void	stl_echpciintr(stlbrd_t *brdp);
-static void	stl_echpci64intr(stlbrd_t *brdp);
+static int	stl_eiointr(stlbrd_t *brdp);
+static int	stl_echatintr(stlbrd_t *brdp);
+static int	stl_echmcaintr(stlbrd_t *brdp);
+static int	stl_echpciintr(stlbrd_t *brdp);
+static int	stl_echpci64intr(stlbrd_t *brdp);
 static void	stl_offintr(void *private);
 static void	*stl_memalloc(int len);
 static stlbrd_t *stl_allocbrd(void);
@@ -807,6 +798,9 @@ static void __exit stallion_module_exit(void)
 	for (i = 0; (i < stl_nrbrds); i++) {
 		if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL)
 			continue;
+
+		free_irq(brdp->irq, brdp);
+
 		for (j = 0; (j < STL_MAXPANELS); j++) {
 			panelp = brdp->panels[j];
 			if (panelp == (stlpanel_t *) NULL)
@@ -832,9 +826,6 @@ static void __exit stallion_module_exit(void)
 		stl_brds[i] = (stlbrd_t *) NULL;
 	}
 
-	for (i = 0; (i < stl_numintrs); i++)
-		free_irq(stl_gotintrs[i], NULL);
-
 	restore_flags(flags);
 }
 
@@ -1992,23 +1983,14 @@ static int stl_readproc(char *page, char **start, off_t off, int count, int *eof
 
 static irqreturn_t stl_intr(int irq, void *dev_id, struct pt_regs *regs)
 {
-	stlbrd_t	*brdp;
-	int		i;
-	int handled = 0;
+	stlbrd_t	*brdp = (stlbrd_t *) dev_id;
 
 #ifdef DEBUG
-	printk("stl_intr(irq=%d,regs=%x)\n", irq, (int) regs);
+	printk("stl_intr(brdp=%x,irq=%d,regs=%x)\n", (int) brdp, irq,
+	    (int) regs);
 #endif
 
-	for (i = 0; (i < stl_nrbrds); i++) {
-		if ((brdp = stl_brds[i]) == (stlbrd_t *) NULL)
-			continue;
-		if (brdp->state == 0)
-			continue;
-		handled = 1;
-		(* brdp->isr)(brdp);
-	}
-	return IRQ_RETVAL(handled);
+	return IRQ_RETVAL((* brdp->isr)(brdp));
 }
 
 /*****************************************************************************/
@@ -2017,15 +1999,19 @@ static irqreturn_t stl_intr(int irq, void *dev_id, struct pt_regs *regs)
  *	Interrupt service routine for EasyIO board types.
  */
 
-static void stl_eiointr(stlbrd_t *brdp)
+static int stl_eiointr(stlbrd_t *brdp)
 {
 	stlpanel_t	*panelp;
 	unsigned int	iobase;
+	int		handled = 0;
 
 	panelp = brdp->panels[0];
 	iobase = panelp->iobase;
-	while (inb(brdp->iostatus) & EIO_INTRPEND)
+	while (inb(brdp->iostatus) & EIO_INTRPEND) {
+		handled = 1;
 		(* panelp->isr)(panelp, iobase);
+	}
+	return handled;
 }
 
 /*****************************************************************************/
@@ -2034,15 +2020,17 @@ static void stl_eiointr(stlbrd_t *brdp)
  *	Interrupt service routine for ECH-AT board types.
  */
 
-static void stl_echatintr(stlbrd_t *brdp)
+static int stl_echatintr(stlbrd_t *brdp)
 {
 	stlpanel_t	*panelp;
 	unsigned int	ioaddr;
 	int		bnknr;
+	int		handled = 0;
 
 	outb((brdp->ioctrlval | ECH_BRDENABLE), brdp->ioctrl);
 
 	while (inb(brdp->iostatus) & ECH_INTRPEND) {
+		handled = 1;
 		for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
 			ioaddr = brdp->bnkstataddr[bnknr];
 			if (inb(ioaddr) & ECH_PNLINTRPEND) {
@@ -2053,6 +2041,8 @@ static void stl_echatintr(stlbrd_t *brdp)
 	}
 
 	outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
+
+	return handled;
 }
 
 /*****************************************************************************/
@@ -2061,13 +2051,15 @@ static void stl_echatintr(stlbrd_t *brdp)
  *	Interrupt service routine for ECH-MCA board types.
  */
 
-static void stl_echmcaintr(stlbrd_t *brdp)
+static int stl_echmcaintr(stlbrd_t *brdp)
 {
 	stlpanel_t	*panelp;
 	unsigned int	ioaddr;
 	int		bnknr;
+	int		handled = 0;
 
 	while (inb(brdp->iostatus) & ECH_INTRPEND) {
+		handled = 1;
 		for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
 			ioaddr = brdp->bnkstataddr[bnknr];
 			if (inb(ioaddr) & ECH_PNLINTRPEND) {
@@ -2076,6 +2068,7 @@ static void stl_echmcaintr(stlbrd_t *brdp)
 			}
 		}
 	}
+	return handled;
 }
 
 /*****************************************************************************/
@@ -2084,11 +2077,12 @@ static void stl_echmcaintr(stlbrd_t *brdp)
  *	Interrupt service routine for ECH-PCI board types.
  */
 
-static void stl_echpciintr(stlbrd_t *brdp)
+static int stl_echpciintr(stlbrd_t *brdp)
 {
 	stlpanel_t	*panelp;
 	unsigned int	ioaddr;
 	int		bnknr, recheck;
+	int		handled = 0;
 
 	while (1) {
 		recheck = 0;
@@ -2099,11 +2093,13 @@ static void stl_echpciintr(stlbrd_t *brdp)
 				panelp = brdp->bnk2panel[bnknr];
 				(* panelp->isr)(panelp, (ioaddr & 0xfffc));
 				recheck++;
+				handled = 1;
 			}
 		}
 		if (! recheck)
 			break;
 	}
+	return handled;
 }
 
 /*****************************************************************************/
@@ -2112,13 +2108,15 @@ static void stl_echpciintr(stlbrd_t *brdp)
  *	Interrupt service routine for ECH-8/64-PCI board types.
  */
 
-static void stl_echpci64intr(stlbrd_t *brdp)
+static int stl_echpci64intr(stlbrd_t *brdp)
 {
 	stlpanel_t	*panelp;
 	unsigned int	ioaddr;
 	int		bnknr;
+	int		handled = 0;
 
 	while (inb(brdp->ioctrl) & 0x1) {
+		handled = 1;
 		for (bnknr = 0; (bnknr < brdp->nrbnks); bnknr++) {
 			ioaddr = brdp->bnkstataddr[bnknr];
 			if (inb(ioaddr) & ECH_PNLINTRPEND) {
@@ -2127,6 +2125,8 @@ static void stl_echpci64intr(stlbrd_t *brdp)
 			}
 		}
 	}
+
+	return handled;
 }
 
 /*****************************************************************************/
@@ -2173,39 +2173,6 @@ static void stl_offintr(void *private)
 
 /*****************************************************************************/
 
-/*
- *	Map in interrupt vector to this driver. Check that we don't
- *	already have this vector mapped, we might be sharing this
- *	interrupt across multiple boards.
- */
-
-static int __init stl_mapirq(int irq, char *name)
-{
-	int	rc, i;
-
-#ifdef DEBUG
-	printk("stl_mapirq(irq=%d,name=%s)\n", irq, name);
-#endif
-
-	rc = 0;
-	for (i = 0; (i < stl_numintrs); i++) {
-		if (stl_gotintrs[i] == irq)
-			break;
-	}
-	if (i >= stl_numintrs) {
-		if (request_irq(irq, stl_intr, SA_SHIRQ, name, NULL) != 0) {
-			printk("STALLION: failed to register interrupt "
-				"routine for %s irq=%d\n", name, irq);
-			rc = -ENODEV;
-		} else {
-			stl_gotintrs[stl_numintrs++] = irq;
-		}
-	}
-	return(rc);
-}
-
-/*****************************************************************************/
-
 /*
  *	Initialize all the ports on a panel.
  */
@@ -2389,7 +2356,13 @@ static inline int stl_initeio(stlbrd_t *brdp)
 	brdp->nrpanels = 1;
 	brdp->state |= BRD_FOUND;
 	brdp->hwid = status;
-	rc = stl_mapirq(brdp->irq, name);
+	if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+		printk("STALLION: failed to register interrupt "
+		    "routine for %s irq=%d\n", name, brdp->irq);
+		rc = -ENODEV;
+	} else {
+		rc = 0;
+	}
 	return(rc);
 }
 
@@ -2594,7 +2567,14 @@ static inline int stl_initech(stlbrd_t *brdp)
 		outb((brdp->ioctrlval | ECH_BRDDISABLE), brdp->ioctrl);
 
 	brdp->state |= BRD_FOUND;
-	i = stl_mapirq(brdp->irq, name);
+	if (request_irq(brdp->irq, stl_intr, SA_SHIRQ, name, brdp) != 0) {
+		printk("STALLION: failed to register interrupt "
+		    "routine for %s irq=%d\n", name, brdp->irq);
+		i = -ENODEV;
+	} else {
+		i = 0;
+	}
+
 	return(i);
 }
 

drivers/scsi/Kconfig

@@ -273,8 +273,8 @@ config SCSI_ACARD
 	tristate "ACARD SCSI support"
 	depends on PCI && SCSI
 	help
-	  This driver supports the ACARD 870U/W SCSI host adapter.
-
+	  This driver supports the ACARD SCSI host adapter.
+	  Support Chip <ATP870 ATP876 ATP880 ATP885>
 	  To compile this driver as a module, choose M here: the
 	  module will be called atp870u.
 

drivers/scsi/atp870u.h

@@ -2,50 +2,64 @@
 #define _ATP870U_H
 
 #include <linux/types.h>
+#include <linux/kdev_t.h>
 
 /* I/O Port */
 
-#define MAX_CDB		12
-#define MAX_SENSE	14
-#define qcnt		32
-#define ATP870U_SCATTER 128
-#define ATP870U_CMDLUN 	1
-
-struct atp_unit {
-	unsigned long ioport;
-	unsigned long pciport;
-	unsigned char last_cmd;
-	unsigned char in_snd;
-	unsigned char in_int;
-	unsigned char quhdu;
-	unsigned char quendu;
+#define MAX_CDB 	12
+#define MAX_SENSE 	14
+#define qcnt	       	32
+#define ATP870U_SCATTER 	128
+#define ATP870U_CMDLUN  	1
+
+#define MAX_ADAPTER	8
+#define MAX_SCSI_ID	16
+#define ATP870U_MAX_SECTORS 128
+
+#define ATP885_DEVID 0x808A
+#define ATP880_DEVID1 0x8080
+#define ATP880_DEVID2 0x8081
+
+//#define ED_DBGP
+
+struct atp_unit
+{
+	unsigned long baseport;
+	unsigned long ioport[2];
+	unsigned long pciport[2];
+	unsigned long irq;
+	unsigned char last_cmd[2];
+	unsigned char in_snd[2];
+	unsigned char in_int[2];
+	unsigned char quhd[2];
+	unsigned char quend[2];
+	unsigned char global_map[2];
+	unsigned char chip_ver;
 	unsigned char scam_on;
-	unsigned char global_map;
-	unsigned char chip_veru;
-	unsigned char host_idu;
-	volatile int working;
-	unsigned short wide_idu;
-	unsigned short active_idu;
-	unsigned short ultra_map;
-	unsigned short async;
-	unsigned short deviceid;
-	unsigned char ata_cdbu[16];
-	unsigned char sp[16];
-	struct scsi_cmnd *querequ[qcnt];
-	struct atp_id {
-		unsigned char dirctu;
-		unsigned char devspu;
-		unsigned char devtypeu;
-		unsigned long prdaddru;
-		unsigned long tran_lenu;
-		unsigned long last_lenu;
-		unsigned char *prd_posu;
-		unsigned char *prd_tableu;
-		dma_addr_t prd_phys;
+	unsigned char host_id[2];
+	unsigned int working[2];
+	unsigned short wide_id[2];
+	unsigned short active_id[2];
+	unsigned short ultra_map[2];
+	unsigned short async[2];
+	unsigned short dev_id;
+	unsigned char sp[2][16];
+	unsigned char r1f[2][16];		
+	struct scsi_cmnd *quereq[2][qcnt];
+	struct atp_id
+	{
+		unsigned char dirct;
+		unsigned char devsp;
+		unsigned char devtype;
+		unsigned long tran_len;
+		unsigned long last_len;
+		unsigned char *prd_pos;
+		unsigned char *prd_table;
+		dma_addr_t prdaddr;
 		struct scsi_cmnd *curr_req;
-	} id[16];
-	struct Scsi_Host *host;
-	struct pci_dev *pdev;
+	} id[2][16];
+    	struct Scsi_Host *host;
+    	struct pci_dev *pdev;
 	unsigned int unit;
 };
 

drivers/usb/media/Kconfig

@@ -175,3 +175,39 @@ config USB_W9968CF
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called w9968cf.
+
+config USB_PWC
+	tristate "USB Philips Cameras"
+	depends on USB && VIDEO_DEV
+	---help---
+	  Say Y or M here if you want to use one of these Philips & OEM
+          webcams:
+           * Philips PCA645, PCA646
+           * Philips PCVC675, PCVC680, PCVC690
+           * Philips PCVC720/40, PCVC730, PCVC740, PCVC750
+	   * Askey VC010
+	   * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' 
+             and 'Orbit'/'Sphere'
+           * Samsung MPC-C10, MPC-C30
+	   * Creative Webcam 5, Pro Ex
+	   * SOTEC Afina Eye
+	   * Visionite VCS-UC300, VCS-UM100
+	   
+	  The PCA635, PCVC665 and PCVC720/20 are not supported by this driver
+	  and never will be, but the 665 and 720/20 are supported by other 
+	  drivers.
+
+	  See <file:Documentation/usb/philips.txt> for more information and
+	  installation instructions.
+
+	  The built-in microphone is enabled by selecting USB Audio support.
+
+	  This driver uses the Video For Linux API. You must say Y or M to
+	  "Video For Linux" (under Character Devices) to use this driver.
+	  Information on this API and pointers to "v4l" programs may be found
+	  at <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pwc.
+
+

drivers/usb/media/Makefile

@@ -14,3 +14,4 @@ obj-$(CONFIG_USB_SN9C102)	+= sn9c102.o
 obj-$(CONFIG_USB_STV680)	+= stv680.o
 obj-$(CONFIG_USB_VICAM)		+= vicam.o usbvideo.o
 obj-$(CONFIG_USB_W9968CF)	+= w9968cf.o
+obj-$(CONFIG_USB_PWC)           += pwc/

drivers/usb/media/pwc/ChangeLog

+9.0.2
+
+* Adding #ifdef to compile PWC before and after 2.6.5
+
+9.0.1
+
+9.0
+
+
+8.12
+
+* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere.
+
+8.11.1
+
+* Fix for PCVC720/40, would not be able to set videomode
+* Fix for Samsung MPC models, appearantly they are based on a newer chipset
+
+8.11
+
+* 20 dev_hints (per request)
+* Hot unplugging should be better, no more dangling pointers or memory leaks
+* Added reserved Logitech webcam IDs
+* Device now remembers size & fps between close()/open()
+* Removed palette stuff altogether
+
+8.10.1
+
+* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro
+
+8.10
+
+* Fixed ID for QuickCam Notebook pro
+* Added GREALSIZE ioctl() call
+* Fixed bug in case PWCX was not loaded and invalid size was set
+
+8.9
+
+* Merging with kernel 2.5.49
+* Adding IDs for QuickCam Zoom & QuickCam Notebook
+
+8.8
+
+* Fixing 'leds' parameter
+* Adding IDs for Logitech QuickCam Pro 4000
+* Making URB init/cleanup a little nicer
+
+8.7
+
+* Incorporating changes in ioctl() parameter passing
+* Also changes to URB mechanism
+
+8.6
+
+* Added ID's for Visionite VCS UM100 and UC300
+* Removed YUV420-interlaced palette altogether (was confusing)
+* Removed MIRROR stuff as it didn't work anyway
+* Fixed a problem with the 'leds' parameter (wouldn't blink)
+* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s,
+  CONTOUR, BACKLIGHT, FLICKER, DYNNOISE.
+* VIDIOCGCAP.name now contains real camera model name instead of
+  'Philips xxx webcam'
+* Added PROBE ioctl (see previous point & API doc)
+
+8.5
+
+* Adding IDs for Creative Labs Webcam 5
+* Adding IDs for SOTEC CMS-001 webcam
+* Solving possible hang in VIDIOCSYNC when unplugging the cam 
+* Forgot to return structure in VIDIOCPWCGAWB, oops
+* Time interval for the LEDs are now in milliseconds
+
+8.4
+
+* Fixing power_save option for Vesta range
+* Handling new error codes in ISOC callback
+* Adding dev_hint module parameter, to specify /dev/videoX device nodes
+
+8.3
+
+* Adding Samsung C10 and C30 cameras
+* Removing palette module parameter
+* Fixed typo in ID of QuickCam 3000 Pro
+* Adding LED settings (blinking while in use) for ToUCam cameras.
+* Turns LED off when camera is not in use.
+
+8.2
+
+* Making module more silent when trace = 0 
+* Adding QuickCam 3000 Pro IDs
+* Chrominance control for the Vesta cameras
+* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM
+* Included Oliver Neukem's lock_kernel() patch
+* Allocates less memory for image buffers
+* Adds ioctl()s for the whitebalancing
+
+8.1
+
+* Adding support for 750
+* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls
+
+8.0
+* 'damage control' after inclusion in 2.4.5.
+* Changed wait-queue mechanism in read/mmap/poll according to the book.
+* Included YUV420P palette.
+* Changed interface to decompressor module.
+* Cleaned up pwc structure a bit.
+
+7.0
+
+* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned.
+* There is now a clear error message when an image size is selected that
+  is only supported using the decompressor, and the decompressor isn't
+  loaded.
+* When the decompressor wasn't loaded, selecting large image size
+  would create skewed or double images.
+
+6.3
+
+* Introduced spinlocks for the buffer pointer manipulation; a number of
+  reports seem to suggest the down()/up() semaphores were the cause of
+  lockups, since they are not suitable for interrupt/user locking.
+* Separated decompressor and core code into 2 modules.
+
+6.2
+
+* Non-integral image sizes are now padded with gray or black.
+* Added SHUTTERSPEED ioctl().
+* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error,
+  even though the call succeeded.
+* Added hotplug support for 2.4.*.
+* Memory: the 645/646 uses less memory now.
+
+6.1
+
+* VIDIOCSPICT returns -EINVAL with invalid palettes.
+* Added saturation control.
+* Split decompressors from rest.
+* Fixed bug that would reset the framerate to the default framerate if 
+  the rate field was set to 0 (which is not what I intended, nl. do not 
+  change the framerate!).
+* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately.
+* Workaround for a bug in the 730 sensor.

drivers/usb/media/pwc/Makefile

+ifneq ($(KERNELRELEASE),)
+
+pwc-objs	:= pwc-if.o pwc-misc.o pwc-ctrl.o pwc-uncompress.o pwc-dec1.o pwc-dec23.o pwc-kiara.o pwc-timon.o
+
+obj-$(CONFIG_USB_PWC) += pwc.o
+
+else
+
+KDIR := /lib/modules/$(shell uname -r)/build
+PWD := $(shell pwd)
+
+default:
+	$(MAKE) -C $(KDIR) SUBDIRS=$(PWD) modules
+
+endif
+
+clean:
+	rm -f *.[oas] .*.flags *.ko .*.cmd .*.d .*.tmp *.mod.c 
+	rm -rf .tmp_versions
+

drivers/usb/media/pwc/pwc-dec1.c

+/* Linux driver for Philips webcam
+   Decompression for chipset version 1
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+
+#include "pwc-dec1.h"
+
+
+void pwc_dec1_init(int type, int release, void *buffer, void *table)
+{
+
+}
+
+void pwc_dec1_exit(void)
+{
+
+
+
+}
+

drivers/usb/media/pwc/pwc-dec1.h

+/* Linux driver for Philips webcam
+   (C) 2004      Luc Saillard (luc@saillard.org)
+
+   NOTE: this version of pwc is an unofficial (modified) release of pwc & pcwx
+   driver and thus may have bugs that are not present in the original version.
+   Please send bug reports and support requests to <luc@saillard.org>.
+   The decompression routines have been implemented by reverse-engineering the
+   Nemosoft binary pwcx module. Caveat emptor.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+
+
+#ifndef PWC_DEC1_H
+#define PWC_DEC1_H
+
+void pwc_dec1_init(int type, int release, void *buffer, void *private_data);
+void pwc_dec1_exit(void);
+
+#endif
+
+
+

include/linux/stallion.h

@@ -126,7 +126,7 @@ typedef struct stlbrd {
 	int		nrbnks;
 	int		irq;
 	int		irqtype;
-	void		(*isr)(struct stlbrd *brdp);
+	int		(*isr)(struct stlbrd *brdp);
 	unsigned int	ioaddr1;
 	unsigned int	ioaddr2;
 	unsigned int	iosize1;