Merge tag 'nand/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

MTD core:
* Handle possible -EPROBE_DEFER from parse_mtd_partitions()

NAND core:
* Fix error handling in nand_prog_page_op() (x2)
* Add a helper to retrieve the number of ECC bytes per step
* Add a helper to retrieve the number of ECC steps
* Let ECC engines advertize the exact number of steps
* ECC Hamming:
  - Populate the public nsteps field
  - Use the public nsteps field
* ECC BCH:
  - Populate the public nsteps field
  - Use the public nsteps field

Raw NAND core:
* Add support for secure regions in NAND memory
* Try not to use the ECC private structures
* Remove duplicate include in rawnand.h
* BBT:
  - Skip bad blocks when searching for the BBT in NAND

Raw NAND controller drivers:
* Qcom:
  - Convert bindings to YAML
  - Use dma_mapping_error() for error check
  - Add missing nand_cleanup() in error path
  - Return actual error code instead of -ENODEV
  - Update last code word register
  - Add helper to configure location register
  - Rename parameter name in macro
  - Add helper to check last code word
  - Convert nandc to chip in Read/Write helper
  - Update register macro name for 0x2c offset
* GPMI:
  - Fix a double free in gpmi_nand_init
* Rockchip:
  - Use flexible-array member instead of zero-length array
* Atmel:
  - Update ecc_stats.corrected counter
* MXC:
  - Remove unneeded of_match_ptr()
* R852:
  - replace spin_lock_irqsave by spin_lock in hard IRQ
* Brcmnand:
  - Move to polling in pio mode on oops write
  - Read/write oob during EDU transfer
  - Fix OOB R/W with Hamming ECC
* FSMC:
  - Fix error code in fsmc_nand_probe()
* OMAP:
  - Use ECC information from the generic structures

SPI-NAND core:
* Add missing MODULE_DEVICE_TABLE()

SPI-NAND drivers:
* gigadevice: Support GD5F1GQ5UExxG

Documentation/devicetree/bindings/mtd/nand-controller.yaml

@@ -143,6 +143,13 @@ patternProperties:
           Ready/Busy pins. Active state refers to the NAND ready state and
           should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
 
+      secure-regions:
+        $ref: /schemas/types.yaml#/definitions/uint64-matrix
+        description:
+          Regions in the NAND chip which are protected using a secure element
+          like Trustzone. This property contains the start address and size of
+          the secure regions present.
+
     required:
       - reg
 

Documentation/devicetree/bindings/mtd/qcom,nandc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/qcom,nandc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm NAND controller
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq806x-nand
+      - qcom,ipq4019-nand
+      - qcom,ipq6018-nand
+      - qcom,ipq8074-nand
+      - qcom,sdx55-nand
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: Core Clock
+      - description: Always ON Clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: aon
+
+  "#address-cells": true
+  "#size-cells": true
+
+patternProperties:
+  "^nand@[a-f0-9]$":
+    type: object
+    properties:
+      nand-bus-width:
+        const: 8
+
+      nand-ecc-strength:
+        enum: [1, 4, 8]
+
+      nand-ecc-step-size:
+        enum:
+          - 512
+
+allOf:
+  - $ref: "nand-controller.yaml#"
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,ipq806x-nand
+    then:
+      properties:
+        dmas:
+          items:
+            - description: rxtx DMA channel
+
+        dma-names:
+          items:
+            - const: rxtx
+
+        qcom,cmd-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM command type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+        qcom,data-crci:
+          $ref: /schemas/types.yaml#/definitions/uint32
+          description:
+            Must contain the ADM data type CRCI block instance number
+            specified for the NAND controller on the given platform
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq4019-nand
+              - qcom,ipq6018-nand
+              - qcom,ipq8074-nand
+              - qcom,sdx55-nand
+
+    then:
+      properties:
+        dmas:
+          items:
+            - description: tx DMA channel
+            - description: rx DMA channel
+            - description: cmd DMA channel
+
+        dma-names:
+          items:
+            - const: tx
+            - const: rx
+            - const: cmd
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+    nand-controller@1ac00000 {
+      compatible = "qcom,ipq806x-nand";
+      reg = <0x1ac00000 0x800>;
+
+      clocks = <&gcc EBI2_CLK>,
+               <&gcc EBI2_AON_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&adm_dma 3>;
+      dma-names = "rxtx";
+      qcom,cmd-crci = <15>;
+      qcom,data-crci = <3>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
+    nand-controller@79b0000 {
+      compatible = "qcom,ipq4019-nand";
+      reg = <0x79b0000 0x1000>;
+
+      clocks = <&gcc GCC_QPIC_CLK>,
+               <&gcc GCC_QPIC_AHB_CLK>;
+      clock-names = "core", "aon";
+
+      dmas = <&qpicbam 0>,
+             <&qpicbam 1>,
+             <&qpicbam 2>;
+      dma-names = "tx", "rx", "cmd";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      nand@0 {
+        reg = <0>;
+        nand-ecc-strength = <4>;
+        nand-bus-width = <8>;
+
+        partitions {
+          compatible = "fixed-partitions";
+          #address-cells = <1>;
+          #size-cells = <1>;
+
+          partition@0 {
+            label = "boot-nand";
+            reg = <0 0x58a0000>;
+          };
+
+          partition@58a0000 {
+            label = "fs-nand";
+            reg = <0x58a0000 0x4000000>;
+          };
+        };
+      };
+    };
+
+...

Documentation/devicetree/bindings/mtd/qcom_nandc.txt

-* Qualcomm NAND controller
-
-Required properties:
-- compatible:		must be one of the following:
-    * "qcom,ipq806x-nand" - for EBI2 NAND controller being used in IPQ806x
-			    SoC and it uses ADM DMA
-    * "qcom,ipq4019-nand" - for QPIC NAND controller v1.4.0 being used in
-                            IPQ4019 SoC and it uses BAM DMA
-    * "qcom,ipq6018-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ6018 SoC and it uses BAM DMA
-    * "qcom,ipq8074-nand" - for QPIC NAND controller v1.5.0 being used in
-                            IPQ8074 SoC and it uses BAM DMA
-    * "qcom,sdx55-nand"   - for QPIC NAND controller v2.0.0 being used in
-                            SDX55 SoC and it uses BAM DMA
-
-- reg:			MMIO address range
-- clocks:		must contain core clock and always on clock
-- clock-names:		must contain "core" for the core clock and "aon" for the
-			always on clock
-
-EBI2 specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the ADM DMA
-			controller node and the channel number to be used for
-			NAND. Refer to dma.txt and qcom_adm.txt for more details
-- dma-names:		must be "rxtx"
-- qcom,cmd-crci:	must contain the ADM command type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-- qcom,data-crci:	must contain the ADM data type CRCI block instance
-			number specified for the NAND controller on the given
-			platform
-
-QPIC specific properties:
-- dmas:			DMA specifier, consisting of a phandle to the BAM DMA
-			and the channel number to be used for NAND. Refer to
-			dma.txt, qcom_bam_dma.txt for more details
-- dma-names:		must contain all 3 channel names : "tx", "rx", "cmd"
-- #address-cells:	<1> - subnodes give the chip-select number
-- #size-cells:		<0>
-
-* NAND chip-select
-
-Each controller may contain one or more subnodes to represent enabled
-chip-selects which (may) contain NAND flash chips. Their properties are as
-follows.
-
-Required properties:
-- reg:			a single integer representing the chip-select
-			number (e.g., 0, 1, 2, etc.)
-- #address-cells:	see partition.txt
-- #size-cells:		see partition.txt
-
-Optional properties:
-- nand-bus-width:	see nand-controller.yaml
-- nand-ecc-strength:	see nand-controller.yaml. If not specified, then ECC strength will
-			be used according to chip requirement and available
-			OOB size.
-
-Each nandcs device node may optionally contain a 'partitions' sub-node, which
-further contains sub-nodes describing the flash partition mapping. See
-partition.txt for more detail.
-
-Example:
-
-nand-controller@1ac00000 {
-	compatible = "qcom,ipq806x-nand";
-	reg = <0x1ac00000 0x800>;
-
-	clocks = <&gcc EBI2_CLK>,
-		 <&gcc EBI2_AON_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&adm_dma 3>;
-	dma-names = "rxtx";
-	qcom,cmd-crci = <15>;
-	qcom,data-crci = <3>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};
-
-nand-controller@79b0000 {
-	compatible = "qcom,ipq4019-nand";
-	reg = <0x79b0000 0x1000>;
-
-	clocks = <&gcc GCC_QPIC_CLK>,
-		<&gcc GCC_QPIC_AHB_CLK>;
-	clock-names = "core", "aon";
-
-	dmas = <&qpicbam 0>,
-		<&qpicbam 1>,
-		<&qpicbam 2>;
-	dma-names = "tx", "rx", "cmd";
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	nand@0 {
-		reg = <0>;
-		nand-ecc-strength = <4>;
-		nand-bus-width = <8>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "boot-nand";
-				reg = <0 0x58a0000>;
-			};
-
-			partition@58a0000 {
-				label = "fs-nand";
-				reg = <0x58a0000 0x4000000>;
-			};
-		};
-	};
-};

drivers/mtd/mtdcore.c

@@ -822,6 +822,9 @@ int mtd_device_parse_register(struct mtd_info *mtd, const char * const *types,
 
 	/* Prefer parsed partitions over driver-provided fallback */
 	ret = parse_mtd_partitions(mtd, types, parser_data);
+	if (ret == -EPROBE_DEFER)
+		goto out;
+
 	if (ret > 0)
 		ret = 0;
 	else if (nr_parts)

drivers/mtd/nand/ecc-sw-bch.c

@@ -236,7 +236,6 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 		goto free_engine_conf;
 
 	engine_conf->code_size = code_size;
-	engine_conf->nsteps = nsteps;
 	engine_conf->calc_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	engine_conf->code_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	if (!engine_conf->calc_buf || !engine_conf->code_buf) {
@@ -245,6 +244,7 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 	}
 
 	nand->ecc.ctx.priv = engine_conf;
+	nand->ecc.ctx.nsteps = nsteps;
 	nand->ecc.ctx.total = nsteps * code_size;
 
 	ret = nand_ecc_sw_bch_init(nand);
@@ -253,7 +253,7 @@ int nand_ecc_sw_bch_init_ctx(struct nand_device *nand)
 
 	/* Verify the layout validity */
 	if (mtd_ooblayout_count_eccbytes(mtd) !=
-	    engine_conf->nsteps * engine_conf->code_size) {
+	    nand->ecc.ctx.nsteps * engine_conf->code_size) {
 		pr_err("Invalid ECC layout\n");
 		ret = -EINVAL;
 		goto cleanup_bch_ctx;
@@ -295,7 +295,7 @@ static int nand_ecc_sw_bch_prepare_io_req(struct nand_device *nand,
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	int total = nand->ecc.ctx.total;
 	u8 *ecccalc = engine_conf->calc_buf;
 	const u8 *data;
@@ -333,7 +333,7 @@ static int nand_ecc_sw_bch_finish_io_req(struct nand_device *nand,
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int total = nand->ecc.ctx.total;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	u8 *ecccalc = engine_conf->calc_buf;
 	u8 *ecccode = engine_conf->code_buf;
 	unsigned int max_bitflips = 0;
@@ -365,7 +365,7 @@ static int nand_ecc_sw_bch_finish_io_req(struct nand_device *nand,
 		nand_ecc_sw_bch_calculate(nand, data, &ecccalc[i]);
 
 	/* Finish a page read: compare and correct */
-	for (eccsteps = engine_conf->nsteps, i = 0, data = req->databuf.in;
+	for (eccsteps = nand->ecc.ctx.nsteps, i = 0, data = req->databuf.in;
 	     eccsteps;
 	     eccsteps--, i += eccbytes, data += eccsize) {
 		int stat =  nand_ecc_sw_bch_correct(nand, data,

drivers/mtd/nand/ecc-sw-hamming.c

@@ -504,7 +504,6 @@ int nand_ecc_sw_hamming_init_ctx(struct nand_device *nand)
 		goto free_engine_conf;
 
 	engine_conf->code_size = 3;
-	engine_conf->nsteps = mtd->writesize / conf->step_size;
 	engine_conf->calc_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	engine_conf->code_buf = kzalloc(mtd->oobsize, GFP_KERNEL);
 	if (!engine_conf->calc_buf || !engine_conf->code_buf) {
@@ -513,7 +512,8 @@ int nand_ecc_sw_hamming_init_ctx(struct nand_device *nand)
 	}
 
 	nand->ecc.ctx.priv = engine_conf;
-	nand->ecc.ctx.total = engine_conf->nsteps * engine_conf->code_size;
+	nand->ecc.ctx.nsteps = mtd->writesize / conf->step_size;
+	nand->ecc.ctx.total = nand->ecc.ctx.nsteps * engine_conf->code_size;
 
 	return 0;
 
@@ -548,7 +548,7 @@ static int nand_ecc_sw_hamming_prepare_io_req(struct nand_device *nand,
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	int total = nand->ecc.ctx.total;
 	u8 *ecccalc = engine_conf->calc_buf;
 	const u8 *data;
@@ -586,7 +586,7 @@ static int nand_ecc_sw_hamming_finish_io_req(struct nand_device *nand,
 	int eccsize = nand->ecc.ctx.conf.step_size;
 	int total = nand->ecc.ctx.total;
 	int eccbytes = engine_conf->code_size;
-	int eccsteps = engine_conf->nsteps;
+	int eccsteps = nand->ecc.ctx.nsteps;
 	u8 *ecccalc = engine_conf->calc_buf;
 	u8 *ecccode = engine_conf->code_buf;
 	unsigned int max_bitflips = 0;
@@ -618,7 +618,7 @@ static int nand_ecc_sw_hamming_finish_io_req(struct nand_device *nand,
 		nand_ecc_sw_hamming_calculate(nand, data, &ecccalc[i]);
 
 	/* Finish a page read: compare and correct */
-	for (eccsteps = engine_conf->nsteps, i = 0, data = req->databuf.in;
+	for (eccsteps = nand->ecc.ctx.nsteps, i = 0, data = req->databuf.in;
 	     eccsteps;
 	     eccsteps--, i += eccbytes, data += eccsize) {
 		int stat =  nand_ecc_sw_hamming_correct(nand, data,

drivers/mtd/nand/raw/atmel/nand-controller.c

@@ -883,10 +883,12 @@ static int atmel_nand_pmecc_correct_data(struct nand_chip *chip, void *buf,
 							  NULL, 0,
 							  chip->ecc.strength);
 
-		if (ret >= 0)
+		if (ret >= 0) {
+			mtd->ecc_stats.corrected += ret;
 			max_bitflips = max(ret, max_bitflips);
-		else
+		} else {
 			mtd->ecc_stats.failed++;
+		}
 
 		databuf += chip->ecc.size;
 		eccbuf += chip->ecc.bytes;

drivers/mtd/nand/raw/brcmnand/brcmnand.c

@@ -242,6 +242,9 @@ struct brcmnand_controller {
 	u32                     edu_ext_addr;
 	u32                     edu_cmd;
 	u32                     edu_config;
+	int			sas; /* spare area size, per flash cache */
+	int			sector_size_1k;
+	u8			*oob;
 
 	/* flash_dma reg */
 	const u16		*flash_dma_offsets;
@@ -249,7 +252,7 @@ struct brcmnand_controller {
 	dma_addr_t		dma_pa;
 
 	int (*dma_trans)(struct brcmnand_host *host, u64 addr, u32 *buf,
-			 u32 len, u8 dma_cmd);
+			 u8 *oob, u32 len, u8 dma_cmd);
 
 	/* in-memory cache of the FLASH_CACHE, used only for some commands */
 	u8			flash_cache[FC_BYTES];
@@ -1479,6 +1482,23 @@ static irqreturn_t brcmnand_edu_irq(int irq, void *data)
 		edu_writel(ctrl, EDU_EXT_ADDR, ctrl->edu_ext_addr);
 		edu_readl(ctrl, EDU_EXT_ADDR);
 
+		if (ctrl->oob) {
+			if (ctrl->edu_cmd == EDU_CMD_READ) {
+				ctrl->oob += read_oob_from_regs(ctrl,
+							ctrl->edu_count + 1,
+							ctrl->oob, ctrl->sas,
+							ctrl->sector_size_1k);
+			} else {
+				brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS,
+						   ctrl->edu_ext_addr);
+				brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
+				ctrl->oob += write_oob_to_regs(ctrl,
+							       ctrl->edu_count,
+							       ctrl->oob, ctrl->sas,
+							       ctrl->sector_size_1k);
+			}
+		}
+
 		mb(); /* flush previous writes */
 		edu_writel(ctrl, EDU_CMD, ctrl->edu_cmd);
 		edu_readl(ctrl, EDU_CMD);
@@ -1850,9 +1870,10 @@ static void brcmnand_write_buf(struct nand_chip *chip, const uint8_t *buf,
  *  Kick EDU engine
  */
 static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
-			      u32 len, u8 cmd)
+			      u8 *oob, u32 len, u8 cmd)
 {
 	struct brcmnand_controller *ctrl = host->ctrl;
+	struct brcmnand_cfg *cfg = &host->hwcfg;
 	unsigned long timeo = msecs_to_jiffies(200);
 	int ret = 0;
 	int dir = (cmd == CMD_PAGE_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
@@ -1860,6 +1881,9 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 	unsigned int trans = len >> FC_SHIFT;
 	dma_addr_t pa;
 
+	dev_dbg(ctrl->dev, "EDU %s %p:%p\n", ((edu_cmd == EDU_CMD_READ) ?
+					      "read" : "write"), buf, oob);
+
 	pa = dma_map_single(ctrl->dev, buf, len, dir);
 	if (dma_mapping_error(ctrl->dev, pa)) {
 		dev_err(ctrl->dev, "unable to map buffer for EDU DMA\n");
@@ -1871,6 +1895,8 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 	ctrl->edu_ext_addr = addr;
 	ctrl->edu_cmd = edu_cmd;
 	ctrl->edu_count = trans;
+	ctrl->sas = cfg->spare_area_size;
+	ctrl->oob = oob;
 
 	edu_writel(ctrl, EDU_DRAM_ADDR, (u32)ctrl->edu_dram_addr);
 	edu_readl(ctrl,  EDU_DRAM_ADDR);
@@ -1879,6 +1905,16 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 	edu_writel(ctrl, EDU_LENGTH, FC_BYTES);
 	edu_readl(ctrl, EDU_LENGTH);
 
+	if (ctrl->oob && (ctrl->edu_cmd == EDU_CMD_WRITE)) {
+		brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS,
+				   ctrl->edu_ext_addr);
+		brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
+		ctrl->oob += write_oob_to_regs(ctrl,
+					       1,
+					       ctrl->oob, ctrl->sas,
+					       ctrl->sector_size_1k);
+	}
+
 	/* Start edu engine */
 	mb(); /* flush previous writes */
 	edu_writel(ctrl, EDU_CMD, ctrl->edu_cmd);
@@ -1893,6 +1929,14 @@ static int brcmnand_edu_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
 
 	dma_unmap_single(ctrl->dev, pa, len, dir);
 
+	/* read last subpage oob */
+	if (ctrl->oob && (ctrl->edu_cmd == EDU_CMD_READ)) {
+		ctrl->oob += read_oob_from_regs(ctrl,
+						1,
+						ctrl->oob, ctrl->sas,
+						ctrl->sector_size_1k);
+	}
+
 	/* for program page check NAND status */
 	if (((brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS) &
 	      INTFC_FLASH_STATUS) & NAND_STATUS_FAIL) &&
@@ -2002,7 +2046,7 @@ static void brcmnand_dma_run(struct brcmnand_host *host, dma_addr_t desc)
 }
 
 static int brcmnand_dma_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
-			      u32 len, u8 dma_cmd)
+			      u8 *oob, u32 len, u8 dma_cmd)
 {
 	struct brcmnand_controller *ctrl = host->ctrl;
 	dma_addr_t buf_pa;
@@ -2147,8 +2191,9 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
 try_dmaread:
 	brcmnand_clear_ecc_addr(ctrl);
 
-	if (ctrl->dma_trans && !oob && flash_dma_buf_ok(buf)) {
-		err = ctrl->dma_trans(host, addr, buf,
+	if (ctrl->dma_trans && (has_edu(ctrl) || !oob) &&
+	    flash_dma_buf_ok(buf)) {
+		err = ctrl->dma_trans(host, addr, buf, oob,
 				      trans * FC_BYTES,
 				      CMD_PAGE_READ);
 
@@ -2296,8 +2341,12 @@ static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip,
 	for (i = 0; i < ctrl->max_oob; i += 4)
 		oob_reg_write(ctrl, i, 0xffffffff);
 
-	if (use_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
-		if (ctrl->dma_trans(host, addr, (u32 *)buf, mtd->writesize,
+	if (mtd->oops_panic_write)
+		/* switch to interrupt polling and PIO mode */
+		disable_ctrl_irqs(ctrl);
+
+	if (use_dma(ctrl) && (has_edu(ctrl) || !oob) && flash_dma_buf_ok(buf)) {
+		if (ctrl->dma_trans(host, addr, (u32 *)buf, oob, mtd->writesize,
 				    CMD_PROGRAM_PAGE))
 
 			ret = -EIO;
@@ -2688,6 +2737,12 @@ static int brcmnand_attach_chip(struct nand_chip *chip)
 
 	ret = brcmstb_choose_ecc_layout(host);
 
+	/* If OOB is written with ECC enabled it will cause ECC errors */
+	if (is_hamming_ecc(host->ctrl, &host->hwcfg)) {
+		chip->ecc.write_oob = brcmnand_write_oob_raw;
+		chip->ecc.read_oob = brcmnand_read_oob_raw;
+	}
+
 	return ret;
 }
 

drivers/mtd/nand/raw/fsmc_nand.c

@@ -1078,11 +1078,13 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 		host->read_dma_chan = dma_request_channel(mask, filter, NULL);
 		if (!host->read_dma_chan) {
 			dev_err(&pdev->dev, "Unable to get read dma channel\n");
+			ret = -ENODEV;
 			goto disable_clk;
 		}
 		host->write_dma_chan = dma_request_channel(mask, filter, NULL);
 		if (!host->write_dma_chan) {
 			dev_err(&pdev->dev, "Unable to get write dma channel\n");
+			ret = -ENODEV;
 			goto release_dma_read_chan;
 		}
 	}

drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c

@@ -2449,7 +2449,7 @@ static int gpmi_nand_init(struct gpmi_nand_data *this)
 	this->bch_geometry.auxiliary_size = 128;
 	ret = gpmi_alloc_dma_buffer(this);
 	if (ret)
-		goto err_out;
+		return ret;
 
 	nand_controller_init(&this->base);
 	this->base.ops = &gpmi_nand_controller_ops;

drivers/mtd/nand/raw/mxc_nand.c

@@ -1849,7 +1849,7 @@ static int mxcnd_remove(struct platform_device *pdev)
 static struct platform_driver mxcnd_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
-		   .of_match_table = of_match_ptr(mxcnd_dt_ids),
+		   .of_match_table = mxcnd_dt_ids,
 	},
 	.probe = mxcnd_probe,
 	.remove = mxcnd_remove,

drivers/mtd/nand/raw/nand_base.c

@@ -278,11 +278,48 @@ static int nand_block_bad(struct nand_chip *chip, loff_t ofs)
 	return 0;
 }
 
+/**
+ * nand_region_is_secured() - Check if the region is secured
+ * @chip: NAND chip object
+ * @offset: Offset of the region to check
+ * @size: Size of the region to check
+ *
+ * Checks if the region is secured by comparing the offset and size with the
+ * list of secure regions obtained from DT. Returns true if the region is
+ * secured else false.
+ */
+static bool nand_region_is_secured(struct nand_chip *chip, loff_t offset, u64 size)
+{
+	int i;
+
+	/* Skip touching the secure regions if present */
+	for (i = 0; i < chip->nr_secure_regions; i++) {
+		const struct nand_secure_region *region = &chip->secure_regions[i];
+
+		if (offset + size <= region->offset ||
+		    offset >= region->offset + region->size)
+			continue;
+
+		pr_debug("%s: Region 0x%llx - 0x%llx is secured!",
+			 __func__, offset, offset + size);
+
+		return true;
+	}
+
+	return false;
+}
+
 static int nand_isbad_bbm(struct nand_chip *chip, loff_t ofs)
 {
+	struct mtd_info *mtd = nand_to_mtd(chip);
+
 	if (chip->options & NAND_NO_BBM_QUIRK)
 		return 0;
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, ofs, mtd->erasesize))
+		return -EIO;
+
 	if (chip->legacy.block_bad)
 		return chip->legacy.block_bad(chip, ofs);
 
@@ -397,6 +434,10 @@ static int nand_do_write_oob(struct nand_chip *chip, loff_t to,
 		return -EINVAL;
 	}
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, to, ops->ooblen))
+		return -EIO;
+
 	chipnr = (int)(to >> chip->chip_shift);
 
 	/*
@@ -1294,8 +1335,6 @@ static int nand_exec_prog_page_op(struct nand_chip *chip, unsigned int page,
 	};
 	struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
 	int naddrs = nand_fill_column_cycles(chip, addrs, offset_in_page);
-	int ret;
-	u8 status;
 
 	if (naddrs < 0)
 		return naddrs;
@@ -1335,15 +1374,7 @@ static int nand_exec_prog_page_op(struct nand_chip *chip, unsigned int page,
 		op.ninstrs--;
 	}
 
-	ret = nand_exec_op(chip, &op);
-	if (!prog || ret)
-		return ret;
-
-	ret = nand_status_op(chip, &status);
-	if (ret)
-		return ret;
-
-	return status;
+	return nand_exec_op(chip, &op);
 }
 
 /**
@@ -1449,7 +1480,8 @@ int nand_prog_page_op(struct nand_chip *chip, unsigned int page,
 		      unsigned int len)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
-	int status;
+	u8 status;
+	int ret;
 
 	if (!len || !buf)
 		return -EINVAL;
@@ -1458,14 +1490,24 @@ int nand_prog_page_op(struct nand_chip *chip, unsigned int page,
 		return -EINVAL;
 
 	if (nand_has_exec_op(chip)) {
-		status = nand_exec_prog_page_op(chip, page, offset_in_page, buf,
+		ret = nand_exec_prog_page_op(chip, page, offset_in_page, buf,
 						len, true);
+		if (ret)
+			return ret;
+
+		ret = nand_status_op(chip, &status);
+		if (ret)
+			return ret;
 	} else {
 		chip->legacy.cmdfunc(chip, NAND_CMD_SEQIN, offset_in_page,
 				     page);
 		chip->legacy.write_buf(chip, buf, len);
 		chip->legacy.cmdfunc(chip, NAND_CMD_PAGEPROG, -1, -1);
-		status = chip->legacy.waitfunc(chip);
+		ret = chip->legacy.waitfunc(chip);
+		if (ret < 0)
+			return ret;
+
+		status = ret;
 	}
 
 	if (status & NAND_STATUS_FAIL)
@@ -3127,6 +3169,10 @@ static int nand_do_read_ops(struct nand_chip *chip, loff_t from,
 	int retry_mode = 0;
 	bool ecc_fail = false;
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, from, readlen))
+		return -EIO;
+
 	chipnr = (int)(from >> chip->chip_shift);
 	nand_select_target(chip, chipnr);
 
@@ -3458,6 +3504,10 @@ static int nand_do_read_oob(struct nand_chip *chip, loff_t from,
 	pr_debug("%s: from = 0x%08Lx, len = %i\n",
 			__func__, (unsigned long long)from, readlen);
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, from, readlen))
+		return -EIO;
+
 	stats = mtd->ecc_stats;
 
 	len = mtd_oobavail(mtd, ops);
@@ -3979,6 +4029,10 @@ static int nand_do_write_ops(struct nand_chip *chip, loff_t to,
 		return -EINVAL;
 	}
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, to, writelen))
+		return -EIO;
+
 	column = to & (mtd->writesize - 1);
 
 	chipnr = (int)(to >> chip->chip_shift);
@@ -4180,6 +4234,10 @@ int nand_erase_nand(struct nand_chip *chip, struct erase_info *instr,
 	if (check_offs_len(chip, instr->addr, instr->len))
 		return -EINVAL;
 
+	/* Check if the region is secured */
+	if (nand_region_is_secured(chip, instr->addr, instr->len))
+		return -EIO;
+
 	/* Grab the lock and see if the device is available */
 	ret = nand_get_device(chip);
 	if (ret)
@@ -4995,6 +5053,31 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
 	return of_property_read_bool(np, "nand-on-flash-bbt");
 }
 
+static int of_get_nand_secure_regions(struct nand_chip *chip)
+{
+	struct device_node *dn = nand_get_flash_node(chip);
+	int nr_elem, i, j;
+
+	nr_elem = of_property_count_elems_of_size(dn, "secure-regions", sizeof(u64));
+	if (!nr_elem)
+		return 0;
+
+	chip->nr_secure_regions = nr_elem / 2;
+	chip->secure_regions = kcalloc(chip->nr_secure_regions, sizeof(*chip->secure_regions),
+				       GFP_KERNEL);
+	if (!chip->secure_regions)
+		return -ENOMEM;
+
+	for (i = 0, j = 0; i < chip->nr_secure_regions; i++, j += 2) {
+		of_property_read_u64_index(dn, "secure-regions", j,
+					   &chip->secure_regions[i].offset);
+		of_property_read_u64_index(dn, "secure-regions", j + 1,
+					   &chip->secure_regions[i].size);
+	}
+
+	return 0;
+}
+
 static int rawnand_dt_init(struct nand_chip *chip)
 {
 	struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
@@ -5162,8 +5245,8 @@ int rawnand_sw_hamming_init(struct nand_chip *chip)
 	chip->ecc.size = base->ecc.ctx.conf.step_size;
 	chip->ecc.strength = base->ecc.ctx.conf.strength;
 	chip->ecc.total = base->ecc.ctx.total;
-	chip->ecc.steps = engine_conf->nsteps;
-	chip->ecc.bytes = engine_conf->code_size;
+	chip->ecc.steps = nanddev_get_ecc_nsteps(base);
+	chip->ecc.bytes = base->ecc.ctx.total / nanddev_get_ecc_nsteps(base);
 
 	return 0;
 }
@@ -5201,7 +5284,7 @@ EXPORT_SYMBOL(rawnand_sw_hamming_cleanup);
 int rawnand_sw_bch_init(struct nand_chip *chip)
 {
 	struct nand_device *base = &chip->base;
-	struct nand_ecc_sw_bch_conf *engine_conf;
+	const struct nand_ecc_props *ecc_conf = nanddev_get_ecc_conf(base);
 	int ret;
 
 	base->ecc.user_conf.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
@@ -5213,13 +5296,11 @@ int rawnand_sw_bch_init(struct nand_chip *chip)
 	if (ret)
 		return ret;
 
-	engine_conf = base->ecc.ctx.priv;
-
-	chip->ecc.size = base->ecc.ctx.conf.step_size;
-	chip->ecc.strength = base->ecc.ctx.conf.strength;
+	chip->ecc.size = ecc_conf->step_size;
+	chip->ecc.strength = ecc_conf->strength;
 	chip->ecc.total = base->ecc.ctx.total;
-	chip->ecc.steps = engine_conf->nsteps;
-	chip->ecc.bytes = engine_conf->code_size;
+	chip->ecc.steps = nanddev_get_ecc_nsteps(base);
+	chip->ecc.bytes = base->ecc.ctx.total / nanddev_get_ecc_nsteps(base);
 
 	return 0;
 }
@@ -5953,6 +6034,16 @@ static int nand_scan_tail(struct nand_chip *chip)
 			goto err_free_interface_config;
 	}
 
+	/*
+	 * Look for secure regions in the NAND chip. These regions are supposed
+	 * to be protected by a secure element like Trustzone. So the read/write
+	 * accesses to these regions will be blocked in the runtime by this
+	 * driver.
+	 */
+	ret = of_get_nand_secure_regions(chip);
+	if (ret)
+		goto err_free_interface_config;
+
 	/* Check, if we should skip the bad block table scan */
 	if (chip->options & NAND_SKIP_BBTSCAN)
 		return 0;
@@ -5960,10 +6051,13 @@ static int nand_scan_tail(struct nand_chip *chip)
 	/* Build bad block table */
 	ret = nand_create_bbt(chip);
 	if (ret)
-		goto err_free_interface_config;
+		goto err_free_secure_regions;
 
 	return 0;
 
+err_free_secure_regions:
+	kfree(chip->secure_regions);
+
 err_free_interface_config:
 	kfree(chip->best_interface_config);
 
@@ -6051,6 +6145,9 @@ void nand_cleanup(struct nand_chip *chip)
 
 	nanddev_cleanup(&chip->base);
 
+	/* Free secure regions data */
+	kfree(chip->secure_regions);
+
 	/* Free bad block table memory */
 	kfree(chip->bbt);
 	kfree(chip->data_buf);

drivers/mtd/nand/raw/nand_bbt.c

@@ -525,6 +525,7 @@ static int search_bbt(struct nand_chip *this, uint8_t *buf,
 {
 	u64 targetsize = nanddev_target_size(&this->base);
 	struct mtd_info *mtd = nand_to_mtd(this);
+	struct nand_bbt_descr *bd = this->badblock_pattern;
 	int i, chips;
 	int startblock, block, dir;
 	int scanlen = mtd->writesize + mtd->oobsize;
@@ -560,6 +561,10 @@ static int search_bbt(struct nand_chip *this, uint8_t *buf,
 			int actblock = startblock + dir * block;
 			loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
 
+			/* Check if block is marked bad */
+			if (scan_block_fast(this, bd, offs, buf))
+				continue;
+
 			/* Read first page */
 			scan_read(this, buf, offs, mtd->writesize, td);
 			if (!check_pattern(buf, scanlen, mtd->writesize, td)) {

drivers/mtd/nand/raw/omap2.c

@@ -1868,18 +1868,19 @@ static int omap_sw_ooblayout_ecc(struct mtd_info *mtd, int section,
 				 struct mtd_oob_region *oobregion)
 {
 	struct nand_device *nand = mtd_to_nanddev(mtd);
-	const struct nand_ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
+	unsigned int nsteps = nanddev_get_ecc_nsteps(nand);
+	unsigned int ecc_bytes = nanddev_get_ecc_bytes_per_step(nand);
 	int off = BADBLOCK_MARKER_LENGTH;
 
-	if (section >= engine_conf->nsteps)
+	if (section >= nsteps)
 		return -ERANGE;
 
 	/*
 	 * When SW correction is employed, one OMAP specific marker byte is
 	 * reserved after each ECC step.
 	 */
-	oobregion->offset = off + (section * (engine_conf->code_size + 1));
-	oobregion->length = engine_conf->code_size;
+	oobregion->offset = off + (section * (ecc_bytes + 1));
+	oobregion->length = ecc_bytes;
 
 	return 0;
 }
@@ -1888,7 +1889,8 @@ static int omap_sw_ooblayout_free(struct mtd_info *mtd, int section,
 				  struct mtd_oob_region *oobregion)
 {
 	struct nand_device *nand = mtd_to_nanddev(mtd);
-	const struct nand_ecc_sw_bch_conf *engine_conf = nand->ecc.ctx.priv;
+	unsigned int nsteps = nanddev_get_ecc_nsteps(nand);
+	unsigned int ecc_bytes = nanddev_get_ecc_bytes_per_step(nand);
 	int off = BADBLOCK_MARKER_LENGTH;
 
 	if (section)
@@ -1898,7 +1900,7 @@ static int omap_sw_ooblayout_free(struct mtd_info *mtd, int section,
 	 * When SW correction is employed, one OMAP specific marker byte is
 	 * reserved after each ECC step.
 	 */
-	off += ((engine_conf->code_size + 1) * engine_conf->nsteps);
+	off += ((ecc_bytes + 1) * nsteps);
 	if (off >= mtd->oobsize)
 		return -ERANGE;
 

drivers/mtd/nand/raw/r852.c

@@ -724,10 +724,9 @@ static irqreturn_t r852_irq(int irq, void *data)
 	struct r852_device *dev = (struct r852_device *)data;
 
 	uint8_t card_status, dma_status;
-	unsigned long flags;
 	irqreturn_t ret = IRQ_NONE;
 
-	spin_lock_irqsave(&dev->irqlock, flags);
+	spin_lock(&dev->irqlock);
 
 	/* handle card detection interrupts first */
 	card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
@@ -813,7 +812,7 @@ static irqreturn_t r852_irq(int irq, void *data)
 		dbg("strange card status = %x", card_status);
 
 out:
-	spin_unlock_irqrestore(&dev->irqlock, flags);
+	spin_unlock(&dev->irqlock);
 	return ret;
 }
 

drivers/mtd/nand/raw/rockchip-nand-controller.c

@@ -159,7 +159,7 @@ struct rk_nfc_nand_chip {
 	u32 timing;
 
 	u8 nsels;
-	u8 sels[0];
+	u8 sels[];
 	/* Nothing after this field. */
 };
 

drivers/mtd/nand/spi/core.c

@@ -1263,12 +1263,14 @@ static const struct spi_device_id spinand_ids[] = {
 	{ .name = "spi-nand" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(spi, spinand_ids);
 
 #ifdef CONFIG_OF
 static const struct of_device_id spinand_of_ids[] = {
 	{ .compatible = "spi-nand" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, spinand_of_ids);
 #endif
 
 static struct spi_mem_driver spinand_drv = {

drivers/mtd/nand/spi/gigadevice.c

@@ -13,7 +13,10 @@
 #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS	(1 << 4)
 #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS	(3 << 4)
 
-#define GD5FXGQ4UEXXG_REG_STATUS2		0xf0
+#define GD5FXGQ5XE_STATUS_ECC_1_4_BITFLIPS	(1 << 4)
+#define GD5FXGQ5XE_STATUS_ECC_4_BITFLIPS	(3 << 4)
+
+#define GD5FXGQXXEXXG_REG_STATUS2		0xf0
 
 #define GD5FXGQ4UXFXXG_STATUS_ECC_MASK		(7 << 4)
 #define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS	(0 << 4)
@@ -102,7 +105,7 @@ static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
-static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
+static int gd5fxgqx_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
 				       struct mtd_oob_region *region)
 {
 	if (section)
@@ -114,7 +117,7 @@ static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
+static int gd5fxgqx_variant2_ooblayout_free(struct mtd_info *mtd, int section,
 					struct mtd_oob_region *region)
 {
 	if (section)
@@ -127,9 +130,10 @@ static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
-	.ecc = gd5fxgq4_variant2_ooblayout_ecc,
-	.free = gd5fxgq4_variant2_ooblayout_free,
+/* Valid for Q4/Q5 and Q6 (untested) devices */
+static const struct mtd_ooblayout_ops gd5fxgqx_variant2_ooblayout = {
+	.ecc = gd5fxgqx_variant2_ooblayout_ecc,
+	.free = gd5fxgqx_variant2_ooblayout_free,
 };
 
 static int gd5fxgq4xc_ooblayout_256_ecc(struct mtd_info *mtd, int section,
@@ -165,7 +169,7 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {
 	u8 status2;
-	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQ4UEXXG_REG_STATUS2,
+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
 						      &status2);
 	int ret;
 
@@ -203,6 +207,43 @@ static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 	return -EINVAL;
 }
 
+static int gd5fxgq5xexxg_ecc_get_status(struct spinand_device *spinand,
+					u8 status)
+{
+	u8 status2;
+	struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQXXEXXG_REG_STATUS2,
+						      &status2);
+	int ret;
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case GD5FXGQ5XE_STATUS_ECC_1_4_BITFLIPS:
+		/*
+		 * Read status2 register to determine a more fine grained
+		 * bit error status
+		 */
+		ret = spi_mem_exec_op(spinand->spimem, &op);
+		if (ret)
+			return ret;
+
+		/*
+		 * 1 ... 4 bits are flipped (and corrected)
+		 */
+		/* bits sorted this way (1...0): ECCSE1, ECCSE0 */
+		return ((status2 & STATUS_ECC_MASK) >> 4) + 1;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
 static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {
@@ -282,7 +323,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     SPINAND_HAS_QE_BIT,
-		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
 	SPINAND_INFO("GD5F1GQ4UFxxG",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb1, 0x48),
@@ -292,8 +333,18 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     SPINAND_HAS_QE_BIT,
-		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
 				     gd5fxgq4ufxxg_ecc_get_status)),
+	SPINAND_INFO("GD5F1GQ5UExxG",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x51),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&gd5fxgqx_variant2_ooblayout,
+				     gd5fxgq5xexxg_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {

include/linux/mtd/nand-ecc-sw-bch.h

@@ -16,7 +16,6 @@
  * @req_ctx: Save request context and tweak the original request to fit the
  *           engine needs
  * @code_size: Number of bytes needed to store a code (one code per step)
- * @nsteps: Number of steps
  * @calc_buf: Buffer to use when calculating ECC bytes
  * @code_buf: Buffer to use when reading (raw) ECC bytes from the chip
  * @bch: BCH control structure
@@ -26,7 +25,6 @@
 struct nand_ecc_sw_bch_conf {
 	struct nand_ecc_req_tweak_ctx req_ctx;
 	unsigned int code_size;
-	unsigned int nsteps;
 	u8 *calc_buf;
 	u8 *code_buf;
 	struct bch_control *bch;

include/linux/mtd/nand-ecc-sw-hamming.h

@@ -17,7 +17,6 @@
  * @req_ctx: Save request context and tweak the original request to fit the
  *           engine needs
  * @code_size: Number of bytes needed to store a code (one code per step)
- * @nsteps: Number of steps
  * @calc_buf: Buffer to use when calculating ECC bytes
  * @code_buf: Buffer to use when reading (raw) ECC bytes from the chip
  * @sm_order: Smart Media special ordering
@@ -25,7 +24,6 @@
 struct nand_ecc_sw_hamming_conf {
 	struct nand_ecc_req_tweak_ctx req_ctx;
 	unsigned int code_size;
-	unsigned int nsteps;
 	u8 *calc_buf;
 	u8 *code_buf;
 	unsigned int sm_order;

include/linux/mtd/nand.h

@@ -231,12 +231,14 @@ struct nand_ops {
 /**
  * struct nand_ecc_context - Context for the ECC engine
  * @conf: basic ECC engine parameters
+ * @nsteps: number of ECC steps
  * @total: total number of bytes used for storing ECC codes, this is used by
  *         generic OOB layouts
  * @priv: ECC engine driver private data
  */
 struct nand_ecc_context {
 	struct nand_ecc_props conf;
+	unsigned int nsteps;
 	unsigned int total;
 	void *priv;
 };
@@ -585,6 +587,26 @@ nanddev_get_ecc_conf(struct nand_device *nand)
 	return &nand->ecc.ctx.conf;
 }
 
+/**
+ * nanddev_get_ecc_nsteps() - Extract the number of ECC steps
+ * @nand: NAND device
+ */
+static inline unsigned int
+nanddev_get_ecc_nsteps(struct nand_device *nand)
+{
+	return nand->ecc.ctx.nsteps;
+}
+
+/**
+ * nanddev_get_ecc_bytes_per_step() - Extract the number of ECC bytes per step
+ * @nand: NAND device
+ */
+static inline unsigned int
+nanddev_get_ecc_bytes_per_step(struct nand_device *nand)
+{
+	return nand->ecc.ctx.total / nand->ecc.ctx.nsteps;
+}
+
 /**
  * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND
  *                                  device

include/linux/mtd/rawnand.h

@@ -1035,6 +1035,16 @@ struct nand_manufacturer {
 	void *priv;
 };
 
+/**
+ * struct nand_secure_region - NAND secure region structure
+ * @offset: Offset of the start of the secure region
+ * @size: Size of the secure region
+ */
+struct nand_secure_region {
+	u64 offset;
+	u64 size;
+};
+
 /**
  * struct nand_chip - NAND Private Flash Chip Data
  * @base: Inherit from the generic NAND device
@@ -1085,6 +1095,8 @@ struct nand_manufacturer {
  *          NAND Controller drivers should not modify this value, but they're
  *          allowed to read it.
  * @read_retries: The number of read retry modes supported
+ * @secure_regions: Structure containing the secure regions info
+ * @nr_secure_regions: Number of secure regions
  * @controller: The hardware controller	structure which is shared among multiple
  *              independent devices
  * @ecc: The ECC controller structure
@@ -1134,6 +1146,8 @@ struct nand_chip {
 	unsigned int suspended : 1;
 	int cur_cs;
 	int read_retries;
+	struct nand_secure_region *secure_regions;
+	u8 nr_secure_regions;
 
 	/* Externals */
 	struct nand_controller *controller;