Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SERIAL] sunsu: Fix section mismatch warnings.
  [SPARC64]: pgtable_cache_init() should be __init.
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/prom.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/pci.c
  [SPARC64]: Fix section mismatch warnings in arch/sparc64/kernel/console.c
  [MM]: sparse_init() should be __init.
  [SPARC64]: Update defconfig.
  [VIDEO]: Add Sun XVR-2500 framebuffer driver.
  [VIDEO]: Add Sun XVR-500 framebuffer driver.
  [SPARC64]: SUN4U PCI-E controller support.
  [SPARC]: Fix comment typo in smp4m_blackbox_current().
  [SCSI] SUNESP: sun_esp.c needs linux/delay.h

Fix up conflict in arch/sparc64/mm/init.c manually due to removal of
pgtable_cache_init() through the -mm patches (even though that patch was
also by David ;)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/sparc/kernel/sun4m_smp.c

@@ -405,7 +405,7 @@ void __init smp4m_blackbox_current(unsigned *addr)
 	
 	addr[0] = 0x81580000 | rd;		/* rd %tbr, reg */
 	addr[2] = 0x8130200a | rd | rs1;    	/* srl reg, 0xa, reg */
-	addr[4] = 0x8008200c | rd | rs1;	/* and reg, 3, reg */
+	addr[4] = 0x8008200c | rd | rs1;	/* and reg, 0xc, reg */
 }
 
 void __init sun4m_init_smp(void)

arch/sparc64/defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 17 14:18:44 2007
+# Linux kernel version: 2.6.21
+# Sun May  6 22:46:54 2007
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TIME_INTERPOLATION=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
@@ -108,6 +109,9 @@ CONFIG_GENERIC_HARDIRQS=y
 #
 # General machine setup
 #
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 # CONFIG_SMP is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=m
@@ -140,8 +144,7 @@ CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_STATIC=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -151,6 +154,7 @@ CONFIG_SUN_AUXIO=y
 CONFIG_SUN_IO=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_SUN_OPENPROMFS=m
@@ -178,7 +182,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -219,6 +222,7 @@ CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
@@ -292,6 +296,14 @@ CONFIG_NET_TCPPROBE=m
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 
 #
@@ -312,10 +324,6 @@ CONFIG_FW_LOADER=y
 # Connector - unified userspace <-> kernelspace linker
 #
 CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
 
 #
@@ -383,7 +391,6 @@ CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_IDEDMA_ONLYDISK=y
 # CONFIG_BLK_DEV_AEC62XX is not set
 CONFIG_BLK_DEV_ALI15X3=y
@@ -413,7 +420,6 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -443,6 +449,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -485,6 +492,7 @@ CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_SRP is not set
 
@@ -628,9 +636,10 @@ CONFIG_BNX2=m
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
 # Wan interfaces
@@ -695,6 +704,12 @@ CONFIG_KEYBOARD_LKKBD=m
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=y
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
@@ -702,6 +717,7 @@ CONFIG_MOUSE_SERIAL=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_SPARCSPKR=y
 # CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Hardware I/O ports
@@ -763,11 +779,8 @@ CONFIG_RTC=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
 
 #
@@ -791,17 +804,17 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -912,7 +925,7 @@ CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 
 #
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
 #
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
@@ -937,6 +950,8 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_XVR500 is not set
+# CONFIG_FB_XVR2500 is not set
 # CONFIG_FB_PCI is not set
 # CONFIG_FB_VIRTUAL is not set
 
@@ -1093,6 +1108,14 @@ CONFIG_AC97_BUS=m
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+
 #
 # USB support
 #
@@ -1106,6 +1129,7 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -1156,10 +1180,6 @@ CONFIG_USB_STORAGE=m
 #
 # USB Input Devices
 #
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
 # CONFIG_USB_ACECAD is not set
@@ -1524,6 +1544,7 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m

arch/sparc64/kernel/Makefile

@@ -17,7 +17,7 @@ obj-y		:= process.o setup.o cpu.o idprom.o \
 obj-$(CONFIG_STACKTRACE) += stacktrace.o
 obj-$(CONFIG_PCI)	 += ebus.o isa.o pci_common.o pci_iommu.o \
 			    pci_psycho.o pci_sabre.o pci_schizo.o \
-			    pci_sun4v.o pci_sun4v_asm.o
+			    pci_sun4v.o pci_sun4v_asm.o pci_fire.o
 obj-$(CONFIG_SMP)	 += smp.o trampoline.o
 obj-$(CONFIG_SPARC32_COMPAT) += sys32.o sys_sparc32.o signal32.o
 obj-$(CONFIG_BINFMT_ELF32) += binfmt_elf32.o

arch/sparc64/kernel/central.c

@@ -98,7 +98,7 @@ void apply_central_ranges(struct linux_central *central,
 			    central->num_central_ranges);
 }
 
-void * __init central_alloc_bootmem(unsigned long size)
+static void * __init central_alloc_bootmem(unsigned long size)
 {
 	void *ret;
 
@@ -116,7 +116,7 @@ static unsigned long prom_reg_to_paddr(struct linux_prom_registers *r)
 	return ret | (unsigned long) r->phys_addr;
 }
 
-static void probe_other_fhcs(void)
+static void __init probe_other_fhcs(void)
 {
 	struct device_node *dp;
 	const struct linux_prom64_registers *fpregs;
@@ -298,7 +298,7 @@ static void init_all_fhc_hw(void)
 
 }
 
-void central_probe(void)
+void __init central_probe(void)
 {
 	struct linux_prom_registers fpregs[6];
 	const struct linux_prom_registers *pr;

arch/sparc64/kernel/irq.c

@@ -279,7 +279,7 @@ static void sun4u_irq_enable(unsigned int virt_irq)
 	struct irq_handler_data *data = get_irq_chip_data(virt_irq);
 
 	if (likely(data)) {
-		unsigned long cpuid, imap;
+		unsigned long cpuid, imap, val;
 		unsigned int tid;
 
 		cpuid = irq_choose_cpu(virt_irq);
@@ -287,7 +287,11 @@ static void sun4u_irq_enable(unsigned int virt_irq)
 
 		tid = sun4u_compute_tid(imap, cpuid);
 
-		upa_writel(tid | IMAP_VALID, imap);
+		val = upa_readq(imap);
+		val &= ~(IMAP_TID_UPA | IMAP_TID_JBUS |
+			 IMAP_AID_SAFARI | IMAP_NID_SAFARI);
+		val |= tid | IMAP_VALID;
+		upa_writeq(val, imap);
 	}
 }
 
@@ -297,10 +301,10 @@ static void sun4u_irq_disable(unsigned int virt_irq)
 
 	if (likely(data)) {
 		unsigned long imap = data->imap;
-		u32 tmp = upa_readl(imap);
+		u32 tmp = upa_readq(imap);
 
 		tmp &= ~IMAP_VALID;
-		upa_writel(tmp, imap);
+		upa_writeq(tmp, imap);
 	}
 }
 
@@ -309,7 +313,7 @@ static void sun4u_irq_end(unsigned int virt_irq)
 	struct irq_handler_data *data = get_irq_chip_data(virt_irq);
 
 	if (likely(data))
-		upa_writel(ICLR_IDLE, data->iclr);
+		upa_writeq(ICLR_IDLE, data->iclr);
 }
 
 static void sun4v_irq_enable(unsigned int virt_irq)
@@ -465,7 +469,7 @@ unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap)
 
 	BUG_ON(tlb_type == hypervisor);
 
-	ino = (upa_readl(imap) & (IMAP_IGN | IMAP_INO)) + inofixup;
+	ino = (upa_readq(imap) & (IMAP_IGN | IMAP_INO)) + inofixup;
 	bucket = &ivector_table[ino];
 	if (!bucket->virt_irq) {
 		bucket->virt_irq = virt_irq_alloc(__irq(bucket));

arch/sparc64/kernel/pci.c

@@ -190,6 +190,7 @@ extern void schizo_init(struct device_node *, const char *);
 extern void schizo_plus_init(struct device_node *, const char *);
 extern void tomatillo_init(struct device_node *, const char *);
 extern void sun4v_pci_init(struct device_node *, const char *);
+extern void fire_pci_init(struct device_node *, const char *);
 
 static struct {
 	char *model_name;
@@ -207,6 +208,7 @@ static struct {
 	{ "SUNW,tomatillo", tomatillo_init },
 	{ "pci108e,a801", tomatillo_init },
 	{ "SUNW,sun4v-pci", sun4v_pci_init },
+	{ "pciex108e,80f0", fire_pci_init },
 };
 #define PCI_NUM_CONTROLLER_TYPES (sizeof(pci_controller_table) / \
 				  sizeof(pci_controller_table[0]))
@@ -436,6 +438,13 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	printk("    class: 0x%x device name: %s\n",
 	       dev->class, pci_name(dev));
 
+	/* I have seen IDE devices which will not respond to
+	 * the bmdma simplex check reads if bus mastering is
+	 * disabled.
+	 */
+	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
+		pci_set_master(dev);
+
 	dev->current_state = 4;		/* unknown power state */
 	dev->error_state = pci_channel_io_normal;
 
@@ -468,7 +477,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	return dev;
 }
 
-static void __init apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p)
+static void __devinit apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p)
 {
 	u32 idx, first, last;
 
@@ -497,9 +506,9 @@ static void __init pci_resource_adjust(struct resource *res,
 /* Cook up fake bus resources for SUNW,simba PCI bridges which lack
  * a proper 'ranges' property.
  */
-static void __init apb_fake_ranges(struct pci_dev *dev,
-				   struct pci_bus *bus,
-				   struct pci_pbm_info *pbm)
+static void __devinit apb_fake_ranges(struct pci_dev *dev,
+				      struct pci_bus *bus,
+				      struct pci_pbm_info *pbm)
 {
 	struct resource *res;
 	u32 first, last;
@@ -522,15 +531,15 @@ static void __init apb_fake_ranges(struct pci_dev *dev,
 	pci_resource_adjust(res, &pbm->mem_space);
 }
 
-static void __init pci_of_scan_bus(struct pci_pbm_info *pbm,
-				   struct device_node *node,
-				   struct pci_bus *bus);
+static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm,
+				      struct device_node *node,
+				      struct pci_bus *bus);
 
 #define GET_64BIT(prop, i)	((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1])
 
-void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
-				  struct device_node *node,
-				  struct pci_dev *dev)
+static void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
+					 struct device_node *node,
+					 struct pci_dev *dev)
 {
 	struct pci_bus *bus;
 	const u32 *busrange, *ranges;
@@ -629,9 +638,9 @@ void __devinit of_scan_pci_bridge(struct pci_pbm_info *pbm,
 	pci_of_scan_bus(pbm, node, bus);
 }
 
-static void __init pci_of_scan_bus(struct pci_pbm_info *pbm,
-				   struct device_node *node,
-				   struct pci_bus *bus)
+static void __devinit pci_of_scan_bus(struct pci_pbm_info *pbm,
+				      struct device_node *node,
+				      struct pci_bus *bus)
 {
 	struct device_node *child;
 	const u32 *reg;
@@ -733,7 +742,7 @@ int pci_host_bridge_write_pci_cfg(struct pci_bus *bus_dev,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-struct pci_bus * __init pci_scan_one_pbm(struct pci_pbm_info *pbm)
+struct pci_bus * __devinit pci_scan_one_pbm(struct pci_pbm_info *pbm)
 {
 	struct pci_controller_info *p = pbm->parent;
 	struct device_node *node = pbm->prom_node;

arch/sparc64/kernel/pci_iommu.c

@@ -37,17 +37,21 @@
 /* Must be invoked under the IOMMU lock. */
 static void __iommu_flushall(struct iommu *iommu)
 {
-	unsigned long tag;
-	int entry;
+	if (iommu->iommu_flushinv) {
+		pci_iommu_write(iommu->iommu_flushinv, ~(u64)0);
+	} else {
+		unsigned long tag;
+		int entry;
 
-	tag = iommu->iommu_flush + (0xa580UL - 0x0210UL);
-	for (entry = 0; entry < 16; entry++) {
-		pci_iommu_write(tag, 0);
-		tag += 8;
-	}
+		tag = iommu->iommu_flush + (0xa580UL - 0x0210UL);
+		for (entry = 0; entry < 16; entry++) {
+			pci_iommu_write(tag, 0);
+			tag += 8;
+		}
 
-	/* Ensure completion of previous PIO writes. */
-	(void) pci_iommu_read(iommu->write_complete_reg);
+		/* Ensure completion of previous PIO writes. */
+		(void) pci_iommu_read(iommu->write_complete_reg);
+	}
 }
 
 #define IOPTE_CONSISTENT(CTX) \

arch/sparc64/kernel/prom.c

@@ -386,11 +386,9 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 
 	/* Now build the IRQ bucket. */
 	imap = controller_regs + imap_off;
-	imap += 4;
 
 	iclr_off = psycho_iclr_offset(ino);
 	iclr = controller_regs + iclr_off;
-	iclr += 4;
 
 	if ((ino & 0x20) == 0)
 		inofixup = ino & 0x03;
@@ -398,7 +396,7 @@ static unsigned int psycho_irq_build(struct device_node *dp,
 	return build_irq(inofixup, iclr, imap);
 }
 
-static void psycho_irq_trans_init(struct device_node *dp)
+static void __init psycho_irq_trans_init(struct device_node *dp)
 {
 	const struct linux_prom64_registers *regs;
 
@@ -613,11 +611,9 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 
 	/* Now build the IRQ bucket. */
 	imap = controller_regs + imap_off;
-	imap += 4;
 
 	iclr_off = sabre_iclr_offset(ino);
 	iclr = controller_regs + iclr_off;
-	iclr += 4;
 
 	if ((ino & 0x20) == 0)
 		inofixup = ino & 0x03;
@@ -640,7 +636,7 @@ static unsigned int sabre_irq_build(struct device_node *dp,
 	return virt_irq;
 }
 
-static void sabre_irq_trans_init(struct device_node *dp)
+static void __init sabre_irq_trans_init(struct device_node *dp)
 {
 	const struct linux_prom64_registers *regs;
 	struct sabre_irq_data *irq_data;
@@ -679,13 +675,14 @@ static unsigned long schizo_iclr_offset(unsigned long ino)
 static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
 					unsigned int ino)
 {
-	return pbm_regs + schizo_iclr_offset(ino) + 4;
+
+	return pbm_regs + schizo_iclr_offset(ino);
 }
 
 static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
 					unsigned int ino)
 {
-	return pbm_regs + schizo_imap_offset(ino) + 4;
+	return pbm_regs + schizo_imap_offset(ino);
 }
 
 #define schizo_read(__reg) \
@@ -796,7 +793,8 @@ static unsigned int schizo_irq_build(struct device_node *dp,
 	return virt_irq;
 }
 
-static void __schizo_irq_trans_init(struct device_node *dp, int is_tomatillo)
+static void __init __schizo_irq_trans_init(struct device_node *dp,
+					   int is_tomatillo)
 {
 	const struct linux_prom64_registers *regs;
 	struct schizo_irq_data *irq_data;
@@ -818,12 +816,12 @@ static void __schizo_irq_trans_init(struct device_node *dp, int is_tomatillo)
 	irq_data->chip_version = of_getintprop_default(dp, "version#", 0);
 }
 
-static void schizo_irq_trans_init(struct device_node *dp)
+static void __init schizo_irq_trans_init(struct device_node *dp)
 {
 	__schizo_irq_trans_init(dp, 0);
 }
 
-static void tomatillo_irq_trans_init(struct device_node *dp)
+static void __init tomatillo_irq_trans_init(struct device_node *dp)
 {
 	__schizo_irq_trans_init(dp, 1);
 }
@@ -837,7 +835,7 @@ static unsigned int pci_sun4v_irq_build(struct device_node *dp,
 	return sun4v_build_irq(devhandle, devino);
 }
 
-static void pci_sun4v_irq_trans_init(struct device_node *dp)
+static void __init pci_sun4v_irq_trans_init(struct device_node *dp)
 {
 	const struct linux_prom64_registers *regs;
 
@@ -848,6 +846,85 @@ static void pci_sun4v_irq_trans_init(struct device_node *dp)
 	dp->irq_trans->data = (void *) (unsigned long)
 		((regs->phys_addr >> 32UL) & 0x0fffffff);
 }
+
+struct fire_irq_data {
+	unsigned long pbm_regs;
+	u32 portid;
+};
+
+#define FIRE_IMAP_BASE	0x001000
+#define FIRE_ICLR_BASE	0x001400
+
+static unsigned long fire_imap_offset(unsigned long ino)
+{
+	return FIRE_IMAP_BASE + (ino * 8UL);
+}
+
+static unsigned long fire_iclr_offset(unsigned long ino)
+{
+	return FIRE_ICLR_BASE + (ino * 8UL);
+}
+
+static unsigned long fire_ino_to_iclr(unsigned long pbm_regs,
+					    unsigned int ino)
+{
+	return pbm_regs + fire_iclr_offset(ino);
+}
+
+static unsigned long fire_ino_to_imap(unsigned long pbm_regs,
+					    unsigned int ino)
+{
+	return pbm_regs + fire_imap_offset(ino);
+}
+
+static unsigned int fire_irq_build(struct device_node *dp,
+					 unsigned int ino,
+					 void *_data)
+{
+	struct fire_irq_data *irq_data = _data;
+	unsigned long pbm_regs = irq_data->pbm_regs;
+	unsigned long imap, iclr;
+	unsigned long int_ctrlr;
+
+	ino &= 0x3f;
+
+	/* Now build the IRQ bucket. */
+	imap = fire_ino_to_imap(pbm_regs, ino);
+	iclr = fire_ino_to_iclr(pbm_regs, ino);
+
+	/* Set the interrupt controller number.  */
+	int_ctrlr = 1 << 6;
+	upa_writeq(int_ctrlr, imap);
+
+	/* The interrupt map registers do not have an INO field
+	 * like other chips do.  They return zero in the INO
+	 * field, and the interrupt controller number is controlled
+	 * in bits 6 thru 9.  So in order for build_irq() to get
+	 * the INO right we pass it in as part of the fixup
+	 * which will get added to the map register zero value
+	 * read by build_irq().
+	 */
+	ino |= (irq_data->portid << 6);
+	ino -= int_ctrlr;
+	return build_irq(ino, iclr, imap);
+}
+
+static void __init fire_irq_trans_init(struct device_node *dp)
+{
+	const struct linux_prom64_registers *regs;
+	struct fire_irq_data *irq_data;
+
+	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
+	dp->irq_trans->irq_build = fire_irq_build;
+
+	irq_data = prom_early_alloc(sizeof(struct fire_irq_data));
+
+	regs = of_get_property(dp, "reg", NULL);
+	dp->irq_trans->data = irq_data;
+
+	irq_data->pbm_regs = regs[0].phys_addr;
+	irq_data->portid = of_getintprop_default(dp, "portid", 0);
+}
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_SBUS
@@ -995,7 +1072,7 @@ static unsigned int sbus_of_build_irq(struct device_node *dp,
 	return build_irq(sbus_level, iclr, imap);
 }
 
-static void sbus_irq_trans_init(struct device_node *dp)
+static void __init sbus_irq_trans_init(struct device_node *dp)
 {
 	const struct linux_prom64_registers *regs;
 
@@ -1042,7 +1119,7 @@ static unsigned int central_build_irq(struct device_node *dp,
 	return build_irq(0, iclr, imap);
 }
 
-static void central_irq_trans_init(struct device_node *dp)
+static void __init central_irq_trans_init(struct device_node *dp)
 {
 	dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
 	dp->irq_trans->irq_build = central_build_irq;
@@ -1056,7 +1133,7 @@ struct irq_trans {
 };
 
 #ifdef CONFIG_PCI
-static struct irq_trans pci_irq_trans_table[] = {
+static struct irq_trans __initdata pci_irq_trans_table[] = {
 	{ "SUNW,sabre", sabre_irq_trans_init },
 	{ "pci108e,a000", sabre_irq_trans_init },
 	{ "pci108e,a001", sabre_irq_trans_init },
@@ -1069,6 +1146,7 @@ static struct irq_trans pci_irq_trans_table[] = {
 	{ "SUNW,tomatillo", tomatillo_irq_trans_init },
 	{ "pci108e,a801", tomatillo_irq_trans_init },
 	{ "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
+	{ "pciex108e,80f0", fire_irq_trans_init },
 };
 #endif
 
@@ -1081,7 +1159,7 @@ static unsigned int sun4v_vdev_irq_build(struct device_node *dp,
 	return sun4v_build_irq(devhandle, devino);
 }
 
-static void sun4v_vdev_irq_trans_init(struct device_node *dp)
+static void __init sun4v_vdev_irq_trans_init(struct device_node *dp)
 {
 	const struct linux_prom64_registers *regs;
 
@@ -1093,7 +1171,7 @@ static void sun4v_vdev_irq_trans_init(struct device_node *dp)
 		((regs->phys_addr >> 32UL) & 0x0fffffff);
 }
 
-static void irq_trans_init(struct device_node *dp)
+static void __init irq_trans_init(struct device_node *dp)
 {
 #ifdef CONFIG_PCI
 	const char *model;

drivers/scsi/sun_esp.c

@@ -5,6 +5,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/init.h>
 

drivers/serial/sunsu.c

@@ -1312,7 +1312,7 @@ static void sunsu_console_write(struct console *co, const char *s,
  *	- initialize the serial port
  *	Return non-zero if we didn't find a serial port.
  */
-static int sunsu_console_setup(struct console *co, char *options)
+static int __init sunsu_console_setup(struct console *co, char *options)
 {
 	struct uart_port *port;
 	int baud = 9600;
@@ -1343,7 +1343,7 @@ static int sunsu_console_setup(struct console *co, char *options)
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
-static struct console sunsu_cons = {
+static struct console sunsu_console = {
 	.name	=	"ttyS",
 	.write	=	sunsu_console_write,
 	.device	=	uart_console_device,
@@ -1373,9 +1373,9 @@ static inline struct console *SUNSU_CONSOLE(int num_uart)
 	if (i == num_uart)
 		return NULL;
 
-	sunsu_cons.index = i;
+	sunsu_console.index = i;
 
-	return &sunsu_cons;
+	return &sunsu_console;
 }
 #else
 #define SUNSU_CONSOLE(num_uart)		(NULL)

drivers/video/Kconfig

@@ -1383,6 +1383,32 @@ config FB_LEO
 	  This is the frame buffer device driver for the SBUS-based Sun ZX
 	  (leo) frame buffer cards.
 
+config FB_XVR500
+	bool "Sun XVR-500 3DLABS Wildcat support"
+	depends on FB && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firwmare has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR2500
+	bool "Sun XVR-2500 3DLABS Wildcat support"
+	depends on FB && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-2500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firwmare has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
 config FB_PCI
 	bool "PCI framebuffers"
 	depends on (FB = y) && PCI && SPARC

drivers/video/Makefile

@@ -67,6 +67,8 @@ obj-$(CONFIG_FB_ATARI)            += atafb.o c2p.o atafb_mfb.o \
                                      atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
 obj-$(CONFIG_FB_MAC)              += macfb.o
 obj-$(CONFIG_FB_HGA)              += hgafb.o
+obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
+obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
 obj-$(CONFIG_FB_IGA)              += igafb.o
 obj-$(CONFIG_FB_APOLLO)           += dnfb.o
 obj-$(CONFIG_FB_Q40)              += q40fb.o

drivers/video/sunxvr2500.c

+/* s3d.c: Sun 3DLABS XVR-2500 et al. driver for sparc64 systems
+ *
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct s3d_info {
+	struct fb_info		*info;
+	struct pci_dev		*pdev;
+
+	char __iomem		*fb_base;
+	unsigned long		fb_base_phys;
+
+	struct device_node	*of_node;
+
+	unsigned int		width;
+	unsigned int		height;
+	unsigned int		depth;
+	unsigned int		fb_size;
+
+	u32			pseudo_palette[256];
+};
+
+static int __devinit s3d_get_props(struct s3d_info *sp)
+{
+	sp->width = of_getintprop_default(sp->of_node, "width", 0);
+	sp->height = of_getintprop_default(sp->of_node, "height", 0);
+	sp->depth = of_getintprop_default(sp->of_node, "depth", 8);
+
+	if (!sp->width || !sp->height) {
+		printk(KERN_ERR "s3d: Critical properties missing for %s\n",
+		       pci_name(sp->pdev));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int s3d_setcolreg(unsigned regno,
+			 unsigned red, unsigned green, unsigned blue,
+			 unsigned transp, struct fb_info *info)
+{
+	u32 value;
+
+	if (regno >= 256)
+		return 1;
+
+	red >>= 8;
+	green >>= 8;
+	blue >>= 8;
+
+	value = (blue << 24) | (green << 16) | (red << 8);
+	((u32 *)info->pseudo_palette)[regno] = value;
+
+	return 0;
+}
+
+static struct fb_ops s3d_ops = {
+	.owner			= THIS_MODULE,
+	.fb_setcolreg		= s3d_setcolreg,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+};
+
+static int __devinit s3d_set_fbinfo(struct s3d_info *sp)
+{
+	struct fb_info *info = sp->info;
+	struct fb_var_screeninfo *var = &info->var;
+
+	info->flags = FBINFO_DEFAULT;
+	info->fbops = &s3d_ops;
+	info->screen_base = sp->fb_base;
+	info->screen_size = sp->fb_size;
+
+	info->pseudo_palette = sp->pseudo_palette;
+
+	/* Fill fix common fields */
+	strlcpy(info->fix.id, "s3d", sizeof(info->fix.id));
+        info->fix.smem_start = sp->fb_base_phys;
+        info->fix.smem_len = sp->fb_size;
+        info->fix.type = FB_TYPE_PACKED_PIXELS;
+	if (sp->depth == 32 || sp->depth == 24)
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+	else
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+
+	var->xres = sp->width;
+	var->yres = sp->height;
+	var->xres_virtual = var->xres;
+	var->yres_virtual = var->yres;
+	var->bits_per_pixel = sp->depth;
+
+	var->red.offset = 8;
+	var->red.length = 8;
+	var->green.offset = 16;
+	var->green.length = 8;
+	var->blue.offset = 24;
+	var->blue.length = 8;
+	var->transp.offset = 0;
+	var->transp.length = 0;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0)) {
+		printk(KERN_ERR "s3d: Cannot allocate color map.\n");
+		return -ENOMEM;
+	}
+
+        return 0;
+}
+
+static int __devinit s3d_pci_register(struct pci_dev *pdev,
+				      const struct pci_device_id *ent)
+{
+	struct fb_info *info;
+	struct s3d_info *sp;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err < 0) {
+		printk(KERN_ERR "s3d: Cannot enable PCI device %s\n",
+		       pci_name(pdev));
+		goto err_out;
+	}
+
+	info = framebuffer_alloc(sizeof(struct s3d_info), &pdev->dev);
+	if (!info) {
+		printk(KERN_ERR "s3d: Cannot allocate fb_info\n");
+		err = -ENOMEM;
+		goto err_disable;
+	}
+
+	sp = info->par;
+	sp->info = info;
+	sp->pdev = pdev;
+	sp->of_node = pci_device_to_OF_node(pdev);
+	if (!sp->of_node) {
+		printk(KERN_ERR "s3d: Cannot find OF node of %s\n",
+		       pci_name(pdev));
+		err = -ENODEV;
+		goto err_release_fb;
+	}
+
+	sp->fb_base_phys = pci_resource_start (pdev, 1);
+
+	err = pci_request_region(pdev, 1, "s3d framebuffer");
+	if (err < 0) {
+		printk("s3d: Cannot request region 1 for %s\n",
+		       pci_name(pdev));
+		goto err_release_fb;
+	}
+
+	err = s3d_get_props(sp);
+	if (err)
+		goto err_release_pci;
+
+	/* XXX 'linebytes' is often wrong, it is equal to the width
+	 * XXX with depth of 32 on my XVR-2500 which is clearly not
+	 * XXX right.  So we don't try to use it.
+	 */
+	switch (sp->depth) {
+	case 8:
+		info->fix.line_length = sp->width;
+		break;
+	case 16:
+		info->fix.line_length = sp->width * 2;
+		break;
+	case 24:
+		info->fix.line_length = sp->width * 3;
+		break;
+	case 32:
+		info->fix.line_length = sp->width * 4;
+		break;
+	}
+	sp->fb_size = info->fix.line_length * sp->height;
+
+	sp->fb_base = ioremap(sp->fb_base_phys, sp->fb_size);
+	if (!sp->fb_base)
+		goto err_release_pci;
+
+	err = s3d_set_fbinfo(sp);
+	if (err)
+		goto err_unmap_fb;
+
+	pci_set_drvdata(pdev, info);
+
+	printk("s3d: Found device at %s\n", pci_name(pdev));
+
+	err = register_framebuffer(info);
+	if (err < 0) {
+		printk(KERN_ERR "s3d: Could not register framebuffer %s\n",
+		       pci_name(pdev));
+		goto err_unmap_fb;
+	}
+
+	return 0;
+
+err_unmap_fb:
+	iounmap(sp->fb_base);
+
+err_release_pci:
+	pci_release_region(pdev, 1);
+
+err_release_fb:
+        framebuffer_release(info);
+
+err_disable:
+	pci_disable_device(pdev);
+
+err_out:
+	return err;
+}
+
+static void __devexit s3d_pci_unregister(struct pci_dev *pdev)
+{
+	struct fb_info *info = pci_get_drvdata(pdev);
+	struct s3d_info *sp = info->par;
+
+	unregister_framebuffer(info);
+
+	iounmap(sp->fb_base);
+
+	pci_release_region(pdev, 1);
+
+        framebuffer_release(info);
+
+	pci_disable_device(pdev);
+}
+
+static struct pci_device_id s3d_pci_table[] = {
+	{	/* XVR-2500 */
+		PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x0032),
+		.driver_data = 1,
+	},
+	{	/* XVR-500 */
+		PCI_DEVICE(PCI_VENDOR_ID_3DLABS, 0x07a2),
+		.driver_data = 0,
+	},
+	{ 0, }
+};
+
+static struct pci_driver s3d_driver = {
+	.name		= "s3d",
+	.id_table	= s3d_pci_table,
+	.probe		= s3d_pci_register,
+	.remove		= __devexit_p(s3d_pci_unregister),
+};
+
+static int __init s3d_init(void)
+{
+	if (fb_get_options("s3d", NULL))
+		return -ENODEV;
+
+	return pci_register_driver(&s3d_driver);
+}
+
+static void __exit s3d_exit(void)
+{
+	pci_unregister_driver(&s3d_driver);
+}
+
+module_init(s3d_init);
+module_exit(s3d_exit);
+
+MODULE_DESCRIPTION("framebuffer driver for Sun XVR-2500 graphics");
+MODULE_AUTHOR("David S. Miller <davem@davemloft.net>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");

include/asm-sparc64/iommu.h

@@ -32,6 +32,7 @@ struct iommu {
 	unsigned long		iommu_control;
 	unsigned long		iommu_tsbbase;
 	unsigned long		iommu_flush;
+	unsigned long		iommu_flushinv;
 	unsigned long		iommu_ctxflush;
 	unsigned long		write_complete_reg;
 	unsigned long		dummy_page;

mm/sparse.c

@@ -272,7 +272,7 @@ static void __kfree_section_memmap(struct page *memmap, unsigned long nr_pages)
  * Allocate the accumulated non-linear sections, allocate a mem_map
  * for each and record the physical to section mapping.
  */
-void sparse_init(void)
+void __init sparse_init(void)
 {
 	unsigned long pnum;
 	struct page *map;