Commit efc1aaa5 authored by Sebastian Hesselbarth's avatar Sebastian Hesselbarth Committed by Gregory CLEMENT

ARM: dt: mvebu: ix4-300d: move partitions to partition sub-node

NAND flash partitions should be part of a partitions sub-node
not the flash node itself. Move the partitions which will also
allow different bootloaders get rid of the stock partitions
easily by removing the partitions node.
Signed-off-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 0cea5f71
......@@ -151,37 +151,42 @@ nand@d0000 {
marvell,nand-enable-arbiter;
nand-on-flash-bbt;
partition@0 {
label = "u-boot";
reg = <0x0000000 0xe0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x20000>;
read-only;
};
partition@100000 {
label = "u-boot-env2";
reg = <0x100000 0x20000>;
read-only;
};
partition@120000 {
label = "zImage";
reg = <0x120000 0x400000>;
};
partition@520000 {
label = "initrd";
reg = <0x520000 0x400000>;
};
partition@xE00000 {
label = "boot";
reg = <0xE00000 0x3F200000>;
partitions {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0000000 0xe0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x20000>;
read-only;
};
partition@100000 {
label = "u-boot-env2";
reg = <0x100000 0x20000>;
read-only;
};
partition@120000 {
label = "zImage";
reg = <0x120000 0x400000>;
};
partition@520000 {
label = "initrd";
reg = <0x520000 0x400000>;
};
partition@xE00000 {
label = "boot";
reg = <0xE00000 0x3F200000>;
};
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment