ARM: dts: rockchip: rename and label gpio-led subnodes

Current dts files with 'gpio-led' nodes were manually verified.
In order to automate this process leds-gpio.txt
has been converted to yaml. With this conversion a check
for pattern properties was added. A test with the command
below gives a screen full of warnings like:

arch/arm/boot/dts/rk3188-radxarock.dt.yaml: gpio-leds:
'blue', 'green', 'sleep'
do not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'

Fix these errors with help of the following rules:

1: Add nodename in the preferred form.

2: Always add a label that ends with '_led' to prevent conflicts
   with other labels such as 'power' and 'mmc'

3: If leds need pinctrl add a label that ends with '_led_pin'
   also to prevent conflicts with other labels.

patternProperties:
  # The first form is preferred, but fall back to just 'led'
  # anywhere in the node name to at least catch some child nodes.
  "(^led-[0-9a-f]$|led)":

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/leds/
leds-gpio.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200428144933.10953-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm/boot/dts/rk3036-kylin.dts

@@ -16,7 +16,7 @@ memory@60000000 {
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
 			label = "kylin:red:led";
 			pinctrl-names = "default";

arch/arm/boot/dts/rk3066a-mk808.dts

@@ -22,7 +22,7 @@ memory@60000000 {
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		blue_led: led-0 {
 			label = "mk808:blue:power";
 			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -33,19 +33,19 @@ power {
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green {
+		green_led: led-0 {
 			label = "rock:green:user1";
 			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		blue {
+		blue_led: led-1 {
 			label = "rock:blue:user2";
 			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		sleep {
+		sleep_led: led-2 {
 			label = "rock:red:power";
 			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";

arch/arm/boot/dts/rk3229-xms6.dts

@@ -33,7 +33,7 @@ ext_gmac: ext_gmac {
 	power-led {
 		compatible = "gpio-leds";
 
-		blue {
+		blue_led: led-0 {
 			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};

arch/arm/boot/dts/rk3288-firefly-reload.dts

@@ -45,20 +45,20 @@ ir-receiver {
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		power_led: led-0 {
 			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:power";
 			pinctrl-names = "default";
-			pinctrl-0 = <&power_led>;
+			pinctrl-0 = <&power_led_pin>;
 			panic-indicator;
 		};
 
-		work {
+		work_led: led-1 {
 			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:user";
 			linux,default-trigger = "rc-feedback";
 			pinctrl-names = "default";
-			pinctrl-0 = <&work_led>;
+			pinctrl-0 = <&work_led_pin>;
 		};
 	};
 
@@ -334,11 +334,11 @@ pwr_key: pwr-key {
 	};
 
 	leds {
-		power_led: power-led {
+		power_led_pin: power-led-pin {
 			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led: work-led {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm/boot/dts/rk3288-firefly.dtsi

@@ -62,20 +62,20 @@ power {
 	leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:user";
 			linux,default-trigger = "rc-feedback";
 			pinctrl-names = "default";
-			pinctrl-0 = <&work_led>;
+			pinctrl-0 = <&work_led_pin>;
 		};
 
-		power {
+		power_led: led-1 {
 			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "firefly:green:power";
 			linux,default-trigger = "default-on";
 			pinctrl-names = "default";
-			pinctrl-0 = <&power_led>;
+			pinctrl-0 = <&power_led_pin>;
 		};
 	};
 
@@ -429,11 +429,11 @@ pwr_key: pwr-key {
 	};
 
 	leds {
-		power_led: power-led {
+		power_led_pin: power-led-pin {
 			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led: work-led {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};

arch/arm/boot/dts/rk3288-miqi.dts

@@ -30,7 +30,7 @@ ext_gmac: external-gmac-clock {
 	leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
 			label = "miqi:green:user";
 			linux,default-trigger = "timer";

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -36,9 +36,9 @@ ext_gmac: external-gmac-clock {
 	leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_led>;
+		pinctrl-0 = <&user_led_pin>;
 
-		user {
+		user_led: led-0 {
 			label = "green_led";
 			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -372,7 +372,7 @@ phy_rst: phy-rst {
 	};
 
 	leds {
-		user_led: user-led {
+		user_led_pin: user-led-pin {
 			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};

arch/arm/boot/dts/rk3288-rock2-square.dts

@@ -41,13 +41,13 @@ power {
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		heartbeat {
+		heartbeat_led: led-0 {
 			gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
 			label = "rock2:green:state1";
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		mmc_led: led-1 {
 			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
 			label = "rock2:blue:state2";
 			linux,default-trigger = "mmc0";

arch/arm/boot/dts/rk3288-tinker.dtsi

@@ -46,17 +46,17 @@ button@0 {
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		act-led {
+		act_led: led-0 {
 			gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 
-		heartbeat-led {
+		heartbeat_led: led-1 {
 			gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pwr-led {
+		pwr_led: led-2 {
 			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};