ixgb: finish conversion to ndo_fix_features

Finish conversion to unified ethtool ops: convert get_flags.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c

@@ -634,43 +634,6 @@ ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
 	}
 }
 
-static int ixgb_set_flags(struct net_device *netdev, u32 data)
-{
-	struct ixgb_adapter *adapter = netdev_priv(netdev);
-	bool need_reset;
-	int rc;
-
-	/*
-	 * Tx VLAN insertion does not work per HW design when Rx stripping is
-	 * disabled.  Disable txvlan when rxvlan is turned off, and enable
-	 * rxvlan when txvlan is turned on.
-	 */
-	if (!(data & ETH_FLAG_RXVLAN) &&
-	    (netdev->features & NETIF_F_HW_VLAN_TX))
-		data &= ~ETH_FLAG_TXVLAN;
-	else if (data & ETH_FLAG_TXVLAN)
-		data |= ETH_FLAG_RXVLAN;
-
-	need_reset = (data & ETH_FLAG_RXVLAN) !=
-		     (netdev->features & NETIF_F_HW_VLAN_RX);
-
-	rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
-						ETH_FLAG_TXVLAN);
-	if (rc)
-		return rc;
-
-	if (need_reset) {
-		if (netif_running(netdev)) {
-			ixgb_down(adapter, true);
-			ixgb_up(adapter);
-			ixgb_set_speed_duplex(netdev);
-		} else
-			ixgb_reset(adapter);
-	}
-
-	return 0;
-}
-
 static const struct ethtool_ops ixgb_ethtool_ops = {
 	.get_settings = ixgb_get_settings,
 	.set_settings = ixgb_set_settings,
@@ -691,8 +654,6 @@ static const struct ethtool_ops ixgb_ethtool_ops = {
 	.set_phys_id = ixgb_set_phys_id,
 	.get_sset_count = ixgb_get_sset_count,
 	.get_ethtool_stats = ixgb_get_ethtool_stats,
-	.get_flags = ethtool_op_get_flags,
-	.set_flags = ixgb_set_flags,
 };
 
 void ixgb_set_ethtool_ops(struct net_device *netdev)

drivers/net/ethernet/intel/ixgb/ixgb_main.c

@@ -325,13 +325,26 @@ ixgb_reset(struct ixgb_adapter *adapter)
 	}
 }
 
+static u32
+ixgb_fix_features(struct net_device *netdev, u32 features)
+{
+	/*
+	 * Tx VLAN insertion does not work per HW design when Rx stripping is
+	 * disabled.
+	 */
+	if (!(features & NETIF_F_HW_VLAN_RX))
+		features &= ~NETIF_F_HW_VLAN_TX;
+
+	return features;
+}
+
 static int
 ixgb_set_features(struct net_device *netdev, u32 features)
 {
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	u32 changed = features ^ netdev->features;
 
-	if (!(changed & NETIF_F_RXCSUM))
+	if (!(changed & (NETIF_F_RXCSUM|NETIF_F_HW_VLAN_RX)))
 		return 0;
 
 	adapter->rx_csum = !!(features & NETIF_F_RXCSUM);
@@ -362,6 +375,7 @@ static const struct net_device_ops ixgb_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ixgb_netpoll,
 #endif
+	.ndo_fix_features       = ixgb_fix_features,
 	.ndo_set_features       = ixgb_set_features,
 };
 
@@ -464,10 +478,10 @@ ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	netdev->hw_features = NETIF_F_SG |
 			   NETIF_F_TSO |
-			   NETIF_F_HW_CSUM;
-	netdev->features = netdev->hw_features |
+			   NETIF_F_HW_CSUM |
 			   NETIF_F_HW_VLAN_TX |
-			   NETIF_F_HW_VLAN_RX |
+			   NETIF_F_HW_VLAN_RX;
+	netdev->features = netdev->hw_features |
 			   NETIF_F_HW_VLAN_FILTER;
 	netdev->hw_features |= NETIF_F_RXCSUM;